Initial microSD setup script
This commit is contained in:
Bob Mottram
parent
6f16937c8b
commit
3a5bafb0df
|
|
@ -0,0 +1,118 @@
|
|||
#!/bin/bash
|
||||
# This script installs the Debian image to the microSD card, and should
|
||||
# be run on your laptop/desktop with the microSD card plugged in.
|
||||
|
||||
# typically /dev/sdb or /dev/sdc, depending upon how
|
||||
# many drives there are on your system
|
||||
MICROSD_DRIVE=$1
|
||||
|
||||
# IP address of the router (gateway)
|
||||
ROUTER_IP_ADDRESS="192.168.2.1"
|
||||
|
||||
# The fixed IP address of the Beaglebone Black on your local network
|
||||
BBB_FIXED_IP_ADDRESS="192.168.2.200"
|
||||
|
||||
MICROSD_MOUNT_POINT="/media/$USER"
|
||||
|
||||
# Downloads for the Debian installer
|
||||
DOWNLOAD_LINK1="https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-08-13.tar.xz"
|
||||
DOWNLOAD_LINK2="http://ynezz.ibawizard.net/beagleboard/jessie/debian-jessie-console-armhf-2014-08-13.tar.xz"
|
||||
|
||||
|
||||
if [ ! MICROSD_DRIVE ]; then
|
||||
echo 'You need to specify a drive for the connected microSD.'
|
||||
echo 'This can most easily be found by removing the microSD, then'
|
||||
echo 'running:'
|
||||
echo ''
|
||||
echo ' ls /dev/sd*'
|
||||
echo ''
|
||||
echo 'Then plugging the microSD back in and entering the same command again'
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ ! -b ${MICROSD_DRIVE}1 ]; then
|
||||
echo "The microSD drive could not be found at ${MICROSD_DRIVE}1"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
if [ ! -d ~/freedombone ]; then
|
||||
mkdir ~/freedombone
|
||||
fi
|
||||
cd ~/freedombone
|
||||
if [ ! -f ~/freedombone/debian-jessie-console-armhf-2014-08-13.tar.xz ]; then
|
||||
wget $DOWNLOAD_LINK1
|
||||
fi
|
||||
if [ ! -f ~/freedombone/debian-jessie-console-armhf-2014-08-13.tar.xz ]; then
|
||||
# try another site
|
||||
wget $DOWNLOAD_LINK2
|
||||
if [ ! -f ~/freedombone/debian-jessie-console-armhf-2014-08-13.tar.xz ]; then
|
||||
echo 'The Debian installer could not be downloaded'
|
||||
exit 3
|
||||
fi
|
||||
fi
|
||||
sudo ./setup_sdcard.sh --mmc $MICROSD_DRIVE --dtb beaglebone
|
||||
|
||||
echo ''
|
||||
echo ''
|
||||
read -p "Eject the microSD card, re-insert it and wait a minute for it to mount, then press any key to continue... " -n1 -s
|
||||
|
||||
if [ ! -b ${MICROSD_DRIVE}1 ]; then
|
||||
echo ''
|
||||
echo "The microSD drive could not be found at ${MICROSD_DRIVE}1"
|
||||
read -p "Wait for the drive to mount then press any key... " -n1 -s
|
||||
if [ ! -b ${MICROSD_DRIVE}1 ]; then
|
||||
echo "microSD drive not found at ${MICROSD_DRIVE}1"
|
||||
exit 4
|
||||
fi
|
||||
fi
|
||||
|
||||
sudo cp $MICROSD_MOUNT_POINT/BOOT/bbb-uEnv.txt $MICROSD_MOUNT_POINT/BOOT/uEnv.txt
|
||||
|
||||
sudo sed -i '/iface eth0 inet dhcp/a\iface eth0 inet static' $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
|
||||
sudo sed -i '/iface eth0 inet static/a\ dns-nameservers 213.73.91.35 85.214.20.141' $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
|
||||
sudo sed -i "/iface eth0 inet static/a\ gateway $ROUTER_IP_ADDRESS" $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
|
||||
sudo sed -i '/iface eth0 inet static/a\ netmask 255.255.255.0' $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
|
||||
sudo sed -i "/iface eth0 inet static/a\ address $BBB_FIXED_IP_ADDRESS" $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
|
||||
sudo sed -i '/iface usb0 inet static/,/ gateway 192.168.7.1/ s/^/#/' $MICROSD_MOUNT_POINT/rootfs/etc/network/interfaces
|
||||
|
||||
sudo sed -i "s/nameserver.*/nameserver 213.73.91.35" $MICROSD_MOUNT_POINT/rootfs/etc/resolv.conf
|
||||
sudo echo 'nameserver 85.214.20.141' >> $MICROSD_MOUNT_POINT/rootfs/etc/resolv.conf
|
||||
|
||||
sync
|
||||
|
||||
clear
|
||||
echo '*** Initial microSD card setup is complete ***'
|
||||
echo ''
|
||||
echo 'The microSD card can now be removed and inserted into the Beaglebone Black.'
|
||||
echo 'Once the Beaglebone has booted then you can log in with:'
|
||||
echo ''
|
||||
echo " ssh debian@$BBB_FIXED_IP_ADDRESS"
|
||||
echo ''
|
||||
echo 'The password is "temppwd". You can then become the root user by typing:'
|
||||
echo ''
|
||||
echo ' su'
|
||||
echo ''
|
||||
echo 'Using the password "root". Change the root user password by typing:'
|
||||
echo ''
|
||||
echo ' passwd'
|
||||
echo ''
|
||||
echo 'Then create a user for the system with:'
|
||||
echo ''
|
||||
echo ' adduser [username]'
|
||||
echo ''
|
||||
echo 'Enter the command "exit" a couple of times to get back to your main system'
|
||||
echo 'then log back in as the user you just created with:'
|
||||
echo ''
|
||||
echo ' ssh [username]@$BBB_FIXED_IP_ADDRESS'
|
||||
echo ''
|
||||
echo 'and use the "su" command to become the root user again. You can then load'
|
||||
echo 'the freedombone main installation script with:'
|
||||
echo ''
|
||||
echo ' apt-get -y install git'
|
||||
echo ' git clone https://github.com/bashrc/freedombone.git'
|
||||
echo ' cd freedombone'
|
||||
echo ''
|
||||
echo 'Finally you can run the freedombone installer with:'
|
||||
echo ''
|
||||
echo ' ./install-freedombone.sh [domain] [username] [subdomain code] [variant]'
|
||||
exit 0
|
||||
|
|
@ -34,15 +34,15 @@
|
|||
# Summary
|
||||
# =======
|
||||
#
|
||||
# This script is intended to be run on the target device, which
|
||||
# is typically a Beaglebone Black.
|
||||
#
|
||||
# To be able to run this script you need to get to a condition
|
||||
# where you have Debian Jessie installed, with at least one
|
||||
# unprivileged user account and at least one subdomain created on
|
||||
# https://freedns.afraid.org/. If you're not installing on a
|
||||
# Beaglebone Black then set the variable INSTALLING_ON_BBB to "no"
|
||||
#
|
||||
# This script is intended to be run on the target device, which
|
||||
# is typically a Beaglebone Black.
|
||||
#
|
||||
# Note on dynamic dns
|
||||
# ===================
|
||||
#
|
||||
|
|
|
|||
Loading…
Reference in New Issue