#!/bin/bash
#
# .---.                  .              .
# |                      |              |
# |--- .--. .-.  .-.  .-.|  .-. .--.--. |.-.  .-. .--.  .-.
# |    |   (.-' (.-' (   | (   )|  |  | |   )(   )|  | (.-'
# '    '     --'  --'  -' -  -' '  '   -' -'   -' '   -  --'
#
#                    Freedom in the Cloud
#
# Creates a debian image using vmdebootstrap
#
# License
# =======
#
# Copyright (C) 2015 Bob Mottram <bob@robotics.uk.to>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.

PROJECT_NAME='freedombone'

export TEXTDOMAIN=${PROJECT_NAME}-image
export TEXTDOMAINDIR="/usr/share/locale"

# fixed username and password when the --generic option is used
GENERIC_IMAGE_USERNAME='fbone'
GENERIC_IMAGE_PASSWORD='freedombone'

IMAGE_TYPE='beaglebone'
CURR_DIR=$(pwd)
CURR_USER=$(echo $USER)
BUILD_DIR=~/.tmp_${PROJECT_NAME}_build
VMDEBOOTSTRAP_REPO=git://git.liw.fi/vmdebootstrap
VMDEBOOTSTRAP_VERSION=0.8
MAKEFILE=${PROJECT_NAME}-image-makefile
IMAGE_SIZE=4G

USERNAME=$(echo $USER)
PASSWORD=

# IP address of the router (gateway)
ROUTER_IP_ADDRESS="192.168.1.254"

# The fixed IP address of the Beaglebone Black (or other SBC) on your local network
BOX_IP_ADDRESS="192.168.1.55"

# DNS
NAMESERVER1='213.73.91.35'
NAMESERVER2='85.214.20.141'

# An optional freedombone configuration file
CONFIG_FILENAME=

DEFAULT_DOMAIN_NAME="${PROJECT_NAME}.local"

# Minimum number of characters in a password
MINIMUM_PASSWORD_LENGTH=10

# Optional ssh public key to allow
SSH_PUBKEY="no"

# interactive mode
INTERACTIVE="no"

# Whether this is a generic image for mass redistribution on the interwebs
GENERIC_IMAGE="yes"

# Whether to reduce the number of decisions during interactive install
MINIMAL_INSTALL="yes"

while [[ $# > 1 ]]
do
key="$1"

case $key in
    -h|--help)
    show_help
    ;;
    -c|--config)
    shift
    CONFIG_FILENAME="$1"
    if [ ! -f $CONFIG_FILENAME ]; then
        echo $"Config file $CONFIG_FILENAME not found"
        exit 3
    fi
    DEFAULT_DOMAIN_NAME=$(cat $CONFIG_FILENAME | grep 'DEFAULT_DOMAIN_NAME' | awk -F '=' '{print $2}')
    ;;
    -t|--target|--board)
    shift
    IMAGE_TYPE="$1"
    ;;
    -u|--user|--username)
    shift
    USERNAME="$1"
    ;;
    -p|--password)
    shift
    PASSWORD="$1"
    if [ ${#PASSWORD} -lt $MINIMUM_PASSWORD_LENGTH ]; then
        echo $"Your password chould contain at least ${MINIMUM_PASSWORD_LENGTH} characters"
        exit 3628
    fi
    ;;
    --sshkey|--sshpubkey|--pubkey)
    shift
    SSH_PUBKEY="$1"
    ;;
    -s|--size)
    shift
    IMAGE_SIZE="$1"
    ;;
    # Box static IP address on the LAN
    --ip)
    shift
    BOX_IP_ADDRESS="$1"
    ;;
    # Router IP address on the LAN
    --iprouter)
    shift
    ROUTER_IP_ADDRESS="$1"
    ;;
    # nameserver 1
    --ns1|--nameserver1)
    shift
    NAMESERVER1="$1"
    ;;
    # nameserver 2
    --ns2|--nameserver2)
    shift
    NAMESERVER2="$1"
    ;;
    -i|--interactive)
    shift
    INTERACTIVE="$1"
    ;;
    -g|--generic)
    shift
    GENERIC_IMAGE="$1"
    ;;
    --minimal)
    shift
    MINIMAL_INSTALL="$1"
    ;;
    *)
    # unknown option
    ;;
esac
shift
done

if [[ $INTERACTIVE == "yes" || $INTERACTIVE == "y" || $INTERACTIVE == "Yes" ]]; then
    freedombone-config --minimal "$MINIMAL_INSTALL"
    if [ -f freedombone.cfg ]; then
        CONFIG_FILENAME=freedombone.cfg
        DEFAULT_DOMAIN_NAME=$(cat $CONFIG_FILENAME | grep 'DEFAULT_DOMAIN_NAME' | awk -F '=' '{print $2}')
    fi
fi

if [[ $GENERIC_IMAGE == "yes" ]]; then
    USERNAME=$GENERIC_IMAGE_USERNAME
    PASSWORD=$GENERIC_IMAGE_PASSWORD
fi

if [ ! $PASSWORD ]; then
    # generate a random password
    PASSWORD="$(openssl rand -base64 10 | cut -c1-8)"
fi

