peregrine: Use msm8226-common repo

* Remove extra init scripts
* Use nested cm.dependencies
* Remove extra makefiles
* Add device specific WCNSS NV
* Add setup-makefiles.sh, extract-files.sh
This commit is contained in:
Ethan Chen 2014-08-13 16:27:35 -07:00
parent 1d625a9cff
commit 6fab759582
19 changed files with 126 additions and 792 deletions

26
Android.mk Normal file
View File

@ -0,0 +1,26 @@
#
# Copyright (C) 2014 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# WARNING: Everything listed here will be built on ALL platforms,
# including x86, the emulator, and the SDK. Modules must be uniquely
# named (liblights.tuna), and must build everywhere, or limit themselves
# to only building on ARM if they include assembly. Individual makefiles
# are responsible for having their own logic, for fine-grained control.
LOCAL_PATH := $(call my-dir)
ifeq ($(TARGET_DEVICE),peregrine)
include $(call all-makefiles-under,$(LOCAL_PATH))
endif

View File

@ -1,8 +0,0 @@
LOCAL_PATH := $(call my-dir)
include $(CLEAR_VARS)
ALL_PREBUILT += $(INSTALLED_KERNEL_TARGET)
# include the non-open-source counterpart to this file
-include vendor/motorola/peregrine/AndroidBoardVendor.mk

View File

@ -1,2 +1,17 @@
#
# Copyright (C) 2014 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
PRODUCT_MAKEFILES := \
$(LOCAL_DIR)/full_peregrine.mk

View File

@ -13,34 +13,23 @@
# See the License for the specific language governing permissions and
# limitations under the License.
#
# This file sets variables that control the way modules are built
# thorughout the system. It should not be used to conditionally
# disable makefiles (the proper mechanism to control what gets
# included in a build is to use PRODUCT_PACKAGES in a product
# definition file).
#
# inherit from common msm8226-common
-include device/motorola/msm8226-common/BoardConfigCommon.mk
LOCAL_PATH := device/motorola/peregrine
# Kernel
BOARD_CUSTOM_BOOTIMG_MK := $(LOCAL_PATH)/mkbootimg.mk
TARGET_KERNEL_CONFIG := msm8926_mmi_defconfig
# Partitions
BOARD_BOOTIMAGE_PARTITION_SIZE := 10485760
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 10485760
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1023410176
BOARD_USERDATAIMAGE_PARTITION_SIZE := 5930614784
# Recovery
TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/rootdir/etc/fstab.qcom
# inherit from the proprietary version
-include vendor/motorola/peregrine/BoardConfigVendor.mk
LOCAL_PATH := device/motorola/perergine
BOARD_CUSTOM_BOOTIMG_MK := device/motorola/peregrine/mkbootimg.mk
BOARD_HAS_NO_MISC_PARTITION := true
TARGET_UNIFIED_DEVICE := true
TARGET_INIT_VENDOR_LIB := libinit_msm
BOARD_USERDATAIMAGE_PARTITION_SIZE := 8589934592
TARGET_RECOVERY_FSTAB := device/motorola/peregrine/rootdir/etc/fstab.qcom
#TWRP
DEVICE_RESOLUTION := 720x1280
TW_IGNORE_MAJOR_AXIS_0 := true
TW_EXTERNAL_STORAGE_PATH := "/external_sd"
TW_EXTERNAL_STORAGE_MOUNT_POINT := "external_sd"
#TW_CUSTOM_POWER_BUTTON := 107

View File

@ -1,30 +1,6 @@
[
{
"repository": "android_device_qcom_common",
"target_path": "device/qcom/common"
},
{
"repository": "android_device_motorola_qcom-common",
"target_path": "device/motorola/qcom-common"
},
{
"repository": "android_device_motorola_msm8226-common",
"target_path": "device/motorola/msm8226-common"
},
{
"repository": "android_kernel_motorola_msm8226",
"target_path": "kernel/motorola/msm8226"
},
{
"repository": "android_hardware_qcom_fm",
"target_path": "hardware/qcom/fm"
},
{
"repository": "android_hardware_qcom_display-caf-new",
"target_path": "hardware/qcom/display-caf-new"
},
{
"repository": "android_hardware_qcom_media-caf-new",
"target_path": "hardware/qcom/media-caf-new"
}
]

