Different instructions for mesh images

This commit is contained in:
Bob Mottram 2016-07-30 14:29:25 +01:00
parent 7d02a03a92
commit 1434735eb9
1 changed files with 265 additions and 254 deletions

View File

@ -119,220 +119,220 @@ INSECURE='no'
AMNESIC='no'
mesh_router_setup_script() {
# create a setup script for a mesh router
mesh_script_filename=$1
echo "MY_USERNAME=${USERNAME}" > $mesh_script_filename
echo "DEFAULT_DOMAIN_NAME=${USERNAME}" >> $mesh_script_filename
echo 'SYSTEM_TYPE=mesh' >> $mesh_script_filename
echo 'INSTALLING_ON_BBB=no' >> $mesh_script_filename
echo 'USB_DRIVE=/dev/sda1' >> $mesh_script_filename
echo 'DDNS_PROVIDER=' >> $mesh_script_filename
echo 'DDNS_USERNAME=' >> $mesh_script_filename
echo 'DDNS_PASSWORD=' >> $mesh_script_filename
echo 'DEFAULT_LANGUAGE=en_GB.UTF-8' >> $mesh_script_filename
echo 'MY_EMAIL_ADDRESS=' >> $mesh_script_filename
echo 'ENABLE_CJDNS=no' >> $mesh_script_filename
echo 'ENABLE_BATMAN=yes' >> $mesh_script_filename
echo 'ENABLE_BABEL=no' >> $mesh_script_filename
echo 'DEBIAN_REPO=' >> $mesh_script_filename
echo 'NAMESERVER1=' >> $mesh_script_filename
echo 'NAMESERVER2=' >> $mesh_script_filename
echo 'BATMAN_CELLID=any' >> $mesh_script_filename
echo 'WIFI_CHANNEL=9' >> $mesh_script_filename
# create a setup script for a mesh router
mesh_script_filename=$1
echo "MY_USERNAME=${USERNAME}" > $mesh_script_filename
echo "DEFAULT_DOMAIN_NAME=${USERNAME}" >> $mesh_script_filename
echo 'SYSTEM_TYPE=mesh' >> $mesh_script_filename
echo 'INSTALLING_ON_BBB=no' >> $mesh_script_filename
echo 'USB_DRIVE=/dev/sda1' >> $mesh_script_filename
echo 'DDNS_PROVIDER=' >> $mesh_script_filename
echo 'DDNS_USERNAME=' >> $mesh_script_filename
echo 'DDNS_PASSWORD=' >> $mesh_script_filename
echo 'DEFAULT_LANGUAGE=en_GB.UTF-8' >> $mesh_script_filename
echo 'MY_EMAIL_ADDRESS=' >> $mesh_script_filename
echo 'ENABLE_CJDNS=no' >> $mesh_script_filename
echo 'ENABLE_BATMAN=yes' >> $mesh_script_filename
echo 'ENABLE_BABEL=no' >> $mesh_script_filename
echo 'DEBIAN_REPO=' >> $mesh_script_filename
echo 'NAMESERVER1=' >> $mesh_script_filename
echo 'NAMESERVER2=' >> $mesh_script_filename
echo 'BATMAN_CELLID=any' >> $mesh_script_filename
echo 'WIFI_CHANNEL=9' >> $mesh_script_filename
}
while [[ $# > 1 ]]
do
key="$1"
key="$1"
case $key in
-h|--help)
show_help
;;
-c|--config)
shift
CONFIG_FILENAME="$1"
if [ ! -f $CONFIG_FILENAME ]; then
echo $"Config file $CONFIG_FILENAME not found"
exit 3
fi