rm $CURR_DIR/${PROJECT_NAME}*.img.bz2
rm $CURR_DIR/${PROJECT_NAME}*.img
rm $CURR_DIR/${PROJECT_NAME}*.sig
rm $CURR_DIR/${PROJECT_NAME}*.vdi
rm $CURR_DIR/${PROJECT_NAME}*.qcow2

if [ -f ${CURR_DIR}/${PROJECT_NAME}_login_credentials.txt ]; then
    rm ${CURR_DIR}/${PROJECT_NAME}_login_credentials.txt
fi

if [ -d $BUILD_DIR ]; then
    rm -rf $BUILD_DIR
fi
mkdir -p $BUILD_DIR
if [ -f /usr/local/bin/$MAKEFILE ]; then
    cp /usr/local/bin/$MAKEFILE $BUILD_DIR/Makefile
else
    cp /usr/bin/$MAKEFILE $BUILD_DIR/Makefile
fi

cp -r /etc/${PROJECT_NAME}/* $BUILD_DIR
rm -rf $BUILD_DIR/vendor
chown -R $CURR_USER:$CURR_USER $BUILD_DIR
cd $BUILD_DIR

cd $BUILD_DIR
make $IMAGE_TYPE \
    USERNAME="$USERNAME" \
    PASSWORD="$PASSWORD" \
    ROUTER_IP_ADDRESS="$ROUTER_IP_ADDRESS" \
    BOX_IP_ADDRESS="$BOX_IP_ADDRESS" \
    NAMESERVER1="$NAMESERVER1" \
    NAMESERVER2="$NAMESERVER2" \
    PROJECT_NAME="$PROJECT_NAME" \
    CONFIG_FILENAME="$CONFIG_FILENAME" \
    IMAGE_SIZE="$IMAGE_SIZE" \
    SSH_PUBKEY="$SSH_PUBKEY" \
    GENERIC_IMAGE="$GENERIC_IMAGE" \
    MINIMAL_INSTALL="$MINIMAL_INSTALL"

if [ ! "$?" = "0" ]; then
    echo $'Build failed'
    rm -rf $BUILD_DIR
    exit 1
fi

EXPECTED_EXTENSION='img'
if [[ $IMAGE_TYPE == "qemu"* ]]; then
    EXPECTED_EXTENSION='qcow2'
fi
if [[ $IMAGE_TYPE == "virtualbox"* ]]; then
    EXPECTED_EXTENSION='vdi'
fi

shopt -s nullglob
imgfiles=(build/${PROJECT_NAME}*.${EXPECTED_EXTENSION})
if [ ${#imgfiles[@]} -eq 0 ]; then
    echo $'Image was not created'
    rm -rf $BUILD_DIR
    exit 2
fi

mv build/${PROJECT_NAME}*.bz2 ${CURR_DIR}
mv build/${PROJECT_NAME}*.img ${CURR_DIR}
mv build/${PROJECT_NAME}*.sig ${CURR_DIR}
mv build/${PROJECT_NAME}*.vdi ${CURR_DIR}
mv build/${PROJECT_NAME}*.qcow2 ${CURR_DIR}
rm -rf ${BUILD_DIR}

cd ${CURR_DIR}

clear
echo $"
Image was created.

You will be able to log into it with:
"
if [[ $IMAGE_TYPE != "virtualbox"* && $IMAGE_TYPE != "qemu"* ]]; then
    echo $"    ssh $USERNAME@$DEFAULT_DOMAIN_NAME -p 2222

    Password: $PASSWORD
"
else
    if [[ $IMAGE_TYPE != "qemu"* ]]; then
        echo $"    Username: $USERNAME
    Password: $PASSWORD
"
    else
        if [[ $IMAGE_TYPE != "qemu-x86_64"* && $IMAGE_TYPE != "qemu-amd64"* ]]; then
            echo "qemu-system-i386 $(ls ${PROJECT_NAME}*.qcow2)"
        else
            echo "qemu-system-x86_64 $(ls ${PROJECT_NAME}*.qcow2)"
        fi
        echo $"
    Username: $USERNAME
    Password: $PASSWORD
"
    fi
fi
ls -lh ${PROJECT_NAME}*.img ${PROJECT_NAME}*.sig ${PROJECT_NAME}*.bz2 ${PROJECT_NAME}*.vdi ${PROJECT_NAME}*.qcow2

# record the default login credentials for later use
echo $"Username: $USERNAME
Password: $PASSWORD" > ${CURR_DIR}/${PROJECT_NAME}_login_credentials.txt
chmod 600 ${CURR_DIR}/${PROJECT_NAME}_login_credentials.txt

if [[ $IMAGE_TYPE != "virtualbox"* && $IMAGE_TYPE != "qemu"* ]]; then
    echo ''
    echo $'You can copy the image to a microSD card with:'
    echo ''
    echo "    sudo dd bs=1M if=$(ls ${PROJECT_NAME}*.img) of=/dev/sdX conv=fdatasync"
    echo ''
fi

exit 0