From f3b7768a1f985eeb5321157be0f739058e1b316e Mon Sep 17 00:00:00 2001 From: Bob Mottram Date: Thu, 1 Sep 2016 10:58:09 +0100 Subject: [PATCH] Quick links --- doc/EN/mesh.org | 4 ++++ website/EN/mesh.html | 44 +++++++++++++++++++++++++------------------- 2 files changed, 29 insertions(+), 19 deletions(-) diff --git a/doc/EN/mesh.org b/doc/EN/mesh.org index 54600b56..31e8dbc2 100644 --- a/doc/EN/mesh.org +++ b/doc/EN/mesh.org @@ -20,6 +20,10 @@ Mesh networks are useful as a quick way to make a fully decentralised communications system which is not connected to or reliant upon the internet. Think festivals, hacker conferences, onboard ships at sea, disaster/war zones, small business internal office communications, protests, remote areas of the world, temporary "digital blackouts", scientific expeditions and off-world space colonies. The down side is that you can't access any internet content. The upside is that you can securely communicate with anyone on the local mesh. No ISPs. No payments or subscriptions beyond the cost of obtaining the hardware. Systems need to be within wifi range of each other for the mesh to be created. It can be an ultra-convenient way to do purely local communications. + * [[Ready made images]] + * [[To build the disk image yourself]] + * [[How to use it]] + * Ready made images ** Client images "Client" isn't exactly the right term, but it's a mesh peer with a user interface. These images can be copied to a USB drive, then you can plug it into a laptop/netbook/desktop machine and boot from it. You will probably also need an Atheros USB wifi dongle, because most built-in wifi usually requires proprietary firmware. In the commands below substitute /dev/sdX with the USB drive device, excluding any trailing numbers (eg. /dev/sdb). diff --git a/website/EN/mesh.html b/website/EN/mesh.html index 5949af45..f59738d3 100644 --- a/website/EN/mesh.html +++ b/website/EN/mesh.html @@ -3,7 +3,7 @@ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> - + @@ -256,12 +256,18 @@ for the JavaScript code in this tag. Mesh networks are useful as a quick way to make a fully decentralised communications system which is not connected to or reliant upon the internet. Think festivals, hacker conferences, onboard ships at sea, disaster/war zones, small business internal office communications, protests, remote areas of the world, temporary "digital blackouts", scientific expeditions and off-world space colonies. The down side is that you can't access any internet content. The upside is that you can securely communicate with anyone on the local mesh. No ISPs. No payments or subscriptions beyond the cost of obtaining the hardware. Systems need to be within wifi range of each other for the mesh to be created. It can be an ultra-convenient way to do purely local communications.

-
-

Ready made images

-
-
-

Client images

-
+ + +
+

Ready made images

+
+
+

Client images

+

"Client" isn't exactly the right term, but it's a mesh peer with a user interface. These images can be copied to a USB drive, then you can plug it into a laptop/netbook/desktop machine and boot from it. You will probably also need an Atheros USB wifi dongle, because most built-in wifi usually requires proprietary firmware. In the commands below substitute /dev/sdX with the USB drive device, excluding any trailing numbers (eg. /dev/sdb).

@@ -302,16 +308,16 @@ sudo dd bs=1M -

Router images

-
+
+

Router images

+

Routers are intended to build network coverage for an area using small and low cost hardware. You can bolt them to walls or leave them on window ledges. They don't have any user interface and their only job is to haul network traffic across the mesh. Copy the image to a microSD card and insert it into the router, plug in an Atheros wifi dongle and power on. That should be all you need to do.

-
-

Beaglebone Black

-
+
+

Beaglebone Black

+
sudo apt-get install xz-utils wget
@@ -333,9 +339,9 @@ If you have a few Beaglebone Blacks to use as routers then repeat the dd
-
-

To build the disk image yourself

-
+
+

To build the disk image yourself

+

It's better not to trust images downloaded from random places on the interwebs. Chances are that unless you are in the web of trust of the above GPG signatures then they don't mean very much to you. If you actually want something trustworthy then build the images from scratch. It will take some time. Here's how to do it.

@@ -426,9 +432,9 @@ The resulting image can be copied to a microSD card, inserted into a Beaglebone
-
-

How to use it

-
+
+

How to use it

+

When you first boot from the USB drive the system will create some encryption keys, assign a unique network address to the system and then reboot itself. When that's done you should see a prompt asking for a username. This username just makes it easy for others to initially find you on the mesh and will appear in the list of users.