#+KEYWORDS: freedombox, debian, beaglebone, red matrix, email, web server, home server, internet, censorship, surveillance, social network, irc, jabber
#+DESCRIPTION: Turn the Beaglebone Black into a personal communications server
Mesh networks are useful as a quick way to make a fully decentralised communications system which is not connected to the internet. Think festivals, hacker conferences, onboard ships at sea, disaster/war zones, small business internal office communications, protests, remote areas of the world, scientific expeditions and off-world space colonies. All the cool stuff. The down side is that you can't access any internet content. The upside is that you can securely communicate with anyone on the local mesh. No ISPs. No payments or subscriptions beyond the cost of obtaining the hardware. Systems need to be within wifi range of each other for the mesh to be created. It can be an ultra-convenient way to do purely local communications.
If you don't have Atheros or free software compatible wifi adapter then you can include proprietary wifi drivers which will work with most laptops. This is *NOT RECOMMENDED* because proprietary drivers are unsupportable and may contain either malware or be exploitable in a way which can't be fixed. However, if you're in an emergency and don't have any Atheros or free software wifi USB dongles then you can use the following command to make the image:
This takes a while. Maybe an hour or so, depending on the speed of your system and the internets. The good news though is that once created you can use the resulting image any number of times, and you don't need to trust some pre-built image.
You can now copy the image to the USB thumb drive, replacing *sdX* with the identifier of the USB thumb drive. Don't include any numbers (so for example use *sdc* instead of *sdc1*).
And wait. Again it will take a while to copy over. When that's done plug it into the laptop or netbook which you want to use on the mesh, power on and set the BIOS to boot from the USB stick.
On first boot you'll be asked to set a username, and then you can open the chat client and select the *users* icon to show the Tox IDs for other users on the mesh. When folks join they will be announced.
Rinse, repeat, for any number of laptops that you want to get onto the mesh or to build out coverage within an area. There are no servers. Just peer-to-peer communications routed through the network which are end-to-end secure after a friend request is accepted. By default the chat client doesn't log anything.
You can also use single board computers (SBCs) such as the BeagleBone Black to make mesh routers which can be bolted to walls or the sides of buildings and consume minimal electrical power, so could be solar or battery powered for short term events such as festivals. To do that use the following command to make the image:
