free
/
freedomboneeee
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
freedomboneeee/install-freedombone.sh

2981 lines
151 KiB
Bash
Executable File
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#!/bin/bash
# Freedombone install script intended for use with Debian Jessie
#
# Note on dynamic dns
# ===================
#
# I'm not particularly trying to promote freedns.afraid.org
# as a service, it just happens to be a dynamic DNS system which
# provides free (as in beer) accounts, and I'm trying to make the
# process of setting up a working server as trivial as possible.
# Other dynamic DNS systems are available, and if you're using
# something different then comment out the section within
# argument_checks and the call to dynamic_dns_freedns.
#
# Prerequisites
# =============
#
# cd ~/
# wget http://freedombone.uk.to/debian-jessie-console-armhf-2014-08-13.tar.xz
#
# Verify it.
#
# sha256sum debian-jessie-console-armhf-2014-08-13.tar.xz
# fc225cfb3c2dfad92cccafa97e92c3cd3db9d94f4771af8da364ef59609f43de
#
# Uncompress it.
#
# tar xJf debian-jessie-console-armhf-2014-08-13.tar.xz
# cd debian-jessie-console-armhf-2014-08-13
#
# sudo apt-get install u-boot-tools dosfstools git-core kpartx wget parted
# sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb beaglebone
#
# When finished eject the micrtoSD then reinsert it
#
# sudo cp /media/$USER/BOOT/bbb-uEnv.txt /media/$USER/BOOT/uEnv.txt
# sync
#
# Eject microSD, insert into BBB, attach USB cable between BBB and laptop.
# On Ubuntu wait until you see the "connected" message.
#
# ssh-keygen -f "/home/$USER/.ssh/known_hosts" -R 192.168.7.2
# ssh debian@192.168.7.2 (password "temppwd")
# su (password "root")
# passwd
# adduser $MY_USERNAME
# sed -i '/iface eth0 inet dhcp/a\iface eth0 inet static' /etc/network/interfaces
# sed -i '/iface eth0 inet static/a\ dns-nameservers 213.73.91.35 85.214.20.141' /etc/network/interfaces
# sed -i "/iface eth0 inet static/a\ gateway $MY_ROUTER_IP" /etc/network/interfaces
# sed -i '/iface eth0 inet static/a\ netmask 255.255.255.0' /etc/network/interfaces
# sed -i "/iface eth0 inet static/a\ address $MY_BBB_STATIC_IP" /etc/network/interfaces
# sed -i '/iface usb0 inet static/,/ gateway 192.168.7.1/ s/^/#/' /etc/network/interfaces
# shutdown now
#
# Connect BBB to router
#
# scp install-freedombone.sh $MY_USERNAME@$MY_BBB_STATIC_IP:/home/$MY_USERNAME
# ssh $MY_USERNAME@$MY_BBB_STATIC_IP
# su
# ./install-freedombone.sh [DOMAIN_NAME] [MY_USERNAME]
DOMAIN_NAME=$1
MY_USERNAME=$2
FREEDNS_SUBDOMAIN_CODE=$3
SYSTEM_TYPE=$4
# Different system variants which may be specified within
# the SYSTEM_TYPE option
VARIANT_WRITER="writer"
VARIANT_CLOUD="cloud"
VARIANT_CHAT="chat"
VARIANT_MAILBOX="mailbox"
VARIANT_SOCIAL="social"
VARIANT_MEDIA="media"
SSH_PORT=2222
KERNEL_VERSION="v3.15.10-bone7"
USE_HWRNG="yes"
INSTALLED_WITHIN_DOCKER="no"
# If you want to run an encrypted mailing list specify its name here.
# There should be no spaces in the name
PRIVATE_MAILING_LIST=
# Domain name or freedns subdomain for mediagoblin installation
MEDIAGOBLIN_DOMAIN_NAME=
MEDIAGOBLIN_FREEDNS_SUBDOMAIN_CODE=
MEDIAGOBLIN_REPO=""
MEDIAGOBLIN_ADMIN_PASSWORD=
# Domain name or freedns subdomain for microblog installation
MICROBLOG_DOMAIN_NAME=
MICROBLOG_FREEDNS_SUBDOMAIN_CODE=
MICROBLOG_REPO="git://gitorious.org/social/mainline.git"
MICROBLOG_ADMIN_PASSWORD=
# Domain name or redmatrix installation
REDMATRIX_DOMAIN_NAME=
REDMATRIX_FREEDNS_SUBDOMAIN_CODE=
REDMATRIX_REPO="https://github.com/friendica/red.git"
REDMATRIX_ADDONS_REPO="https://github.com/friendica/red-addons.git"
REDMATRIX_ADMIN_PASSWORD=
# Domain name or freedns subdomain for Owncloud installation
OWNCLOUD_DOMAIN_NAME=
# Freedns dynamic dns code for owncloud
OWNCLOUD_FREEDNS_SUBDOMAIN_CODE=
OWNCLOUD_ARCHIVE="owncloud-7.0.2.tar.bz2"
OWNCLOUD_DOWNLOAD="https://download.owncloud.org/community/$OWNCLOUD_ARCHIVE"
OWNCLOUD_HASH="ea07124a1b9632aa5227240d655e4d84967fb6dd49e4a16d3207d6179d031a3a"
# Domain name or freedns subdomain for your wiki
WIKI_FREEDNS_SUBDOMAIN_CODE=
WIKI_DOMAIN_NAME=
WIKI_ARCHIVE="dokuwiki-stable.tgz"
WIKI_DOWNLOAD="http://download.dokuwiki.org/src/dokuwiki/$WIKI_ARCHIVE"
WIKI_HASH="a0e79986b87b2744421ce3c33b43a21f296deadd81b1789c25fa4bb095e8e470"
# see https://www.dokuwiki.org/template:mnml-blog
# https://andreashaerter.com/tmp/downloads/dokuwiki-template-mnml-blog/CHECKSUMS.asc
WIKI_MNML_BLOG_ADDON_ARCHIVE="mnml-blog.tar.gz"
WIKI_MNML_BLOG_ADDON="https://andreashaerter.com/downloads/dokuwiki-template-mnml-blog/latest"
WIKI_MNML_BLOG_ADDON_HASH="428c280d09ee14326fef5cd6f6772ecfcd532f7b6779cd992ff79a97381cf39f"
# see https://www.dokuwiki.org/plugin:blogtng
WIKI_BLOGTNG_ADDON_NAME="dokufreaks-plugin-blogtng-93a3fec"
WIKI_BLOGTNG_ADDON_ARCHIVE="$WIKI_BLOGTNG_ADDON_NAME.zip"
WIKI_BLOGTNG_ADDON="https://github.com/dokufreaks/plugin-blogtng/zipball/master"
WIKI_BLOGTNG_ADDON_HASH="212b3ad918fdc92b2d49ef5d36bc9e086eab27532931ba6b87e05f35fd402a27"
# see https://www.dokuwiki.org/plugin:sqlite
WIKI_SQLITE_ADDON_NAME="cosmocode-sqlite-7be4003"
WIKI_SQLITE_ADDON_ARCHIVE="$WIKI_SQLITE_ADDON_NAME.tar.gz"
WIKI_SQLITE_ADDON="https://github.com/cosmocode/sqlite/tarball/master"
WIKI_SQLITE_ADDON_HASH="930335e647c7e62f3068689c256ee169fad2426b64f8360685d391ecb5eeda0c"
GPG_KEYSERVER="hkp://keys.gnupg.net"
# optionally you can provide your exported GPG key pair here
# Note that the private key file will be deleted after use
# If these are unspecified then a new GPG key will be created
MY_GPG_PUBLIC_KEY=
MY_GPG_PRIVATE_KEY=
# If you have existing mail within a Maildir
# you can specify the directory here and the files
# will be imported
IMPORT_MAILDIR=
# The Debian package repository to use.
DEBIAN_REPO="ftp.de.debian.org"
DEBIAN_VERSION="jessie"
# Directory where source code is downloaded and compiled
INSTALL_DIR=$HOME/build
# device name for an attached usb drive
USB_DRIVE=/dev/sda1
# memory limit for php in MB
MAX_PHP_MEMORY=32
# default MariaDB password
MARIADB_PASSWORD=
#list of encryption protocols
SSL_PROTOCOLS="TLSv1 TLSv1.1 TLSv1.2"
# list of ciphers to use
SSL_CIPHERS="EDH+CAMELLIA:EDH+aRSA:EECDH+aRSA+AESGCM:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH:+CAMELLIA256:+AES256:+CAMELLIA128:+AES128:+SSLv3:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!DSS:!RC4:!SEED:!ECDSA:CAMELLIA256-SHA:AES256-SHA:CAMELLIA128-SHA:AES128-SHA"
export DEBIAN_FRONTEND=noninteractive
# File which keeps track of what has already been installed
COMPLETION_FILE=$HOME/freedombone-completed.txt
if [ ! -f $COMPLETION_FILE ]; then
touch $COMPLETION_FILE
fi
function show_help {
echo ''
echo './install-freedombone.sh [domain] [username] [subdomain code] [system type]'
echo ''
echo 'domain'
echo '------'
echo 'This is your domain name or freedns subdomain.'
echo ''
echo 'username'
echo '--------'
echo ''
echo 'This will be your username on the system. It should be all'
echo 'lower case and contain no spaces'
echo ''
echo 'subdomain code'
echo '--------------'
echo 'This is the freedns dynamic DNS code for your subdomain.'
echo "To find it from https://freedns.afraid.org select 'Dynamic DNS',"
echo "then 'quick cron example' and copy the code located between "
echo "'?' and '=='."
echo ''
echo 'system type'
echo '-----------'
echo 'This can either be blank if you wish to install the full system,'
echo "or for more specialised variants you can specify '$VARIANT_MAILBOX', '$VARIANT_CLOUD',"
echo "'$VARIANT_CHAT', '$VARIANT_SOCIAL', '$VARIANT_MEDIA' or '$VARIANT_WRITER'"
echo ''
}
function argument_checks {
if [ ! -d /home/$MY_USERNAME ]; then
echo "There is no user '$MY_USERNAME' on the system. Use 'adduser $MY_USERNAME' to create the user."
exit 1
fi
if [ ! $DOMAIN_NAME ]; then
show_help
exit 2
fi
if [ ! $MY_USERNAME ]; then
show_help
exit 3
fi
if [ ! $FREEDNS_SUBDOMAIN_CODE ]; then
show_help
exit 4
fi
if [ $SYSTEM_TYPE ]; then
if [[ $SYSTEM_TYPE != $VARIANT_WRITER && $SYSTEM_TYPE != $VARIANT_CLOUD && $SYSTEM_TYPE != $VARIANT_CHAT && $SYSTEM_TYPE != $VARIANT_MAILBOX && $SYSTEM_TYPE != $VARIANT_SOCIAL && $SYSTEM_TYPE != $VARIANT_MEDIA ]]; then
echo "'$SYSTEM_TYPE' is an unrecognised Freedombone variant."
exit 30
fi
fi
}
function change_login_message {
if grep -Fxq "change_login_message" $COMPLETION_FILE; then
return
fi
echo '' > /etc/motd
echo ".---. . . " >> /etc/motd
echo "| | | " >> /etc/motd
echo "|--- .--. .-. .-. .-.| .-. .--.--. |.-. .-. .--. .-. " >> /etc/motd
echo "| | (.-' (.-' ( | ( )| | | | )( )| | (.-' " >> /etc/motd
echo "' ' --' --' -' - -' ' ' -' -' -' ' - --'" >> /etc/motd
if [[ $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
echo ' . . . ' >> /etc/motd
echo ' |\ /| | o ' >> /etc/motd
echo " | \/ | .-. .-.| . .-. " >> /etc/motd
echo " | |(.-'( | | ( ) " >> /etc/motd
echo " ' ' --' -' --' - -' - " >> /etc/motd
fi
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" ]]; then
echo ' . . . . . ' >> /etc/motd
echo ' \ \ / / o _|_ ' >> /etc/motd
echo ' \ \ /.--.. | .-. .--.' >> /etc/motd
echo " \/ \/ | | | (.-' | " >> /etc/motd
echo " ' ' ' -' - -' --'' " >> /etc/motd
fi
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" ]]; then
echo ' .--.. . ' >> /etc/motd
echo ' : | | ' >> /etc/motd
echo ' | | .-. . . .-.| ' >> /etc/motd
echo ' : |( )| |( | ' >> /etc/motd
echo " --' - -' -- - -' -" >> /etc/motd
fi
if [[ $SYSTEM_TYPE == "$VARIANT_CHAT" ]]; then
echo ' .--.. . ' >> /etc/motd
echo ' : | _|_ ' >> /etc/motd
echo ' | |--. .-. | ' >> /etc/motd
echo ' : | |( ) | ' >> /etc/motd
echo " --'' - -' - -' " >> /etc/motd
fi
if [[ $SYSTEM_TYPE == "$VARIANT_SOCIAL" ]]; then
echo ' .-. . ' >> /etc/motd
echo ' ( ) o | ' >> /etc/motd
echo ' -. .-. .-. . .-. | ' >> /etc/motd
echo ' ( )( )( | ( ) | ' >> /etc/motd
echo " -' -' -'-' - -' - - " >> /etc/motd
fi
if [[ $SYSTEM_TYPE == "$VARIANT_MAILBOX" ]]; then
echo ' . . . . ' >> /etc/motd
echo ' |\ /| o | | ' >> /etc/motd
echo ' | \/ | .-. . | |.-. .-.-. ,- ' >> /etc/motd
echo ' | |( ) | | | )( ) : ' >> /etc/motd
echo ' ' ' -' --' - -' -' -'-' - ' >> /etc/motd
fi
echo '' >> /etc/motd
echo ' Freedom in the Cloud' >> /etc/motd
echo '' >> /etc/motd
echo 'change_login_message' >> $COMPLETION_FILE
}
function search_for_attached_usb_drive {
# If a USB drive is attached then search for email,
# gpg, ssh keys and emacs configuration
if grep -Fxq "search_for_attached_usb_drive" $COMPLETION_FILE; then
return
fi
if [ -b $USB_DRIVE ]; then
if [ ! -d /media/usb ]; then
echo 'Mounting USB drive'
mkdir /media/usb
mount $USB_DRIVE /media/usb
fi
if ! [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
if [ -d /media/usb/Maildir ]; then
echo 'Maildir found on USB drive'
IMPORT_MAILDIR=/media/usb/Maildir
fi
if [ -d /media/usb/.gnupg ]; then
echo 'Importing GPG keyring'
cp -r /media/usb/.gnupg /home/$MY_USERNAME
chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.gnupg
if [ -f /home/$MY_USERNAME/.gnupg/secring.gpg ]; then
shred -zu /media/usb/.gnupg/secring.gpg
shred -zu /media/usb/.gnupg/random_seed
shred -zu /media/usb/.gnupg/trustdb.gpg
rm -rf /media/usb/.gnupg
else
echo 'GPG files did not copy'
exit 7
fi
fi
if [ -f /media/usb/private_key.gpg ]; then
echo 'GPG private key found on USB drive'
MY_GPG_PRIVATE_KEY=/media/usb/private_key.gpg
fi
if [ -f /media/usb/public_key.gpg ]; then
echo 'GPG public key found on USB drive'
MY_GPG_PUBLIC_KEY=/media/usb/public_key.gpg
fi
fi
if [ -d /media/usb/.ssh ]; then
echo 'Importing ssh keys'
cp -r /media/usb/.ssh /home/$MY_USERNAME
chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.ssh
# for security delete the ssh keys from the usb drive
if [ -f /home/$MY_USERNAME/.ssh/id_rsa ]; then
shred -zu /media/usb/.ssh/id_rsa
shred -zu /media/usb/.ssh/id_rsa.pub
shred -zu /media/usb/.ssh/known_hosts
rm -rf /media/usb/.ssh
else
echo 'ssh files did not copy'
exit 8
fi
fi
if [ -f /media/usb/.emacs ]; then
echo 'Importing .emacs file'
cp -f /media/usb/.emacs /home/$MY_USERNAME/.emacs
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.emacs
fi
if [ -d /media/usb/.emacs.d ]; then
echo 'Importing .emacs.d directory'
cp -r /media/usb/.emacs.d /home/$MY_USERNAME
chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.emacs.d
fi
if [ -d /media/usb/personal ]; then
echo 'Importing personal directory'
cp -r /media/usb/personal /home/$MY_USERNAME
chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/personal
fi
else
if [ -d /media/usb ]; then
umount /media/usb
rm -rf /media/usb
fi
echo 'No USB drive attached'
fi
echo 'search_for_attached_usb_drive' >> $COMPLETION_FILE
}
function remove_proprietary_repos {
if grep -Fxq "remove_proprietary_repos" $COMPLETION_FILE; then
return
fi
sed -i 's/ non-free//g' /etc/apt/sources.list
echo 'remove_proprietary_repos' >> $COMPLETION_FILE
}
function change_debian_repos {
if grep -Fxq "change_debian_repos" $COMPLETION_FILE; then
return
fi
rm -rf /var/lib/apt/lists/*
apt-get clean
sed -i "s/ftp.us.debian.org/$DEBIAN_REPO/g" /etc/apt/sources.list
# ensure that there is a security repo
if ! grep -q "security" /etc/apt/sources.list; then
if grep -q "jessie" /etc/apt/sources.list; then
echo "deb http://security.debian.org/ jessie/updates main contrib" >> /etc/apt/sources.list
echo "#deb-src http://security.debian.org/ jessie/updates main contrib" >> /etc/apt/sources.list
else
if grep -q "wheezy" /etc/apt/sources.list; then
echo "deb http://security.debian.org/ wheezy/updates main contrib" >> /etc/apt/sources.list
echo "#deb-src http://security.debian.org/ wheezy/updates main contrib" >> /etc/apt/sources.list
fi
fi
fi
apt-get update
apt-get -y --force-yes install apt-transport-https
echo 'change_debian_repos' >> $COMPLETION_FILE
}
function initial_setup {
if grep -Fxq "initial_setup" $COMPLETION_FILE; then
return
fi
apt-get -y remove --purge apache*
apt-get -y dist-upgrade
apt-get -y install ca-certificates emacs24
echo 'initial_setup' >> $COMPLETION_FILE
}
function install_editor {
if grep -Fxq "install_editor" $COMPLETION_FILE; then
return
fi
update-alternatives --set editor /usr/bin/emacs24
echo 'install_editor' >> $COMPLETION_FILE
}
function enable_backports {
if grep -Fxq "enable_backports" $COMPLETION_FILE; then
return
fi
if ! grep -Fxq "deb http://$DEBIAN_REPO/debian jessie-backports main" /etc/apt/sources.list; then
echo "deb http://$DEBIAN_REPO/debian jessie-backports main" >> /etc/apt/sources.list
fi
echo 'enable_backports' >> $COMPLETION_FILE
}
function update_the_kernel {
if grep -Fxq "update_the_kernel" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
return
fi
cd /opt/scripts/tools
./update_kernel.sh --kernel $KERNEL_VERSION
echo 'update_the_kernel' >> $COMPLETION_FILE
}
function enable_zram {
if grep -Fxq "enable_zram" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
return
fi