DEFAULT_DOMAIN_NAME=$(cat $CONFIG_FILENAME | grep 'DEFAULT_DOMAIN_NAME' | awk -F '=' '{print $2}')
;;
-t|--target|--board)
shift
IMAGE_TYPE="$1"
;;
-u|--user|--username)
shift
USERNAME="$1"
;;
-p|--password)
shift
PASSWORD="$1"
if [ ${#PASSWORD} -lt $MINIMUM_PASSWORD_LENGTH ]; then
echo $"Your password chould contain at least ${MINIMUM_PASSWORD_LENGTH} characters"
exit 3628
fi
;;
--sshkey|--sshpubkey|--pubkey)
shift
SSH_PUBKEY="$1"
;;
-s|--size)
shift
IMAGE_SIZE="$1"
IMAGE_SIZE_SPECIFIED=1
;;
# Box static IP address on the LAN
--ip)
shift
BOX_IP_ADDRESS="$1"
;;
# Router IP address on the LAN
--iprouter)
shift
ROUTER_IP_ADDRESS="$1"
;;
# nameserver 1
--ns1|--nameserver1)
shift
NAMESERVER1="$1"
;;
# nameserver 2
--ns2|--nameserver2)
shift
NAMESERVER2="$1"
;;
-i|--interactive)
shift
INTERACTIVE="$1"
;;
-g|--generic)
shift
GENERIC_IMAGE="$1"
;;
--minimal)
shift
MINIMAL_INSTALL="$1"
;;
--ssh|--sshport)
shift
SSH_PORT="$1"
;;
-v|--variant)
shift
VARIANT="$1"
;;
-o|--onion)
shift
ONION_ONLY="$1"
;;
-a|--amnesic)
shift
AMNESIC="$1"
;;
-r|--repo|--repository)
shift
PROJECT_REPO="$1"
;;
-m|--mirror)
shift
MIRROR="$1"
;;
--debianonly|--basic|--minimal)
shift
DEBIAN_INSTALL_ONLY="$1"
;;
--interface|--if)
shift
WIFI_INTERFACE="$1"
;;
--ssid|--essid)
shift
WIFI_SSID="$1"
;;
--wifitype)
shift
WIFI_TYPE="$1"
;;
--wifipass|--passphrase)
shift
WIFI_PASSPHRASE="$1"
;;
--hotspot)
shift
if [[ $"$1" == $'yes' || $"$1" == $'y' ]]; then
WIFI_HOTSPOT='yes'
fi
;;
--networks)
shift
WIFI_NETWORKS_FILE="$1"
;;
--insecure)
shift
INSECURE="$1"
;;
*)
# unknown option
;;
esac
shift
case $key in
-h|--help)
show_help
;;
-c|--config)
shift
CONFIG_FILENAME="$1"
if [ ! -f $CONFIG_FILENAME ]; then
echo $"Config file $CONFIG_FILENAME not found"
exit 3
fi
DEFAULT_DOMAIN_NAME=$(cat $CONFIG_FILENAME | grep 'DEFAULT_DOMAIN_NAME' | awk -F '=' '{print $2}')
;;
-t|--target|--board)
shift
IMAGE_TYPE="$1"
;;
-u|--user|--username)
shift
USERNAME="$1"
;;
-p|--password)
shift
PASSWORD="$1"
if [ ${#PASSWORD} -lt $MINIMUM_PASSWORD_LENGTH ]; then
echo $"Your password chould contain at least ${MINIMUM_PASSWORD_LENGTH} characters"
exit 3628
fi
;;
--sshkey|--sshpubkey|--pubkey)
shift
SSH_PUBKEY="$1"
;;
-s|--size)
shift
IMAGE_SIZE="$1"
IMAGE_SIZE_SPECIFIED=1
;;
# Box static IP address on the LAN
--ip)
shift
BOX_IP_ADDRESS="$1"
;;
# Router IP address on the LAN
--iprouter)
shift
ROUTER_IP_ADDRESS="$1"
;;
# nameserver 1
--ns1|--nameserver1)
shift
NAMESERVER1="$1"
;;
# nameserver 2
--ns2|--nameserver2)
shift