10
cm.mk
View File

@ -1,13 +1,7 @@
$(call inherit-product, device/motorola/peregrine/full_peregrine.mk)
# Inherit some common CM stuff.
$(call inherit-product, vendor/cm/config/common_full_phone.mk)
# Boot animation
TARGET_SCREEN_WIDTH := 720
TARGET_SCREEN_HEIGHT := 1280
# Inherit device configuration
$(call inherit-product, device/motorola/peregrine/full_peregrine.mk)
## Device identifier. This must come after all inclusions
PRODUCT_RELEASE_NAME := peregrine
PRODUCT_NAME := cm_peregrine

View File

@ -1,2 +0,0 @@
# proprietary file list
# bin/filename

32
device.mk Normal file
View File

@ -0,0 +1,32 @@
#
# Copyright (C) 2014 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# call the proprietary setup
$(call inherit-product-if-exists, vendor/motorola/peregrine/peregrine-vendor.mk)
# Overlay
DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay
# Ramdisk
PRODUCT_PACKAGES += \
fstab.qcom
# Wifi
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/wifi/WCNSS_qcom_wlan_nv.bin:system/etc/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin
# Inherit from msm8226-common
$(call inherit-product, device/motorola/msm8226-common/msm8226.mk)

View File

@ -1,27 +0,0 @@
$(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)
$(call inherit-product-if-exists, vendor/motorola/peregrine/peregrine-vendor.mk)
LOCAL_PATH := device/motorola/peregrine
# peregrine specific overlay
DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay
# Ramdisk
PRODUCT_PACKAGES += \
init.qcom.rc \
fstab.qcom
# TWRP
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/rootdir/etc/twrp.fstab:recovery/root/etc/twrp.fstab
PRODUCT_LOCALES := en_US
PRODUCT_LOCALES += xhdpi
PRODUCT_AAPT_CONFIG := normal hdpi xhdpi
PRODUCT_AAPT_PREF_CONFIG := xhdpi
$(call inherit-product, frameworks/native/build/phone-xhdpi-1024-dalvik-heap.mk)
$(call inherit-product, device/motorola/msm8226-common/msm8226.mk)
$(call inherit-product, device/motorola/msm8226-common/keylayout/keylayout.mk)

View File

@ -1,10 +1,7 @@
#!/bin/bash
#!/bin/sh
set -e
export VENDOR=motorola
export DEVICE=peregrine
# Comment these out if there is no common device tree for this device
export COMMON_DEVICE=msm8226-common
export BOARD_VENDOR=motorola-qcom
export TARGET_BOARD_PLATFORM=msm8226
../$COMMON_DEVICE/extract-files.sh $@
./../../$VENDOR/msm8226-common/extract-files.sh $@

View File

@ -1,5 +1,5 @@
#
# Copyright (C) 2013 The CyanogenMod Project
# Copyright (C) 2014 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@ -14,21 +14,13 @@
# limitations under the License.
#
#
# This file is the build configuration for a full Android
# build for peregrine hardware. This cleanly combines a set of
# device-specific aspects (drivers) with a device-agnostic
# product configuration (apps). Except for a few implementation
# details, it only fundamentally contains two inherit-product
# lines, full and peregrine, hence its name.
#
# Inherit from those products. Most specific first.
$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base_telephony.mk)
# Inherit from peregrine device
$(call inherit-product, device/motorola/peregrine/device_peregrine.mk)
## Device identifier. This must come after all inclusions
# Inherit from peregrine device
$(call inherit-product, device/motorola/peregrine/device.mk)
# Device identifier. This must come after all inclusions
PRODUCT_DEVICE := peregrine
PRODUCT_NAME := full_peregrine
PRODUCT_BRAND := motorola

