freedombone/locale/hr/freedombone-controlpanel.json

196 lines
8.9 KiB
JSON

{
"Press any key to continue...": "",
"Check for updates": "",
"Upgrade script was not found": "",
"Freedombone Control Panel": "",
"Main Repository (Mirrors)": "",
"If you do not wish to use the default repositories they can be obtained from mirrors on another ${PROJECT_NAME} server.": "",
"URL:": "",
"SSH Port:": "",
"Password:": "",
"Main Repository": "",
"Main repository set to $FRIENDS_MIRRORS_SERVER": "",
"Add new user": "",
"Username:": "",
"ssh public key (optional):": "",
"New username": "",
"No username was given": "",
"Invalid username": "",
"The username should not contain any spaces": "",
"ssh public key": "",
"This does not look like an ssh public key": "",
"Select User": "",
"Select one of the following:": "",
"Administrator user": "",
"You can't delete the administrator user": "",
"No Administrator user found. Check $COMPLETION_FILE": "",
"Username not found": "",
"Home directory not found": "",
"Change password": "",
"New password for user $SELECTED_USERNAME": "",
"The password should be ${MINIMUM_PASSWORD_LENGTH} or more characters": "",
"Password for $SELECTED_USERNAME was changed": "",
"Change ssh public key": "",
"\\nThis is the administrator user.\\n\\nAre you sure you want to change the ssh public key for the administrator?": "",
"Change ssh public key for $SELECTED_USERNAME": "",
"Paste the ssh public key below": "",
"ssh public key was installed": "",
"Exit back to user mainenance": "",
"Remove a mailing list for $SELECTED_USERNAME": "",
"Remove user from mailing list": "",
"${SELECTED_USERNAME} has been removed from ${remove_list_name}": "",
"Subscribe $SELECTED_USERNAME to a mailing list": "",
"You can either enter a subject or an email address\\n": "",
"List folder name:": "",
"Name between [] on subject line:": "",
"List email address:": "",
"Public:": "",
"yes": "",
"Add mailing list": "",
"No mailing list name was given": "",
"No mailing list subject or address was given": "",
"Unrecognised email address": "",
"$LIST_NAME list was added": "",
"Email rule for user $SELECTED_USERNAME": "",
"When email arrives from address:": "",
"Move to folder:": "",
"no": "",
"Add email rule": "",
"No email address was given": "",
"No folder name was given": "",
"Email rule for $RULE_EMAIL was added": "",
"Block/Unblock email going to": "",
"Block it:": "",
"Block/Unblock an email": "",
"Block an email": "",
"Unblock an email": "",
"When email arrives with subject text:": "",
"No subject was given": "",
"USB Master Keydrive": "",
"Plug in a LUKS encrypted USB drive": "",
"USB Fragment Keydrive": "",
"Backup data to USB": "",
"Detected USB drive $USB_DRIVE": "",
"all": "",
"Exit": "",
"Restore apps": "",
"Restore apps from USB drive $USB_DRIVE": "",
"Freedombone": "",
"Restore all apps from USB": "",
"Restore failed with code $retcode": "",
"Restore all apps from $1": "",
"Restore complete": "",
"Restore apps from USB": "",
"Restore of ${app_name} failed with code $retcode": "",
"Restore apps from $1": "",
"Restore data from USB": "",
"Plug in your backup USB drive": "",
"Restore data from remote server": "",
"Unknown admin user": "",
"Restore from remote server": "",
"Enter the domain name of the server from which you wish to restore": "",
"Remote server domain name": "",
"Invalid domain name": "",
"\\nDo you want to enable other systems to ping this machine?\\n\\nPing may be useful for diagnostic purposes, but for added security you may not want to enable it.": "",
"Enable Ping / ICMP": "",
"Logging": "",
"\\nDo you want to turn logging on?": "",
"Restore GPG key for user": "",
"Plug in your USB keydrive": "",
"Format USB drive $USB_DRIVE": "",
"\\nPlease confirm that you wish to format drive\\n\\n ${USB_DRIVE}\\n\\nAll current data on the drive will be lost, and you will be prompted to give a password used to encrypt the drive.\\n\\nDANGER: If you screw up here and format the wrong drive it's your own fault!": "",
"Formatting drive $USB_DRIVE. ALL CONTENTS WILL BE LOST.": "",
"Remove backups from a USB drive $USB_DRIVE": "",
