From 17cd826c6b98824be6140c04ebca6644db91667c Mon Sep 17 00:00:00 2001 From: Bob Mottram Date: Sun, 12 Jan 2014 15:41:37 +0000 Subject: [PATCH] Hybserv --- beaglebone.txt | 250 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 249 insertions(+), 1 deletion(-) diff --git a/beaglebone.txt b/beaglebone.txt index c0273080..9aa563d3 100644 --- a/beaglebone.txt +++ b/beaglebone.txt @@ -1769,8 +1769,256 @@ Within the *auth* section set user = "*@192.168.1.60" - or whatever the fixed IP Save and exit, then restart the IRC server. Open ports 6666-6670 on your internet router and forward them to the BBB. +#+BEGIN_SRC: bash +cd /tmp +wget http://freedombone.uk.to/hybserv2.tar.gz +#+END_SRC + +Verify it. + +#+BEGIN_SRC: bash +md5sum hybserv2.tar.gz +12efc53c421f4919f11328e48dbc519d hybserv2.tar.gz +#+END_SRC + +Install it. + +#+BEGIN_SRC: bash +tar -xzvf hybserv2.tar.gz +cd hybserv2-* +./install.fast +#+END_SRC + +Edit the configuration. + +Make a md5 version of the password for the IRC server operator. + +#+BEGIN_SRC: bash +mkpasswd -Hmd5 +#+END_SRC + +Edit the ircd-hybrid configuration. + +#+BEGIN_SRC: bash +emacs /etc/ircd-hybrid/ircd.conf +#+END_SRC + +Enter the md5 password which you previously created within the /operator/ section. Also change /user/ to: + +#+BEGIN_SRC: bash + user = "*@*"; +#+END_SRC + +Then save and exit. + +#+BEGIN_SRC: bash +emacs /usr/local/hybserv/hybserv.conf +#+END_SRC + +Change #MD5 PASSWORD HERE# to the md5 operator password created earlier: + +#+BEGIN_SRC: bash +O:*@*:#MD5 PASSWORD HERE#:root:segj (comment out other Q: lines) +A:mynickname +N:mydomainname.com:Hybrid services +S:ConnectPassword:192.168.1.60:6667 (remove the other two services) +#+END_SRC + +Save and exit. + +Create a daemon for hybserv2. + +#+BEGIN_SRC: bash +emacs /etc/init.d/hybserv2 +#+END_SRC + +Enter the following, replacing /myusername/ with your username. + +#+BEGIN_SRC: bash +#! /bin/sh +### BEGIN INIT INFO +# Provides: hybserv +# Required-Start: $remote_fs $syslog +# Required-Stop: $remote_fs $syslog +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Hybserv2 daemon +# Description: Hybserv2 daemon +### END INIT INFO + +# Do NOT "set -e" + +# PATH should only include /usr/* if it runs after the mountnfs.sh script +PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/hybserv +DESC="Hybserv2 daemon" +NAME=hybserv +DAEMON=/usr/local/hybserv/$NAME +DAEMON_ARGS="" +PIDFILE=/var/run/ircd/$NAME.pid +SCRIPTNAME=/etc/init.d/$NAME +UID=myusername +GID=myusername + +# Exit if the package is not installed +[ -x "$DAEMON" ] || exit 0 + +# Read configuration variable file if it is present +[ -r /etc/default/$NAME ] && . /etc/default/$NAME + +# Load the VERBOSE setting and other rcS variables +. /lib/init/vars.sh + +# Define LSB log_* functions. +# Depend on lsb-base (>= 3.2-14) to ensure that this file is present +# and status_of_proc is working. +. /lib/lsb/init-functions + +# +# Function that starts the daemon/service +# +do_start() +{ + # Return + # 0 if daemon has been started + # 1 if daemon was already running + # 2 if daemon could not be started + start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --chuid $UID:$GID --test > /dev/null \ + || return 1 + start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --chuid $UID:$GID -- \ + $DAEMON_ARGS \ + || return 2 + # Add code here, if necessary, that waits for the process to be ready + # to handle requests from services started subsequently which depend + # on this one. As a last resort, sleep for some time. +} + +# +# Function that stops the daemon/service +# +do_stop() +{ + # Return + # 0 if daemon has been stopped + # 1 if daemon was already stopped + # 2 if daemon could not be stopped + # other if a failure occurred + start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME + RETVAL="$?" + [ "$RETVAL" = 2 ] && return 2 + # Wait for children to finish too if this is a daemon that forks + # and if the daemon is only ever run from this initscript. + # If the above conditions are not satisfied then add some other code + # that waits for the process to drop all resources that could be + # needed by services started subsequently. A last resort is to + # sleep for some time. + start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON + [ "$?" = 2 ] && return 2 + # Many daemons don't delete their pidfiles when they exit. + rm -f $PIDFILE + return "$RETVAL" +} + +# +# Function that sends a SIGHUP to the daemon/service +# +do_reload() { + # + # If the daemon can reload its configuration without + # restarting (for example, when it is sent a SIGHUP), + # then implement that here. + # + start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME + return 0 +} + +case "$1" in + start) + [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" + do_start + case "$?" in + 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; + 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; + esac + ;; + stop) + [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" + do_stop + case "$?" in + 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; + 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; + esac + ;; + status) + status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? + ;; + #reload|force-reload) + # + # If do_reload() is not implemented then leave this commented out + # and leave 'force-reload' as an alias for 'restart'. + # + #log_daemon_msg "Reloading $DESC" "$NAME" + #do_reload + #log_end_msg $? + #;; + restart|force-reload) + # + # If the "reload" option is implemented then remove the + # 'force-reload' alias + # + log_daemon_msg "Restarting $DESC" "$NAME" + do_stop + case "$?" in + 0|1) + do_start + case "$?" in + 0) log_end_msg 0 ;; + 1) log_end_msg 1 ;; # Old process is still running + *) log_end_msg 1 ;; # Failed to start + esac + ;; + *) + # Failed to stop + log_end_msg 1 + ;; + esac + ;; + *) + #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 + echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 + exit 3 + ;; +esac + +: +#+END_SRC + +Save and exit, then initialise the daemon, replacing /myusername/ with your username. + +#+BEGIN_SRC: bash +chown -R myusername:myusername /usr/local/hybserv +chmod u+x /etc/init.d/hybserv +update-rc.d hybserv defaults +#+END_SRC + +Now we need to restart the ircd and hybrid server to make things work: + #+BEGIN_SRC: bash service ircd-hybrid restart +service hybserv restart +#+END_SRC + +Try to connect to the IRC and identify yourself as an operator. + +In irssi: + +#+BEGIN_SRC: bash +/connect mydomainname.com + +/join #mychannel + +/msg -servername chanserv REGISTER #mychannel channelpassword + +/msg -servername chanserv set #mychannel mlock +k channelpassword #+END_SRC ** Install Gopher @@ -1967,7 +2215,7 @@ esac Save and exit. Then start the gopher service. #+BEGIN_SRC: bash -chmod +x /etc/init.d/gopher +chmod u+x /etc/init.d/gopher update-rc.d gopher defaults service gopher start #+END_SRC