freedomboneeee/src/freedombone-mesh-batman

386 lines
12 KiB
Bash
Executable File

#!/bin/bash
#
# .---. . .
# | | |
# |--- .--. .-. .-. .-.| .-. .--.--. |.-. .-. .--. .-.
# | | (.-' (.-' ( | ( )| | | | )( )| | (.-'
# ' ' --' --' -' - -' ' ' -' -' -' ' - --'
#
# Freedom in the Cloud
#
# Used to enable or disable batman mesh protocol on wlanX
#
# License
# =======
#
# Copyright (C) 2015-2016 Bob Mottram <bob@freedombone.net>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU Affero General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU Affero General Public License for more details.
#
# You should have received a copy of the GNU Affero General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
PROJECT_NAME='freedombone'
COMPLETION_FILE=/root/${PROJECT_NAME}-completed.txt
HOTSPOT_PASSPHRASE='mesh'
source /usr/share/${PROJECT_NAME}/utils/${PROJECT_NAME}-utils-wifi
if [[ $1 == "start" ]]; then
# install avahi
sed -i "s|#host-name=.*|host-name=$(hostname)|g" /etc/avahi/avahi-daemon.conf
sed -i "s|host-name=.*|host-name=$(hostname)|g" /etc/avahi/avahi-daemon.conf
sed -i "s|use-ipv4=.*|use-ipv4=yes|g" /etc/avahi/avahi-daemon.conf
sed -i "s|use-ipv6=.*|use-ipv6=no|g" /etc/avahi/avahi-daemon.conf
sed -i "s|#disallow-other-stacks=.*|disallow-other-stacks=yes|g" /etc/avahi/avahi-daemon.conf
sed -i "s|hosts:.*|hosts: files mdns4_minimal dns mdns4 mdns|g" /etc/nsswitch.conf
fi
# Mesh definition
WIFI_SSID='mesh'
if [ -f $COMPLETION_FILE ]; then
if grep -q "WIFI_SSID:" $COMPLETION_FILE; then
WIFI_SSID=$(cat $COMPLETION_FILE | grep "WIFI_SSID:" | awk -F ':' '{print $2}')
fi
sed -i "s|WIFI_SSID:.*|WIFI_SSID:${WIFI_SSID}|g" $COMPLETION_FILE
fi
CELLID='any'
CHANNEL=2
HOTSPOT_CHANNEL=6
if [ -f $COMPLETION_FILE ]; then
if grep -q "Wifi channel:" $COMPLETION_FILE; then
CHANNEL=$(cat $COMPLETION_FILE | grep "Wifi channel:" | awk -F ':' '{print $2}')
fi
sed -i "s|Wifi channel:.*|Wifi channel:${CHANNEL}|g" $COMPLETION_FILE
fi
ZERONET_PORT=15441
IPFS_PORT=4001
TOX_PORT=33445
TRACKER_PORT=6969
LIBREVAULT_PORT=42345
TAHOELAFS_PORT=50213
# Ethernet bridge definition (bridged to bat0)
BRIDGE=br-mesh
BRIDGE_HOTSPOT=br-hotspot
IFACE=
IFACE_SECONDARY=
EIFACE=eth0
WLAN_ADAPTORS=$(count_wlan)
if [ $WLAN_ADAPTORS -eq 0 ]; then
echo $'No wlan adaptors found'
exit 0
fi
update_wifi_adaptors
if [ ! $IFACE ]; then
echo $'No wlan adaptor'
exit 0
fi
if [ -e /etc/default/batctl ]; then
. /etc/default/batctl
fi
function global_rate_limit {
if ! grep -q "tcp_challenge_ack_limit" /etc/sysctl.conf; then
echo 'net.ipv4.tcp_challenge_ack_limit = 999999999' >> /etc/sysctl.conf
else
sed -i 's|net.ipv4.tcp_challenge_ack_limit.*|net.ipv4.tcp_challenge_ack_limit = 999999999|g' /etc/sysctl.conf
fi
sysctl -p -q
}
function status {
batctl o
}
function stop {
if [ -z "$IFACE" ]; then
echo 'error: unable to find wifi interface, not enabling batman-adv mesh'
return
fi
if [ "$EIFACE" ]; then
brctl delif $BRIDGE bat0
brctl delif $BRIDGE $EIFACE
ifconfig $BRIDGE down || true
brctl delbr $BRIDGE
ifconfig $EIFACE down -promisc
fi
if [ $IFACE_SECONDARY ]; then
systemctl stop hostapd
brctl delif $BRIDGE_HOTSPOT bat0
ifconfig $BRIDGE_HOTSPOT down || true
brctl delbr $BRIDGE_HOTSPOT
fi
avahi-autoipd -k $BRIDGE
avahi-autoipd -k $IFACE
ifconfig bat0 down -promisc
batctl if del $IFACE
rmmod batman-adv
ifconfig $IFACE mtu 1500
ifconfig $IFACE down
iwconfig $IFACE mode managed
iptables -D INPUT -p tcp --dport $TRACKER_PORT -j ACCEPT