4
proprietary-files.txt Normal file
View File

@ -0,0 +1,4 @@
# proprietary files for peregrine
# Sensors
lib/hw/sensors.msm8226.so

View File

@ -1,5 +1,4 @@
LOCAL_PATH:= $(call my-dir)
include $(CLEAR_VARS)
include $(CLEAR_VARS)
LOCAL_MODULE := fstab.qcom
@ -8,11 +7,3 @@ LOCAL_MODULE_CLASS := ETC
LOCAL_SRC_FILES := etc/fstab.qcom
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
include $(BUILD_PREBUILT)
include $(CLEAR_VARS)
LOCAL_MODULE := init.qcom.rc
LOCAL_MODULE_TAGS := optional eng
LOCAL_MODULE_CLASS := ETC
LOCAL_SRC_FILES := etc/init.qcom.rc
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
include $(BUILD_PREBUILT)

View File

@ -11,7 +11,7 @@
/dev/block/platform/msm_sdcc.1/by-name/boot /boot emmc defaults recoveryonly
/dev/block/platform/msm_sdcc.1/by-name/recovery /recovery emmc defaults recoveryonly
/dev/block/mmcblk1p1 /external_sd auto default recoveryonly
/devices/msm_sdcc.2/mmc_host auto vfat defaults voldmanaged=sdcard1:auto,migrate=target,noemulatedsd
/dev/block/mmcblk1p1 /external_sd auto default recoveryonly
/devices/msm_sdcc.2/mmc_host auto vfat defaults voldmanaged=sdcard1:auto,migrate=target,noemulatedsd
/devices/platform/msm_hsusb_host auto auto defaults voldmanaged=usbdisk:auto
/dev/block/zram0 none swap defaults zramsize=134217728

