diff --git a/locale/af/freedombone-config.json b/locale/af/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/af/freedombone-config.json +++ b/locale/af/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/af/freedombone-controlpanel.json b/locale/af/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/af/freedombone-controlpanel.json +++ b/locale/af/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/af/freedombone-wifi.json b/locale/af/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/af/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/af/freedombone-wifi.mo b/locale/af/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/af/freedombone-wifi.mo differ diff --git a/locale/ar/freedombone-config.json b/locale/ar/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ar/freedombone-config.json +++ b/locale/ar/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ar/freedombone-controlpanel.json b/locale/ar/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ar/freedombone-controlpanel.json +++ b/locale/ar/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ar/freedombone-wifi.json b/locale/ar/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ar/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ar/freedombone-wifi.mo b/locale/ar/freedombone-wifi.mo new file mode 100644 index 00000000..95af6aa1 Binary files /dev/null and b/locale/ar/freedombone-wifi.mo differ diff --git a/locale/be/freedombone-config.json b/locale/be/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/be/freedombone-config.json +++ b/locale/be/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/be/freedombone-controlpanel.json b/locale/be/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/be/freedombone-controlpanel.json +++ b/locale/be/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/be/freedombone-wifi.json b/locale/be/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/be/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/be/freedombone-wifi.mo b/locale/be/freedombone-wifi.mo new file mode 100644 index 00000000..a401ad47 Binary files /dev/null and b/locale/be/freedombone-wifi.mo differ diff --git a/locale/bg/freedombone-config.json b/locale/bg/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/bg/freedombone-config.json +++ b/locale/bg/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/bg/freedombone-controlpanel.json b/locale/bg/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/bg/freedombone-controlpanel.json +++ b/locale/bg/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/bg/freedombone-wifi.json b/locale/bg/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/bg/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/bg/freedombone-wifi.mo b/locale/bg/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/bg/freedombone-wifi.mo differ diff --git a/locale/bs/freedombone-config.json b/locale/bs/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/bs/freedombone-config.json +++ b/locale/bs/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/bs/freedombone-controlpanel.json b/locale/bs/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/bs/freedombone-controlpanel.json +++ b/locale/bs/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/bs/freedombone-wifi.json b/locale/bs/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/bs/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/bs/freedombone-wifi.mo b/locale/bs/freedombone-wifi.mo new file mode 100644 index 00000000..a401ad47 Binary files /dev/null and b/locale/bs/freedombone-wifi.mo differ diff --git a/locale/ca/freedombone-config.json b/locale/ca/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ca/freedombone-config.json +++ b/locale/ca/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ca/freedombone-controlpanel.json b/locale/ca/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ca/freedombone-controlpanel.json +++ b/locale/ca/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ca/freedombone-wifi.json b/locale/ca/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ca/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ca/freedombone-wifi.mo b/locale/ca/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/ca/freedombone-wifi.mo differ diff --git a/locale/cs/freedombone-config.json b/locale/cs/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/cs/freedombone-config.json +++ b/locale/cs/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/cs/freedombone-controlpanel.json b/locale/cs/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/cs/freedombone-controlpanel.json +++ b/locale/cs/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/cs/freedombone-wifi.json b/locale/cs/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/cs/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/cs/freedombone-wifi.mo b/locale/cs/freedombone-wifi.mo new file mode 100644 index 00000000..77b5901d Binary files /dev/null and b/locale/cs/freedombone-wifi.mo differ diff --git a/locale/da/freedombone-config.json b/locale/da/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/da/freedombone-config.json +++ b/locale/da/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/da/freedombone-controlpanel.json b/locale/da/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/da/freedombone-controlpanel.json +++ b/locale/da/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/da/freedombone-wifi.json b/locale/da/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/da/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/da/freedombone-wifi.mo b/locale/da/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/da/freedombone-wifi.mo differ diff --git a/locale/de/freedombone-config.json b/locale/de/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/de/freedombone-config.json +++ b/locale/de/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/de/freedombone-controlpanel.json b/locale/de/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/de/freedombone-controlpanel.json +++ b/locale/de/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/de/freedombone-wifi.json b/locale/de/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/de/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/de/freedombone-wifi.mo b/locale/de/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/de/freedombone-wifi.mo differ diff --git a/locale/de_du/freedombone-config.json b/locale/de_du/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/de_du/freedombone-config.json +++ b/locale/de_du/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/de_du/freedombone-controlpanel.json b/locale/de_du/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/de_du/freedombone-controlpanel.json +++ b/locale/de_du/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/de_du/freedombone-wifi.json b/locale/de_du/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/de_du/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/de_du/freedombone-wifi.mo b/locale/de_du/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/de_du/freedombone-wifi.mo differ diff --git a/locale/el/freedombone-config.json b/locale/el/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/el/freedombone-config.json +++ b/locale/el/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/el/freedombone-controlpanel.json b/locale/el/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/el/freedombone-controlpanel.json +++ b/locale/el/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/el/freedombone-wifi.json b/locale/el/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/el/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/el/freedombone-wifi.mo b/locale/el/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/el/freedombone-wifi.mo differ diff --git a/locale/en_us/freedombone-config.json b/locale/en_us/freedombone-config.json index e98b5d2c..af2f12e0 100644 --- a/locale/en_us/freedombone-config.json +++ b/locale/en_us/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "Developer", "Mesh (router)": "Mesh (router)", "Mesh (user device)": "Mesh (user device)", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'", "Give your mesh peer a name": "Give your mesh peer a name", "Wifi Channel (spaced to be non-overlapping):": "Wifi Channel (spaced to be non-overlapping):", "Username": "Username", @@ -189,6 +189,13 @@ "ValiDOM": "ValiDOM", "Freie Unzensierte": "Freie Unzensierte", "Google": "Google", + "Wifi Settings": "Wifi Settings", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:", + "Interface:": "Interface:", + "SSID:": "SSID:", + "Type:": "Type:", + "Passphrase:": "Passphrase:", + "Hotspot:": "Hotspot:", "Choose Dynamic DNS provider:": "Choose Dynamic DNS provider:", "Dynamic DNS provider username": "Dynamic DNS provider username", "Dynamic DNS provider password": "Dynamic DNS provider password", diff --git a/locale/en_us/freedombone-controlpanel.json b/locale/en_us/freedombone-controlpanel.json index 2ef8387c..5b96a614 100644 --- a/locale/en_us/freedombone-controlpanel.json +++ b/locale/en_us/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x", "Set the IP address of your internet router/modem": "Set the IP address of your internet router/modem", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar", + "Wifi Settings": "Wifi Settings", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:", + "Interface:": "Interface:", + "SSID:": "SSID:", + "Type:": "Type:", + "Passphrase:": "Passphrase:", + "Hotspot:": "Hotspot:", + "Wifi settings were changed": "Wifi settings were changed", "Backup and Restore": "Backup and Restore", "Choose an operation:": "Choose an operation:", "Backup data to USB drive": "Backup data to USB drive", diff --git a/locale/en_us/freedombone-wifi.json b/locale/en_us/freedombone-wifi.json new file mode 100644 index 00000000..fdcf638e --- /dev/null +++ b/locale/en_us/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]" +} \ No newline at end of file diff --git a/locale/en_us/freedombone-wifi.mo b/locale/en_us/freedombone-wifi.mo new file mode 100644 index 00000000..0ce1be1b Binary files /dev/null and b/locale/en_us/freedombone-wifi.mo differ diff --git a/locale/es/freedombone-config.json b/locale/es/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/es/freedombone-config.json +++ b/locale/es/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/es/freedombone-controlpanel.json b/locale/es/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/es/freedombone-controlpanel.json +++ b/locale/es/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/es/freedombone-wifi.json b/locale/es/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/es/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/es/freedombone-wifi.mo b/locale/es/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/es/freedombone-wifi.mo differ diff --git a/locale/et/freedombone-config.json b/locale/et/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/et/freedombone-config.json +++ b/locale/et/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/et/freedombone-controlpanel.json b/locale/et/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/et/freedombone-controlpanel.json +++ b/locale/et/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/et/freedombone-wifi.json b/locale/et/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/et/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/et/freedombone-wifi.mo b/locale/et/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/et/freedombone-wifi.mo differ diff --git a/locale/eu/freedombone-config.json b/locale/eu/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/eu/freedombone-config.json +++ b/locale/eu/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/eu/freedombone-controlpanel.json b/locale/eu/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/eu/freedombone-controlpanel.json +++ b/locale/eu/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/eu/freedombone-wifi.json b/locale/eu/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/eu/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/eu/freedombone-wifi.mo b/locale/eu/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/eu/freedombone-wifi.mo differ diff --git a/locale/fa/freedombone-config.json b/locale/fa/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/fa/freedombone-config.json +++ b/locale/fa/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/fa/freedombone-controlpanel.json b/locale/fa/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/fa/freedombone-controlpanel.json +++ b/locale/fa/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/fa/freedombone-wifi.json b/locale/fa/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/fa/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/fa/freedombone-wifi.mo