NAMESERVER2="$1"
;;
-i|--interactive)
shift
INTERACTIVE="$1"
;;
-g|--generic)
shift
GENERIC_IMAGE="$1"
;;
--minimal)
shift
MINIMAL_INSTALL="$1"
;;
--ssh|--sshport)
shift
SSH_PORT="$1"
;;
-v|--variant)
shift
VARIANT="$1"
;;
-o|--onion)
shift
ONION_ONLY="$1"
;;
-a|--amnesic)
shift
AMNESIC="$1"
;;
-r|--repo|--repository)
shift
PROJECT_REPO="$1"
;;
-m|--mirror)
shift
MIRROR="$1"
;;
--debianonly|--basic|--minimal)
shift
DEBIAN_INSTALL_ONLY="$1"
;;
--interface|--if)
shift
WIFI_INTERFACE="$1"
;;
--ssid|--essid)
shift
WIFI_SSID="$1"
;;
--wifitype)
shift
WIFI_TYPE="$1"
;;
--wifipass|--passphrase)
shift
WIFI_PASSPHRASE="$1"
;;
--hotspot)
shift
if [[ $"$1" == $'yes' || $"$1" == $'y' ]]; then
WIFI_HOTSPOT='yes'
fi
;;
--networks)
shift
WIFI_NETWORKS_FILE="$1"
;;
--insecure)
shift
INSECURE="$1"
;;
*)
# unknown option
;;
esac
shift
done
if [[ $INTERACTIVE == "yes" || $INTERACTIVE == "y" || $INTERACTIVE == "Yes" ]]; then
${PROJECT_NAME}-config --minimal "$MINIMAL_INSTALL"
if [ -f freedombone.cfg ]; then
CONFIG_FILENAME=freedombone.cfg
DEFAULT_DOMAIN_NAME=$(cat $CONFIG_FILENAME | grep 'DEFAULT_DOMAIN_NAME' | awk -F '=' '{print $2}')
fi
${PROJECT_NAME}-config --minimal "$MINIMAL_INSTALL"
if [ -f freedombone.cfg ]; then
CONFIG_FILENAME=freedombone.cfg
DEFAULT_DOMAIN_NAME=$(cat $CONFIG_FILENAME | grep 'DEFAULT_DOMAIN_NAME' | awk -F '=' '{print $2}')
fi
fi
if [[ $GENERIC_IMAGE == "yes" ]]; then
USERNAME=$GENERIC_IMAGE_USERNAME
PASSWORD=$GENERIC_IMAGE_PASSWORD
USERNAME=$GENERIC_IMAGE_USERNAME
PASSWORD=$GENERIC_IMAGE_PASSWORD
fi
if [ ! $PASSWORD ]; then
# generate a random password
PASSWORD="$(openssl rand -base64 30 | cut -c1-${MINIMUM_PASSWORD_LENGTH})"
# generate a random password
PASSWORD="$(openssl rand -base64 30 | cut -c1-${MINIMUM_PASSWORD_LENGTH})"
fi
# Move any existing images into a build subdirectory
image_types=( xz img sig vdi qcow2 )
for im in "${image_types[@]}"
do
no_of_files=$(ls -afq ${CURR_DIR}/${PROJECT_NAME}*.${im} | wc -l)
if (( no_of_files > 0 )); then
if [ ! -d ${CURR_DIR}/build ]; then
mkdir ${CURR_DIR}/build
fi
mv -f ${CURR_DIR}/${PROJECT_NAME}*.${im} ${CURR_DIR}/build
fi
no_of_files=$(ls -afq ${CURR_DIR}/${PROJECT_NAME}*.${im} | wc -l)
if (( no_of_files > 0 )); then
if [ ! -d ${CURR_DIR}/build ]; then
mkdir ${CURR_DIR}/build
fi
mv -f ${CURR_DIR}/${PROJECT_NAME}*.${im} ${CURR_DIR}/build
fi
done
# Delete anything which didn't move
for im in "${image_types[@]}"
do
no_of_files=$(ls -afq ${CURR_DIR}/${PROJECT_NAME}*.${im} | wc -l)