View File

@ -1,640 +0,0 @@
# Copyright (c) 2009-2012,2014 The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
import init.qcom.usb.rc
# import init.target.rc
on early-init
write /sys/block/mmcblk0/queue/scheduler noop
on init
loglevel 8
# Set permissions for persist partition
mkdir /persist 0771 system system
# See storage config details at http://source.android.com/tech/storage/
mkdir /mnt/shell/emulated 0700 shell shell
mkdir /storage/emulated 0555 root root
#External storage directories
mkdir /mnt/media_rw/sdcard1 0700 media_rw media_rw
mkdir /storage/sdcard1 0700 root root
mkdir /storage/emulated/legacy 0555 root root
mkdir /mnt/media_rw/usbdisk 0700 media_rw media_rw
mkdir /storage/usbdisk 0700 root root
export EXTERNAL_STORAGE /storage/emulated/legacy
export EMULATED_STORAGE_SOURCE /mnt/shell/emulated
export EMULATED_STORAGE_TARGET /storage/emulated
export SECONDARY_STORAGE /storage/sdcard1
# Support legacy paths
symlink /storage/emulated/legacy /sdcard
symlink /storage/emulated/legacy /mnt/sdcard
symlink /storage/emulated/legacy /storage/sdcard0
symlink /storage/usbdisk /usbdisk
symlink /storage/usbdisk /mnt/usbdisk
on fs
setprop ro.crypto.fuse_sdcard true
on early-boot
# set RLIMIT_MEMLOCK to 64MB
setrlimit 8 67108864 67108864
# Allow subsystem (modem etc) debugging
write /sys/module/subsystem_restart/parameters/enable_debug ${persist.sys.ssr.enable_debug}
exec /system/bin/sh /init.qcom.early_boot.sh ${ro.board.platform}
exec /system/bin/sh /init.qcom.syspart_fixup.sh ${ro.board.platform} ${ro.serialno}
on boot
chown bluetooth bluetooth /sys/module/bluetooth_power/parameters/power
chown bluetooth bluetooth /sys/class/rfkill/rfkill0/type
chown bluetooth bluetooth /sys/class/rfkill/rfkill0/state
chown bluetooth bluetooth /proc/bluetooth/sleep/proto
chown bluetooth bluetooth /sys/module/hci_uart/parameters/ath_lpm
chown bluetooth bluetooth /sys/module/hci_uart/parameters/ath_btwrite
chown system system /sys/module/sco/parameters/disable_esco
chown bluetooth bluetooth /sys/module/hci_smd/parameters/hcismd_set
chmod 0660 /sys/module/bluetooth_power/parameters/power
chmod 0660 /sys/module/hci_smd/parameters/hcismd_set
chmod 0660 /sys/class/rfkill/rfkill0/state
chmod 0660 /proc/bluetooth/sleep/proto
chown bluetooth bluetooth /dev/ttyHS0
chmod 0660 /sys/module/hci_uart/parameters/ath_lpm
chmod 0660 /sys/module/hci_uart/parameters/ath_btwrite
chmod 0660 /dev/ttyHS0
chown bluetooth bluetooth /sys/devices/platform/msm_serial_hs.0/clock
chmod 0660 /sys/devices/platform/msm_serial_hs.0/clock
chmod 0660 /dev/ttyHS2
chown bluetooth bluetooth /dev/ttyHS2
#Create QMUX deamon socket area
mkdir /dev/socket/qmux_radio 0770 radio radio
chmod 2770 /dev/socket/qmux_radio
mkdir /dev/socket/qmux_audio 0770 media audio
chmod 2770 /dev/socket/qmux_audio
mkdir /dev/socket/qmux_bluetooth 0770 bluetooth bluetooth
chmod 2770 /dev/socket/qmux_bluetooth
mkdir /dev/socket/qmux_gps 0770 gps gps
chmod 2770 /dev/socket/qmux_gps
# Prevents permission denied error for telephony
chmod 0644 /proc/cmdline
setprop wifi.interface wlan0
# Define TCP buffer sizes for various networks
# ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax,
setprop net.tcp.buffersize.wifi 524288,2097152,4194304,262144,524288,1048576
setprop ro.telephony.call_ring.multiple false
#Remove SUID bit for iproute2 ip tool
chmod 0755 /system/bin/ip
chmod 0444 /sys/devices/platform/msm_hsusb/gadget/usb_state
#For bridgemgr daemon to inform the USB driver of the correct transport
chown radio radio /sys/class/android_usb/f_rmnet_smd_sdio/transport
# For setting tcp delayed ack
chown system system /sys/kernel/ipv4/tcp_delack_seg
chown system system /sys/kernel/ipv4/tcp_use_userconfig
# Define TCP delayed ack settings for WiFi & LTE
setprop net.tcp.delack.default 1
setprop net.tcp.delack.wifi 20
setprop net.tcp.delack.lte 8
setprop net.tcp.usercfg.default 0
setprop net.tcp.usercfg.wifi 1
setprop net.tcp.usercfg.lte 1
#To allow interfaces to get v6 address when tethering is enabled