b/locale/fa/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/fa/freedombone-wifi.mo differ diff --git a/locale/fi/freedombone-config.json b/locale/fi/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/fi/freedombone-config.json +++ b/locale/fi/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/fi/freedombone-controlpanel.json b/locale/fi/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/fi/freedombone-controlpanel.json +++ b/locale/fi/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/fi/freedombone-wifi.json b/locale/fi/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/fi/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/fi/freedombone-wifi.mo b/locale/fi/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/fi/freedombone-wifi.mo differ diff --git a/locale/fil/freedombone-config.json b/locale/fil/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/fil/freedombone-config.json +++ b/locale/fil/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/fil/freedombone-controlpanel.json b/locale/fil/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/fil/freedombone-controlpanel.json +++ b/locale/fil/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/fil/freedombone-wifi.json b/locale/fil/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/fil/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/fil/freedombone-wifi.mo b/locale/fil/freedombone-wifi.mo new file mode 100644 index 00000000..9e0a989d Binary files /dev/null and b/locale/fil/freedombone-wifi.mo differ diff --git a/locale/fr/freedombone-config.json b/locale/fr/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/fr/freedombone-config.json +++ b/locale/fr/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/fr/freedombone-controlpanel.json b/locale/fr/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/fr/freedombone-controlpanel.json +++ b/locale/fr/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/fr/freedombone-wifi.json b/locale/fr/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/fr/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/fr/freedombone-wifi.mo b/locale/fr/freedombone-wifi.mo new file mode 100644 index 00000000..71dfa24b Binary files /dev/null and b/locale/fr/freedombone-wifi.mo differ diff --git a/locale/fr_ca/freedombone-config.json b/locale/fr_ca/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/fr_ca/freedombone-config.json +++ b/locale/fr_ca/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/fr_ca/freedombone-controlpanel.json b/locale/fr_ca/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/fr_ca/freedombone-controlpanel.json +++ b/locale/fr_ca/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/fr_ca/freedombone-wifi.json b/locale/fr_ca/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/fr_ca/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/fr_ca/freedombone-wifi.mo b/locale/fr_ca/freedombone-wifi.mo new file mode 100644 index 00000000..71dfa24b Binary files /dev/null and b/locale/fr_ca/freedombone-wifi.mo differ diff --git a/locale/ga/freedombone-config.json b/locale/ga/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ga/freedombone-config.json +++ b/locale/ga/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ga/freedombone-controlpanel.json b/locale/ga/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ga/freedombone-controlpanel.json +++ b/locale/ga/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ga/freedombone-wifi.json b/locale/ga/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ga/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ga/freedombone-wifi.mo b/locale/ga/freedombone-wifi.mo new file mode 100644 index 00000000..406c2352 Binary files /dev/null and b/locale/ga/freedombone-wifi.mo differ diff --git a/locale/gl/freedombone-config.json b/locale/gl/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/gl/freedombone-config.json +++ b/locale/gl/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/gl/freedombone-controlpanel.json b/locale/gl/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/gl/freedombone-controlpanel.json +++ b/locale/gl/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/gl/freedombone-wifi.json b/locale/gl/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/gl/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/gl/freedombone-wifi.mo b/locale/gl/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/gl/freedombone-wifi.mo differ diff --git a/locale/gu/freedombone-config.json b/locale/gu/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/gu/freedombone-config.json +++ b/locale/gu/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/gu/freedombone-controlpanel.json b/locale/gu/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/gu/freedombone-controlpanel.json +++ b/locale/gu/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/gu/freedombone-wifi.json b/locale/gu/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/gu/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/gu/freedombone-wifi.mo b/locale/gu/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/gu/freedombone-wifi.mo differ diff --git a/locale/he/freedombone-config.json b/locale/he/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/he/freedombone-config.json +++ b/locale/he/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/he/freedombone-controlpanel.json b/locale/he/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/he/freedombone-controlpanel.json +++ b/locale/he/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/he/freedombone-wifi.json b/locale/he/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/he/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/he/freedombone-wifi.mo b/locale/he/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/he/freedombone-wifi.mo differ diff --git a/locale/hi/freedombone-config.json b/locale/hi/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/hi/freedombone-config.json +++ b/locale/hi/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/hi/freedombone-controlpanel.json b/locale/hi/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/hi/freedombone-controlpanel.json +++ b/locale/hi/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/hi/freedombone-wifi.json b/locale/hi/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/hi/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/hi/freedombone-wifi.mo