if ! grep -q "options zram num_devices=1" /etc/modprobe.d/zram.conf; then
echo 'options zram num_devices=1' >> /etc/modprobe.d/zram.conf
fi
echo '#!/bin/bash' > /etc/init.d/zram
echo '### BEGIN INIT INFO' >> /etc/init.d/zram
echo '# Provides: zram' >> /etc/init.d/zram
echo '# Required-Start:' >> /etc/init.d/zram
echo '# Required-Stop:' >> /etc/init.d/zram
echo '# Default-Start: 2 3 4 5' >> /etc/init.d/zram
echo '# Default-Stop: 0 1 6' >> /etc/init.d/zram
echo '# Short-Description: Increased Performance In Linux With zRam (Virtual Swap Compressed in RAM)' >> /etc/init.d/zram
echo '# Description: Adapted from systemd scripts at https://github.com/mystilleef/FedoraZram' >> /etc/init.d/zram
echo '### END INIT INFO' >> /etc/init.d/zram
echo 'start() {' >> /etc/init.d/zram
echo ' # get the number of CPUs' >> /etc/init.d/zram
echo ' num_cpus=$(grep -c processor /proc/cpuinfo)' >> /etc/init.d/zram
echo ' # if something goes wrong, assume we have 1' >> /etc/init.d/zram
echo ' [ "$num_cpus" != 0 ] || num_cpus=1' >> /etc/init.d/zram
echo ' # set decremented number of CPUs' >> /etc/init.d/zram
echo ' decr_num_cpus=$((num_cpus - 1))' >> /etc/init.d/zram
echo ' # get the amount of memory in the machine' >> /etc/init.d/zram
echo ' mem_total_kb=$(grep MemTotal /proc/meminfo | grep -E --only-matching "[[:digit:]]+")' >> /etc/init.d/zram
echo ' mem_total=$((mem_total_kb * 1024))' >> /etc/init.d/zram
echo ' # load dependency modules' >> /etc/init.d/zram
echo ' modprobe zram num_devices=$num_cpus' >> /etc/init.d/zram
echo ' # initialize the devices' >> /etc/init.d/zram
echo ' for i in $(seq 0 $decr_num_cpus); do' >> /etc/init.d/zram
echo ' echo $((mem_total / num_cpus)) > /sys/block/zram$i/disksize' >> /etc/init.d/zram
echo ' done' >> /etc/init.d/zram
echo ' # Creating swap filesystems' >> /etc/init.d/zram
echo ' for i in $(seq 0 $decr_num_cpus); do' >> /etc/init.d/zram
echo ' mkswap /dev/zram$i' >> /etc/init.d/zram
echo ' done' >> /etc/init.d/zram
echo ' # Switch the swaps on' >> /etc/init.d/zram
echo ' for i in $(seq 0 $decr_num_cpus); do' >> /etc/init.d/zram
echo ' swapon -p 100 /dev/zram$i' >> /etc/init.d/zram
echo ' done' >> /etc/init.d/zram
echo '}' >> /etc/init.d/zram
echo 'stop() {' >> /etc/init.d/zram
echo ' # get the number of CPUs' >> /etc/init.d/zram
echo ' num_cpus=$(grep -c processor /proc/cpuinfo)' >> /etc/init.d/zram
echo ' # set decremented number of CPUs' >> /etc/init.d/zram
echo ' decr_num_cpus=$((num_cpus - 1))' >> /etc/init.d/zram
echo ' # Switching off swap' >> /etc/init.d/zram
echo ' for i in $(seq 0 $decr_num_cpus); do' >> /etc/init.d/zram
echo ' if [ "$(grep /dev/zram$i /proc/swaps)" != "" ]; then' >> /etc/init.d/zram
echo ' swapoff /dev/zram$i' >> /etc/init.d/zram
echo ' sleep 1' >> /etc/init.d/zram
echo ' fi' >> /etc/init.d/zram
echo ' done' >> /etc/init.d/zram
echo ' sleep 1' >> /etc/init.d/zram
echo ' rmmod zram' >> /etc/init.d/zram
echo '}' >> /etc/init.d/zram
echo 'case "$1" in' >> /etc/init.d/zram
echo ' start)' >> /etc/init.d/zram
echo ' start' >> /etc/init.d/zram
echo ' ;;' >> /etc/init.d/zram
echo ' stop)' >> /etc/init.d/zram
echo ' stop' >> /etc/init.d/zram
echo ' ;;' >> /etc/init.d/zram
echo ' restart)' >> /etc/init.d/zram
echo ' stop' >> /etc/init.d/zram
echo ' sleep 3' >> /etc/init.d/zram
echo ' start' >> /etc/init.d/zram
echo ' ;;' >> /etc/init.d/zram
echo ' *)' >> /etc/init.d/zram
echo ' echo "Usage: $0 {start|stop|restart}"' >> /etc/init.d/zram
echo ' RETVAL=1' >> /etc/init.d/zram
echo 'esac' >> /etc/init.d/zram
echo 'exit $RETVAL' >> /etc/init.d/zram
chmod +x /etc/init.d/zram
update-rc.d zram defaults
echo 'enable_zram' >> $COMPLETION_FILE
}
function random_number_generator {
if grep -Fxq "random_number_generator" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# it is assumed that docker uses the random number
# generator of the host system
return
fi
if [[ $USE_HWRNG == "yes" ]]; then
apt-get -y --force-yes install rng-tools
sed -i 's|#HRNGDEVICE=/dev/hwrng|HRNGDEVICE=/dev/hwrng|g' /etc/default/rng-tools
else
apt-get -y --force-yes install haveged
fi
echo 'random_number_generator' >> $COMPLETION_FILE
}
function configure_ssh {
if grep -Fxq "configure_ssh" $COMPLETION_FILE; then
return
fi
sed -i "s/Port 22/Port $SSH_PORT/g" /etc/ssh/sshd_config
sed -i 's/PermitRootLogin without-password/PermitRootLogin no/g' /etc/ssh/sshd_config
sed -i 's/X11Forwarding yes/X11Forwarding no/g' /etc/ssh/sshd_config
sed -i 's/ServerKeyBits 1024/ServerKeyBits 4096/g' /etc/ssh/sshd_config
sed -i 's/TCPKeepAlive yes/TCPKeepAlive no/g' /etc/ssh/sshd_config
sed -i 's|HostKey /etc/ssh/ssh_host_dsa_key|#HostKey /etc/ssh/ssh_host_dsa_key|g' /etc/ssh/sshd_config
sed -i 's|HostKey /etc/ssh/ssh_host_ecdsa_key|#HostKey /etc/ssh/ssh_host_ecdsa_key|g' /etc/ssh/sshd_config
echo 'ClientAliveInterval 60' >> /etc/ssh/sshd_config
echo 'ClientAliveCountMax 3' >> /etc/ssh/sshd_config
echo 'Ciphers aes256-ctr,aes128-ctr' >> /etc/ssh/sshd_config
echo 'MACs hmac-sha2-512,hmac-sha2-256,hmac-ripemd160
KexAlgorithms diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha1' >> /etc/ssh/sshd_config
apt-get -y --force-yes install fail2ban
echo 'configure_ssh' >> $COMPLETION_FILE
# Don't reboot if installing within docker
# random numbers will come from the host system
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
return
fi
echo ''
echo ''
echo ' *** Rebooting to initialise ssh settings and random number generator ***'
echo ''
echo " *** Reconnect via ssh on port $SSH_PORT, then run this script again ***"
echo ''
reboot
}
function regenerate_ssh_keys {
if grep -Fxq "regenerate_ssh_keys" $COMPLETION_FILE; then
return
fi
rm -f /etc/ssh/ssh_host_*
dpkg-reconfigure openssh-server
service ssh restart
echo 'regenerate_ssh_keys' >> $COMPLETION_FILE
}
function configure_dns {
if grep -Fxq "configure_dns" $COMPLETION_FILE; then
return
fi
echo 'domain localdomain' > /etc/resolv.conf
echo 'search localdomain' >> /etc/resolv.conf
echo 'nameserver 213.73.91.35' >> /etc/resolv.conf
echo 'nameserver 85.214.20.141' >> /etc/resolv.conf
echo 'configure_dns' >> $COMPLETION_FILE
}
function set_your_domain_name {
if grep -Fxq "set_your_domain_name" $COMPLETION_FILE; then
return
fi
echo "$DOMAIN_NAME" > /etc/hostname
hostname $DOMAIN_NAME
sed -i "s/127.0.1.1 arm/127.0.1.1 $DOMAIN_NAME/g" /etc/hosts
echo "127.0.1.1 $DOMAIN_NAME" >> /etc/hosts
echo 'set_your_domain_name' >> $COMPLETION_FILE
}
function time_synchronisation {
if grep -Fxq "time_synchronisation" $COMPLETION_FILE; then
return
fi
apt-get -y --force-yes install tlsdate
apt-get -y remove ntpdate
echo '#!/bin/bash' > /usr/bin/updatedate
echo 'TIMESOURCE=google.com' >> /usr/bin/updatedate
echo 'TIMESOURCE2=www.ptb.de' >> /usr/bin/updatedate
echo 'LOGFILE=/var/log/tlsdate.log' >> /usr/bin/updatedate
echo 'TIMEOUT=5' >> /usr/bin/updatedate
echo "EMAIL=$MY_USERNAME@$DOMAIN_NAME" >> /usr/bin/updatedate
echo '# File which contains the previous date as a number' >> /usr/bin/updatedate
echo 'BEFORE_DATE_FILE=/var/log/tlsdateprevious.txt' >> /usr/bin/updatedate
echo '# File which contains the previous date as a string' >> /usr/bin/updatedate
echo 'BEFORE_FULLDATE_FILE=/var/log/tlsdate.txt' >> /usr/bin/updatedate
echo 'DATE_BEFORE=$(date)' >> /usr/bin/updatedate
echo 'BEFORE=$(date -d "$Y-$M-$D" "+%s")' >> /usr/bin/updatedate
echo 'BACKWARDS_BETWEEN=0' >> /usr/bin/updatedate
echo '# If the date was previously set' >> /usr/bin/updatedate
echo 'if [[ -f "$BEFORE_DATE_FILE" ]]; then' >> /usr/bin/updatedate
echo ' BEFORE_FILE=$(cat $BEFORE_DATE_FILE)' >> /usr/bin/updatedate
echo ' BEFORE_FULLDATE=$(cat $BEFORE_FULLDATE_FILE)' >> /usr/bin/updatedate
echo ' # is the date going backwards?' >> /usr/bin/updatedate
echo ' if (( BEFORE_FILE > BEFORE )); then' >> /usr/bin/updatedate
echo ' echo -n "Date went backwards between tlsdate updates. " >> $LOGFILE' >> /usr/bin/updatedate
echo ' echo -n "$BEFORE_FILE > $BEFORE, " >> $LOGFILE' >> /usr/bin/updatedate
echo ' echo "$BEFORE_FULLDATE > $DATE_BEFORE" >> $LOGFILE' >> /usr/bin/updatedate
echo ' # Send a warning email' > /usr/bin/updatedate
echo ' echo $(tail $LOGFILE -n 2) | mail -s "tlsdate anomaly" $EMAIL' >> /usr/bin/updatedate
echo ' # Try another time source' >> /usr/bin/updatedate
echo ' TIMESOURCE=$TIMESOURCE2' >> /usr/bin/updatedate
echo ' # try running without any parameters' >> /usr/bin/updatedate
echo ' tlsdate >> $LOGFILE' >> /usr/bin/updatedate
echo ' BACKWARDS_BETWEEN=1' >> /usr/bin/updatedate
echo ' fi' >> /usr/bin/updatedate
echo 'fi' >> /usr/bin/updatedate
echo '# Set the date' >> /usr/bin/updatedate
echo '/usr/bin/timeout $TIMEOUT tlsdate -l -t -H $TIMESOURCE -p 443 >> $LOGFILE' >> /usr/bin/updatedate
echo 'DATE_AFTER=$(date)' >> /usr/bin/updatedate
echo 'AFTER=$(date -d "$Y-$M-$D" '+%s')' >> /usr/bin/updatedate
echo '# After setting the date did it go backwards?' >> /usr/bin/updatedate
echo 'if (( AFTER < BEFORE )); then' >> /usr/bin/updatedate
echo ' echo "Incorrect date: $DATE_BEFORE -> $DATE_AFTER" >> $LOGFILE' >> /usr/bin/updatedate
echo ' # Send a warning email' >> /usr/bin/updatedate
echo ' echo $(tail $LOGFILE -n 2) | mail -s "tlsdate anomaly" $EMAIL' >> /usr/bin/updatedate
echo ' # Try resetting the date from another time source' >> /usr/bin/updatedate
echo ' /usr/bin/timeout $TIMEOUT tlsdate -l -t -H $TIMESOURCE2 -p 443 >> $LOGFILE' >> /usr/bin/updatedate
echo ' DATE_AFTER=$(date)' >> /usr/bin/updatedate
echo ' AFTER=$(date -d "$Y-$M-$D" "+%s")' >> /usr/bin/updatedate
echo 'else' >> /usr/bin/updatedate
echo ' echo -n $TIMESOURCE >> $LOGFILE' >> /usr/bin/updatedate
echo ' if [[ -f "$BEFORE_DATE_FILE" ]]; then' >> /usr/bin/updatedate
echo ' echo -n " " >> $LOGFILE' >> /usr/bin/updatedate
echo ' echo -n $BEFORE_FILE >> $LOGFILE' >> /usr/bin/updatedate
echo ' fi' >> /usr/bin/updatedate
echo ' echo -n " " >> $LOGFILE' >> /usr/bin/updatedate
echo ' echo -n $BEFORE >> $LOGFILE' >> /usr/bin/updatedate
echo ' echo -n " " >> $LOGFILE' >> /usr/bin/updatedate
echo ' echo -n $AFTER >> $LOGFILE' >> /usr/bin/updatedate
echo ' echo -n " " >> $LOGFILE' >> /usr/bin/updatedate
echo ' echo $DATE_AFTER >> $LOGFILE' >> /usr/bin/updatedate
echo 'fi' >> /usr/bin/updatedate
echo '# Log the last date' >> /usr/bin/updatedate
echo 'if [ BACKWARDS_BETWEEN == 0 ]; then' >> /usr/bin/updatedate
echo ' echo "$AFTER" > $BEFORE_DATE_FILE' >> /usr/bin/updatedate
echo ' echo "$DATE_AFTER" > $BEFORE_FULLDATE_FILE' >> /usr/bin/updatedate
echo ' exit 0' >> /usr/bin/updatedate
echo 'else' >> /usr/bin/updatedate
echo ' exit 1' >> /usr/bin/updatedate
echo 'fi' >> /usr/bin/updatedate
chmod +x /usr/bin/updatedate
echo '*/15 * * * * root /usr/bin/updatedate' >> /etc/crontab
service cron restart
echo '#!/bin/bash' > /etc/init.d/tlsdate
echo '# /etc/init.d/tlsdate' >> /etc/init.d/tlsdate
echo '### BEGIN INIT INFO' >> /etc/init.d/tlsdate
echo '# Provides: tlsdate' >> /etc/init.d/tlsdate
echo '# Required-Start: $remote_fs $syslog' >> /etc/init.d/tlsdate
echo '# Required-Stop: $remote_fs $syslog' >> /etc/init.d/tlsdate
echo '# Default-Start: 2 3 4 5' >> /etc/init.d/tlsdate
echo '# Default-Stop: 0 1 6' >> /etc/init.d/tlsdate
echo '# Short-Description: Initially calls tlsdate with the timewarp option' >> /etc/init.d/tlsdate
echo '# Description: Initially calls tlsdate with the timewarp option' >> /etc/init.d/tlsdate
echo '### END INIT INFO' >> /etc/init.d/tlsdate
echo '# Author: Bob Mottram <bob@robotics.uk.to>' >> /etc/init.d/tlsdate
echo 'PATH="/usr/local/sbin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin"' >> /etc/init.d/tlsdate
echo 'LOGFILE="/var/log/tlsdate.log"' >> /etc/init.d/tlsdate
echo 'TLSDATECOMMAND="tlsdate --timewarp -l -H www.ptb.de -p 443 >> $LOGFILE"' >> /etc/init.d/tlsdate
echo '#Start-Stop here' >> /etc/init.d/tlsdate
echo 'case "$1" in' >> /etc/init.d/tlsdate
echo ' start)' >> /etc/init.d/tlsdate
echo ' echo "tlsdate started"' >> /etc/init.d/tlsdate
echo ' $TLSDATECOMMAND' >> /etc/init.d/tlsdate
echo ' ;;' >> /etc/init.d/tlsdate
echo ' stop)' >> /etc/init.d/tlsdate
echo ' echo "tlsdate stopped"' >> /etc/init.d/tlsdate
echo ' ;;' >> /etc/init.d/tlsdate
echo ' restart)' >> /etc/init.d/tlsdate
echo ' echo "tlsdate restarted"' >> /etc/init.d/tlsdate
echo ' $TLSDATECOMMAND' >> /etc/init.d/tlsdate
echo ' ;;' >> /etc/init.d/tlsdate
echo ' *)' >> /etc/init.d/tlsdate
echo ' echo "Usage: $0 {start|stop|restart}"' >> /etc/init.d/tlsdate
echo ' exit 1' >> /etc/init.d/tlsdate
echo ' ;;' >> /etc/init.d/tlsdate
echo 'esac' >> /etc/init.d/tlsdate
echo 'exit 0' >> /etc/init.d/tlsdate
chmod +x /etc/init.d/tlsdate
update-rc.d tlsdate defaults
echo 'time_synchronisation' >> $COMPLETION_FILE
}
function configure_firewall {
if grep -Fxq "configure_firewall" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -P INPUT ACCEPT
ip6tables -P INPUT ACCEPT
iptables -F
ip6tables -F
iptables -X
ip6tables -X
iptables -P INPUT DROP
ip6tables -P INPUT DROP
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -i eth0 -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
echo 'configure_firewall' >> $COMPLETION_FILE
}
function save_firewall_settings {
iptables-save > /etc/firewall.conf
ip6tables-save > /etc/firewall6.conf
printf '#!/bin/sh\n' > /etc/network/if-up.d/iptables
printf 'iptables-restore < /etc/firewall.conf\n' >> /etc/network/if-up.d/iptables
printf 'ip6tables-restore < /etc/firewall6.conf\n' >> /etc/network/if-up.d/iptables
chmod +x /etc/network/if-up.d/iptables
}
function configure_firewall_for_dns {
if grep -Fxq "configure_firewall_for_dns" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -A INPUT -i eth0 -p udp -m udp --dport 1024:65535 --sport 53 -j ACCEPT
save_firewall_settings
echo 'configure_firewall_for_dns' >> $COMPLETION_FILE
}
function configure_firewall_for_xmpp {
if [ ! -d /etc/prosody ]; then
return
fi
if grep -Fxq "configure_firewall_for_xmpp" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -A INPUT -i eth0 -p tcp --dport 5222:5223 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 5269 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 5280:5281 -j ACCEPT
save_firewall_settings
echo 'configure_firewall_for_xmpp' >> $COMPLETION_FILE
}
function configure_firewall_for_irc {
if [ ! -d /etc/ngircd ]; then
return
fi
if grep -Fxq "configure_firewall_for_irc" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -A INPUT -i eth0 -p tcp --dport 6697 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 9999 -j ACCEPT
save_firewall_settings
echo 'configure_firewall_for_irc' >> $COMPLETION_FILE
}
function configure_firewall_for_ftp {
if grep -Fxq "configure_firewall_for_ftp" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -I INPUT -i eth0 -p tcp --dport 1024:65535 --sport 20:21 -j ACCEPT
save_firewall_settings
echo 'configure_firewall_for_ftp' >> $COMPLETION_FILE