write /proc/sys/net/ipv6/conf/rmnet0/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet1/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet2/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet3/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet4/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet5/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet6/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet7/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra 2
write /proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra 2
# To prevent out of order acknowledgements from making
# connection tracking to treat them as not belonging to
# the connection they belong to.
# Otherwise, a weird issue happens in which some long
# connections on high-throughput links get dropped when
# an ack packet comes out of order
write /proc/sys/net/netfilter/nf_conntrack_tcp_be_liberal 1
# NFC local data and nfcee xml storage
mkdir /data/nfc 0770 nfc nfc
mkdir /data/nfc/param 0770 nfc nfc
# Flash storage isn't a good entropy source, and only causes locking
# overhead in the kernel. Turn it off.
write /sys/block/mmcblk0/queue/add_random 0
setprop ro.hw.device ${ro.boot.device}
setprop ro.hw.hwrev ${ro.boot.hwrev}
setprop ro.hw.radio ${ro.boot.radio}
# activate zram
swapon_all fstab.qcom
write /proc/sys/vm/page-cluster
# msm specific files that need to be created on /data
on post-fs-data
# we will remap this as /mnt/sdcard with the sdcard fuse tool
mkdir /data/media 0770 media_rw media_rw
chown media_rw media_rw /data/media
mkdir /data/misc/bluetooth 0770 bluetooth bluetooth
# Create the directories used by the Wireless subsystem
mkdir /data/misc/wifi 0770 wifi wifi
mkdir /data/misc/wifi/sockets 0770 wifi wifi
mkdir /data/misc/wifi/wpa_supplicant 0770 wifi wifi
mkdir /data/misc/dhcp 0770 dhcp dhcp
chown dhcp dhcp /data/misc/dhcp
# Create directory used by audio subsystem
mkdir /data/misc/audio 0770 audio audio
# Create directory used by the DASH client
mkdir /data/misc/dash 0770 media audio
# Mounting of persist is moved to 'on emmc-fs' and 'on fs' sections
# We chown/chmod /persist again so because mount is run as root + defaults
chown system system /persist
chmod 0771 /persist
chmod 0664 /sys/devices/platform/msm_sdcc.1/polling
chmod 0664 /sys/devices/platform/msm_sdcc.2/polling
chmod 0664 /sys/devices/platform/msm_sdcc.3/polling
chmod 0664 /sys/devices/platform/msm_sdcc.4/polling
# Chown polling nodes as needed from UI running on system server
chown system system /sys/devices/platform/msm_sdcc.1/polling
chown system system /sys/devices/platform/msm_sdcc.2/polling
chown system system /sys/devices/platform/msm_sdcc.3/polling
chown system system /sys/devices/platform/msm_sdcc.4/polling
#Create the symlink to qcn wpa_supplicant folder for ar6000 wpa_supplicant
mkdir /data/system 0775 system system
#symlink /data/misc/wifi/wpa_supplicant /data/system/wpa_supplicant
#Create directories for Location services
mkdir /data/misc/location 0770 gps gps
mkdir /data/misc/location/mq 0770 gps gps
mkdir /data/misc/location/xtwifi 0770 gps gps
mkdir /data/misc/location/gpsone_d 0770 system gps
mkdir /data/misc/location/quipc 0770 gps system
mkdir /data/misc/location/gsiff 0770 gps gps
#Create directory from IMS services
mkdir /data/shared 0755
chown system system /data/shared
#Create directory for FOTA
mkdir /data/fota 0771
chown system system /data/fota
#Create directory for hostapd
mkdir /data/hostapd 0770 system wifi
# Create /data/time folder for time-services
mkdir /data/time/ 0700 system system
mkdir /data/audio/ 0770 media audio
# Enable the setgid bit on the directory
chmod 2770 /data/audio
setprop vold.post_fs_data_done 1
#Create a folder for SRS to be able to create a usercfg file
mkdir /data/data/media 0770 media media
on property:init.svc.surfaceflinger=stopped
stop ppd
stop hdmid
on property:init.svc.wpa_supplicant=stopped
stop dhcpcd
on property:bluetooth.isEnabled=true
start btwlancoex
write /sys/class/bluetooth/hci0/idle_timeout 7000
service qcom-c_core-sh /system/bin/sh /init.qcom.class_core.sh
class core
user root
oneshot
service qcom-c_main-sh /system/bin/sh /init.class_main.sh
class main