"\\nPlease confirm that you wish to remove backups from this drive\\n\\n ${drive}\\n\\nYou will not be able to recover them afterwards.": "",
"Power off the system": "",
"\\nPlease confirm that you wish to power off the system.\\n\\nWARNING: to power on again you will need to have physical access to the hardware.": "",
"Restart the system": "",
"\\nPlease confirm that you wish to restart the system.\\n\\nWARNING: If you are using full disk encryption then you will need physical access to the hardware to type in the password": "",
"Change the name of this system": "",
"New local network name": "",
"The name of this system on your local network was changed successfully": "",
"Return to using a dynamic IP address": "",
"\\nDo you wish to go back to using a dynamic IP address?": "",
"System is rebooting. You may need to close this terminal and log in from a new one.": "",
"Set a static local IP address": "",
"In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be ${IPv4_address_base}.x\\n\\nIf you leave this field blank then the system will revert to using a dynamic IP address.": "",
"Set the IP address of your internet router/modem": "",
"Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be ${IPv4_address_base}.1, ${IPv4_address_base}.254, or similar": "",
"Static local IP address": "",
"\\nSet a static address for the wifi adapter?\\n\\nIf you select 'no' then wired ethernet will be used.": "",
"\\nFor the change to take effect your system will now need to reboot. Do this now?": "",
"Wifi Settings": "",
"Wifi settings were changed.": "",
"Wifi settings were changed. You will need to restart the system with ethernet cable removed for the changes to take effect.": "",
"Hotspot Settings": "",
"Enabled (yes/no):": "",
"SSID:": "",
"Type (wpa2-psk/none):": "",
"Passphrase:": "",
"No wifi hotspot passphrase was given": "",
"Wifi hotspot passphrase was too short": "",
"Hotspot settings were changed": "",
"Reinstall MariaDB": "",
"\\nThis should be a LAST RESORT, if the mysql daemon won't start. You will lose ALL databases and will then need to restore them from backup.\\n\\nAre you sure that you wish to continue?": "",
"MariaDB has been reinstalled": "",
"Firewall Settings": "",
"Email Domains": "",
"Enter the list of email domains to use, separated by semicolons": "",
"Email domains were changed": "",
"Email Domains not set": "",
"There should be no spaces in the list": "",
"SMTP Proxy for $ADMIN_USER": "",
"You may need to proxy outgoing email via your ISP's mail server. If so enter the details below.": "",
"Enable proxy:": "",
"Protocol (smtp/smtps):": "",
"ISP mail server:": "",
"Port:": "",
"Backup and Restore": "",
"Choose an operation:": "",
"Backup data to USB drive": "",
"Restore GPG key from USB keydrive": "",
"Restore data from USB drive": "",
"Reinstall mariadb": "",
"Configure remote backups": "",
"Restore from remote backup": "",
"Backup GPG key to USB (master keydrive)": "",
"Backup GPG key to USB (fragment keydrive)": "",
"Format a USB drive (LUKS encrypted)": "",
"Remove backups from a USB drive": "",
"Back to main menu": "",
"Email Menu": "",
"Add a user to a mailing list": "",
"Remove a user from a mailing list": "",
"Add an email rule": "",
"Block/Unblock an email address": "",
"Block/Unblock email with subject text": "",
"Outgoing Email Proxy": "",
"Extra email domains": "",
"Manage Users": "",
"Add a user": "",
"Delete a user": "",
"Change user password": "",
"Change user ssh public key": "",
"Enable Wifi": "",
"\\nDo you wish to enable wifi?": "",
"Wifi": "",
"No wifi adaptors were detected": "",
"Wifi Menu": "",
"${status_str}\\n\\nChoose an operation:": "",
"Enable or disable Wifi": "",
"Configure wifi networks": "",
"Manually edit wifi networks file": "",
"Hotspot settings": "",
"Change Settings for an App": "",
"Control Panel": "",
"About this system": "",
"Show Firewall": "",
"Reset Tripwire": "",
"App Settings": "",
"Add/Remove Apps": "",
"Logging on/off": "",
"Ping enable/disable": "",
"Security Settings": "",
"Set the main repository (repo mirrors)": "",
"Wifi menu": ""
}