Since 2016-05-16 we detect infinite recursion directly.
* src/sfnt/ttload.c (tt_face_load_maxp): Don't adjust
`maxComponentDepth'.
* src/truetype/ttgload.c (load_truetype_glyph): Don't abort if
`maxComponentDepth' is not valid. Instead, simply adjust its value
and emit a tracing message.
To match the logic in FDEF. The value of the end is only used for
bound-checking in `Ins_JMPR', so it may not have been obvious that
it was not recorded. Tested (as part of Font Validator 2.0) all the
fonts on Fedora and did not see any change.
* src/truetype/ttinterp.c (Ins_IDEF): Updated.
GETDATA[], opcode 0x92
bytecode instruction. It always returns 17, and we have absolutely
no idea what it is good for...
* src/truetype/ttinterp.c (Pop_Push_Count, opcode_name): Updated.
(Ins_GETDATA): New function.
(TT_RunIns): Add it.
This commit implements undocumented (but confirmed) stuff from
Apple's old bytecode engine.
GETVARIATION[], opcode 0x91
This opcode pushes normalized variation coordinates for all axes
onto the stack (in 2.14 format). Coordinate of first axis gets
pushed first.
GETINFO[], selector bit 3
If GX variation support is enabled, bit 10 of the result is set
to 1.
* src/truetype/ttinterp.c: Include FT_MULTIPLE_MASTERS_H.
(opcode_name) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Updated.
(Ins_GETINFO) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Handle selector
bit 3, checking support for variation glyph hinting.
(Ins_GETVARIATION) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: New function
to implement opcode 0x91.
(TT_RunIns) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Handle opcode 0x91.
This finally fixes the rendering of the cyclist and the lizard in
the `Zycon' font.
* src/truetype/ttgxvar.c (ft_var_readpackedpoints): `first' point
index is always cumulative.
(tt_handle_deltas): Rename to...
(tt_interpolate_deltas): ... This.
Add new parameter for output point array.
Update caller.
(TT_Vary_Apply_Glyph_Deltas): Add `points_out' array; it now holds
the intermediate results of `tt_interpolate_deltas' that are to be
added to `outline->points'.
* src/autofit/afhints.c (af_glyph_hints_dump_segments): Trace
`delta' also.
Don't show first point of segment as a replacement for `pos'; this
is (a) misleading, since the difference to `pos' can be almost
arbitrarily large in corner cases, and (b) it is better to have all
segment data in font units instead of a single value given in output
space coordinates.
Improve layout.
(af_glyph_hints_dump_edges): Show px->units and units->px conversion
values for convenience.
Improve layout.
* src/autofit/afhints.h (AF_SegmentRec): New member `delta'.
* src/autofit/aflatin.c (af_latin_hints_compute_segments): Compute
`delta'.
(af_latin_hints_compute_edges): Reject segments with a delta larger
than 0.5px.
The coordinates of the base font should be used for interpolation
purposes, NOT the current points (i.e., the result of accumulation
of previous deltas).
* src/truetype/ttgxvar.c (TT_Vary_Apply_Glyph_Deltas): Initialize
`points_org' before looping over all tuples.
This commit covers the most important one.
* src/autofit/afmodule.c (af_property_set): Handle `warping',
`darkening-parameters', and `no-stem-darkening'.
* src/cff/cffdrivr.c (cff_property_set): Handle
`darkening-parameters', `hinting-engine', and `no-stem-darkening'.
* src/truetype/ttdriver.c (tt_property_set): Handle
`interpreter-version'.
Recognizing properties follows in another commit.
* devel/ftoption.h, include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES): New macro.
* include/freetype/config/ftstdlib.h (ft_getenv): New macro.
* src/base/ftinit.c (ft_set_default_properties): New function to
parse `FREETYPE_PROPERTIES' and calling `ft_property_string_set'.
(FT_Init_FreeType): Updated.
This is a preparation for handling an `FREETYPE_PROPERTIES'
environment variable to control (some) driver properties.
No change in functionality.
* src/base/ftobjs.c (ft_property_do): Add `value_is_string'
parameter.
(ft_property_string_set): New function.
(FT_Property_Set, FT_Property_Get): Updated.
* include/freetype/internal/ftobjs.h: Updated.
* include/freetype/internal/services/svprop.h
(FT_Properties_SetFunc): Add `value_is_string' parameter.
* src/autofit/afmodule.c (af_property_set), src/cff/cffdrivr.c
(cff_property_set), src/truetype/ttdriver.c (tt_property_set):
Updated, emitting an error currently if `value_is_string' is set.