user root
oneshot
service ril-qmi /system/bin/sh /init.qcom.ril.sh
class main
user root
oneshot
on property:vold.decrypt=trigger_restart_framework
start qcom-c_main-sh
start config_bluetooth
on property:persist.env.fastdorm.enabled=true
setprop persist.radio.data_no_toggle 1
service irsc_util /system/bin/logwrapper /system/bin/irsc_util "/etc/sec_config"
class main
user root
oneshot
service rmt_storage /system/bin/rmt_storage
class core
user root
disabled
on property:ro.boot.emmc=true
start rmt_storage
service rfs_access /system/bin/rfs_access
class core
user system
group system net_raw
on property:ro.boot.emmc=true
start rfs_access
service config_bluetooth /system/bin/sh /system/etc/init.qcom.bt.sh
class core
user root
oneshot
service hciattach /system/bin/sh /system/etc/init.qcom.bt.sh
class late_start
user bluetooth
group bluetooth net_bt_admin
disabled
oneshot
on property:bluetooth.hciattach=true
start hciattach
on property:bluetooth.hciattach=false
setprop bluetooth.status off
service bridgemgrd /system/bin/bridgemgrd
class late_start
user radio
group radio qcom_diag
disabled
service port-bridge /system/bin/port-bridge /dev/smd0 /dev/ttyGS0
class late_start
user system
group system inet
disabled
service qmiproxy /system/bin/qmiproxy
class main
user radio
group radio qcom_diag
disabled
# QMUX must be in multiple groups to support external process connections
service qmuxd /system/bin/qmuxd
class main
user radio
group radio audio bluetooth gps qcom_diag
disabled
service netmgrd /system/bin/netmgrd
class main
disabled
on property:ro.use_data_netmgrd=false
# netmgr not supported on specific target
stop netmgrd
# Adjust socket buffer to enlarge TCP receive window for high bandwidth
# but only if ro.data.large_tcp_window_size property is set.
on property:ro.data.large_tcp_window_size=true
write /proc/sys/net/ipv4/tcp_adv_win_scale 2
service btwlancoex /system/bin/sh /system/etc/init.qcom.coex.sh
class late_start
user bluetooth
group bluetooth net_bt_admin inet net_admin net_raw
disabled
oneshot
service p2p_supplicant /system/bin/wpa_supplicant \
-ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \
-I/system/etc/wifi/p2p_supplicant_overlay.conf -N \
-iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \
-I/system/etc/wifi/wpa_supplicant_overlay.conf \
-O/data/misc/wifi/sockets -puse_p2p_group_interface=1 \
-e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0
# we will start as root and wpa_supplicant will switch to user wifi
# after setting up the capabilities required for WEXT
# user wifi
# group wifi inet keystore
class main
socket wpa_wlan0 dgram 660 wifi wifi
disabled
oneshot
service wpa_supplicant /system/bin/wpa_supplicant \
-iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \
-I/system/etc/wifi/wpa_supplicant_overlay.conf \
-O/data/misc/wifi/sockets \
-e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0
# we will start as root and wpa_supplicant will switch to user wifi
# after setting up the capabilities required for WEXT
# user wifi
# group wifi inet keystore
class main
socket wpa_wlan0 dgram 660 wifi wifi
disabled
oneshot
service dhcpcd_wlan0 /system/bin/dhcpcd -ABKLG
class late_start
disabled
oneshot
service dhcpcd_p2p /system/bin/dhcpcd -ABKLG
class late_start
disabled
oneshot
service iprenew_wlan0 /system/bin/dhcpcd -n
class late_start
disabled
oneshot
service iprenew_p2p /system/bin/dhcpcd -n
class late_start
disabled
oneshot
service ptt_socket_app /system/bin/ptt_socket_app -d
class main
user root
group root
oneshot
service ptt_ffbm /system/bin/ptt_socket_app -f -d
user root
group root
disabled
oneshot
service dhcpcd_bt-pan /system/bin/dhcpcd -BKLG
class late_start
disabled
oneshot
service iprenew_bt-pan /system/bin/dhcpcd -n
class late_start
disabled
oneshot
service dhcpcd_bnep0 /system/bin/dhcpcd -BKLG
disabled
oneshot
service dhcpcd_bnep1 /system/bin/dhcpcd -BKLG
disabled
oneshot
service dhcpcd_bnep2 /system/bin/dhcpcd -BKLG
disabled
oneshot
service dhcpcd_bnep3 /system/bin/dhcpcd -BKLG
disabled
oneshot
service dhcpcd_bnep4 /system/bin/dhcpcd -BKLG
disabled
oneshot