b/locale/hi/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/hi/freedombone-wifi.mo differ diff --git a/locale/hr/freedombone-config.json b/locale/hr/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/hr/freedombone-config.json +++ b/locale/hr/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/hr/freedombone-controlpanel.json b/locale/hr/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/hr/freedombone-controlpanel.json +++ b/locale/hr/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/hr/freedombone-wifi.json b/locale/hr/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/hr/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/hr/freedombone-wifi.mo b/locale/hr/freedombone-wifi.mo new file mode 100644 index 00000000..a401ad47 Binary files /dev/null and b/locale/hr/freedombone-wifi.mo differ diff --git a/locale/hu/freedombone-config.json b/locale/hu/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/hu/freedombone-config.json +++ b/locale/hu/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/hu/freedombone-controlpanel.json b/locale/hu/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/hu/freedombone-controlpanel.json +++ b/locale/hu/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/hu/freedombone-wifi.json b/locale/hu/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/hu/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/hu/freedombone-wifi.mo b/locale/hu/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/hu/freedombone-wifi.mo differ diff --git a/locale/id/freedombone-config.json b/locale/id/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/id/freedombone-config.json +++ b/locale/id/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/id/freedombone-controlpanel.json b/locale/id/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/id/freedombone-controlpanel.json +++ b/locale/id/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/id/freedombone-wifi.json b/locale/id/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/id/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/id/freedombone-wifi.mo b/locale/id/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/id/freedombone-wifi.mo differ diff --git a/locale/is/freedombone-config.json b/locale/is/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/is/freedombone-config.json +++ b/locale/is/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/is/freedombone-controlpanel.json b/locale/is/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/is/freedombone-controlpanel.json +++ b/locale/is/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/is/freedombone-wifi.json b/locale/is/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/is/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/is/freedombone-wifi.mo b/locale/is/freedombone-wifi.mo new file mode 100644 index 00000000..22aef6b2 Binary files /dev/null and b/locale/is/freedombone-wifi.mo differ diff --git a/locale/it/freedombone-config.json b/locale/it/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/it/freedombone-config.json +++ b/locale/it/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/it/freedombone-controlpanel.json b/locale/it/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/it/freedombone-controlpanel.json +++ b/locale/it/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/it/freedombone-wifi.json b/locale/it/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/it/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/it/freedombone-wifi.mo b/locale/it/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/it/freedombone-wifi.mo differ diff --git a/locale/ja/freedombone-config.json b/locale/ja/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ja/freedombone-config.json +++ b/locale/ja/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ja/freedombone-controlpanel.json b/locale/ja/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ja/freedombone-controlpanel.json +++ b/locale/ja/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ja/freedombone-wifi.json b/locale/ja/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ja/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ja/freedombone-wifi.mo b/locale/ja/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/ja/freedombone-wifi.mo differ diff --git a/locale/ka/freedombone-config.json b/locale/ka/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ka/freedombone-config.json +++ b/locale/ka/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ka/freedombone-controlpanel.json b/locale/ka/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ka/freedombone-controlpanel.json +++ b/locale/ka/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ka/freedombone-wifi.json b/locale/ka/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ka/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ka/freedombone-wifi.mo b/locale/ka/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/ka/freedombone-wifi.mo differ diff --git a/locale/km/freedombone-config.json b/locale/km/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/km/freedombone-config.json +++ b/locale/km/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/km/freedombone-controlpanel.json b/locale/km/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/km/freedombone-controlpanel.json +++ b/locale/km/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/km/freedombone-wifi.json b/locale/km/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/km/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/km/freedombone-wifi.mo b/locale/km/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/km/freedombone-wifi.mo differ diff --git a/locale/kn/freedombone-config.json b/locale/kn/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/kn/freedombone-config.json +++ b/locale/kn/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/kn/freedombone-controlpanel.json b/locale/kn/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/kn/freedombone-controlpanel.json +++ b/locale/kn/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/kn/freedombone-wifi.json b/locale/kn/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/kn/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/kn/freedombone-wifi.mo b/locale/kn/freedombone-wifi.mo new file mode 100644 index 00000000..d74c229a