}
function configure_firewall_for_web_access {
if grep -Fxq "configure_firewall_for_web_access" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -A INPUT -i eth0 -p tcp --dport 32768:61000 --sport 80 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 32768:61000 --sport 443 -j ACCEPT
save_firewall_settings
echo 'configure_firewall_for_web_access' >> $COMPLETION_FILE
}
function configure_firewall_for_web_server {
if grep -Fxq "configure_firewall_for_web_server" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -A INPUT -i eth0 -p tcp --dport 80 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 443 -j ACCEPT
save_firewall_settings
echo 'configure_firewall_for_web_server' >> $COMPLETION_FILE
}
function configure_firewall_for_ssh {
if grep -Fxq "configure_firewall_for_ssh" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport $SSH_PORT -j ACCEPT
save_firewall_settings
echo 'configure_firewall_for_ssh' >> $COMPLETION_FILE
}
function configure_firewall_for_git {
if grep -Fxq "configure_firewall_for_git" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -A INPUT -i eth0 -p tcp --dport 9418 -j ACCEPT
save_firewall_settings
echo 'configure_firewall_for_git' >> $COMPLETION_FILE
}
function configure_firewall_for_email {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "configure_firewall_for_email" $COMPLETION_FILE; then
return
fi
if [[ $INSTALLED_WITHIN_DOCKER == "yes" ]]; then
# docker does its own firewalling
return
fi
iptables -A INPUT -i eth0 -p tcp --dport 25 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 587 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 465 -j ACCEPT
iptables -A INPUT -i eth0 -p tcp --dport 993 -j ACCEPT
save_firewall_settings
echo 'configure_firewall_for_email' >> $COMPLETION_FILE
}
function configure_internet_protocol {
if grep -Fxq "configure_internet_protocol" $COMPLETION_FILE; then
return
fi
sed -i "s/#net.ipv4.tcp_syncookies=1/net.ipv4.tcp_syncookies=1/g" /etc/sysctl.conf
sed -i "s/#net.ipv4.conf.all.accept_redirects = 0/net.ipv4.conf.all.accept_redirects = 0/g" /etc/sysctl.conf
sed -i "s/#net.ipv6.conf.all.accept_redirects = 0/net.ipv6.conf.all.accept_redirects = 0/g" /etc/sysctl.conf
sed -i "s/#net.ipv4.conf.all.send_redirects = 0/net.ipv4.conf.all.send_redirects = 0/g" /etc/sysctl.conf
sed -i "s/#net.ipv4.conf.all.accept_source_route = 0/net.ipv4.conf.all.accept_source_route = 0/g" /etc/sysctl.conf
sed -i "s/#net.ipv6.conf.all.accept_source_route = 0/net.ipv6.conf.all.accept_source_route = 0/g" /etc/sysctl.conf
sed -i "s/#net.ipv4.conf.default.rp_filter=1/net.ipv4.conf.default.rp_filter=1/g" /etc/sysctl.conf
sed -i "s/#net.ipv4.conf.all.rp_filter=1/net.ipv4.conf.all.rp_filter=1/g" /etc/sysctl.conf
sed -i "s/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=0/g" /etc/sysctl.conf
sed -i "s/#net.ipv6.conf.all.forwarding=1/net.ipv6.conf.all.forwarding=0/g" /etc/sysctl.conf
echo '# ignore pings' >> /etc/sysctl.conf
echo 'net.ipv4.icmp_echo_ignore_all = 1' >> /etc/sysctl.conf
echo 'net.ipv6.icmp_echo_ignore_all = 1' >> /etc/sysctl.conf
echo '# disable ipv6' >> /etc/sysctl.conf
echo 'net.ipv6.conf.all.disable_ipv6 = 1' >> /etc/sysctl.conf
echo 'net.ipv4.tcp_synack_retries = 2' >> /etc/sysctl.conf
echo 'net.ipv4.tcp_syn_retries = 1' >> /etc/sysctl.conf
echo '# keepalive' >> /etc/sysctl.conf
echo 'net.ipv4.tcp_keepalive_probes = 9' >> /etc/sysctl.conf
echo 'net.ipv4.tcp_keepalive_intvl = 75' >> /etc/sysctl.conf
echo 'net.ipv4.tcp_keepalive_time = 7200' >> /etc/sysctl.conf
echo 'configure_internet_protocol' >> $COMPLETION_FILE
}
function script_to_make_self_signed_certificates {
if grep -Fxq "script_to_make_self_signed_certificates" $COMPLETION_FILE; then
return
fi
echo '#!/bin/bash' > /usr/bin/makecert
echo 'HOSTNAME=$1' >> /usr/bin/makecert
echo 'COUNTRY_CODE="US"' >> /usr/bin/makecert
echo 'AREA="Free Speech Zone"' >> /usr/bin/makecert
echo 'LOCATION="Freedomville"' >> /usr/bin/makecert
echo 'ORGANISATION="Freedombone"' >> /usr/bin/makecert
echo 'UNIT="Freedombone Unit"' >> /usr/bin/makecert
echo 'if ! which openssl > /dev/null ;then' >> /usr/bin/makecert
echo ' echo "$0: openssl is not installed, exiting" 1>&2' >> /usr/bin/makecert
echo ' exit 1' >> /usr/bin/makecert
echo 'fi' >> /usr/bin/makecert
echo 'openssl req -x509 -nodes -days 3650 -sha256 -subj "/O=$ORGANISATION/OU=$UNIT/C=$COUNTRY_CODE/ST=$AREA/L=$LOCATION/CN=$HOSTNAME" -newkey rsa:4096 -keyout /etc/ssl/private/$HOSTNAME.key -out /etc/ssl/certs/$HOSTNAME.crt' >> /usr/bin/makecert
echo 'openssl dhparam -check -text -5 1024 -out /etc/ssl/certs/$HOSTNAME.dhparam' >> /usr/bin/makecert
echo 'chmod 400 /etc/ssl/private/$HOSTNAME.key' >> /usr/bin/makecert
echo 'chmod 640 /etc/ssl/certs/$HOSTNAME.crt' >> /usr/bin/makecert
echo 'chmod 640 /etc/ssl/certs/$HOSTNAME.dhparam' >> /usr/bin/makecert
echo 'if [ -f /etc/init.d/nginx ]; then' >> /usr/bin/makecert
echo ' /etc/init.d/nginx reload' >> /usr/bin/makecert
echo 'fi' >> /usr/bin/makecert
echo '# add the public certificate to a separate directory' >> /usr/bin/makecert
echo '# so that we can redistribute it easily' >> /usr/bin/makecert
echo 'if [ ! -d /etc/ssl/mycerts ]; then' >> /usr/bin/makecert
echo ' mkdir /etc/ssl/mycerts' >> /usr/bin/makecert
echo 'fi' >> /usr/bin/makecert
echo 'cp /etc/ssl/certs/$HOSTNAME.crt /etc/ssl/mycerts' >> /usr/bin/makecert
echo '# Create a bundle of your certificates' >> /usr/bin/makecert
echo 'cat /etc/ssl/mycerts/*.crt > /etc/ssl/freedombone-bundle.crt' >> /usr/bin/makecert
echo 'tar -czvf /etc/ssl/freedombone-certs.tar.gz /etc/ssl/mycerts/*.crt' >> /usr/bin/makecert
chmod +x /usr/bin/makecert
echo 'script_to_make_self_signed_certificates' >> $COMPLETION_FILE
}
function configure_email {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "configure_email" $COMPLETION_FILE; then
return
fi
apt-get -y remove postfix
apt-get -y --force-yes install exim4 sasl2-bin swaks libnet-ssleay-perl procmail
echo 'dc_eximconfig_configtype="internet"' > /etc/exim4/update-exim4.conf.conf
echo "dc_other_hostnames='$DOMAIN_NAME'" >> /etc/exim4/update-exim4.conf.conf
echo "dc_local_interfaces=''" >> /etc/exim4/update-exim4.conf.conf
echo "dc_readhost=''" >> /etc/exim4/update-exim4.conf.conf
echo "dc_relay_domains=''" >> /etc/exim4/update-exim4.conf.conf
echo "dc_minimaldns='false'" >> /etc/exim4/update-exim4.conf.conf
echo "dc_relay_nets='192.168.1.0/24'" >> /etc/exim4/update-exim4.conf.conf
echo "dc_smarthost=''" >> /etc/exim4/update-exim4.conf.conf
echo "CFILEMODE='644'" >> /etc/exim4/update-exim4.conf.conf
echo "dc_use_split_config='false'" >> /etc/exim4/update-exim4.conf.conf
echo "dc_hide_mailname=''" >> /etc/exim4/update-exim4.conf.conf
echo "dc_mailname_in_oh='true'" >> /etc/exim4/update-exim4.conf.conf
echo "dc_localdelivery='maildir_home'" >> /etc/exim4/update-exim4.conf.conf
update-exim4.conf
sed -i "s/START=no/START=yes/g" /etc/default/saslauthd
/etc/init.d/saslauthd start
# make a tls certificate for email
makecert exim
mv /etc/ssl/private/exim.key /etc/exim4
mv /etc/ssl/certs/exim.crt /etc/exim4
mv /etc/ssl/certs/exim.dhparam /etc/exim4
chown root:Debian-exim /etc/exim4/exim.key /etc/exim4/exim.crt /etc/exim4/exim.dhparam
chmod 640 /etc/exim4/exim.key /etc/exim4/exim.crt /etc/exim4/exim.dhparam
sed -i '/login_saslauthd_server/,/.endif/ s/# *//' /etc/exim4/exim4.conf.template
sed -i "/.ifdef MAIN_HARDCODE_PRIMARY_HOSTNAME/i\MAIN_HARDCODE_PRIMARY_HOSTNAME = $DOMAIN_NAME\nMAIN_TLS_ENABLE = true" /etc/exim4/exim4.conf.template
sed -i "s|SMTPLISTENEROPTIONS=''|SMTPLISTENEROPTIONS='-oX 465:25:587 -oP /var/run/exim4/exim.pid'|g" /etc/default/exim4
if ! grep -q "tls_on_connect_ports=465" /etc/exim4/exim4.conf.template; then
sed -i '/SSL configuration for exim/i\tls_on_connect_ports=465' /etc/exim4/exim4.conf.template
fi
adduser $MY_USERNAME sasl
addgroup Debian-exim sasl
/etc/init.d/exim4 restart
if [ ! -d /etc/skel/Maildir ]; then
mkdir -m 700 /etc/skel/Maildir
mkdir -m 700 /etc/skel/Maildir/Sent
mkdir -m 700 /etc/skel/Maildir/Sent/tmp
mkdir -m 700 /etc/skel/Maildir/Sent/cur
mkdir -m 700 /etc/skel/Maildir/Sent/new
mkdir -m 700 /etc/skel/Maildir/.learn-spam
mkdir -m 700 /etc/skel/Maildir/.learn-spam/cur
mkdir -m 700 /etc/skel/Maildir/.learn-spam/new
mkdir -m 700 /etc/skel/Maildir/.learn-spam/tmp
mkdir -m 700 /etc/skel/Maildir/.learn-ham
mkdir -m 700 /etc/skel/Maildir/.learn-ham/cur
mkdir -m 700 /etc/skel/Maildir/.learn-ham/new
mkdir -m 700 /etc/skel/Maildir/.learn-ham/tmp
ln -s /etc/skel/Maildir/.learn-spam /etc/skel/Maildir/spam
ln -s /etc/skel/Maildir/.learn-ham /etc/skel/Maildir/ham
fi
if [ ! -d /home/$MY_USERNAME/Maildir ]; then
mkdir -m 700 /home/$MY_USERNAME/Maildir
mkdir -m 700 /home/$MY_USERNAME/Maildir/cur
mkdir -m 700 /home/$MY_USERNAME/Maildir/tmp
mkdir -m 700 /home/$MY_USERNAME/Maildir/new
mkdir -m 700 /home/$MY_USERNAME/Maildir/Sent
mkdir -m 700 /home/$MY_USERNAME/Maildir/Sent/cur
mkdir -m 700 /home/$MY_USERNAME/Maildir/Sent/tmp
mkdir -m 700 /home/$MY_USERNAME/Maildir/Sent/new
mkdir -m 700 /home/$MY_USERNAME/Maildir/.learn-spam
mkdir -m 700 /home/$MY_USERNAME/Maildir/.learn-spam/cur
mkdir -m 700 /home/$MY_USERNAME/Maildir/.learn-spam/new
mkdir -m 700 /home/$MY_USERNAME/Maildir/.learn-spam/tmp
mkdir -m 700 /home/$MY_USERNAME/Maildir/.learn-ham
mkdir -m 700 /home/$MY_USERNAME/Maildir/.learn-ham/cur
mkdir -m 700 /home/$MY_USERNAME/Maildir/.learn-ham/new
mkdir -m 700 /home/$MY_USERNAME/Maildir/.learn-ham/tmp
ln -s /home/$MY_USERNAME/Maildir/.learn-spam /home/$MY_USERNAME/Maildir/spam
ln -s /home/$MY_USERNAME/Maildir/.learn-ham /home/$MY_USERNAME/Maildir/ham
chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/Maildir
fi
echo 'configure_email' >> $COMPLETION_FILE
}
function spam_filtering {
# NOTE: spamassassin installation currently doesn't work, sa-compile fails with a make error 23/09/2014
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "spam_filtering" $COMPLETION_FILE; then
return
fi
apt-get -y --force-yes install exim4-daemon-heavy
apt-get -y --force-yes install spamassassin
sa-update -v
sed -i 's/ENABLED=0/ENABLED=1/g' /etc/default/spamassassin
sed -i 's/# spamd_address = 127.0.0.1 783/spamd_address = 127.0.0.1 783/g' /etc/exim4/exim4.conf.template
# This configuration is based on https://wiki.debian.org/DebianSpamAssassin
sed -i 's/local_parts = postmaster/local_parts = postmaster:abuse/g' /etc/exim4/conf.d/acl/30_exim4-config_check_rcpt
sed -i '/domains = +local_domains : +relay_to_domains/a\ set acl_m0 = rfcnames' /etc/exim4/conf.d/acl/30_exim4-config_check_rcpt
sed -i 's/accept/accept condition = ${if eq{$acl_m0}{rfcnames} {1}{0}}/g' /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo 'warn message = X-Spam-Score: $spam_score ($spam_bar)' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo ' spam = nobody:true' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo 'warn message = X-Spam-Flag: YES' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo ' spam = nobody' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo 'warn message = X-Spam-Report: $spam_report' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo ' spam = nobody' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo '# reject spam at high scores (> 12)' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo 'deny message = This message scored $spam_score spam points.' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo ' spam = nobody:true' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
echo ' condition = ${if >{$spam_score_int}{120}{1}{0}}' >> /etc/exim4/conf.d/acl/40_exim4-config_check_data
# procmail configuration
echo 'MAILDIR=$HOME/Maildir' > /home/$MY_USERNAME/.procmailrc
echo 'DEFAULT=$MAILDIR/' >> /home/$MY_USERNAME/.procmailrc
echo 'LOGFILE=$HOME/log/procmail.log' >> /home/$MY_USERNAME/.procmailrc
echo 'LOGABSTRACT=all' >> /home/$MY_USERNAME/.procmailrc
echo '# get spamassassin to check emails' >> /home/$MY_USERNAME/.procmailrc
echo ':0fw: .spamassassin.lock' >> /home/$MY_USERNAME/.procmailrc
echo ' * < 256000' >> /home/$MY_USERNAME/.procmailrc
echo '| spamc' >> /home/$MY_USERNAME/.procmailrc
echo '# strong spam are discarded' >> /home/$MY_USERNAME/.procmailrc
echo ':0' >> /home/$MY_USERNAME/.procmailrc
echo ' * ^X-Spam-Level: \*\*\*\*\*\*' >> /home/$MY_USERNAME/.procmailrc
echo '/dev/null' >> /home/$MY_USERNAME/.procmailrc
echo '# weak spam are kept just in case - clear this out every now and then' >> /home/$MY_USERNAME/.procmailrc
echo ':0' >> /home/$MY_USERNAME/.procmailrc
echo ' * ^X-Spam-Level: \*\*\*\*\*' >> /home/$MY_USERNAME/.procmailrc
echo '.0-spam/' >> /home/$MY_USERNAME/.procmailrc
echo '# otherwise, marginal spam goes here for revision' >> /home/$MY_USERNAME/.procmailrc
echo ':0' >> /home/$MY_USERNAME/.procmailrc
echo ' * ^X-Spam-Level: \*\*' >> /home/$MY_USERNAME/.procmailrc
echo '.spam/' >> /home/$MY_USERNAME/.procmailrc
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.procmailrc
# filtering scripts
echo '#!/bin/bash' > /usr/bin/filterspam
echo 'USERNAME=$1' >> /usr/bin/filterspam
echo 'MAILDIR=/home/$USERNAME/Maildir/.learn-spam' >> /usr/bin/filterspam
echo 'if [ ! -d "$MAILDIR" ]; then' >> /usr/bin/filterspam
echo ' exit' >> /usr/bin/filterspam
echo 'fi' >> /usr/bin/filterspam
echo 'for f in `ls $MAILDIR/cur`' >> /usr/bin/filterspam
echo 'do' >> /usr/bin/filterspam
echo ' spamc -L spam < "$MAILDIR/cur/$f" > /dev/null' >> /usr/bin/filterspam
echo ' rm "$MAILDIR/cur/$f"' >> /usr/bin/filterspam
echo 'done' >> /usr/bin/filterspam
echo 'for f in `ls $MAILDIR/new`' >> /usr/bin/filterspam
echo 'do' >> /usr/bin/filterspam
echo ' spamc -L spam < "$MAILDIR/new/$f" > /dev/null' >> /usr/bin/filterspam
echo ' rm "$MAILDIR/new/$f"' >> /usr/bin/filterspam
echo 'done' >> /usr/bin/filterspam
echo '#!/bin/bash' > /usr/bin/filterham
echo 'USERNAME=$1' >> /usr/bin/filterham
echo 'MAILDIR=/home/$USERNAME/Maildir/.learn-ham' >> /usr/bin/filterham
echo 'if [ ! -d "$MAILDIR" ]; then' >> /usr/bin/filterham
echo ' exit' >> /usr/bin/filterham
echo 'fi' >> /usr/bin/filterham
echo 'for f in `ls $MAILDIR/cur`' >> /usr/bin/filterham
echo 'do' >> /usr/bin/filterham
echo ' spamc -L ham < "$MAILDIR/cur/$f" > /dev/null' >> /usr/bin/filterham
echo ' rm "$MAILDIR/cur/$f"' >> /usr/bin/filterham
echo 'done' >> /usr/bin/filterham
echo 'for f in `ls $MAILDIR/new`' >> /usr/bin/filterham
echo 'do' >> /usr/bin/filterham
echo ' spamc -L ham < "$MAILDIR/new/$f" > /dev/null' >> /usr/bin/filterham
echo ' rm "$MAILDIR/new/$f"' >> /usr/bin/filterham
echo 'done' >> /usr/bin/filterham
if ! grep -q "filterspam" /etc/crontab; then
echo "*/3 * * * * root /usr/bin/timeout 120 /usr/bin/filterspam $MY_USERNAME" >> /etc/crontab
fi
if ! grep -q "filterham" /etc/crontab; then
echo "*/3 * * * * root /usr/bin/timeout 120 /usr/bin/filterham $MY_USERNAME" >> /etc/crontab