service gpsone_daemon /system/bin/gpsone_daemon
class late_start
user gps
group gps inet net_raw
disabled
service quipc_igsn /system/bin/quipc_igsn
class late_start
user gps
group inet gps qcom_diag
disabled
service quipc_main /system/bin/quipc_main
class late_start
user gps
group gps net_admin wifi inet qcom_diag
disabled
service location_mq /system/bin/location-mq
class late_start
user gps
group gps
disabled
service xtwifi_inet /system/bin/xtwifi-inet-agent
class late_start
user gps
group inet gps
disabled
service xtwifi_client /system/bin/xtwifi-client
class late_start
user gps
group net_admin wifi inet gps
disabled
service lowi-server /system/bin/lowi-server
class late_start
user gps
group gps net_admin wifi inet qcom_diag
disabled
service fm_dl /system/bin/sh /system/etc/init.qcom.fm.sh
class late_start
user root
group system fm_radio
disabled
oneshot
on property:crypto.driver.load=1
insmod /system/lib/modules/qce.ko
insmod /system/lib/modules/qcedev.ko
on property:crypto.driver.load=0
exec /system/bin/rmmod qcedev.ko
exec /system/bin/rmmod qce.ko
service qcom-sh /system/bin/sh /init.qcom.sh
class late_start
user root
oneshot
service qcom-post-boot /system/bin/sh /system/etc/init.qcom.post_boot.sh
class late_start
user root
disabled
oneshot
service wifi-crda /system/bin/sh /system/etc/init.crda.sh
class late_start
user root
disabled
oneshot
on property:sys.boot_completed=1
start qcom-post-boot
write /sys/block/mmcblk0/queue/scheduler row
service hostapd /system/bin/hostapd -dddd /data/hostapd/hostapd.conf
class late_start
user root
group root
oneshot
disabled
service ds_fmc_appd /system/bin/ds_fmc_appd -p "rmnet0" -D
class late_start
group radio wifi inet
disabled
oneshot
on property:persist.data.ds_fmc_app.mode=1
start ds_fmc_appd
on property:ro.data.large_tcp_window_size=true
# Adjust socket buffer to enlarge TCP receive window for high bandwidth (e.g. DO-RevB)
write /proc/sys/net/ipv4/tcp_adv_win_scale 2
service ril-daemon1 /system/bin/rild -c 1
class main
socket rild1 stream 660 root radio
socket rild-debug1 stream 660 radio system
user root
disabled
group radio cache inet misc audio sdcard_r sdcard_rw diag qcom_diag log
service ril-daemon2 /system/bin/rild -c 2
class main
socket rild2 stream 660 root radio
socket rild-debug2 stream 660 radio system
user root
disabled
group radio cache inet misc audio sdcard_r sdcard_rw diag qcom_diag log
service sdcard /system/bin/sdcard -u 1023 -g 1023 -l /data/media /mnt/shell/emulated
class late_start
service fuse_sdcard1 /system/bin/sdcard -u 1023 -g 1023 -w 1023 -d /mnt/media_rw/sdcard1 /storage/sdcard1
class late_start
disabled
service fuse_usbdisk /system/bin/sdcard -u 1023 -g 1023 -d /mnt/media_rw/usbdisk /storage/usbdisk
class late_start
disabled
# Binding fuse mount point to /storage/emulated/legacy
on property:init.svc.sdcard=running
wait /mnt/shell/emulated/0
mount none /mnt/shell/emulated/0 /storage/emulated/legacy bind
service charger /charger
class charger
service ssr_diag /system/bin/ssr_diag
class late_start
user system
group system
# SSR setting
on property:persist.sys.ssr.restart_level=*
exec /system/bin/sh /init.qcom.ssr.sh ${persist.sys.ssr.restart_level}
service hvdcp /system/bin/hvdcp
class core
user root
disabled
on property:persist.usb.hvdcp.detect=true
start hvdcp
on property:persist.usb.hvdcp.detect=false
stop hvdcp
# CM Performance Profiles
# Powersave
on property:sys.perf.profile=0
start mpdecision
write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor powersave
write /sys/class/devfreq/qcom,cpubw.55 powersave
# Balanced
on property:sys.perf.profile=1
start mpdecision
write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor interactive
write /sys/class/devfreq/qcom,cpubw.55 msm_cpufreq
# High performance
on property:sys.perf.profile=2
stop mpdecision
write /sys/devices/system/cpu/cpu0/online 1
write /sys/devices/system/cpu/cpu1/online 1
write /sys/devices/system/cpu/cpu2/online 1
write /sys/devices/system/cpu/cpu3/online 1
write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance
write /sys/class/devfreq/qcom,cpubw.65 performance