Binary files /dev/null and b/locale/kn/freedombone-wifi.mo differ diff --git a/locale/ko/freedombone-config.json b/locale/ko/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ko/freedombone-config.json +++ b/locale/ko/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ko/freedombone-controlpanel.json b/locale/ko/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ko/freedombone-controlpanel.json +++ b/locale/ko/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ko/freedombone-wifi.json b/locale/ko/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ko/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ko/freedombone-wifi.mo b/locale/ko/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/ko/freedombone-wifi.mo differ diff --git a/locale/lo/freedombone-config.json b/locale/lo/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/lo/freedombone-config.json +++ b/locale/lo/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/lo/freedombone-controlpanel.json b/locale/lo/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/lo/freedombone-controlpanel.json +++ b/locale/lo/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/lo/freedombone-wifi.json b/locale/lo/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/lo/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/lo/freedombone-wifi.mo b/locale/lo/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/lo/freedombone-wifi.mo differ diff --git a/locale/lt/freedombone-config.json b/locale/lt/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/lt/freedombone-config.json +++ b/locale/lt/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/lt/freedombone-controlpanel.json b/locale/lt/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/lt/freedombone-controlpanel.json +++ b/locale/lt/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/lt/freedombone-wifi.json b/locale/lt/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/lt/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/lt/freedombone-wifi.mo b/locale/lt/freedombone-wifi.mo new file mode 100644 index 00000000..f9eeb64f Binary files /dev/null and b/locale/lt/freedombone-wifi.mo differ diff --git a/locale/lv/freedombone-config.json b/locale/lv/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/lv/freedombone-config.json +++ b/locale/lv/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/lv/freedombone-controlpanel.json b/locale/lv/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/lv/freedombone-controlpanel.json +++ b/locale/lv/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/lv/freedombone-wifi.json b/locale/lv/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/lv/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/lv/freedombone-wifi.mo b/locale/lv/freedombone-wifi.mo new file mode 100644 index 00000000..913491cf Binary files /dev/null and b/locale/lv/freedombone-wifi.mo differ diff --git a/locale/mi_tn/freedombone-config.json b/locale/mi_tn/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/mi_tn/freedombone-config.json +++ b/locale/mi_tn/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/mi_tn/freedombone-controlpanel.json b/locale/mi_tn/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/mi_tn/freedombone-controlpanel.json +++ b/locale/mi_tn/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/mi_tn/freedombone-wifi.json b/locale/mi_tn/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/mi_tn/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/mi_tn/freedombone-wifi.mo b/locale/mi_tn/freedombone-wifi.mo new file mode 100644 index 00000000..71dfa24b Binary files /dev/null and b/locale/mi_tn/freedombone-wifi.mo differ diff --git a/locale/mi_wwow/freedombone-config.json b/locale/mi_wwow/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/mi_wwow/freedombone-config.json +++ b/locale/mi_wwow/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/mi_wwow/freedombone-controlpanel.json b/locale/mi_wwow/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/mi_wwow/freedombone-controlpanel.json +++ b/locale/mi_wwow/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/mi_wwow/freedombone-wifi.json b/locale/mi_wwow/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/mi_wwow/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/mi_wwow/freedombone-wifi.mo b/locale/mi_wwow/freedombone-wifi.mo new file mode 100644 index 00000000..71dfa24b Binary files /dev/null and b/locale/mi_wwow/freedombone-wifi.mo differ diff --git a/locale/ml/freedombone-config.json b/locale/ml/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ml/freedombone-config.json +++ b/locale/ml/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ml/freedombone-controlpanel.json b/locale/ml/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ml/freedombone-controlpanel.json +++ b/locale/ml/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ml/freedombone-wifi.json b/locale/ml/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ml/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ml/freedombone-wifi.mo b/locale/ml/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/ml/freedombone-wifi.mo differ diff --git a/locale/mn/freedombone-config.json b/locale/mn/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/mn/freedombone-config.json +++ b/locale/mn/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/mn/freedombone-controlpanel.json b/locale/mn/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/mn/freedombone-controlpanel.json +++ b/locale/mn/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/mn/freedombone-wifi.json b/locale/mn/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/mn/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/mn/freedombone-wifi.mo b/locale/mn/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/mn/freedombone-wifi.mo differ diff --git a/locale/ms/freedombone-config.json b/locale/ms/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ms/freedombone-config.json +++ b/locale/ms/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ms/freedombone-controlpanel.json b/locale/ms/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ms/freedombone-controlpanel.json +++ b/locale/ms/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ms/freedombone-wifi.json b/locale/ms/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ms/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ms/freedombone-wifi.mo