fi
chmod 655 /usr/bin/filterspam /usr/bin/filterham
sed -i 's/# use_bayes 1/use_bayes 1/g' /etc/mail/spamassassin/local.cf
sed -i 's/# bayes_auto_learn 1/bayes_auto_learn 1/g' /etc/mail/spamassassin/local.cf
service spamassassin restart
service exim4 restart
service cron restart
echo 'spam_filtering' >> $COMPLETION_FILE
}
function configure_imap {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "configure_imap" $COMPLETION_FILE; then
return
fi
apt-get -y --force-yes install dovecot-common dovecot-imapd
makecert dovecot
chown root:dovecot /etc/ssl/certs/dovecot.crt
chown root:dovecot /etc/ssl/private/dovecot.key
chown root:dovecot /etc/ssl/private/dovecot.dhparams
sed -i 's|#ssl = yes|ssl = yes|g' /etc/dovecot/conf.d/10-ssl.conf
sed -i 's|ssl_cert = </etc/dovecot/dovecot.pem|ssl_cert = </etc/ssl/certs/dovecot.crt|g' /etc/dovecot/conf.d/10-ssl.conf
sed -i 's|ssl_key = </etc/dovecot/private/dovecot.pem|/etc/ssl/private/dovecot.key|g' /etc/dovecot/conf.d/10-ssl.conf
sed -i 's|#ssl_dh_parameters_length = 1024|ssl_dh_parameters_length = 1024|g' /etc/dovecot/conf.d/10-ssl.conf
sed -i 's/#ssl_prefer_server_ciphers = no/ssl_prefer_server_ciphers = yes/g' /etc/dovecot/conf.d/10-ssl.conf
echo "ssl_cipher_list = '$SSL_CIPHERS'" >> /etc/dovecot/conf.d/10-ssl.conf
sed -i 's/#listen = *, ::/listen = */g' /etc/dovecot/dovecot.conf
sed -i 's/#disable_plaintext_auth = yes/disable_plaintext_auth = no/g' /etc/dovecot/conf.d/10-auth.conf
sed -i 's/auth_mechanisms = plain/auth_mechanisms = plain login/g' /etc/dovecot/conf.d/10-auth.conf
sed -i 's|# mail_location = maildir:~/Maildir| mail_location = maildir:~/Maildir:LAYOUT=fs|g' /etc/dovecot/conf.d/10-mail.conf
echo 'configure_imap' >> $COMPLETION_FILE
}
function configure_gpg {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "configure_gpg" $COMPLETION_FILE; then
return
fi
apt-get -y --force-yes install gnupg
if [ ! -d /home/$MY_USERNAME/.gnupg ]; then
mkdir /home/$MY_USERNAME/.gnupg
echo 'keyserver hkp://keys.gnupg.net' >> /home/$MY_USERNAME/.gnupg/gpg.conf
echo 'keyserver-options auto-key-retrieve' >> /home/$MY_USERNAME/.gnupg/gpg.conf
fi
sed -i "s|keyserver hkp://keys.gnupg.net|keyserver $GPG_KEYSERVER|g" /home/$MY_USERNAME/.gnupg/gpg.conf
if ! grep -q "# default preferences" /home/$MY_USERNAME/.gnupg/gpg.conf; then
echo '' >> /home/$MY_USERNAME/.gnupg/gpg.conf
echo '# default preferences' >> /home/$MY_USERNAME/.gnupg/gpg.conf
echo 'personal-digest-preferences SHA256' >> /home/$MY_USERNAME/.gnupg/gpg.conf
echo 'cert-digest-algo SHA256' >> /home/$MY_USERNAME/.gnupg/gpg.conf
echo 'default-preference-list SHA512 SHA384 SHA256 SHA224 AES256 AES192 AES CAST5 ZLIB BZIP2 ZIP Uncompressed' >> /home/$MY_USERNAME/.gnupg/gpg.conf
fi
chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.gnupg
if [[ $MY_GPG_PUBLIC_KEY && $MY_GPG_PRIVATE_KEY ]]; then
# use your existing GPG keys which were exported
if [ ! -f $MY_GPG_PUBLIC_KEY ]; then
echo "GPG public key file $MY_GPG_PUBLIC_KEY was not found"
exit 5
fi
if [ ! -f $MY_GPG_PRIVATE_KEY ]; then
echo "GPG private key file $MY_GPG_PRIVATE_KEY was not found"
exit 6
fi
su -c "gpg --import $MY_GPG_PUBLIC_KEY" - $MY_USERNAME
su -c "gpg --allow-secret-key-import --import $MY_GPG_PRIVATE_KEY" - $MY_USERNAME
# for security ensure that the private key file doesn't linger around
shred -zu $MY_GPG_PRIVATE_KEY
else
# Generate a GPG key
echo 'Key-Type: 1' > /home/$MY_USERNAME/gpg-genkey.conf
echo 'Key-Length: 4096' >> /home/$MY_USERNAME/gpg-genkey.conf
echo 'Subkey-Type: 1' >> /home/$MY_USERNAME/gpg-genkey.conf
echo 'Subkey-Length: 4096' >> /home/$MY_USERNAME/gpg-genkey.conf
echo "Name-Real: $MY_USERNAME@$DOMAIN_NAME" >> /home/$MY_USERNAME/gpg-genkey.conf
echo "Name-Email: $MY_USERNAME@$DOMAIN_NAME" >> /home/$MY_USERNAME/gpg-genkey.conf
echo 'Expire-Date: 0' >> /home/$MY_USERNAME/gpg-genkey.conf
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/gpg-genkey.conf
su -c "gpg --batch --gen-key /home/$MY_USERNAME/gpg-genkey.conf" - $MY_USERNAME
shred -zu /home/$MY_USERNAME/gpg-genkey.conf
MY_GPG_PUBLIC_KEY_ID=$(su -c "gpg --list-keys $DOMAIN_NAME | grep 'pub ' | awk -F ' ' '{print $2}' | awk -F '/' '{print $2}'" - $MY_USERNAME)
MY_GPG_PUBLIC_KEY=/tmp/public_key.gpg
su -c "gpg --output $MY_GPG_PUBLIC_KEY --armor --export $MY_GPG_PUBLIC_KEY_ID" - $MY_USERNAME
fi
echo 'configure_gpg' >> $COMPLETION_FILE
}
function email_client {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "email_client" $COMPLETION_FILE; then
return
fi
apt-get -y --force-yes install mutt-patched lynx abook
if [ ! -d /home/$MY_USERNAME/.mutt ]; then
mkdir /home/$MY_USERNAME/.mutt
fi
echo "text/html; lynx -dump -width=78 -nolist %s | sed ‘s/^ //’; copiousoutput; needsterminal; nametemplate=%s.html" > /home/$MY_USERNAME/.mutt/mailcap
chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.mutt
echo 'set mbox_type=Maildir' >> /etc/Muttrc
echo 'set folder="~/Maildir"' >> /etc/Muttrc
echo 'set mask="!^\\.[^.]"' >> /etc/Muttrc
echo 'set mbox="~/Maildir"' >> /etc/Muttrc
echo 'set record="+Sent"' >> /etc/Muttrc
echo 'set postponed="+Drafts"' >> /etc/Muttrc
echo 'set trash="+Trash"' >> /etc/Muttrc
echo 'set spoolfile="~/Maildir"' >> /etc/Muttrc
echo 'auto_view text/x-vcard text/html text/enriched' >> /etc/Muttrc
echo 'set editor="emacs"' >> /etc/Muttrc
echo 'set header_cache="+.cache"' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo 'macro index S "<tag-prefix><save-message>=.learn-spam<enter>" "move to learn-spam"' >> /etc/Muttrc
echo 'macro pager S "<save-message>=.learn-spam<enter>" "move to learn-spam"' >> /etc/Muttrc
echo 'macro index H "<tag-prefix><copy-message>=.learn-ham<enter>" "copy to learn-ham"' >> /etc/Muttrc
echo 'macro pager H "<copy-message>=.learn-ham<enter>" "copy to learn-ham"' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# set up the sidebar' >> /etc/Muttrc
echo 'set sidebar_width=12' >> /etc/Muttrc
echo 'set sidebar_visible=yes' >> /etc/Muttrc
echo "set sidebar_delim='|'" >> /etc/Muttrc
echo 'set sidebar_sort=yes' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo 'set rfc2047_parameters' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# Show inbox and sent items' >> /etc/Muttrc
echo 'mailboxes = =Sent' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# Alter these colours as needed for maximum bling' >> /etc/Muttrc
echo 'color sidebar_new yellow default' >> /etc/Muttrc
echo 'color normal white default' >> /etc/Muttrc
echo 'color hdrdefault brightcyan default' >> /etc/Muttrc
echo 'color signature green default' >> /etc/Muttrc
echo 'color attachment brightyellow default' >> /etc/Muttrc
echo 'color quoted green default' >> /etc/Muttrc
echo 'color quoted1 white default' >> /etc/Muttrc
echo 'color tilde blue default' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# ctrl-n, ctrl-p to select next, prev folder' >> /etc/Muttrc
echo '# ctrl-o to open selected folder' >> /etc/Muttrc
echo 'bind index \Cp sidebar-prev' >> /etc/Muttrc
echo 'bind index \Cn sidebar-next' >> /etc/Muttrc
echo 'bind index \Co sidebar-open' >> /etc/Muttrc
echo 'bind pager \Cp sidebar-prev' >> /etc/Muttrc
echo 'bind pager \Cn sidebar-next' >> /etc/Muttrc
echo 'bind pager \Co sidebar-open' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# ctrl-b toggles sidebar visibility' >> /etc/Muttrc
echo "macro index,pager \Cb '<enter-command>toggle sidebar_visible<enter><redraw-screen>' 'toggle sidebar'" >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# esc-m Mark new messages as read' >> /etc/Muttrc
echo 'macro index <esc>m "T~N<enter>;WNT~O<enter>;WO\CT~T<enter>" "mark all messages read"' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# Collapsing threads' >> /etc/Muttrc
echo 'macro index [ "<collapse-thread>" "collapse/uncollapse thread"' >> /etc/Muttrc
echo 'macro index ] "<collapse-all>" "collapse/uncollapse all threads"' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# threads containing new messages' >> /etc/Muttrc
echo 'uncolor index "~(~N)"' >> /etc/Muttrc
echo 'color index brightblue default "~(~N)"' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# new messages themselves' >> /etc/Muttrc
echo 'uncolor index "~N"' >> /etc/Muttrc
echo 'color index brightyellow default "~N"' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# GPG/PGP integration' >> /etc/Muttrc
echo '# this set the number of seconds to keep in memory the passphrase used to encrypt/sign' >> /etc/Muttrc
echo 'set pgp_timeout=60' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo '# automatically sign and encrypt with PGP/MIME' >> /etc/Muttrc
echo 'set pgp_autosign # autosign all outgoing mails' >> /etc/Muttrc
echo 'set pgp_autoencrypt # Try to encrypt automatically' >> /etc/Muttrc
echo 'set pgp_replyencrypt # autocrypt replies to crypted' >> /etc/Muttrc
echo 'set pgp_replysign # autosign replies to signed' >> /etc/Muttrc
echo 'set pgp_auto_decode=yes # decode attachments' >> /etc/Muttrc
echo 'set fcc_clear # Keep cleartext copy of sent encrypted mail' >> /etc/Muttrc
echo 'unset smime_is_default' >> /etc/Muttrc
echo '' >> /etc/Muttrc
echo 'set alias_file=~/.mutt-alias' >> /etc/Muttrc
echo 'source ~/.mutt-alias' >> /etc/Muttrc
echo 'set query_command= "abook --mutt-query \"%s\""' >> /etc/Muttrc
echo 'macro index,pager A "<pipe-message>abook --add-email-quiet<return>" "add the sender address to abook"' >> /etc/Muttrc
cp -f /etc/Muttrc /home/$MY_USERNAME/.muttrc
touch /home/$MY_USERNAME/.mutt-alias
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.muttrc
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.mutt-alias
echo 'email_client' >> $COMPLETION_FILE
}
function folders_for_mailing_lists {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "folders_for_mailing_lists" $COMPLETION_FILE; then
return
fi
echo '#!/bin/bash' > /usr/bin/mailinglistrule
echo 'MYUSERNAME=$1' >> /usr/bin/mailinglistrule
echo 'MAILINGLIST=$2' >> /usr/bin/mailinglistrule
echo 'SUBJECTTAG=$3' >> /usr/bin/mailinglistrule
echo 'MUTTRC=/home/$MYUSERNAME/.muttrc' >> /usr/bin/mailinglistrule
echo 'PM=/home/$MYUSERNAME/.procmailrc' >> /usr/bin/mailinglistrule
echo 'LISTDIR=/home/$MYUSERNAME/Maildir/$MAILINGLIST' >> /usr/bin/mailinglistrule
echo 'if ! [[ $MYUSERNAME && $MAILINGLIST && $SUBJECTTAG ]]; then' >> /usr/bin/mailinglistrule
echo ' echo "mailinglistsrule [user name] [mailing list name] [subject tag]"' >> /usr/bin/mailinglistrule
echo ' exit 1' >> /usr/bin/mailinglistrule
echo 'fi' >> /usr/bin/mailinglistrule
echo 'if [ ! -d "$LISTDIR" ]; then' >> /usr/bin/mailinglistrule
echo ' mkdir -m 700 $LISTDIR' >> /usr/bin/mailinglistrule
echo ' mkdir -m 700 $LISTDIR/tmp' >> /usr/bin/mailinglistrule
echo ' mkdir -m 700 $LISTDIR/new' >> /usr/bin/mailinglistrule
echo ' mkdir -m 700 $LISTDIR/cur' >> /usr/bin/mailinglistrule
echo 'fi' >> /usr/bin/mailinglistrule
echo 'chown -R $MYUSERNAME:$MYUSERNAME $LISTDIR' >> /usr/bin/mailinglistrule
echo 'echo "" >> $PM' >> /usr/bin/mailinglistrule
echo 'echo ":0" >> $PM' >> /usr/bin/mailinglistrule
echo 'echo " * ^Subject:.*()\[$SUBJECTTAG\]" >> $PM' >> /usr/bin/mailinglistrule
echo 'echo "$LISTDIR/new" >> $PM' >> /usr/bin/mailinglistrule
echo 'chown $MYUSERNAME:$MYUSERNAME $PM' >> /usr/bin/mailinglistrule
echo 'if [ ! -f "$MUTTRC" ]; then' >> /usr/bin/mailinglistrule
echo ' cp /etc/Muttrc $MUTTRC' >> /usr/bin/mailinglistrule
echo ' chown $MYUSERNAME:$MYUSERNAME $MUTTRC' >> /usr/bin/mailinglistrule
echo 'fi' >> /usr/bin/mailinglistrule
echo 'PROCMAILLOG=/home/$MYUSERNAME/log' >> /usr/bin/mailinglistrule
echo 'if [ ! -d $PROCMAILLOG ]; then' >> /usr/bin/mailinglistrule
echo ' mkdir $PROCMAILLOG' >> /usr/bin/mailinglistrule
echo ' chown -R $MYUSERNAME:$MYUSERNAME $PROCMAILLOG' >> /usr/bin/mailinglistrule
echo 'fi' >> /usr/bin/mailinglistrule
echo 'MUTT_MAILBOXES=$(grep "mailboxes =" $MUTTRC)' >> /usr/bin/mailinglistrule
echo 'if [[ $MUTT_MAILBOXES != *$MAILINGLIST* ]]; then' >> /usr/bin/mailinglistrule
echo ' sed -i "s|$MUTT_MAILBOXES|$MUTT_MAILBOXES =$MAILINGLIST|g" $MUTTRC' >> /usr/bin/mailinglistrule
echo ' chown $MYUSERNAME:$MYUSERNAME $MUTTRC' >> /usr/bin/mailinglistrule
echo 'fi' >> /usr/bin/mailinglistrule
chmod +x /usr/bin/mailinglistrule
echo 'folders_for_mailing_lists' >> $COMPLETION_FILE
}
function folders_for_email_addresses {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "folders_for_email_addresses" $COMPLETION_FILE; then
return
fi
echo '#!/bin/bash' > /usr/bin/emailrule
echo 'MYUSERNAME=$1' >> /usr/bin/emailrule
echo 'EMAILADDRESS=$2' >> /usr/bin/emailrule
echo 'MAILINGLIST=$3' >> /usr/bin/emailrule
echo 'MUTTRC=/home/$MYUSERNAME/.muttrc' >> /usr/bin/emailrule
echo 'PM=/home/$MYUSERNAME/.procmailrc' >> /usr/bin/emailrule
echo 'LISTDIR=/home/$MYUSERNAME/Maildir/$MAILINGLIST' >> /usr/bin/emailrule
echo 'if ! [[ $MYUSERNAME && $EMAILADDRESS && $MAILINGLIST ]]; then' >> /usr/bin/emailrule
echo ' echo "emailrule [user name] [email address] [mailing list name]"' >> /usr/bin/emailrule
echo ' exit 1' >> /usr/bin/emailrule
echo 'fi' >> /usr/bin/emailrule
echo 'if [ ! -d "$LISTDIR" ]; then' >> /usr/bin/emailrule
echo ' mkdir -m 700 $LISTDIR' >> /usr/bin/emailrule
echo ' mkdir -m 700 $LISTDIR/tmp' >> /usr/bin/emailrule
echo ' mkdir -m 700 $LISTDIR/new' >> /usr/bin/emailrule
echo ' mkdir -m 700 $LISTDIR/cur' >> /usr/bin/emailrule
echo 'fi' >> /usr/bin/emailrule
echo 'chown -R $MYUSERNAME:$MYUSERNAME $LISTDIR' >> /usr/bin/emailrule
echo 'echo "" >> $PM' >> /usr/bin/emailrule
echo 'echo ":0" >> $PM' >> /usr/bin/emailrule
echo 'echo " * ^From: $EMAILADDRESS" >> $PM' >> /usr/bin/emailrule
echo 'echo "$LISTDIR/new" >> $PM' >> /usr/bin/emailrule
echo 'chown $MYUSERNAME:$MYUSERNAME $PM' >> /usr/bin/emailrule
echo 'if [ ! -f "$MUTTRC" ]; then' >> /usr/bin/emailrule
echo ' cp /etc/Muttrc $MUTTRC' >> /usr/bin/emailrule
echo ' chown $MYUSERNAME:$MYUSERNAME $MUTTRC' >> /usr/bin/emailrule
echo 'fi' >> /usr/bin/emailrule
echo 'PROCMAILLOG=/home/$MYUSERNAME/log' >> /usr/bin/emailrule
echo 'if [ ! -d $PROCMAILLOG ]; then' >> /usr/bin/emailrule
echo ' mkdir $PROCMAILLOG' >> /usr/bin/emailrule
echo ' chown -R $MYUSERNAME:$MYUSERNAME $PROCMAILLOG' >> /usr/bin/emailrule
echo 'fi' >> /usr/bin/emailrule
echo 'MUTT_MAILBOXES=$(grep "mailboxes =" $MUTTRC)' >> /usr/bin/emailrule
echo 'if [[ $MUTT_MAILBOXES != *$MAILINGLIST* ]]; then' >> /usr/bin/emailrule
echo ' sed -i "s|$MUTT_MAILBOXES|$MUTT_MAILBOXES =$MAILINGLIST|g" $MUTTRC' >> /usr/bin/emailrule
echo ' chown $MYUSERNAME:$MYUSERNAME $MUTTRC' >> /usr/bin/emailrule
echo 'fi' >> /usr/bin/emailrule
chmod +x /usr/bin/emailrule
echo 'folders_for_email_addresses' >> $COMPLETION_FILE
}
function dynamic_dns_freedns {
if grep -Fxq "dynamic_dns_freedns" $COMPLETION_FILE; then
return
fi
echo '#!/bin/bash' > /usr/bin/dynamicdns