View File

@ -1,20 +0,0 @@
# mount point fstype device
/data f2fs /dev/block/platform/msm_sdcc.1/by-name/userdata flags=fsflags="inline_xattr";length=-16384
/cache ext4 /dev/block/platform/msm_sdcc.1/by-name/cache
/system ext4 /dev/block/platform/msm_sdcc.1/by-name/system
/boot emmc /dev/block/platform/msm_sdcc.1/by-name/boot
/recovery emmc /dev/block/platform/msm_sdcc.1/by-name/recovery
/pds emmc /dev/block/platform/msm_sdcc.1/by-name/pds flags=backup=1;display=PDS
/utags emmc /dev/block/platform/msm_sdcc.1/by-name/utags flags=backup=1;display=utags
/persist emmc /dev/block/platform/msm_sdcc.1/by-name/persist flags=backup=1;display=persist
# Some of those partitions (e.g. modem, fsg) are actually ext4, but shouldn't be mounted in normal circumstances.
/modem emmc /dev/block/platform/msm_sdcc.1/by-name/modem flags=backup=1;display=NON-HLOS
/modemst1 emmc /dev/block/mmcblk0p17 flags=backup=1;display=modemst1
/modemst2 emmc /dev/block/mmcblk0p18 flags=backup=1;display=modemst2
/fsg emmc /dev/block/mmcblk0p21 flags=backup=1;display=fsg
/fsc emmc /dev/block/mmcblk0p22 flags=backup=1;display=fsc
/sp emmc /dev/block/platform/msm_sdcc.1/by-name/sp flags=backup=1;display=sp
/cid emmc /dev/block/mmcblk0p25 flags=backup=1;display=cid
/external_sd auto /dev/block/mmcblk1p1 /dev/block/mmcblk1 flags=display="microSD card";storage;wipeingui;removable
/usb-otg auto /dev/block/sda1 /dev/block/sda flags=display="USB OTG";storage;wipeingui;removable

7
setup-makefiles.sh Executable file
View File

@ -0,0 +1,7 @@
#!/bin/sh
set -e
export DEVICE=peregrine
export VENDOR=motorola
./../../$VENDOR/msm8226-common/setup-makefiles.sh $@

View File

@ -1,7 +1,15 @@
#
# system.prop for peregrine
# Use reference RIL for initial bringup
rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
# radio
rild.libargs=-d /dev/smd0
persist.debug.wfd.enable=1
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
# usb
ro.usb.mtp=0x2e82
ro.usb.mtp_adb=0x2e76
ro.usb.ptp=0x2e83
ro.usb.ptp_adb=0x2e84
ro.usb.bpt=0x2e28
ro.usb.bpt_adb=0x2e29
ro.usb.bpteth=0x2e2a
ro.usb.bpteth_adb=0x2e2b

BIN
wifi/WCNSS_qcom_wlan_nv.bin Normal file

Binary file not shown.