b/locale/ms/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/ms/freedombone-wifi.mo differ diff --git a/locale/nl/freedombone-config.json b/locale/nl/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/nl/freedombone-config.json +++ b/locale/nl/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/nl/freedombone-controlpanel.json b/locale/nl/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/nl/freedombone-controlpanel.json +++ b/locale/nl/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/nl/freedombone-wifi.json b/locale/nl/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/nl/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/nl/freedombone-wifi.mo b/locale/nl/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/nl/freedombone-wifi.mo differ diff --git a/locale/nn/freedombone-config.json b/locale/nn/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/nn/freedombone-config.json +++ b/locale/nn/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/nn/freedombone-controlpanel.json b/locale/nn/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/nn/freedombone-controlpanel.json +++ b/locale/nn/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/nn/freedombone-wifi.json b/locale/nn/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/nn/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/nn/freedombone-wifi.mo b/locale/nn/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/nn/freedombone-wifi.mo differ diff --git a/locale/no/freedombone-config.json b/locale/no/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/no/freedombone-config.json +++ b/locale/no/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/no/freedombone-controlpanel.json b/locale/no/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/no/freedombone-controlpanel.json +++ b/locale/no/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/no/freedombone-wifi.json b/locale/no/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/no/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/no/freedombone-wifi.mo b/locale/no/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/no/freedombone-wifi.mo differ diff --git a/locale/no_gr/freedombone-config.json b/locale/no_gr/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/no_gr/freedombone-config.json +++ b/locale/no_gr/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/no_gr/freedombone-controlpanel.json b/locale/no_gr/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/no_gr/freedombone-controlpanel.json +++ b/locale/no_gr/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/no_gr/freedombone-wifi.json b/locale/no_gr/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/no_gr/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/no_gr/freedombone-wifi.mo b/locale/no_gr/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/no_gr/freedombone-wifi.mo differ diff --git a/locale/pl/freedombone-config.json b/locale/pl/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/pl/freedombone-config.json +++ b/locale/pl/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/pl/freedombone-controlpanel.json b/locale/pl/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/pl/freedombone-controlpanel.json +++ b/locale/pl/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/pl/freedombone-wifi.json b/locale/pl/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/pl/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/pl/freedombone-wifi.mo b/locale/pl/freedombone-wifi.mo new file mode 100644 index 00000000..c10340dc Binary files /dev/null and b/locale/pl/freedombone-wifi.mo differ diff --git a/locale/pt/freedombone-config.json b/locale/pt/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/pt/freedombone-config.json +++ b/locale/pt/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/pt/freedombone-controlpanel.json b/locale/pt/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/pt/freedombone-controlpanel.json +++ b/locale/pt/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/pt/freedombone-wifi.json b/locale/pt/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/pt/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/pt/freedombone-wifi.mo b/locale/pt/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/pt/freedombone-wifi.mo differ diff --git a/locale/pt_br/freedombone-config.json b/locale/pt_br/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/pt_br/freedombone-config.json +++ b/locale/pt_br/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/pt_br/freedombone-controlpanel.json b/locale/pt_br/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/pt_br/freedombone-controlpanel.json +++ b/locale/pt_br/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/pt_br/freedombone-wifi.json b/locale/pt_br/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/pt_br/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/pt_br/freedombone-wifi.mo b/locale/pt_br/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/pt_br/freedombone-wifi.mo differ diff --git a/locale/ro/freedombone-config.json b/locale/ro/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ro/freedombone-config.json +++ b/locale/ro/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ro/freedombone-controlpanel.json b/locale/ro/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ro/freedombone-controlpanel.json +++ b/locale/ro/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ro/freedombone-wifi.json b/locale/ro/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ro/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ro/freedombone-wifi.mo b/locale/ro/freedombone-wifi.mo new file mode 100644 index 00000000..8a05d195 Binary files /dev/null and b/locale/ro/freedombone-wifi.mo differ diff --git a/locale/ru/freedombone-config.json b/locale/ru/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ru/freedombone-config.json +++ b/locale/ru/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ru/freedombone-controlpanel.json b/locale/ru/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ru/freedombone-controlpanel.json +++ b/locale/ru/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ru/freedombone-wifi.json b/locale/ru/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ru/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ru/freedombone-wifi.mo