echo '# subdomain name 1' >> /usr/bin/dynamicdns
echo "wget -O - https://freedns.afraid.org/dynamic/update.php?$FREEDNS_SUBDOMAIN_CODE== >> /dev/null 2>&1" >> /usr/bin/dynamicdns
echo '# add any other subdomains below' >> /usr/bin/dynamicdns
chmod 600 /usr/bin/dynamicdns
chmod +x /usr/bin/dynamicdns
if ! grep -q "dynamicdns" /etc/crontab; then
sed -i '/# m h dom mon dow user command/a\*/5 * * * * root /usr/bin/timeout 240 /usr/bin/dynamicdns' /etc/crontab
fi
service cron restart
echo 'dynamic_dns_freedns' >> $COMPLETION_FILE
}
function create_private_mailing_list {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
# This installation doesn't work, results in ruby errors
# There is currently no schleuder package for Debian jessie
if grep -Fxq "create_private_mailing_list" $COMPLETION_FILE; then
return
fi
if [ ! $PRIVATE_MAILING_LIST ]; then
return
fi
if [ $PRIVATE_MAILING_LIST == $MY_USERNAME ]; then
echo 'The name of the private mailing list should not be the'
echo 'same as your username'
exit 10
fi
if [ ! $MY_GPG_PUBLIC_KEY ]; then
echo 'To create a private mailing list you need to specify a file'
echo 'containing your exported GPG key within MY_GPG_PUBLIC_KEY at'
echo 'the top of the script'
exit 11
fi
apt-get -y --force-yes install ruby ruby-dev ruby-gpgme libgpgme11-dev libmagic-dev
gem install schleuder
schleuder-fix-gem-dependencies
schleuder-init-setup --gem
# NOTE: this is version number sensitive and so might need changing
ln -s /var/lib/gems/2.1.0/gems/schleuder-2.2.4 /var/lib/schleuder
sed -i 's/#smtp_port: 25/smtp_port: 465/g' /etc/schleuder/schleuder.conf
sed -i 's/#superadminaddr: root@localhost/superadminaddr: root@localhost' /etc/schleuder/schleuder.conf
schleuder-newlist $PRIVATE_MAILING_LIST@$DOMAIN_NAME -realname "$PRIVATE_MAILING_LIST" -adminaddress $MY_USERNAME@$DOMAIN_NAME -initmember $MY_USERNAME@$DOMAIN_NAME -initmemberkey $MY_GPG_PUBLIC_KEY -nointeractive
emailrule $MY_USERNAME $PRIVATE_MAILING_LIST@$DOMAIN_NAME $PRIVATE_MAILING_LIST
echo 'schleuder:' > /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo ' debug_print = "R: schleuder for $local_part@$domain"' >> /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo ' driver = accept' >> /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo ' local_part_suffix_optional' >> /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo ' local_part_suffix = +* : -bounce : -sendkey' >> /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo ' domains = +local_domains' >> /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo ' user = schleuder' >> /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo ' group = schleuder' >> /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo ' require_files = schleuder:+/var/lib/schleuder/$domain/${local_part}' >> /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo ' transport = schleuder_transport' >> /etc/exim4/conf.d/router/550_exim4-config_schleuder
echo 'schleuder_transport:' > /etc/exim4/conf.d/transport/30_exim4-config_schleuder
echo ' debug_print = "T: schleuder_transport for $local_part@$domain"' >> /etc/exim4/conf.d/transport/30_exim4-config_schleuder
echo ' driver = pipe' >> /etc/exim4/conf.d/transport/30_exim4-config_schleuder
echo ' home_directory = "/var/lib/schleuder/$domain/$local_part"' >> /etc/exim4/conf.d/transport/30_exim4-config_schleuder
echo ' command = "/usr/bin/schleuder $local_part@$domain"' >> /etc/exim4/conf.d/transport/30_exim4-config_schleuder
chown -R schleuder:schleuder /var/lib/schleuder
update-exim4.conf.template -r
update-exim4.conf
service exim4 restart
useradd -d /var/schleuderlists -s /bin/false schleuder
adduser Debian-exim schleuder
usermod -a -G mail schleuder
#exim -d -bt $PRIVATE_MAILING_LIST@$DOMAIN_NAME
echo 'create_private_mailing_list' >> $COMPLETION_FILE
}
function import_email {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
EMAIL_COMPLETE_MSG=' *** Freedombone mailbox installation is complete ***'
if grep -Fxq "import_email" $COMPLETION_FILE; then
if [[ $SYSTEM_TYPE == "$VARIANT_MAILBOX" ]]; then
echo $EMAIL_COMPLETE_MSG
if [ -d /media/usb ]; then
umount /media/usb
rm -rf /media/usb
echo ' You can now remove the USB drive'
fi
exit 0
fi
return
fi
if [ $IMPORT_MAILDIR ]; then
if [ -d $IMPORT_MAILDIR ]; then
echo 'Transfering email files'
cp -r $IMPORT_MAILDIR /home/$MY_USERNAME
chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/Maildir
else
echo "Email import directory $IMPORT_MAILDIR not found"
exit 9
fi
fi
echo 'import_email' >> $COMPLETION_FILE
if [[ $SYSTEM_TYPE == "$VARIANT_MAILBOX" ]]; then
apt-get -y --force-yes autoremove
# unmount any attached usb drive
echo ''
echo $EMAIL_COMPLETE_MSG
echo ''
if [ -d /media/usb ]; then
umount /media/usb
rm -rf /media/usb
echo ' You can now remove the USB drive'
fi
exit 0
fi
}
function install_web_server {
if [[ $SYSTEM_TYPE == "$VARIANT_CHAT" ]]; then
return
fi
if grep -Fxq "install_web_server" $COMPLETION_FILE; then
return
fi
# remove apache
apt-get -y remove --purge apache2
if [ -d /etc/apache2 ]; then
rm -rf /etc/apache2
fi
# install nginx
apt-get -y --force-yes install nginx php5-fpm git
# install a script to easily enable and disable nginx virtual hosts
if [ ! -d $INSTALL_DIR ]; then
mkdir $INSTALL_DIR
fi
cd $INSTALL_DIR
git clone https://github.com/perusio/nginx_ensite
cd $INSTALL_DIR/nginx_ensite
cp nginx_* /usr/sbin
nginx_dissite default
echo 'install_web_server' >> $COMPLETION_FILE
}
function configure_php {
sed -i "s/memory_limit = 128M/memory_limit = ${MAX_PHP_MEMORY}M/g" /etc/php5/fpm/php.ini
sed -i 's/;cgi.fix_pathinfo=1/cgi.fix_pathinfo=0/g' /etc/php5/fpm/php.ini
sed -i "s/memory_limit = -1/memory_limit = ${MAX_PHP_MEMORY}M/g" /etc/php5/cli/php.ini
sed -i "s/upload_max_filesize = 2M/upload_max_filesize = 50M/g" /etc/php5/fpm/php.ini
sed -i "s/post_max_size = 8M/post_max_size = 50M/g" /etc/php5/fpm/php.ini
}
function install_owncloud {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
OWNCLOUD_COMPLETION_MSG1=" *** Freedombone $SYSTEM_TYPE is now installed ***"
OWNCLOUD_COMPLETION_MSG2="Open $OWNCLOUD_DOMAIN_NAME in a web browser to complete the setup"
if grep -Fxq "install_owncloud" $COMPLETION_FILE; then
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" ]]; then
# unmount any attached usb drive
if [ -d /media/usb ]; then
umount /media/usb
rm -rf /media/usb
fi
echo ''
echo $OWNCLOUD_COMPLETION_MSG1
echo $OWNCLOUD_COMPLETION_MSG2
exit 0
fi
return
fi
# if this is exclusively a cloud setup
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" ]]; then
OWNCLOUD_DOMAIN_NAME=$DOMAIN_NAME
OWNCLOUD_FREEDNS_SUBDOMAIN_CODE=$FREEDNS_SUBDOMAIN_CODE
fi
if [ ! $OWNCLOUD_DOMAIN_NAME ]; then
return
fi
if ! [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" ]]; then
if [ ! $SYSTEM_TYPE ]; then
return
fi
fi
apt-get -y --force-yes install php5 php5-gd php-xml-parser php5-intl wget
apt-get -y --force-yes install php5-sqlite php5-mysql smbclient curl libcurl3 php5-curl bzip2
if [ ! -d /var/www/$OWNCLOUD_DOMAIN_NAME ]; then
mkdir /var/www/$OWNCLOUD_DOMAIN_NAME
mkdir /var/www/$OWNCLOUD_DOMAIN_NAME/htdocs
fi
echo 'server {' > /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' listen 80;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " server_name $OWNCLOUD_DOMAIN_NAME;" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^ https://$server_name$request_uri? permanent;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo '}' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo 'server {' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' listen 443 ssl;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " root /var/www/$OWNCLOUD_DOMAIN_NAME/htdocs;" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " server_name $OWNCLOUD_DOMAIN_NAME;" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' ssl on;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " ssl_certificate /etc/ssl/certs/$OWNCLOUD_DOMAIN_NAME.crt;" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " ssl_certificate_key /etc/ssl/private/$OWNCLOUD_DOMAIN_NAME.key;" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " ssl_dhparam /etc/ssl/certs/$OWNCLOUD_DOMAIN_NAME.dhparam;" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' ssl_session_timeout 5m;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' ssl_prefer_server_ciphers on;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " ssl_protocols $SSL_PROTOCOLS; # not possible to do exclusive" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " ssl_ciphers '$SSL_CIPHERS';" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' add_header X-Frame-Options DENY;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' add_header X-Content-Type-Options nosniff;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' add_header Strict-Transport-Security max-age=15768000;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' # if you want to be able to access the site via HTTP' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' # then replace the above with the following:' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' # add_header Strict-Transport-Security "max-age=0;";' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " # make sure webfinger and other well known services aren't blocked" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' # by denying dot files and rewrite request to the front controller' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' location ^~ /.well-known/ {' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' allow all;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^/(.*) /index.php?q=$uri&$args last;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' client_max_body_size 10G; # set max upload size' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' client_body_buffer_size 128k;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' fastcgi_buffers 64 4K;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^/caldav(.*)$ /remote.php/caldav$1 redirect;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^/carddav(.*)$ /remote.php/carddav$1 redirect;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^/webdav(.*)$ /remote.php/webdav$1 redirect;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' index index.php;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' error_page 403 /core/templates/403.php;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' error_page 404 /core/templates/404.php;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' location = /robots.txt {' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' allow all;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' log_not_found off;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' access_log off;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' location ~ ^/(data|config|\.ht|db_structure\.xml|README) {' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' location / {' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' # The following 2 rules are only needed with webfinger' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^/.well-known/host-meta /public.php?service=host-meta last;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^/.well-known/host-meta.json /public.php?service=host-meta-json last;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^/.well-known/carddav /remote.php/carddav/ redirect;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^/.well-known/caldav /remote.php/caldav/ redirect;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' rewrite ^(/core/doc/[^\/]+/)$ $1/index.html;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' try_files $uri $uri/ index.php;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' location ~ ^(.+?\.php)(/.*)?$ {' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' try_files $1 =404;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' fastcgi_split_path_info ^(.+\.php)(/.+)$;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' fastcgi_pass unix:/var/run/php5-fpm.sock;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' fastcgi_index index.php;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' include fastcgi_params;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' fastcgi_param SCRIPT_FILENAME $document_root$1;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' fastcgi_param PATH_INFO $2;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' fastcgi_param HTTPS on;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' # Optional: set long EXPIRES header on static assets' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' location ~* ^.+\.(jpg|jpeg|gif|bmp|ico|png|css|js|swf)$ {' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' expires 30d;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo " # Optional: Don't log access to assets" >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' access_log off;' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
echo '}' >> /etc/nginx/sites-available/$OWNCLOUD_DOMAIN_NAME
configure_php
if [ ! -f /etc/ssl/private/$OWNCLOUD_DOMAIN_NAME.key ]; then
makecert $OWNCLOUD_DOMAIN_NAME
fi
# download owncloud
cd $INSTALL_DIR
if [ ! -f $INSTALL_DIR/$OWNCLOUD_ARCHIVE ]; then
wget $OWNCLOUD_DOWNLOAD
fi
if [ ! -f $INSTALL_DIR/$OWNCLOUD_ARCHIVE ]; then
echo 'Owncloud could not be downloaded. Check that it exists at '
echo $OWNCLOUD_DOWNLOAD
echo 'And if neccessary update the version number and hash within this script'
exit 18
fi
# Check that the hash is correct
CHECKSUM=$(sha256sum $OWNCLOUD_ARCHIVE | awk -F ' ' '{print $1}')
if [[ $CHECKSUM != $OWNCLOUD_HASH ]]; then
echo 'The sha256 hash of the owncloud download is incorrect. Possibly the file may have been tampered with. Check the hash on the Owncloud web site.'
echo $CHECKSUM
echo $OWNCLOUD_HASH
exit 19
fi
tar -xjf $OWNCLOUD_ARCHIVE
echo 'Copying files...'
cp -r owncloud/* /var/www/$OWNCLOUD_DOMAIN_NAME/htdocs
chown -R www-data:www-data /var/www/$OWNCLOUD_DOMAIN_NAME/htdocs/apps
chown -R www-data:www-data /var/www/$OWNCLOUD_DOMAIN_NAME/htdocs/config
chown www-data:www-data /var/www/$OWNCLOUD_DOMAIN_NAME/htdocs
nginx_ensite $OWNCLOUD_DOMAIN_NAME
service php5-fpm restart
service nginx restart
# update the dynamic DNS
if [ $OWNCLOUD_FREEDNS_SUBDOMAIN_CODE ]; then
if [[ $OWNCLOUD_FREEDNS_SUBDOMAIN_CODE != $FREEDNS_SUBDOMAIN_CODE ]]; then
if ! grep -q "$OWNCLOUD_DOMAIN_NAME" /usr/bin/dynamicdns; then
echo "# $OWNCLOUD_DOMAIN_NAME" >> /usr/bin/dynamicdns
echo "wget -O - https://freedns.afraid.org/dynamic/update.php?$OWNCLOUD_FREEDNS_SUBDOMAIN_CODE== >> /dev/null 2>&1" >> /usr/bin/dynamicdns
fi
fi
else
echo 'WARNING: No freeDNS subdomain code given for Owncloud. It is assumed that you are using some other dynamic DNS provider.'
