diff --git a/doc/EN/mesh_images.org b/doc/EN/mesh_images.org
index dc654892..7d96ccd3 100644
--- a/doc/EN/mesh_images.org
+++ b/doc/EN/mesh_images.org
@@ -35,12 +35,36 @@ The MultiWriter tool is also available within mesh client images, so that you ca
 
 "Client" isn't exactly the right term, but it's a mesh peer with a user interface. These images can be copied to a USB drive, then you can plug it into a laptop/netbook/desktop machine and boot from it. You will probably also need an Atheros USB wifi dongle (the black protruding object on the left side of the netbook in the picture above), because most built-in wifi usually requires proprietary firmware. In the commands below substitute /dev/sdX with the USB drive device, excluding any trailing numbers (eg. /dev/sdb). The USB drive you're copying to will need to be at least 16GB in size.
 
+Install some prerequisites:
+
 #+begin_src bash
 sudo apt-get install xz-utils wget
+#+end_src
+
+To download images with dat:
+
+#+begin_src bash
+dat clone dat://e2ed9767d6ab64f4c43a2adbce65af225133fec7ba95737f0a2f6ae292ba358e/
+cd e2ed9767d6ab64f4c43a2adbce65af225133fec7ba95737f0a2f6ae292ba358e
+#+end_src
+
+Or to download images directly with wget (may be slower):
+
+#+begin_src bash
 wget https://freedombone.net/downloads/v31/freedombone-meshclient-i386.img.xz
 wget https://freedombone.net/downloads/v31/freedombone-meshclient-i386.img.xz.sig
+#+end_src
+
+Check the signature:
+
+#+begin_src bash
 gpg --verify freedombone-meshclient-i386.img.xz.sig
 unxz freedombone-meshclient-i386.img.xz
+#+end_src
+
+Then clone to the USB drive, where sdX is your USB device:
+
+#+begin_src bash
 sudo dd if=/dev/zero of=/dev/sdX bs=32M count=8
 sudo dd bs=32M if=freedombone-meshclient-i386.img of=/dev/sdX conv=fdatasync,sync,noerror
 #+end_src
@@ -49,12 +73,36 @@ To get a number of systems onto the mesh repeat the /dd/ command to create howev
 
 If you're in an emergency and don't have Atheros wifi dongles then there is also an "insecure" image which contains some proprietary wifi drivers which may work with a wider range of laptops. Proprietary drivers *are not recommended* because they're unsupportable and may be exploitable or contain malicious antifeatures which fundamentally compromise the security of the network. However, the trade-off between security/maintainability and simply having the ability to communicate at all may be a valid one in some situations.
 
+Install some prerequisites:
+
 #+begin_src bash
 sudo apt-get install xz-utils wget
+#+end_src
+
+To download images with dat:
+
+#+begin_src bash
+dat clone dat://6d1b73d13b6f9b5c481c6dfd64be6aa58e1cd2d153a6bb04bbc177999ee9925e/
+cd 6d1b73d13b6f9b5c481c6dfd64be6aa58e1cd2d153a6bb04bbc177999ee9925e
+#+end_src
+
+Or to download images directly with wget (may be slower):
+
+#+begin_src bash
 wget https://freedombone.net/downloads/v31/freedombone-meshclient-insecure-i386.img.xz
 wget https://freedombone.net/downloads/v31/freedombone-meshclient-insecure-i386.img.xz.sig
+#+end_src
+
+Check the signature:
+
+#+begin_src bash
 gpg --verify freedombone-meshclient-insecure-i386.img.xz.sig
 unxz freedombone-meshclient-insecure-i386.img.xz
+#+end_src
+
+Then clone to the USB drive, where sdX is your USB device:
+
+#+begin_src bash
 sudo dd if=/dev/zero of=/dev/sdX bs=32M count=8
 sudo dd bs=32M if=freedombone-meshclient-insecure-i386.img of=/dev/sdX conv=fdatasync,sync,noerror
 #+end_src
@@ -72,8 +120,6 @@ sudo apt-get install xz-utils wget
 wget https://freedombone.net/downloads/v31/freedombone-mesh_beaglebone-armhf.img.xz
 wget https://freedombone.net/downloads/v31/freedombone-mesh_beaglebone-armhf.img.xz.sig
 gpg --verify freedombone-mesh_beaglebone-armhf.img.xz.sig
-sha256sum freedombone-mesh_beaglebone-armhf.img.xz
-ad8f22c0d46c98a80aa47b5809402971cf5cf26ebf587c59a667307b2386c3d2
 unxz freedombone-mesh_beaglebone-armhf.img.xz
 sudo dd bs=32M if=freedombone-mesh_beaglebone-armhf.img of=/dev/sdX conv=fdatasync,sync,noerror
 #+end_src