* Jamfile: Update the directories of the header files scanned for
ftexport.sym. They were incorrect since the migration of the
header files, on 2015-06-22. Either inexisting include/cache
(removed on 2006-03-20) is not needed to be listed explicitly.
Now ftmac.h is scanned only in the case of Mac OS & Mac OS X.
Rasterization sub-banding is utilized at large sizes while using
rather small fixed memory pool. Indeed it is possible to make an
educated guess how much memory is necessary at a given size for a
given glyph. It turns out that, for large majority of European glyphs,
you should store about 8 times more boundary pixels than their height.
Or, vice versa, if your memory pool can hold 800 pixels the band
height should be 100 and you should sub-band anything larger than
that. Should you still run out of memory, FreeType bisects the band
but you have wasted some time. This is what has been implemented in
FreeType since the beginning.
It was overlooked, however, that the top band could grow to twice the
default band size leading to unnecessary memory overflows there. This
commit fixes that. Now the bands are distributed more evenly and
cannot exceed the default size.
Now the magic number 8 is really suitable for rather simple European
scripts. For complex Chinese logograms the magic number should be 13
but that is subject for another day.
* src/smooth/ftgrays.c (gray_convert_glyph): Revise sub-banding
protocol.
Mac OS X linker throws errors when `-exported_symbol_list' input
file includes non-existing symbols. Reported by Ryan Schmidt.
* builds/exports.mk: Exclude ftmac.h from the headers for apinames
by default. Include it when ftmac.c would be compiled.
=========================
Tag sources with `VER-2-6-4'.
* docs/VERSION.TXT: Update documentation and bump version number to
2.6.4.
* README, Jamfile (RefDoc), builds/windows/vc2005/freetype.vcproj,
builds/windows/vc2005/index.html,
builds/windows/vc2008/freetype.vcproj,
builds/windows/vc2008/index.html,
builds/windows/vc2010/freetype.vcxproj,
builds/windows/vc2010/index.html,
builds/windows/visualc/freetype.dsp,
builds/windows/visualc/freetype.vcproj,
builds/windows/visualc/index.html,
builds/windows/visualce/freetype.dsp,
builds/windows/visualce/freetype.vcproj,
builds/windows/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.6.3/2.6.4/, s/263/264/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 4.
* builds/unix/configure.raw (version_info): Set to 18:4:12.
* CMakeLists.txt (VERSION_PATCH): Set to 4.
* docs/CHANGES: Updated.
* src/smooth/ftgrays.c (TArea): Restore original definition as `int'.
(gray_render_line) [FT_LONG64]: Updated.
(gray_convert_glyph): 32-bit band bisection stack should be 32 bands.
(gray_convert_glyph_inner): Trace successes and failures.
Doing so allows us to link them to edges – some fonts like
`NotoSansGurmukhi-Regular' have such isolated points sitting exactly
on other outlines.
* src/autofit/aflatin.c (af_latin_hints_compute_segments): Don't
ignore one-point contours but handle them specially as one-point
segments.
(af_latin_hints_compute_edges): Append one-point segments to edges
if possible.
This patch restores original `TCoord' definition as `int' so that the
rendering pool is used more efficiently on LP64 platforms (unix).
* src/smooth/ftgrays.c (gray_TWorker, TCell, gray_TBand): Switch some
fields to `TCoord'.
(gray_find_cell, gray_render_scanline, gray_render_line, gray_hline,
gray_sweep, gray_convert_glyph): Updated.
* src/smooth/ftgrays.c (gray_convert_glyph): Do not use volatile
qualifier.
(gray_raster_render): Move span initializations from here.
(gray_sweep): ... to here and remove unused `target' argument.
* src/smooth/ftgrays.c (gray_init_cells): Remove function.
(gray_TWorker): Remove fields that become local variables.
(gray_raster_render): Move rendering buffer declaration from here.
(gray_convert_glyph): ... to here and update accordingly.
Removing the checks from `gray_hline' shaves 1% off rendering speed.
* src/smooth/ftgrays.c [STANDALONE_]: Duplicate `FT_MIN' and `FT_MAX'.
(gray_TWorker): No need to store `clip_box'.
(gray_hline): Remove unnecessary boundary checks.
(gray_convert_glyph): Move boundary checks from here.
(gray_raster_render): ... to here and consolidate.
* src/smooth/ftgrays.c [STANDALONE_]: Duplicate `FT_Outline_Get_CBox'.
(gray_compute_cbox): Remove this function.
(gray_convert_glyph): Update to use `FT_Outline_Get_CBox'.
Werner Lemberg