fi
echo 'install_owncloud' >> $COMPLETION_FILE
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" ]]; then
# unmount any attached usb drive
if [ -d /media/usb ]; then
umount /media/usb
rm -rf /media/usb
fi
echo ''
echo $OWNCLOUD_COMPLETION_MSG1
echo $OWNCLOUD_COMPLETION_MSG2
exit 0
fi
}
function install_xmpp {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "install_xmpp" $COMPLETION_FILE; then
return
fi
apt-get -y --force-yes install prosody
if [ ! -f "/etc/ssl/private/xmpp.key" ]; then
makecert xmpp
fi
chown prosody:prosody /etc/ssl/private/xmpp.key
chown prosody:prosody /etc/ssl/certs/xmpp.*
cp -a /etc/prosody/conf.avail/example.com.cfg.lua /etc/prosody/conf.avail/xmpp.cfg.lua
sed -i 's|/etc/prosody/certs/example.com.key|/etc/ssl/private/xmpp.key|g' /etc/prosody/conf.avail/xmpp.cfg.lua
sed -i 's|/etc/prosody/certs/example.com.crt|/etc/ssl/certs/xmpp.crt|g' /etc/prosody/conf.avail/xmpp.cfg.lua
if ! grep -q "xmpp.dhparam" /etc/prosody/conf.avail/xmpp.cfg.lua; then
sed -i '/certificate =/a\ dhparam = "/etc/ssl/certs/xmpp.dhparam";' /etc/prosody/conf.avail/xmpp.cfg.lua
fi
sed -i "s/example.com/$DOMAIN_NAME/g" /etc/prosody/conf.avail/xmpp.cfg.lua
sed -i 's/enabled = false -- Remove this line to enable this host//g' /etc/prosody/conf.avail/xmpp.cfg.lua
if ! grep -q "modules_enabled" /etc/prosody/conf.avail/xmpp.cfg.lua; then
echo '' >> /etc/prosody/conf.avail/xmpp.cfg.lua
echo 'modules_enabled = {' >> /etc/prosody/conf.avail/xmpp.cfg.lua
echo ' "bosh"; -- Enable mod_bosh' >> /etc/prosody/conf.avail/xmpp.cfg.lua
echo ' "tls"; -- Enable mod_tls' >> /etc/prosody/conf.avail/xmpp.cfg.lua
echo ' "saslauth"; -- Enable mod_saslauth' >> /etc/prosody/conf.avail/xmpp.cfg.lua
echo '}' >> /etc/prosody/conf.avail/xmpp.cfg.lua
echo '' >> /etc/prosody/conf.avail/xmpp.cfg.lua
echo 'c2s_require_encryption = true' >> /etc/prosody/conf.avail/xmpp.cfg.lua
echo 's2s_require_encryption = true' >> /etc/prosody/conf.avail/xmpp.cfg.lua
echo 'allow_unencrypted_plain_auth = false' >> /etc/prosody/conf.avail/xmpp.cfg.lua
fi
ln -sf /etc/prosody/conf.avail/xmpp.cfg.lua /etc/prosody/conf.d/xmpp.cfg.lua
sed -i 's|/etc/prosody/certs/localhost.key|/etc/ssl/private/xmpp.key|g' /etc/prosody/prosody.cfg.lua
sed -i 's|/etc/prosody/certs/localhost.crt|/etc/ssl/certs/xmpp.crt|g' /etc/prosody/prosody.cfg.lua
if ! grep -q "xmpp.dhparam" /etc/prosody/prosody.cfg.lua; then
sed -i '/certificate =/a\ dhparam = "/etc/ssl/certs/xmpp.dhparam";' /etc/prosody/prosody.cfg.lua
fi
sed -i 's/c2s_require_encryption = false/c2s_require_encryption = true/g' /etc/prosody/prosody.cfg.lua
if ! grep -q "s2s_require_encryption" /etc/prosody/prosody.cfg.lua; then
sed -i '/c2s_require_encryption/a\s2s_require_encryption = true' /etc/prosody/prosody.cfg.lua
fi
if ! grep -q "allow_unencrypted_plain_auth" /etc/prosody/prosody.cfg.lua; then
echo 'allow_unencrypted_plain_auth = false' >> /etc/prosody/conf.avail/xmpp.cfg.lua
fi
sed -i 's/--"bosh";/"bosh";/g' /etc/prosody/prosody.cfg.lua
sed -i 's/authentication = "internal_plain"/authentication = "internal_hashed"/g' /etc/prosody/prosody.cfg.lua
sed -i 's/enabled = false -- Remove this line to enable this host//g' /etc/prosody/prosody.cfg.lua
sed -i 's/example.com/$DOMAIN_NAME/g' /etc/prosody/prosody.cfg.lua
service prosody restart
touch /home/$MY_USERNAME/README
if ! grep -q "Your XMPP password is" /home/$MY_USERNAME/README; then
XMPP_PASSWORD=$(openssl rand -base64 8)
prosodyctl register $MY_USERNAME $DOMAIN_NAME $XMPP_PASSWORD
echo "Your XMPP password is: $XMPP_PASSWORD" >> /home/$MY_USERNAME/README
echo 'You can change it with: ' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo " prosodyctl passwd $MY_USERNAME@$DOMAIN_NAME" >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
fi
echo 'install_xmpp' >> $COMPLETION_FILE
}
function install_irc_server {
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "install_irc_server" $COMPLETION_FILE; then
return
fi
apt-get -y --force-yes install ngircd
if [ ! "/etc/ssl/private/ngircd.key" ]; then
makecert ngircd
fi
echo '**************************************************' > /etc/ngircd/motd
echo '* F R E E D O M B O N E I R C *' >> /etc/ngircd/motd
echo '* *' >> /etc/ngircd/motd
echo '* Freedom in the Cloud *' >> /etc/ngircd/motd
echo '**************************************************' >> /etc/ngircd/motd
sed -i 's|MotdFile = /etc/ngircd/ngircd.motd|MotdFile = /etc/ngircd/motd|g' /etc/ngircd/ngircd.conf
sed -i "s/irc@irc.example.com/$MY_USERNAME@$DOMAIN_NAME/g" /etc/ngircd/ngircd.conf
sed -i "s/irc.example.net/$DOMAIN_NAME/g" /etc/ngircd/ngircd.conf
sed -i "s|Yet another IRC Server running on Debian GNU/Linux|IRC Server of $DOMAIN_NAME|g" /etc/ngircd/ngircd.conf
sed -i 's/;Password = wealllikedebian/Password =/g' /etc/ngircd/ngircd.conf
sed -i 's|;CertFile = /etc/ssl/certs/server.crt|CertFile = /etc/ssl/certs/ngircd.crt|g' /etc/ngircd/ngircd.conf
sed -i 's|;DHFile = /etc/ngircd/dhparams.pem|DHFile = /etc/ssl/certs/ngircd.dhparam|g' /etc/ngircd/ngircd.conf
sed -i 's|;KeyFile = /etc/ssl/private/server.key|KeyFile = /etc/ssl/private/ngircd.key|g' /etc/ngircd/ngircd.conf
sed -i 's/;Ports = 6697, 9999/Ports = 6697, 9999/g' /etc/ngircd/ngircd.conf
sed -i 's/;Name = #ngircd/Name = #freedombone/g' /etc/ngircd/ngircd.conf
sed -i 's/;Topic = Our ngircd testing channel/Topic = Freedombone chat channel/g' /etc/ngircd/ngircd.conf
sed -i 's/;MaxUsers = 23/MaxUsers = 23/g' /etc/ngircd/ngircd.conf
sed -i 's|;KeyFile = /etc/ngircd/#chan.key|KeyFile = /etc/ngircd/#freedombone.key|g' /etc/ngircd/ngircd.conf
sed -i 's/;CloakHost = cloaked.host/CloakHost = cloaked.host/g' /etc/ngircd/ngircd.conf
IRC_SALT=$(openssl rand -base64 32)
IRC_OPERATOR_PASSWORD=$(openssl rand -base64 8)
sed -i "s|;CloakHostSalt = abcdefghijklmnopqrstuvwxyz|CloakHostSalt = $IRC_SALT|g" /etc/ngircd/ngircd.conf
sed -i 's/;ConnectIPv4 = yes/ConnectIPv4 = yes/g' /etc/ngircd/ngircd.conf
sed -i 's/;MorePrivacy = no/MorePrivacy = yes/g' /etc/ngircd/ngircd.conf
sed -i 's/;RequireAuthPing = no/RequireAuthPing = no/g' /etc/ngircd/ngircd.conf
sed -i "s/;Name = TheOper/Name = $MY_USERNAME/g" /etc/ngircd/ngircd.conf
sed -i "s/;Password = ThePwd/Password = $IRC_OPERATOR_PASSWORD/g" /etc/ngircd/ngircd.conf
service ngircd restart
echo 'install_irc_server' >> $COMPLETION_FILE
}
function install_wiki {
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "install_wiki" $COMPLETION_FILE; then
return
fi
# if this is exclusively a writer setup
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" ]]; then
WIKI_DOMAIN_NAME=$DOMAIN_NAME
WIKI_FREEDNS_SUBDOMAIN_CODE=$FREEDNS_SUBDOMAIN_CODE
fi
if [ ! $WIKI_DOMAIN_NAME ]; then
return
fi
if ! [[ $SYSTEM_TYPE == "$VARIANT_WRITER" ]]; then
if [ ! $SYSTEM_TYPE ]; then
return
fi
fi
apt-get -y --force-yes install php5 php5-gd php-xml-parser php5-intl wget
apt-get -y --force-yes install php5-sqlite php5-mysql smbclient curl libcurl3 php5-curl bzip2
if [ ! -d /var/www/$WIKI_DOMAIN_NAME ]; then
mkdir /var/www/$WIKI_DOMAIN_NAME
fi
if [ ! -d /var/www/$WIKI_DOMAIN_NAME/htdocs ]; then
mkdir /var/www/$WIKI_DOMAIN_NAME/htdocs
fi
if [ ! -f /etc/ssl/private/$WIKI_DOMAIN_NAME.key ]; then
makecert $WIKI_DOMAIN_NAME
fi
# download the archive
cd $INSTALL_DIR
if [ ! -f $INSTALL_DIR/$WIKI_ARCHIVE ]; then
wget $WIKI_DOWNLOAD
fi
if [ ! -f $INSTALL_DIR/$WIKI_ARCHIVE ]; then
echo 'Dokuwiki could not be downloaded. Check that it exists at '
echo $WIKI_DOWNLOAD
echo 'And if neccessary update the version number and hash within this script'
exit 18
fi
# Check that the hash is correct
CHECKSUM=$(sha256sum $WIKI_ARCHIVE | awk -F ' ' '{print $1}')
if [[ $CHECKSUM != $WIKI_HASH ]]; then
echo 'The sha256 hash of the Dokuwiki download is incorrect. Possibly the file may have been tampered with. Check the hash on the Dokuwiki web site.'
echo $CHECKSUM
echo $WIKI_HASH
exit 21
fi
tar -xzvf $WIKI_ARCHIVE
cd dokuwiki-*
mv * /var/www/$WIKI_DOMAIN_NAME/htdocs/
chmod -R 755 /var/www/$WIKI_DOMAIN_NAME/htdocs
chown -R www-data:www-data /var/www/$WIKI_DOMAIN_NAME/htdocs
if ! grep -q "video/ogg" /var/www/$WIKI_DOMAIN_NAME/htdocs/conf/mime.conf; then
echo 'ogv video/ogg' >> /var/www/$WIKI_DOMAIN_NAME/htdocs/conf/mime.conf
echo 'mp4 video/mp4' >> /var/www/$WIKI_DOMAIN_NAME/htdocs/conf/mime.conf
echo 'webm video/webm' >> /var/www/$WIKI_DOMAIN_NAME/htdocs/conf/mime.conf
fi
echo 'server {' > /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' listen 80;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " server_name $WIKI_DOMAIN_NAME;" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " root /var/www/$WIKI_DOMAIN_NAME/htdocs;" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " error_log /var/www/$WIKI_DOMAIN_NAME/error.log;" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' index index.php;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # Uncomment this if you need to redirect HTTP to HTTPS' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' #rewrite ^ https://$server_name$request_uri? permanent;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location / {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' try_files $uri $uri/ /index.php;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location ~ \.php$ {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' fastcgi_split_path_info ^(.+\.php)(/.+)$;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' fastcgi_pass unix:/var/run/php5-fpm.sock;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' fastcgi_index index.php;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' include fastcgi_params;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '}' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo 'server {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' listen 443 ssl;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " root /var/www/$WIKI_DOMAIN_NAME/htdocs;" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " server_name $WIKI_DOMAIN_NAME;" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " error_log /var/www/$WIKI_DOMAIN_NAME/error_ssl.log;" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' index index.php;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' charset utf-8;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' client_max_body_size 20m;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' client_body_buffer_size 128k;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' ssl on;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " ssl_certificate /etc/ssl/certs/$WIKI_DOMAIN_NAME.crt;" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " ssl_certificate_key /etc/ssl/private/$WIKI_DOMAIN_NAME.key;" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " ssl_dhparam /etc/ssl/certs/$WIKI_DOMAIN_NAME.dhparam;" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' ssl_session_timeout 5m;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' ssl_prefer_server_ciphers on;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' ssl_session_cache builtin:1000 shared:SSL:10m;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " ssl_protocols $SSL_PROTOCOLS; # not possible to do exclusive" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " ssl_ciphers '$SSL_CIPHERS';" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' add_header X-Frame-Options DENY;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' add_header X-Content-Type-Options nosniff;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' add_header Strict-Transport-Security "max-age=0;";' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # rewrite to front controller as default rule' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location / {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' rewrite ^/(.*) /index.php?q=$uri&$args last;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " # make sure webfinger and other well known services aren't blocked" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # by denying dot files and rewrite request to the front controller' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location ^~ /.well-known/ {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' allow all;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' rewrite ^/(.*) /index.php?q=$uri&$args last;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # statically serve these file types when possible' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # otherwise fall back to front controller' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # allow browser to cache them' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # added .htm for advanced source code editor library' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location ~* \.(jpg|jpeg|gif|png|ico|css|js|htm|html|ttf|woff|svg)$ {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' expires 30d;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' try_files $uri /index.php?q=$uri&$args;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # block these file types' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location ~* \.(tpl|md|tgz|log|out)$ {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # or a unix socket' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location ~* \.php$ {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # Zero-day exploit defense.' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # http://forum.nginx.org/read.php?2,88845,page=3' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " # Won't work properly (404 error) if the file is not stored on this" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " # server, which is entirely possible with php-fpm/php-fcgi." >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " # Comment the 'try_files' line out if you set up php-fpm/php-fcgi on" >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo " # another machine. And then cross your fingers that you won't get hacked." >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' try_files $uri $uri/ /index.php;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' fastcgi_split_path_info ^(.+\.php)(/.+)$;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # With php5-cgi alone:' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # fastcgi_pass 127.0.0.1:9000;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # With php5-fpm:' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' fastcgi_pass unix:/var/run/php5-fpm.sock;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' include fastcgi_params;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' fastcgi_index index.php;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' # deny access to all dot files' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location ~ /\. {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' #deny access to store' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location ~ /store {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location ~ /(data|conf|bin|inc)/ {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' location ~ /\.ht {' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
echo '}' >> /etc/nginx/sites-available/$WIKI_DOMAIN_NAME
configure_php
nginx_ensite $WIKI_DOMAIN_NAME
service php5-fpm restart
service nginx restart
# update the dynamic DNS
if [ $WIKI_FREEDNS_SUBDOMAIN_CODE ]; then
if [[ $WIKI_FREEDNS_SUBDOMAIN_CODE != $FREEDNS_SUBDOMAIN_CODE ]]; then
if ! grep -q "$WIKI_DOMAIN_NAME" /usr/bin/dynamicdns; then
echo "# $WIKI_DOMAIN_NAME" >> /usr/bin/dynamicdns
echo "wget -O - https://freedns.afraid.org/dynamic/update.php?$WIKI_FREEDNS_SUBDOMAIN_CODE== >> /dev/null 2>&1" >> /usr/bin/dynamicdns
fi
fi
else
echo 'WARNING: No freeDNS subdomain code given for wiki installation. It is assumed that you are using some other dynamic DNS provider.'
fi
# add some post-install instructions
if ! grep -q "Once you have set up the wiki" /home/$MY_USERNAME/README; then
echo '' >> /home/$MY_USERNAME/README
echo 'Once you have set up the wiki then remove the install file:' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo " rm /var/www/$WIKI_DOMAIN_NAME/htdocs/install.php" >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
fi
echo 'install_wiki' >> $COMPLETION_FILE
}
function install_blog {
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if grep -Fxq "install_blog" $COMPLETION_FILE; then
return
fi
# if this is exclusively a writer setup
if [[ $SYSTEM_TYPE == "$VARIANT_WRITER" ]]; then
WIKI_DOMAIN_NAME=$DOMAIN_NAME
WIKI_FREEDNS_SUBDOMAIN_CODE=$FREEDNS_SUBDOMAIN_CODE
fi
if [ ! $WIKI_DOMAIN_NAME ]; then
return
fi
apt-get -y --force-yes install unzip
# download mnml-blog
cd $INSTALL_DIR
rm -f latest
wget $WIKI_MNML_BLOG_ADDON
if [ ! -f "$INSTALL_DIR/latest" ]; then
echo 'Dokuwiki mnml-blog addon could not be downloaded. Check the Dokuwiki web site and alter WIKI_MNML_BLOG_ADDON at the top of this script as needed.'
exit 21
fi
mv latest $WIKI_MNML_BLOG_ADDON_ARCHIVE
# Check that the mnml-blog download hash is correct
CHECKSUM=$(sha256sum $WIKI_MNML_BLOG_ADDON_ARCHIVE | awk -F ' ' '{print $1}')
if [[ $CHECKSUM != $WIKI_MNML_BLOG_ADDON_HASH ]]; then
echo 'The sha256 hash of the mnml-blog download is incorrect. Possibly the file may have been tampered with. Check the hash on the Dokuwiki mnmlblog web site and alter WIKI_MNML_BLOG_ADDON_HASH if needed.'
echo $CHECKSUM
echo $WIKI_MNML_BLOG_ADDON_HASH
exit 22
fi
# download blogTNG
wget $WIKI_BLOGTNG_ADDON
if [ ! -f "$INSTALL_DIR/master" ]; then
echo 'Dokuwiki blogTNG addon could not be downloaded. Check the Dokuwiki web site and alter WIKI_BLOGTNG_ADDON at the top of this script as needed.'
exit 23
fi
mv master $WIKI_BLOGTNG_ADDON_ARCHIVE
# Check that the blogTNG hash is correct
CHECKSUM=$(sha256sum $WIKI_BLOGTNG_ADDON_ARCHIVE | awk -F ' ' '{print $1}')
if [[ $CHECKSUM != $WIKI_BLOGTNG_ADDON_HASH ]]; then
echo 'The sha256 hash of the blogTNG download is incorrect. Possibly the file may have been tampered with. Check the hash on the Dokuwiki blogTNG web site and alter WIKI_BLOGTNG_ADDON_HASH if needed.'
echo $CHECKSUM
echo $WIKI_BLOGTNG_ADDON_HASH
exit 24
fi
# download dokuwiki sqlite plugin
wget $WIKI_SQLITE_ADDON
if [ ! -f "$INSTALL_DIR/master" ]; then
echo 'Dokuwiki sqlite addon could not be downloaded. Check the Dokuwiki web site and alter WIKI_SQLITE_ADDON at the top of this script as needed.'