iptables -D INPUT -p udp --dport $TRACKER_PORT -j ACCEPT
iptables -D INPUT -p tcp --dport 80 -j ACCEPT
iptables -D INPUT -p udp --dport 80 -j ACCEPT
iptables -D INPUT -p tcp --dport 548 -j ACCEPT
iptables -D INPUT -p udp --dport 548 -j ACCEPT
iptables -D INPUT -p tcp --dport 5353 -j ACCEPT
iptables -D INPUT -p udp --dport 5353 -j ACCEPT
iptables -D INPUT -p tcp --dport 5354 -j ACCEPT
iptables -D INPUT -p udp --dport 5354 -j ACCEPT
iptables -D INPUT -p tcp --dport $ZERONET_PORT -j ACCEPT
iptables -D INPUT -p udp --dport $ZERONET_PORT -j ACCEPT
iptables -D INPUT -p tcp --dport $IPFS_PORT -j ACCEPT
iptables -D INPUT -p udp --dport $IPFS_PORT -j ACCEPT
iptables -D INPUT -p tcp --dport $TOX_PORT -j ACCEPT
iptables -D INPUT -p udp --dport $TOX_PORT -j ACCEPT
iptables -D INPUT -p tcp --dport $LIBREVAULT_PORT -j ACCEPT
iptables -D INPUT -p udp --dport $LIBREVAULT_PORT -j ACCEPT
iptables -D INPUT -p tcp --dport $TAHOELAFS_PORT -j ACCEPT
# SSB/Patchwork
iptables -D INPUT -p udp --dport 8008 -j ACCEPT
iptables -D INPUT -p tcp --dport 8008 -j ACCEPT
systemctl restart network-manager
}
function verify {
tempfile="$(mktemp)"
batctl o > $tempfile
if grep -q "disabled" $tempfile; then
echo $'B.A.T.M.A.N. not enabled'
rm $tempfile
stop
exit 726835
fi
echo $'B.A.T.M.A.N. is running'
rm $tempfile
}
function assign_peer_address {
for i in {1..6}; do
number=$RANDOM
let "number %= 255"
octet=$(echo "obase=16;$number" | bc)
if [ ${#octet} -lt 2 ]; then
octet="0${octet}"
fi
if [ $i -gt 1 ]; then
echo -n ":"
fi
echo -n "${octet}"
done
echo ''
}
function start {
if [ -z "$IFACE" ] ; then
echo 'error: unable to find wifi interface, not enabling batman-adv mesh'
exit 723657
fi
echo "info: enabling batman-adv mesh network $WIFI_SSID on $IFACE"
systemctl stop network-manager
sleep 5
# remove an avahi service which isn't used
if [ -f /etc/avahi/services/udisks.service ]; then
sudo rm /etc/avahi/services/udisks.service
fi
global_rate_limit
# Might have to re-enable wifi
rfkill unblock $(rfkill list|awk -F: "/phy/ {print $1}") || true
ifconfig $IFACE down
ifconfig $IFACE mtu 1532
ifconfig $IFACE hw ether $(assign_peer_address)
iwconfig $IFACE enc off
iwconfig $IFACE mode ad-hoc essid $WIFI_SSID channel $CHANNEL
sleep 1
iwconfig $IFACE ap $CELLID
modprobe batman-adv
batctl if add $IFACE
ifconfig $IFACE up
avahi-autoipd --force-bind --daemonize --wait $IFACE
ifconfig bat0 up promisc
#Use persistent HWAddr
ether_new=$(ifconfig eth0 | grep HWaddr | sed -e "s/.*HWaddr //")
if [ ! -f /var/lib/mesh-node/bat0 ]; then
mkdir /var/lib/mesh-node
echo "${ether_new}" > /var/lib/mesh-node/bat0
else
ether=$(cat /var/lib/mesh-node/bat0)
ifconfig bat0 hw ether ${ether}
fi
if [ "$EIFACE" ] ; then
brctl addbr $BRIDGE
brctl addif $BRIDGE bat0
brctl addif $BRIDGE $EIFACE
ifconfig bat0 0.0.0.0
ifconfig $EIFACE 0.0.0.0
ifconfig $EIFACE up promisc
ifconfig $BRIDGE up
avahi-autoipd --force-bind --daemonize --wait $BRIDGE
fi
if [ $IFACE_SECONDARY ]; then
if [[ $IFACE != $IFACE_SECONDARY ]]; then
if [ -d /etc/hostapd ]; then
# bridge between mesh and wifi hotspot for mobile
HOTSPOT_NAME=$"${WIFI_SSID}-hotspot"
ifconfig $IFACE_SECONDARY down
ifconfig $IFACE_SECONDARY mtu 1500
ifconfig $IFACE_SECONDARY hw ether $(assign_peer_address)
iwconfig $IFACE_SECONDARY enc open
iwconfig $IFACE_SECONDARY mode managed essid $HOTSPOT_NAME channel ${HOTSPOT_CHANNEL}
iwconfig $IFACE_SECONDARY ap $CELLID
brctl addbr $BRIDGE_HOTSPOT
brctl addif $BRIDGE_HOTSPOT bat0