if (( no_of_files > 0 )); then
rm -f ${CURR_DIR}/${PROJECT_NAME}*.${im}
fi
no_of_files=$(ls -afq ${CURR_DIR}/${PROJECT_NAME}*.${im} | wc -l)
if (( no_of_files > 0 )); then
rm -f ${CURR_DIR}/${PROJECT_NAME}*.${im}
fi
done
# Remove any existing login credentials file
if [ -f ${CURR_DIR}/${PROJECT_NAME}_login_credentials.txt ]; then
rm ${CURR_DIR}/${PROJECT_NAME}_login_credentials.txt
rm ${CURR_DIR}/${PROJECT_NAME}_login_credentials.txt
fi
if [ -d $TEMPBUILD_DIR ]; then
rm -rf $TEMPBUILD_DIR
rm -rf $TEMPBUILD_DIR
fi
mkdir -p $TEMPBUILD_DIR
if [ -f /usr/local/bin/$MAKEFILE ]; then
cp /usr/local/bin/$MAKEFILE $TEMPBUILD_DIR/Makefile
cp /usr/local/bin/$MAKEFILE $TEMPBUILD_DIR/Makefile
else
cp /usr/bin/$MAKEFILE $TEMPBUILD_DIR/Makefile
cp /usr/bin/$MAKEFILE $TEMPBUILD_DIR/Makefile
fi
cp -r /etc/${PROJECT_NAME}/* $TEMPBUILD_DIR
@ -341,99 +341,99 @@ chown -R $CURR_USER:$CURR_USER $TEMPBUILD_DIR
cd $TEMPBUILD_DIR
if [[ $MINIMAL_INSTALL == "yes" ]]; then
IMAGE_NAME=$'min'
IMAGE_NAME=$'min'
fi
if [[ $ONION_ONLY != "no" ]]; then
IMAGE_NAME=$'onion'
IMAGE_NAME=$'onion'
fi
if [[ $VARIANT == 'mesh' ]]; then
IMAGE_NAME=$'mesh'
# typically not much disk space is needed for a mesh node
if [ ! $IMAGE_SIZE_SPECIFIED ]; then
IMAGE_SIZE=2G
fi
IMAGE_NAME=$'mesh'
# typically not much disk space is needed for a mesh node
if [ ! $IMAGE_SIZE_SPECIFIED ]; then
IMAGE_SIZE=2G
fi
fi
if [[ $VARIANT == 'meshclient' || $VARIANT == 'meshusb' ]]; then
IMAGE_NAME=$'meshclient'
if [ ! $IMAGE_SIZE_SPECIFIED ]; then
IMAGE_SIZE=6G
fi
IMAGE_NAME=$'meshclient'
if [ ! $IMAGE_SIZE_SPECIFIED ]; then
IMAGE_SIZE=6G
fi
fi
if [[ $VARIANT == 'usb' ]]; then
IMAGE_NAME=$'usb'
IMAGE_NAME=$'usb'
fi
# append amnesic to the image name if needed
if [[ $AMNESIC != 'no' ]]; then
IMAGE_NAME="${IMAGE_NAME}-amnesic"
IMAGE_NAME="${IMAGE_NAME}-amnesic"
fi
cd $TEMPBUILD_DIR
make $IMAGE_TYPE \
MYUSERNAME="$USERNAME" \
MYPASSWORD="$PASSWORD" \
ROUTER_IP_ADDRESS="$ROUTER_IP_ADDRESS" \
BOX_IP_ADDRESS="$BOX_IP_ADDRESS" \
NAMESERVER1="$NAMESERVER1" \
NAMESERVER2="$NAMESERVER2" \
PROJECT_NAME="$PROJECT_NAME" \
CONFIG_FILENAME="$CONFIG_FILENAME" \
IMAGE_SIZE="$IMAGE_SIZE" \
SSH_PUBKEY="$SSH_PUBKEY" \
GENERIC_IMAGE="$GENERIC_IMAGE" \
MINIMAL_INSTALL="$MINIMAL_INSTALL" \
SSH_PORT="$SSH_PORT" \
ONION_ONLY="$ONION_ONLY" \
IMAGE_NAME="$IMAGE_NAME" \
PROJECT_REPO="$PROJECT_REPO" \
MIRROR="$MIRROR" \
BUILD_MIRROR="$MIRROR" \
DEBIAN_INSTALL_ONLY="$DEBIAN_INSTALL_ONLY" \
WIFI_INTERFACE="$WIFI_INTERFACE" \