exit 25
fi
mv master $WIKI_SQLITE_ADDON_ARCHIVE
# Check that the sqlite plugin hash is correct
CHECKSUM=$(sha256sum $WIKI_SQLITE_ADDON_ARCHIVE | awk -F ' ' '{print $1}')
if [[ $CHECKSUM != $WIKI_SQLITE_ADDON_HASH ]]; then
echo 'The sha256 hash of the Dokuwiki sqlite download is incorrect. Possibly the file may have been tampered with. Check the hash on the Dokuwiki sqlite plugin web site and alter WIKI_SQLITE_ADDON_HASH if needed.'
echo $CHECKSUM
echo $WIKI_SQLITE_ADDON_HASH
exit 26
fi
# install dokuwiki sqlite plugin
tar -xzvf $WIKI_SQLITE_ADDON_ARCHIVE
if [ -d "$INSTALL_DIR/sqlite" ]; then
rm -rf $INSTALL_DIR/sqlite
fi
mv $WIKI_SQLITE_ADDON_NAME sqlite
cp -r sqlite /var/www/$WIKI_DOMAIN_NAME/htdocs/lib/plugins/
# install blogTNG
if [ -d "$INSTALL_DIR/$WIKI_BLOGTNG_ADDON_NAME" ]; then
rm -rf $INSTALL_DIR/$WIKI_BLOGTNG_ADDON_NAME
fi
unzip $WIKI_BLOGTNG_ADDON_ARCHIVE
if [ -d "$INSTALL_DIR/blogtng" ]; then
rm -rf $INSTALL_DIR/blogtng
fi
mv $WIKI_BLOGTNG_ADDON_NAME blogtng
cp -r blogtng /var/www/$WIKI_DOMAIN_NAME/htdocs/lib/plugins/
# install mnml-blog
tar -xzvf $WIKI_MNML_BLOG_ADDON_ARCHIVE
cp -r mnml-blog /var/www/$WIKI_DOMAIN_NAME/htdocs/lib/tpl
cp -r /var/www/$WIKI_DOMAIN_NAME/htdocs/lib/tpl/mnml-blog/blogtng-tpl/* /var/www/$WIKI_DOMAIN_NAME/htdocs/lib/plugins/blogtng/tpl/default/
# make a "freedombone" template so that if the default template gets
# changed after an upgrade to blogTNG this doesn't necessarily change the appearance
cp -r /var/www/$WIKI_DOMAIN_NAME/htdocs/lib/plugins/blogtng/tpl/default /var/www/$WIKI_DOMAIN_NAME/htdocs/lib/plugins/blogtng/tpl/freedombone
if ! grep -q "To set up your blog" /home/$MY_USERNAME/README; then
echo '' >> /home/$MY_USERNAME/README
echo "To set up your blog go to" >> /home/$MY_USERNAME/README
echo "https://$WIKI_DOMAIN_NAME/doku.php?id=start&do=admin&page=config" >> /home/$MY_USERNAME/README
echo 'and set the template to mnml-blog' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo 'To edit things on the right hand sidebar (links, blogroll, etc) go to' >> /home/$MY_USERNAME/README
echo "https://$WIKI_DOMAIN_NAME/doku.php?id=wiki:navigation_sidebar" >> /home/$MY_USERNAME/README
echo 'and edit the page' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo 'To edit things to a header bar (home, contacts, etc) go to' >> /home/$MY_USERNAME/README
echo "https://$WIKI_DOMAIN_NAME/doku.php?id=wiki:navigation_header" >> /home/$MY_USERNAME/README
echo 'and select the "create this page" at the bottom.' >> /home/$MY_USERNAME/README
echo 'You can then add somethething like:' >> /home/$MY_USERNAME/README
echo ' * [[:start|Home]]' >> /home/$MY_USERNAME/README
echo ' * [[:wiki|Wiki]]' >> /home/$MY_USERNAME/README
echo ' * [[:contact|Contact]]' >> /home/$MY_USERNAME/README
echo "Go to https://$WIKI_DOMAIN_NAME/doku.php?id=start&do=admin&page=config" >> /home/$MY_USERNAME/README
echo 'and check "Show header navigation" to ensure that the header shows' >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
fi
echo 'install_blog' >> $COMPLETION_FILE
}
function get_mariadb_password {
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "MariaDB password" /home/$MY_USERNAME/README; then
MARIADB_PASSWORD=$(cat /home/$MY_USERNAME/README | grep "MariaDB password" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
}
function get_mariadb_gnusocial_admin_password {
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "MariaDB gnusocial admin password" /home/$MY_USERNAME/README; then
MICROBLOG_ADMIN_PASSWORD=$(cat /home/$MY_USERNAME/README | grep "MariaDB gnusocial admin password" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
}
function get_mariadb_redmatrix_admin_password {
if [ -f /home/$MY_USERNAME/README ]; then
if grep -q "MariaDB Red Matrix admin password" /home/$MY_USERNAME/README; then
REDMATRIX_ADMIN_PASSWORD=$(cat /home/$MY_USERNAME/README | grep "MariaDB Red Matrix admin password" | awk -F ':' '{print $2}' | sed 's/^ *//')
fi
fi
}
function install_mariadb {
if grep -Fxq "install_mariadb" $COMPLETION_FILE; then
return
fi
apt-get -y --force-yes install python-software-properties debconf-utils
apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 0xcbcb082a1bb943db
add-apt-repository 'deb http://mariadb.biz.net.id//repo/10.1/debian sid main'
apt-get -y --force-yes install software-properties-common
apt-get -y update
get_mariadb_password
if [ ! $MARIADB_PASSWORD ]; then
MARIADB_PASSWORD=$(openssl rand -base64 32)
echo '' >> /home/$MY_USERNAME/README
echo "Your MariaDB password is: $MARIADB_PASSWORD" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
fi
debconf-set-selections <<< "mariadb-server mariadb-server/root_password password $MARIADB_PASSWORD"
debconf-set-selections <<< "mariadb-server mariadb-server/root_password_again password $MARIADB_PASSWORD"
apt-get -y --force-yes install mariadb-server
mysqladmin -u root password "$MARIADB_PASSWORD"
echo 'install_mariadb' >> $COMPLETION_FILE
}
function install_gnu_social {
if grep -Fxq "install_gnu_social" $COMPLETION_FILE; then
return
fi
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
if [ ! $MICROBLOG_DOMAIN_NAME ]; then
return
fi
install_mariadb
get_mariadb_password
apt-get -y --force-yes install php-gettext php5-curl php5-gd php5-mysql git
if [ ! -d /var/www/$MICROBLOG_DOMAIN_NAME ]; then
mkdir /var/www/$MICROBLOG_DOMAIN_NAME
fi
if [ ! -d /var/www/$MICROBLOG_DOMAIN_NAME/htdocs ]; then
mkdir /var/www/$MICROBLOG_DOMAIN_NAME/htdocs
fi
if [ ! -f /var/www/$MICROBLOG_DOMAIN_NAME/htdocs/index.php ]; then
cd $INSTALL_DIR
git clone $MICROBLOG_REPO gnusocial
rm -rf /var/www/$MICROBLOG_DOMAIN_NAME/htdocs
mv gnusocial /var/www/$MICROBLOG_DOMAIN_NAME/htdocs
chmod a+w /var/www/$MICROBLOG_DOMAIN_NAME/htdocs
chown www-data:www-data /var/www/$MICROBLOG_DOMAIN_NAME/htdocs
chmod a+w /var/www/$MICROBLOG_DOMAIN_NAME/htdocs/avatar
chmod a+w /var/www/$MICROBLOG_DOMAIN_NAME/htdocs/background
chmod a+w /var/www/$MICROBLOG_DOMAIN_NAME/htdocs/file
chmod +x /var/www/$MICROBLOG_DOMAIN_NAME/htdocs/scripts/maildaemon.php
fi
get_mariadb_gnusocial_admin_password
if [ ! $MICROBLOG_ADMIN_PASSWORD ]; then
MICROBLOG_ADMIN_PASSWORD=$(openssl rand -base64 32)
echo '' >> /home/$MY_USERNAME/README
echo "Your MariaDB gnusocial admin password is: $MICROBLOG_ADMIN_PASSWORD" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
fi
echo "create database gnusocial;
CREATE USER 'gnusocialadmin'@'localhost' IDENTIFIED BY '$MICROBLOG_ADMIN_PASSWORD';
GRANT ALL PRIVILEGES ON gnusocial.* TO 'gnusocialadmin'@'localhost';
quit" > $INSTALL_DIR/batch.sql
chmod 600 $INSTALL_DIR/batch.sql
mysql -u root --password="$MARIADB_PASSWORD" < $INSTALL_DIR/batch.sql
shred -zu $INSTALL_DIR/batch.sql
if [ ! -f "/etc/aliases" ]; then
touch /etc/aliases
fi
if grep -q "www-data: root" /etc/aliases; then
echo 'www-data: root' >> /etc/aliases
fi
if grep -q "/var/www/$MICROBLOG_DOMAIN_NAME/htdocs/scripts/maildaemon.php" /etc/aliases; then
echo "*: /var/www/$MICROBLOG_DOMAIN_NAME/htdocs/scripts/maildaemon.php" >> /etc/aliases
fi
newaliases
# update the dynamic DNS
if [ $MICROBLOG_FREEDNS_SUBDOMAIN_CODE ]; then
if [[ $MICROBLOG_FREEDNS_SUBDOMAIN_CODE != $FREEDNS_SUBDOMAIN_CODE ]]; then
if ! grep -q "$MICROBLOG_DOMAIN_NAME" /usr/bin/dynamicdns; then
echo "# $MICROBLOG_DOMAIN_NAME" >> /usr/bin/dynamicdns
echo "wget -O - https://freedns.afraid.org/dynamic/update.php?$MICROBLOG_FREEDNS_SUBDOMAIN_CODE== >> /dev/null 2>&1" >> /usr/bin/dynamicdns
fi
fi
else
echo 'WARNING: No freeDNS subdomain code given for microblog. It is assumed that you are using some other dynamic DNS provider.'
fi
echo 'server {' > /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' listen 80;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " server_name $MICROBLOG_DOMAIN_NAME;" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " root /var/www/$MICROBLOG_DOMAIN_NAME/htdocs;" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " error_log /var/www/$MICROBLOG_DOMAIN_NAME/error.log;" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' index index.php;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' rewrite ^ https://$server_name$request_uri? permanent;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '}' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo 'server {' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' listen 443 ssl;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " root /var/www/$MICROBLOG_DOMAIN_NAME/htdocs;" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " server_name $MICROBLOG_DOMAIN_NAME;" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " error_log /var/www/$MICROBLOG_DOMAIN_NAME/error_ssl.log;" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' index index.php;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' charset utf-8;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' client_max_body_size 20m;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' client_body_buffer_size 128k;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' ssl on;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " ssl_certificate /etc/ssl/certs/$MICROBLOG_DOMAIN_NAME.crt;" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " ssl_certificate_key /etc/ssl/private/$MICROBLOG_DOMAIN_NAME.key;" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " ssl_dhparam /etc/ssl/certs/$MICROBLOG_DOMAIN_NAME.dhparam;" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' ssl_session_timeout 5m;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' ssl_prefer_server_ciphers on;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' ssl_session_cache builtin:1000 shared:SSL:10m;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " ssl_protocols $SSL_PROTOCOLS; # not possible to do exclusive" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " ssl_ciphers '$SSL_CIPHERS';" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' add_header X-Frame-Options DENY;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' add_header X-Content-Type-Options nosniff;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' add_header Strict-Transport-Security max-age=15768000;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # rewrite to front controller as default rule' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' location / {' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' rewrite ^/(.*) /index.php?q=$uri&$args last;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " # make sure webfinger and other well known services aren't blocked" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # by denying dot files and rewrite request to the front controller' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' location ^~ /.well-known/ {' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' allow all;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' rewrite ^/(.*) /index.php?q=$uri&$args last;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # statically serve these file types when possible' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # otherwise fall back to front controller' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # allow browser to cache them' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # added .htm for advanced source code editor library' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' location ~* \.(jpg|jpeg|gif|png|ico|css|js|htm|html|ttf|woff|svg)$ {' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' expires 30d;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' try_files $uri /index.php?q=$uri&$args;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # block these file types' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' location ~* \.(tpl|md|tgz|log|out)$ {' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # or a unix socket' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' location ~* \.php$ {' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # Zero-day exploit defense.' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # http://forum.nginx.org/read.php?2,88845,page=3' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " # Won't work properly (404 error) if the file is not stored on this" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " # server, which is entirely possible with php-fpm/php-fcgi." >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " # Comment the 'try_files' line out if you set up php-fpm/php-fcgi on" >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo " # another machine. And then cross your fingers that you won't get hacked." >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' try_files $uri $uri/ /index.php;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' fastcgi_split_path_info ^(.+\.php)(/.+)$;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # With php5-cgi alone:' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # fastcgi_pass 127.0.0.1:9000;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # With php5-fpm:' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' fastcgi_pass unix:/var/run/php5-fpm.sock;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' include fastcgi_params;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' fastcgi_index index.php;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' # deny access to all dot files' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' location ~ /\. {' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' location ~ /\.ht {' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
echo '}' >> /etc/nginx/sites-available/$MICROBLOG_DOMAIN_NAME
configure_php
if [ ! -f /etc/ssl/private/$MICROBLOG_DOMAIN_NAME.key ]; then
makecert $MICROBLOG_DOMAIN_NAME
fi
nginx_ensite $MICROBLOG_DOMAIN_NAME
service php5-fpm restart
service nginx restart
# some post-install instructions for the user
if ! grep -q "To set up your microblog" /home/$MY_USERNAME/README; then
echo '' >> /home/$MY_USERNAME/README
echo "To set up your microblog go to" >> /home/$MY_USERNAME/README
echo "https://$MICROBLOG_DOMAIN_NAME/install.php" >> /home/$MY_USERNAME/README
echo 'and enter the following settings:' >> /home/$MY_USERNAME/README
echo ' - Set a name for the site' >> /home/$MY_USERNAME/README
echo ' - Server SSL: enable' >> /home/$MY_USERNAME/README
echo ' - Hostname: localhost' >> /home/$MY_USERNAME/README
echo ' - Type: MySql/MariaDB' >> /home/$MY_USERNAME/README
echo ' - Name: gnusocial' >> /home/$MY_USERNAME/README
echo ' - DB username: gnusocialadmin' >> /home/$MY_USERNAME/README
echo " - DB Password; $MICROBLOG_ADMIN_PASSWORD" >> /home/$MY_USERNAME/README
echo " - Administrator nickname: $MY_USERNAME" >> /home/$MY_USERNAME/README
echo " - Administrator password: $MICROBLOG_ADMIN_PASSWORD" >> /home/$MY_USERNAME/README
echo ' - Subscribe to announcements: ticked' >> /home/$MY_USERNAME/README
echo ' - Site profile: Community' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo "Navigate to https://$MICROBLOG_DOMAIN_NAME and you can then " >> /home/$MY_USERNAME/README
echo 'complete the configuration via the *Admin* section on the header' >> /home/$MY_USERNAME/README
echo 'bar. Some recommended admin settings are:' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo 'Under the *Site* settings:' >> /home/$MY_USERNAME/README
echo ' Text limit: 140' >> /home/$MY_USERNAME/README
echo ' Dupe Limit: 60000' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo 'Under the *User* settings:' >> /home/$MY_USERNAME/README
echo ' Bio limit: 1000' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo 'Under the *Access* settings:' >> /home/$MY_USERNAME/README
echo ' /Invite only/ ticked' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
fi
echo 'install_gnu_social' >> $COMPLETION_FILE
}
function install_redmatrix {
if grep -Fxq "install_redmatrix" $COMPLETION_FILE; then
return
fi
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
return
fi
# if this is exclusively a writer setup
if [[ $SYSTEM_TYPE == "$VARIANT_SOCIAL" ]]; then
REDMATRIX_DOMAIN_NAME=$DOMAIN_NAME
REDMATRIX_FREEDNS_SUBDOMAIN_CODE=$FREEDNS_SUBDOMAIN_CODE
fi
if [ ! $REDMATRIX_DOMAIN_NAME ]; then
return
fi
install_mariadb
get_mariadb_password
apt-get -y --force-yes install php5-common php5-cli php5-curl php5-gd php5-mysql php5-mcrypt git git
if [ ! -d /var/www/$REDMATRIX_DOMAIN_NAME ]; then
mkdir /var/www/$REDMATRIX_DOMAIN_NAME
fi
if [ ! -d /var/www/$REDMATRIX_DOMAIN_NAME/htdocs ]; then
mkdir /var/www/$REDMATRIX_DOMAIN_NAME/htdocs
fi
if [ ! -f /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/index.php ]; then
cd $INSTALL_DIR
git clone $REDMATRIX_REPO redmatrix
rm -rf /var/www/$REDMATRIX_DOMAIN_NAME/htdocs
mv redmatrix /var/www/$REDMATRIX_DOMAIN_NAME/htdocs
chown -R www-data:www-data /var/www/$REDMATRIX_DOMAIN_NAME/htdocs
git clone $REDMATRIX_ADDONS_REPO /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/addon
fi
get_mariadb_redmatrix_admin_password
if [ ! $REDMATRIX_ADMIN_PASSWORD ]; then
REDMATRIX_ADMIN_PASSWORD=$(openssl rand -base64 32)
echo '' >> /home/$MY_USERNAME/README
echo "Your MariaDB Red Matrix admin password is: $REDMATRIX_ADMIN_PASSWORD" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
fi
echo "create database redmatrix;
CREATE USER 'redmatrixadmin'@'localhost' IDENTIFIED BY '$REDMATRIX_ADMIN_PASSWORD';
GRANT ALL PRIVILEGES ON redmatrix.* TO 'redmatrixadmin'@'localhost';
quit" > $INSTALL_DIR/batch.sql
chmod 600 $INSTALL_DIR/batch.sql
mysql -u root --password="$MARIADB_PASSWORD" < $INSTALL_DIR/batch.sql
shred -zu $INSTALL_DIR/batch.sql
if ! grep -q "/var/www/$REDMATRIX_DOMAIN_NAME/htdocs" /etc/crontab; then
echo "12,22,32,42,52 * * * * root cd /var/www/$REDMATRIX_DOMAIN_NAME/htdocs; /usr/bin/timeout 240 /usr/bin/php include/poller.php" >> /etc/crontab
fi
# update the dynamic DNS
if [ $REDMATRIX_FREEDNS_SUBDOMAIN_CODE ]; then
if [[ $REDMATRIX_FREEDNS_SUBDOMAIN_CODE != $FREEDNS_SUBDOMAIN_CODE ]]; then
if ! grep -q "$REDMATRIX_DOMAIN_NAME" /usr/bin/dynamicdns; then
echo "# $REDMATRIX_DOMAIN_NAME" >> /usr/bin/dynamicdns
echo "wget -O - https://freedns.afraid.org/dynamic/update.php?$REDMATRIX_FREEDNS_SUBDOMAIN_CODE== >> /dev/null 2>&1" >> /usr/bin/dynamicdns
fi
fi
else
echo 'WARNING: No freeDNS code given for Red Matrix. It is assumed that you are using some other dynamic DNS provider.'