b/locale/ru/freedombone-wifi.mo new file mode 100644 index 00000000..a401ad47 Binary files /dev/null and b/locale/ru/freedombone-wifi.mo differ diff --git a/locale/sk/freedombone-config.json b/locale/sk/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/sk/freedombone-config.json +++ b/locale/sk/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/sk/freedombone-controlpanel.json b/locale/sk/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/sk/freedombone-controlpanel.json +++ b/locale/sk/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/sk/freedombone-wifi.json b/locale/sk/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/sk/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/sk/freedombone-wifi.mo b/locale/sk/freedombone-wifi.mo new file mode 100644 index 00000000..77b5901d Binary files /dev/null and b/locale/sk/freedombone-wifi.mo differ diff --git a/locale/sl/freedombone-config.json b/locale/sl/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/sl/freedombone-config.json +++ b/locale/sl/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/sl/freedombone-controlpanel.json b/locale/sl/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/sl/freedombone-controlpanel.json +++ b/locale/sl/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/sl/freedombone-wifi.json b/locale/sl/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/sl/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/sl/freedombone-wifi.mo b/locale/sl/freedombone-wifi.mo new file mode 100644 index 00000000..215a4df0 Binary files /dev/null and b/locale/sl/freedombone-wifi.mo differ diff --git a/locale/sm/freedombone-config.json b/locale/sm/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/sm/freedombone-config.json +++ b/locale/sm/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/sm/freedombone-controlpanel.json b/locale/sm/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/sm/freedombone-controlpanel.json +++ b/locale/sm/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/sm/freedombone-wifi.json b/locale/sm/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/sm/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/sm/freedombone-wifi.mo b/locale/sm/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/sm/freedombone-wifi.mo differ diff --git a/locale/so/freedombone-config.json b/locale/so/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/so/freedombone-config.json +++ b/locale/so/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/so/freedombone-controlpanel.json b/locale/so/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/so/freedombone-controlpanel.json +++ b/locale/so/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/so/freedombone-wifi.json b/locale/so/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/so/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/so/freedombone-wifi.mo b/locale/so/freedombone-wifi.mo new file mode 100644 index 00000000..0e1ff27f Binary files /dev/null and b/locale/so/freedombone-wifi.mo differ diff --git a/locale/sq/freedombone-config.json b/locale/sq/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/sq/freedombone-config.json +++ b/locale/sq/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/sq/freedombone-controlpanel.json b/locale/sq/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/sq/freedombone-controlpanel.json +++ b/locale/sq/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/sq/freedombone-wifi.json b/locale/sq/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/sq/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/sq/freedombone-wifi.mo b/locale/sq/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/sq/freedombone-wifi.mo differ diff --git a/locale/sr/freedombone-config.json b/locale/sr/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/sr/freedombone-config.json +++ b/locale/sr/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/sr/freedombone-controlpanel.json b/locale/sr/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/sr/freedombone-controlpanel.json +++ b/locale/sr/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/sr/freedombone-wifi.json b/locale/sr/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/sr/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/sr/freedombone-wifi.mo b/locale/sr/freedombone-wifi.mo new file mode 100644 index 00000000..a401ad47 Binary files /dev/null and b/locale/sr/freedombone-wifi.mo differ diff --git a/locale/sv/freedombone-config.json b/locale/sv/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/sv/freedombone-config.json +++ b/locale/sv/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/sv/freedombone-controlpanel.json b/locale/sv/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/sv/freedombone-controlpanel.json +++ b/locale/sv/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/sv/freedombone-wifi.json b/locale/sv/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/sv/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/sv/freedombone-wifi.mo b/locale/sv/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/sv/freedombone-wifi.mo differ diff --git a/locale/ta/freedombone-config.json b/locale/ta/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/ta/freedombone-config.json +++ b/locale/ta/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/ta/freedombone-controlpanel.json b/locale/ta/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/ta/freedombone-controlpanel.json +++ b/locale/ta/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/ta/freedombone-wifi.json b/locale/ta/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/ta/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/ta/freedombone-wifi.mo b/locale/ta/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/ta/freedombone-wifi.mo differ diff --git a/locale/th/freedombone-config.json b/locale/th/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/th/freedombone-config.json +++ b/locale/th/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/th/freedombone-controlpanel.json b/locale/th/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/th/freedombone-controlpanel.json +++ b/locale/th/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/th/freedombone-wifi.json b/locale/th/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/th/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/th/freedombone-wifi.mo