brctl addif $BRIDGE_HOTSPOT $IFACE_SECONDARY
ifconfig bat0 0.0.0.0
ifconfig $IFACE_SECONDARY 0.0.0.0
sed -i 's|#DAEMON_CONF=.*|DAEMON_CONF="/etc/hostapd/hostapd.conf"|g' /etc/default/hostapd
echo "interface=${IFACE_SECONDARY}" > /etc/hostapd/hostapd.conf
echo "bridge=${BRIDGE_HOTSPOT}" >> /etc/hostapd/hostapd.conf
echo 'driver=nl80211' >> /etc/hostapd/hostapd.conf
echo "country_code=UK" >> /etc/hostapd/hostapd.conf
echo "ssid=$HOTSPOT_NAME" >> /etc/hostapd/hostapd.conf
echo 'hw_mode=g' >> /etc/hostapd/hostapd.conf
echo "channel=${HOTSPOT_CHANNEL}" >> /etc/hostapd/hostapd.conf
echo 'wpa=2' >> /etc/hostapd/hostapd.conf
echo "wpa_passphrase=$HOTSPOT_PASSPHRASE" >> /etc/hostapd/hostapd.conf
echo 'wpa_key_mgmt=WPA-PSK' >> /etc/hostapd/hostapd.conf
echo 'wpa_pairwise=TKIP' >> /etc/hostapd/hostapd.conf
echo 'rsn_pairwise=CCMP' >> /etc/hostapd/hostapd.conf
echo 'auth_algs=1' >> /etc/hostapd/hostapd.conf
echo 'macaddr_acl=0' >> /etc/hostapd/hostapd.conf
ifconfig $BRIDGE_HOTSPOT up
avahi-autoipd --force-bind --daemonize --wait $BRIDGE_HOTSPOT
ifconfig $IFACE_SECONDARY up promisc
#ifconfig $IFACE_SECONDARY auto-dhcp start
systemctl start hostapd
fi
fi
fi
iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT
iptables -A OUTPUT -p icmp --icmp-type echo-reply -j ACCEPT
iptables -A INPUT -p tcp --dport $TRACKER_PORT -j ACCEPT
iptables -A INPUT -p udp --dport $TRACKER_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport 80 -j ACCEPT
iptables -A INPUT -p udp --dport 80 -j ACCEPT
iptables -A INPUT -p tcp --dport 548 -j ACCEPT
iptables -A INPUT -p udp --dport 548 -j ACCEPT
iptables -A INPUT -p tcp --dport 5353 -j ACCEPT
iptables -A INPUT -p udp --dport 5353 -j ACCEPT
iptables -A INPUT -p tcp --dport 5354 -j ACCEPT
iptables -A INPUT -p udp --dport 5354 -j ACCEPT
iptables -A INPUT -p tcp --dport $ZERONET_PORT -j ACCEPT
iptables -A INPUT -p udp --dport $ZERONET_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $IPFS_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $TOX_PORT -j ACCEPT
iptables -A INPUT -p udp --dport $TOX_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $LIBREVAULT_PORT -j ACCEPT
iptables -A INPUT -p udp --dport $LIBREVAULT_PORT -j ACCEPT
iptables -A INPUT -p tcp --dport $TAHOELAFS_PORT -j ACCEPT
# SSB/Patchwork
iptables -A INPUT -p udp --dport 8008 -j ACCEPT
iptables -A INPUT -p tcp --dport 8008 -j ACCEPT
systemctl restart avahi-daemon
verify
}
function monitor {
if [ -z "$IFACE" ] ; then
echo 'error: unable to find wifi interface, not enabling batman-adv mesh'
exit 723657
fi
stop
echo "info: monitoring mesh network $WIFI_SSID on $IFACE"
systemctl stop network-manager
sleep 5
global_rate_limit
# Might have to re-enable wifi
rfkill unblock $(rfkill list|awk -F: "/phy/ {print $1}") || true
ifconfig $IFACE down
ifconfig $IFACE mtu 1532
ifconfig $IFACE hw ether $(assign_peer_address)
iwconfig $IFACE enc off
iwconfig $IFACE mode monitor channel $CHANNEL
sleep 1
iwconfig $IFACE ap $CELLID
modprobe batman-adv
batctl if add $IFACE
ifconfig $IFACE up
horst -i $IFACE
start
}
if ! grep -q "$IFACE" /proc/net/dev; then
echo 'Interface $IFACE was not found'
stop
exit 1
fi
case "$1" in
start|stop|status|monitor)
$1
;;
restart)
stop
sleep 10
start
;;
ping)
batctl ping $2
;;
data)
watch -n1 "batctl s | grep mgmt | grep bytes"
;;
ls|list)
avahi-browse -atl
;;
*)
echo "error: invalid parameter $1"
echo 'usage: $0 {start|stop|restart|status|ping|ls|list}'
exit 2
;;
esac
exit 0