fi
echo 'server {' > /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' listen 80;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " server_name $REDMATRIX_DOMAIN_NAME;" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " root /var/www/$REDMATRIX_DOMAIN_NAME/htdocs;" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " error_log /var/www/$REDMATRIX_DOMAIN_NAME/error.log;" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' index index.php;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' rewrite ^ https://$server_name$request_uri? permanent;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '}' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo 'server {' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' listen 443 ssl;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " root /var/www/$REDMATRIX_DOMAIN_NAME/htdocs;" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " server_name $REDMATRIX_DOMAIN_NAME;" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " error_log /var/www/$REDMATRIX_DOMAIN_NAME/error_ssl.log;" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' index index.php;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' charset utf-8;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' client_max_body_size 20m;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' client_body_buffer_size 128k;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' ssl on;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " ssl_certificate /etc/ssl/certs/$REDMATRIX_DOMAIN_NAME.crt;" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " ssl_certificate_key /etc/ssl/private/$REDMATRIX_DOMAIN_NAME.key;" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " ssl_dhparam /etc/ssl/certs/$REDMATRIX_DOMAIN_NAME.dhparam;" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' ssl_session_timeout 5m;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' ssl_prefer_server_ciphers on;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' ssl_session_cache builtin:1000 shared:SSL:10m;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " ssl_protocols $SSL_PROTOCOLS; # not possible to do exclusive" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " ssl_ciphers '$SSL_CIPHERS';" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' add_header X-Frame-Options DENY;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' add_header X-Content-Type-Options nosniff;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' add_header Strict-Transport-Security max-age=15768000;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # rewrite to front controller as default rule' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' location / {' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' rewrite ^/(.*) /index.php?q=$uri&$args last;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " # make sure webfinger and other well known services aren't blocked" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # by denying dot files and rewrite request to the front controller' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' location ^~ /.well-known/ {' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' allow all;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' rewrite ^/(.*) /index.php?q=$uri&$args last;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # statically serve these file types when possible' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # otherwise fall back to front controller' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # allow browser to cache them' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # added .htm for advanced source code editor library' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' location ~* \.(jpg|jpeg|gif|png|ico|css|js|htm|html|ttf|woff|svg)$ {' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' expires 30d;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' try_files $uri /index.php?q=$uri&$args;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # block these file types' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' location ~* \.(tpl|md|tgz|log|out)$ {' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # or a unix socket' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' location ~* \.php$ {' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # Zero-day exploit defense.' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # http://forum.nginx.org/read.php?2,88845,page=3' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " # Won't work properly (404 error) if the file is not stored on this" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " # server, which is entirely possible with php-fpm/php-fcgi." >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " # Comment the 'try_files' line out if you set up php-fpm/php-fcgi on" >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo " # another machine. And then cross your fingers that you won't get hacked." >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' try_files $uri $uri/ /index.php;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' fastcgi_split_path_info ^(.+\.php)(/.+)$;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # With php5-cgi alone:' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # fastcgi_pass 127.0.0.1:9000;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # With php5-fpm:' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' fastcgi_pass unix:/var/run/php5-fpm.sock;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' include fastcgi_params;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' fastcgi_index index.php;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' fastcgi_read_timeout 300;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' # deny access to all dot files' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' location ~ /\. {' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' location ~ /\.ht {' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' deny all;' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo ' }' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
echo '}' >> /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME
configure_php
if [ ! -f /etc/ssl/private/$REDMATRIX_DOMAIN_NAME.key ]; then
makecert $REDMATRIX_DOMAIN_NAME
fi
if [ ! -d /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/view/tpl/smarty3 ]; then
mkdir /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/view/tpl/smarty3
fi
if [ ! -d /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/store/[data] ]; then
mkdir /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/store/[data]
fi
if [ ! -d /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/store/[data]/smarty3 ]; then
mkdir /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/store/[data]/smarty3
chmod 777 /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/store/[data]/smarty3
fi
chmod 777 /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/view/tpl
chmod 777 /var/www/$REDMATRIX_DOMAIN_NAME/htdocs/view/tpl/smarty3
nginx_ensite $REDMATRIX_DOMAIN_NAME
service php5-fpm restart
service nginx restart
service cron restart
# some post-install instructions for the user
if ! grep -q "To set up your Red Matrix" /home/$MY_USERNAME/README; then
echo '' >> /home/$MY_USERNAME/README
echo "To set up your Red Matrix site go to" >> /home/$MY_USERNAME/README
echo "https://$REDMATRIX_DOMAIN_NAME" >> /home/$MY_USERNAME/README
echo 'You will need to have a non self-signed SSL certificate in order' >> /home/$MY_USERNAME/README
echo "to use Red Matrix. Put the public certificate in /etc/ssl/certs/$REDMATRIX_DOMAIN_NAME.crt" >> /home/$MY_USERNAME/README
echo "and the private certificate in /etc/ssl/private/$REDMATRIX_DOMAIN_NAME.key." >> /home/$MY_USERNAME/README
echo 'If there is an intermediate certificate needed (such as with StartSSL) then' >> /home/$MY_USERNAME/README
echo 'this will need to be concatenated onto the end of the crt file, like this:' >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo " cat /etc/ssl/certs/$REDMATRIX_DOMAIN_NAME.crt /etc/ssl/chains/startssl-sub.class1.server.ca.pem > /etc/ssl/certs/$REDMATRIX_DOMAIN_NAME.bundle.crt" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
echo "Then change ssl_certificate to /etc/ssl/certs/$REDMATRIX_DOMAIN_NAME.bundle.crt" >> /home/$MY_USERNAME/README
echo "within /etc/nginx/sites-available/$REDMATRIX_DOMAIN_NAME" >> /home/$MY_USERNAME/README
echo '' >> /home/$MY_USERNAME/README
chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/README
fi
echo 'install_redmatrix' >> $COMPLETION_FILE
}
function install_mediagoblin {
if grep -Fxq "install_mediagoblin" $COMPLETION_FILE; then
return
fi
if [[ $SYSTEM_TYPE == "$VARIANT_CLOUD" || $SYSTEM_TYPE == "$VARIANT_MAILBOX" || $SYSTEM_TYPE == "$VARIANT_CHAT" || $SYSTEM_TYPE == "$VARIANT_WRITER" || $SYSTEM_TYPE == "$VARIANT_SOCIAL" ]]; then
return
fi
# if this is exclusively a writer setup
if [[ $SYSTEM_TYPE == "$VARIANT_MEDIA" ]]; then
MEDIAGOBLIN_DOMAIN_NAME=$DOMAIN_NAME
MEDIAGOBLIN_FREEDNS_SUBDOMAIN_CODE=$FREEDNS_SUBDOMAIN_CODE
fi
if [ ! $MEDIAGOBLIN_DOMAIN_NAME ]; then
return
fi
apt-get -y --force-yes install git-core python python-dev python-lxml python-imaging python-virtualenv
apt-get -y --force-yes install python-gst-1.0 libjpeg8-dev sqlite3 libapache2-mod-fcgid gstreamer1.0-plugins-base gstreamer1.0-plugins-bad gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly gstreamer1.0-libav python-numpy python-scipy libsndfile1-dev
apt-get -y --force-yes install postgresql postgresql-client python-psycopg2
sudo -u postgres createuser -A -D mediagoblin
sudo -u postgres createdb -E UNICODE -O mediagoblin mediagoblin
adduser --system mediagoblin
if [ ! -d /srv/$MEDIAGOBLIN_DOMAIN_NAME ]; then
mkdir -p /srv/$MEDIAGOBLIN_DOMAIN_NAME
fi
chown -hR mediagoblin: /srv/$MEDIAGOBLIN_DOMAIN_NAME
cd /srv/$MEDIAGOBLIN_DOMAIN_NAME
su -c "git clone git://gitorious.org/mediagoblin/mediagoblin.git /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin" - mediagoblin
su -c "cd /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin; git submodule init" - mediagoblin
su -c "cd /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin; git submodule update" - mediagoblin
su -c "cd /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin; virtualenv --system-site-packages ." - mediagoblin
#su -c "cd /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin; ./bin/python setup.py develop" - mediagoblin
su -c "cd /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin; ./bin/easy_install flup" - mediagoblin
su -c "cp /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin.ini /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini" - mediagoblin
su -c "cp /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/paste.ini /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/paste_local.ini" - mediagoblin
# update the dynamic DNS
if [ $MEDIAGOBLIN_FREEDNS_SUBDOMAIN_CODE ]; then
if [[ $MEDIAGOBLIN_FREEDNS_SUBDOMAIN_CODE != $FREEDNS_SUBDOMAIN_CODE ]]; then
if ! grep -q "$MEDIAGOBLIN_DOMAIN_NAME" /usr/bin/dynamicdns; then
echo "# $MEDIAGOBLIN_DOMAIN_NAME" >> /usr/bin/dynamicdns
echo "wget -O - https://freedns.afraid.org/dynamic/update.php?$MEDIAGOBLIN_FREEDNS_SUBDOMAIN_CODE== >> /dev/null 2>&1" >> /usr/bin/dynamicdns
fi
fi
else
echo 'WARNING: No freeDNS subdomain code given for mediagoblin. It is assumed that you are using some other dynamic DNS provider.'
fi
echo 'server {' > /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' #################################################' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # Stock useful config options, but ignore them :)' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' #################################################' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' include /etc/nginx/mime.types;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' autoindex off;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' default_type application/octet-stream;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' sendfile on;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # Gzip' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' gzip on;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' gzip_min_length 1024;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' gzip_buffers 4 32k;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' gzip_types text/plain text/html application/x-javascript text/javascript text/xml text/css;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' #####################################' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # Mounting MediaGoblin stuff' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # This is the section you should read' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' #####################################' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # Change this to update the upload size limit for your users' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' client_max_body_size 8m;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # prevent attacks (someone uploading a .txt file that the browser' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # interprets as an HTML file, etc.)' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' add_header X-Content-Type-Options nosniff;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " server_name $MEDIAGOBLIN_DOMAIN_NAME;" >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " access_log /var/log/nginx/$MEDIAGOBLIN_DOMAIN_NAME.access.log;" >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " error_log /var/log/nginx/$MEDIAGOBLIN_DOMAIN_NAME.error.log;" >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " # MediaGoblin's stock static files: CSS, JS, etc." >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' location /mgoblin_static/ {' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " alias /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin/static/;" >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' }' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # Instance specific media:' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' location /mgoblin_media/ {' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " alias /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/user_dev/media/public/;" >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' }' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # Theme static files (usually symlinked in)' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' location /theme_static/ {' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " alias /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/user_dev/theme_static/;" >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' }' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # Plugin static files (usually symlinked in)' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' location /plugin_static/ {' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " alias /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/user_dev/plugin_static/;" >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' }' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' # Mounting MediaGoblin itself via FastCGI.' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' location / {' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' fastcgi_pass 127.0.0.1:26543;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' include /etc/nginx/fastcgi_params;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " # our understanding vs nginx's handling of script_name vs" >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo " # path_info don't match :)" >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' fastcgi_param PATH_INFO $fastcgi_script_name;' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' fastcgi_param SCRIPT_NAME "";' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo ' }' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
echo '}' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf
ln -s /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf /etc/nginx/conf.d/
ln -s /srv/$MEDIAGOBLIN_DOMAIN_NAME/nginx.conf /etc/nginx/sites-enabled/
sed -i "s/notice@mediagoblin.example.org/$MY_USERNAME@$DOMAIN_NAME/g" /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini
sed -i 's/email_debug_mode = true/email_debug_mode = false/g' /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini
sed -i 's|# sql_engine = postgresql:///mediagoblin|sql_engine = postgresql:///mediagoblin|g' /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini
if grep -q "media_types.audio" /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini; then
echo '[[mediagoblin.media_types.audio]]' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini
fi
if grep -q "media_types.video" /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini; then
echo '[[mediagoblin.media_types.video]]' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini
fi
if grep -q "media_types.stl" /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini; then
echo '[[mediagoblin.media_types.stl]]' >> /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin_local.ini
fi
su -c "cd /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin; ./bin/pip install scikits.audiolab" - mediagoblin
su -c "cd /srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin/mediagoblin; ./bin/gmg dbupdate" - mediagoblin
# create an init script
echo '#!/bin/bash' > /etc/init.d/mediagoblin
echo '# /etc/init.d/mediagoblin' >> /etc/init.d/mediagoblin
echo '' >> /etc/init.d/mediagoblin
echo '### BEGIN INIT INFO' >> /etc/init.d/mediagoblin
echo '# Provides: mediagoblin' >> /etc/init.d/mediagoblin
echo '# Required-Start: $remote_fs $syslog' >> /etc/init.d/mediagoblin
echo '# Required-Stop: $remote_fs $syslog' >> /etc/init.d/mediagoblin
echo '# Default-Start: 2 3 4 5' >> /etc/init.d/mediagoblin
echo '# Default-Stop: 0 1 6' >> /etc/init.d/mediagoblin
echo '# Short-Description: starts mediagoblin' >> /etc/init.d/mediagoblin
echo '# Description: Other methods may work, but I found this the easiest' >> /etc/init.d/mediagoblin
echo '### END INIT INFO' >> /etc/init.d/mediagoblin
echo '' >> /etc/init.d/mediagoblin
echo '# Author: Bob Mottram <bob@robotics.uk.to>' >> /etc/init.d/mediagoblin
echo '' >> /etc/init.d/mediagoblin
echo '#Settings' >> /etc/init.d/mediagoblin
echo "SERVICE='mediagoblin'" >> /etc/init.d/mediagoblin
echo "LOGFILE='/srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin.log'" >> /etc/init.d/mediagoblin
echo 'COMMAND="./lazyserver.sh > $LOGFILE"' >> /etc/init.d/mediagoblin
echo "USERNAME='mediagoblin'" >> /etc/init.d/mediagoblin
echo 'NICELEVEL=15 # from 0-19 the bigger the number, the less the impact on system resources' >> /etc/init.d/mediagoblin
echo 'HISTORY=1024' >> /etc/init.d/mediagoblin
echo "MG_LOCATION='/srv/$MEDIAGOBLIN_DOMAIN_NAME/mediagoblin'" >> /etc/init.d/mediagoblin
echo 'INVOCATION="nice -n ${NICELEVEL} ${COMMAND}"' >> /etc/init.d/mediagoblin
echo "PATH='/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/core_perl:/sbin:/usr/sbin:/bin'" >> /etc/init.d/mediagoblin
echo '' >> /etc/init.d/mediagoblin
echo 'mg_start() {' >> /etc/init.d/mediagoblin
echo ' echo "Starting $SERVICE..."' >> /etc/init.d/mediagoblin
echo ' cd ${MG_LOCATION}' >> /etc/init.d/mediagoblin
echo ' su --command "screen -h ${HISTORY} -dmS ${SERVICE} ${INVOCATION}" $USERNAME' >> /etc/init.d/mediagoblin
echo '}' >> /etc/init.d/mediagoblin
echo '' >> /etc/init.d/mediagoblin
echo 'mg_stop() {' >> /etc/init.d/mediagoblin
echo ' echo "Stopping $SERVICE"' >> /etc/init.d/mediagoblin
echo ' su --command "screen -p 0 -S ${SERVICE} -X stuff "'"'"^C"'"'"" $USERNAME' >> /etc/init.d/mediagoblin
echo '}' >> /etc/init.d/mediagoblin
echo '' >> /etc/init.d/mediagoblin
echo '#Start-Stop here' >> /etc/init.d/mediagoblin
echo 'case "$1" in' >> /etc/init.d/mediagoblin
echo ' start)' >> /etc/init.d/mediagoblin
echo ' mg_start' >> /etc/init.d/mediagoblin
echo ' ;;' >> /etc/init.d/mediagoblin
echo ' stop)' >> /etc/init.d/mediagoblin
echo ' mg_stop' >> /etc/init.d/mediagoblin
echo ' ;;' >> /etc/init.d/mediagoblin
echo ' restart)' >> /etc/init.d/mediagoblin
echo ' mg_stop' >> /etc/init.d/mediagoblin
echo ' sleep 10s' >> /etc/init.d/mediagoblin
echo ' mg_start' >> /etc/init.d/mediagoblin
echo ' ;;' >> /etc/init.d/mediagoblin
echo ' *)' >> /etc/init.d/mediagoblin
echo ' echo "Usage: $0 {start|stop|restart}"' >> /etc/init.d/mediagoblin
echo ' exit 1' >> /etc/init.d/mediagoblin
echo ' ;;' >> /etc/init.d/mediagoblin
echo 'esac' >> /etc/init.d/mediagoblin
echo '' >> /etc/init.d/mediagoblin
echo 'exit 0' >> /etc/init.d/mediagoblin
/etc/init.d/nginx restart
chmod +x /etc/init.d/mediagoblin
update-rc.d mediagoblin defaults
service mediagoblin start
echo 'install_mediagoblin' >> $COMPLETION_FILE
}
function install_final {
if grep -Fxq "install_final" $COMPLETION_FILE; then
return
fi
# unmount any attached usb drive
if [ -d /media/usb ]; then
umount /media/usb
rm -rf /media/usb
fi
apt-get -y --force-yes autoremove
echo 'install_final' >> $COMPLETION_FILE
echo ''
echo ' *** Freedombone installation is complete. Rebooting... ***'
echo ''
if [ -f "/home/$MY_USERNAME/README" ]; then
echo "See /home/$MY_USERNAME/README for post-installation instructions."
echo ''
fi
reboot
}
argument_checks
configure_firewall
configure_firewall_for_ssh
configure_firewall_for_dns
configure_firewall_for_ftp
configure_firewall_for_web_access
remove_proprietary_repos
change_debian_repos
enable_backports
configure_dns
initial_setup
install_editor
change_login_message
update_the_kernel
enable_zram
random_number_generator
set_your_domain_name
time_synchronisation
configure_internet_protocol
configure_ssh
search_for_attached_usb_drive
regenerate_ssh_keys
script_to_make_self_signed_certificates
configure_email
#spam_filtering
configure_imap
configure_gpg
email_client
configure_firewall_for_email
folders_for_mailing_lists
folders_for_email_addresses
dynamic_dns_freedns
#create_private_mailing_list
import_email
install_web_server
configure_firewall_for_web_server
install_owncloud
install_xmpp
configure_firewall_for_xmpp
install_irc_server
configure_firewall_for_irc
install_wiki
install_blog
install_gnu_social
install_redmatrix
install_mediagoblin
install_final
echo 'Freedombone installation is complete'
exit 0
Reference in New Issue View Git Blame Copy Permalink