b/locale/th/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/th/freedombone-wifi.mo differ diff --git a/locale/tl/freedombone-config.json b/locale/tl/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/tl/freedombone-config.json +++ b/locale/tl/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/tl/freedombone-controlpanel.json b/locale/tl/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/tl/freedombone-controlpanel.json +++ b/locale/tl/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/tl/freedombone-wifi.json b/locale/tl/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/tl/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/tl/freedombone-wifi.mo b/locale/tl/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/tl/freedombone-wifi.mo differ diff --git a/locale/to/freedombone-config.json b/locale/to/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/to/freedombone-config.json +++ b/locale/to/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/to/freedombone-controlpanel.json b/locale/to/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/to/freedombone-controlpanel.json +++ b/locale/to/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/to/freedombone-wifi.json b/locale/to/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/to/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/to/freedombone-wifi.mo b/locale/to/freedombone-wifi.mo new file mode 100644 index 00000000..fd7031cd Binary files /dev/null and b/locale/to/freedombone-wifi.mo differ diff --git a/locale/tr/freedombone-config.json b/locale/tr/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/tr/freedombone-config.json +++ b/locale/tr/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/tr/freedombone-controlpanel.json b/locale/tr/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/tr/freedombone-controlpanel.json +++ b/locale/tr/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/tr/freedombone-wifi.json b/locale/tr/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/tr/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/tr/freedombone-wifi.mo b/locale/tr/freedombone-wifi.mo new file mode 100644 index 00000000..d9b1dfda Binary files /dev/null and b/locale/tr/freedombone-wifi.mo differ diff --git a/locale/uk/freedombone-config.json b/locale/uk/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/uk/freedombone-config.json +++ b/locale/uk/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/uk/freedombone-controlpanel.json b/locale/uk/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/uk/freedombone-controlpanel.json +++ b/locale/uk/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/uk/freedombone-wifi.json b/locale/uk/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/uk/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/uk/freedombone-wifi.mo b/locale/uk/freedombone-wifi.mo new file mode 100644 index 00000000..a401ad47 Binary files /dev/null and b/locale/uk/freedombone-wifi.mo differ diff --git a/locale/vi/freedombone-config.json b/locale/vi/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/vi/freedombone-config.json +++ b/locale/vi/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/vi/freedombone-controlpanel.json b/locale/vi/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/vi/freedombone-controlpanel.json +++ b/locale/vi/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/vi/freedombone-wifi.json b/locale/vi/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/vi/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/vi/freedombone-wifi.mo b/locale/vi/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/vi/freedombone-wifi.mo differ diff --git a/locale/zh_cn/freedombone-config.json b/locale/zh_cn/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/zh_cn/freedombone-config.json +++ b/locale/zh_cn/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/zh_cn/freedombone-controlpanel.json b/locale/zh_cn/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/zh_cn/freedombone-controlpanel.json +++ b/locale/zh_cn/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/zh_cn/freedombone-wifi.json b/locale/zh_cn/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/zh_cn/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/zh_cn/freedombone-wifi.mo b/locale/zh_cn/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/zh_cn/freedombone-wifi.mo differ diff --git a/locale/zh_tw/freedombone-config.json b/locale/zh_tw/freedombone-config.json index 52fa6f53..c88c4c90 100644 --- a/locale/zh_tw/freedombone-config.json +++ b/locale/zh_tw/freedombone-config.json @@ -108,7 +108,7 @@ "Developer": "", "Mesh (router)": "", "Mesh (user device)": "", - "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "", + "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "", "Give your mesh peer a name": "", "Wifi Channel (spaced to be non-overlapping):": "", "Username": "", @@ -189,6 +189,13 @@ "ValiDOM": "", "Freie Unzensierte": "", "Google": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", "Choose Dynamic DNS provider:": "", "Dynamic DNS provider username": "", "Dynamic DNS provider password": "", diff --git a/locale/zh_tw/freedombone-controlpanel.json b/locale/zh_tw/freedombone-controlpanel.json index 18363041..bd201df8 100644 --- a/locale/zh_tw/freedombone-controlpanel.json +++ b/locale/zh_tw/freedombone-controlpanel.json @@ -166,6 +166,14 @@ "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "", "Set the IP address of your internet router/modem": "", "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "", + "Wifi Settings": "", + "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "", + "Interface:": "", + "SSID:": "", + "Type:": "", + "Passphrase:": "", + "Hotspot:": "", + "Wifi settings were changed": "", "Backup and Restore": "", "Choose an operation:": "", "Backup data to USB drive": "", diff --git a/locale/zh_tw/freedombone-wifi.json b/locale/zh_tw/freedombone-wifi.json new file mode 100644 index 00000000..0078dce4 --- /dev/null +++ b/locale/zh_tw/freedombone-wifi.json @@ -0,0 +1,3 @@ +{ + "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "" +} \ No newline at end of file diff --git a/locale/zh_tw/freedombone-wifi.mo b/locale/zh_tw/freedombone-wifi.mo new file mode 100644 index 00000000..e4442e7c Binary files /dev/null and b/locale/zh_tw/freedombone-wifi.mo differ