WIFI_SSID="$WIFI_SSID" \
WIFI_TYPE="$WIFI_TYPE" \
WIFI_PASSPHRASE="$WIFI_PASSPHRASE" \
WIFI_HOTSPOT="$WIFI_HOTSPOT" \
WIFI_NETWORKS_FILE="$WIFI_NETWORKS_FILE" \
VARIANT="$VARIANT" \
MINIMUM_PASSWORD_LENGTH="$MINIMUM_PASSWORD_LENGTH" \
INSECURE="$INSECURE" \
AMNESIC="$AMNESIC"
MYUSERNAME="$USERNAME" \
MYPASSWORD="$PASSWORD" \
ROUTER_IP_ADDRESS="$ROUTER_IP_ADDRESS" \
BOX_IP_ADDRESS="$BOX_IP_ADDRESS" \
NAMESERVER1="$NAMESERVER1" \
NAMESERVER2="$NAMESERVER2" \
PROJECT_NAME="$PROJECT_NAME" \
CONFIG_FILENAME="$CONFIG_FILENAME" \
IMAGE_SIZE="$IMAGE_SIZE" \
SSH_PUBKEY="$SSH_PUBKEY" \
GENERIC_IMAGE="$GENERIC_IMAGE" \
MINIMAL_INSTALL="$MINIMAL_INSTALL" \
SSH_PORT="$SSH_PORT" \
ONION_ONLY="$ONION_ONLY" \
IMAGE_NAME="$IMAGE_NAME" \
PROJECT_REPO="$PROJECT_REPO" \
MIRROR="$MIRROR" \
BUILD_MIRROR="$MIRROR" \
DEBIAN_INSTALL_ONLY="$DEBIAN_INSTALL_ONLY" \
WIFI_INTERFACE="$WIFI_INTERFACE" \
WIFI_SSID="$WIFI_SSID" \
WIFI_TYPE="$WIFI_TYPE" \
WIFI_PASSPHRASE="$WIFI_PASSPHRASE" \
WIFI_HOTSPOT="$WIFI_HOTSPOT" \
WIFI_NETWORKS_FILE="$WIFI_NETWORKS_FILE" \
VARIANT="$VARIANT" \
MINIMUM_PASSWORD_LENGTH="$MINIMUM_PASSWORD_LENGTH" \
INSECURE="$INSECURE" \
AMNESIC="$AMNESIC"
if [ ! "$?" = "0" ]; then
echo $'Build failed'
rm -rf $TEMPBUILD_DIR
exit 1
echo $'Build failed'
rm -rf $TEMPBUILD_DIR
exit 1
fi
EXPECTED_EXTENSION='xz'
if [[ $IMAGE_TYPE == "qemu"* ]]; then
EXPECTED_EXTENSION='qcow2'
EXPECTED_EXTENSION='qcow2'
fi
if [[ $IMAGE_TYPE == "virtualbox"* ]]; then
EXPECTED_EXTENSION='vdi'
EXPECTED_EXTENSION='vdi'
fi
shopt -s nullglob
imgfiles=(build/${PROJECT_NAME}*.${EXPECTED_EXTENSION})
if [ ${#imgfiles[@]} -eq 0 ]; then
echo $'Image was not created'
rm -rf $TEMPBUILD_DIR
exit 2
echo $'Image was not created'
rm -rf $TEMPBUILD_DIR
exit 2
fi
# Move images from temporary directory to the current directory
for im in "${image_types[@]}"
do
no_of_files=$(ls -afq build/${PROJECT_NAME}*.${im} | wc -l)
if (( no_of_files > 0 )); then
mv build/${PROJECT_NAME}*.${im} ${CURR_DIR}/
sudo chown ${CURR_USER}:${CURR_USER} ${CURR_DIR}/*.${im}
fi
no_of_files=$(ls -afq build/${PROJECT_NAME}*.${im} | wc -l)
if (( no_of_files > 0 )); then
mv build/${PROJECT_NAME}*.${im} ${CURR_DIR}/
sudo chown ${CURR_USER}:${CURR_USER} ${CURR_DIR}/*.${im}
fi
done
# Remove the temporary directory
@ -442,38 +442,45 @@ rm -rf ${TEMPBUILD_DIR}
cd ${CURR_DIR}
clear
echo $"
if [[ $VARIANT != 'meshclient' && $VARIANT != 'meshusb' && $VARIANT != 'mesh' ]]; then
echo $"
Image was created.
You will be able to log into it with:
"
if [[ $IMAGE_TYPE != "virtualbox"* && $IMAGE_TYPE != "qemu"* ]]; then
echo $" ssh $USERNAME@$DEFAULT_DOMAIN_NAME -p $SSH_PORT
if [[ $IMAGE_TYPE != "virtualbox"* && $IMAGE_TYPE != "qemu"* ]]; then
echo $" ssh $USERNAME@$DEFAULT_DOMAIN_NAME -p $SSH_PORT
Password: $PASSWORD
"
else
if [[ $IMAGE_TYPE != "qemu"* ]]; then
echo $" Username: $USERNAME
else
if [[ $IMAGE_TYPE != "qemu"* ]]; then
echo $" Username: $USERNAME
Password: $PASSWORD
"
else
if [[ $IMAGE_TYPE != "qemu-x86_64"* && $IMAGE_TYPE != "qemu-amd64"* ]]; then
echo "qemu-system-i386 -m ${VM_MEMORY} $(ls ${PROJECT_NAME}*.qcow2)"
else
echo "qemu-system-x86_64 -m ${VM_MEMORY} $(ls ${PROJECT_NAME}*.qcow2)"
fi
echo $"
else
if [[ $IMAGE_TYPE != "qemu-x86_64"* && $IMAGE_TYPE != "qemu-amd64"* ]]; then
echo "qemu-system-i386 -m ${VM_MEMORY} $(ls ${PROJECT_NAME}*.qcow2)"
else
echo "qemu-system-x86_64 -m ${VM_MEMORY} $(ls ${PROJECT_NAME}*.qcow2)"
fi
echo $"
Username: $USERNAME
Password: $PASSWORD
"
fi
fi
fi
else
echo $"
Image was created.
"
fi
ls -lh ${PROJECT_NAME}*.img ${PROJECT_NAME}*.sig ${PROJECT_NAME}*.xz ${PROJECT_NAME}*.vdi ${PROJECT_NAME}*.qcow2
# Remove the mesh script after use
if [[ $VARIANT == "mesh"* ]]; then
rm -f $CONFIG_FILENAME
rm -f $CONFIG_FILENAME
fi
# record the default login credentials for later use
@ -482,12 +489,16 @@ Password: $PASSWORD" > ${CURR_DIR}/${PROJECT_NAME}_login_credentials.txt
chmod 600 ${CURR_DIR}/${PROJECT_NAME}_login_credentials.txt
if [[ $IMAGE_TYPE != "virtualbox"* && $IMAGE_TYPE != "qemu"* ]]; then
echo ''
echo $'You can copy the image to a microSD card with:'
echo ''
echo " unxz -k ${PROJECT_NAME}*.img.xz"
echo " sudo dd bs=1M if=${PROJECT_NAME}*.img of=/dev/sdX conv=fdatasync"
echo ''
echo ''
if [[ $VARIANT != 'meshclient' && $VARIANT != 'meshusb' ]]; then
echo $'You can copy the image to a microSD card with:'
else
echo $'You can copy the image to a USB drive with:'
fi
echo ''
echo " unxz -k ${PROJECT_NAME}*.img.xz"
echo " sudo dd bs=1M if=${PROJECT_NAME}*.img of=/dev/sdX conv=fdatasync"
echo ''
fi
exit 0