214 lines
8.4 KiB
Plaintext
214 lines
8.4 KiB
Plaintext
|
|
ngIRCd - Next Generation IRC Server
|
|
http://ngircd.barton.de/
|
|
|
|
(c)2001-2012 Alexander Barton and Contributors.
|
|
ngIRCd is free software and published under the
|
|
terms of the GNU General Public License.
|
|
|
|
-- Protocol.txt --
|
|
|
|
|
|
I. Compatibility
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
The ngIRCd implements the Internet Relay Chat (IRC) protocol version 2.10
|
|
as defined in RFC ("request for comment") 1459 and 2810-2813. These (and
|
|
probably further relevant RFCs) are listed in doc/RFC.txt.
|
|
|
|
Unfortunately, even the "original" ircd doesn't follow these specifications
|
|
in all details. But because the ngIRCd should be a fully compatible
|
|
replacement for this server ("ircd") it tries to emulate these differences.
|
|
|
|
If you don't like this behavior please ./configure the ngIRCd using the
|
|
"--enable-strict-rfc" command line option. But keep in mind: not all IRC
|
|
clients are compatible with a server configured that way, some can't even
|
|
connect at all! Therefore this option usually isn't desired for "normal
|
|
server operation".
|
|
|
|
|
|
II. The IRC+ Protocol
|
|
~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Starting with version 0.5.0, the ngIRCd extends the original IRC protocol
|
|
as defined in RFC 2810-2813. This enhanced protocol is named "IRC+". It is
|
|
backwards compatible to the "plain" IRC protocol and will only be used by
|
|
the ngIRCd if it detects that the peer supports it as well.
|
|
|
|
The "PASS" command is used to detect the protocol and peer versions see
|
|
RFC 2813 (section 4.1.1) and below.
|
|
|
|
|
|
II.1 Register new server link
|
|
|
|
Command: PASS
|
|
Parameters: <password> <version> <flags> [<options>]
|
|
Used by: servers only (with these parameters)
|
|
|
|
<password> is the password for this new server link as defined in the server
|
|
configuration which is sent to the peer or received from it.
|
|
|
|
<version> consists of two parts and is at least 4, at most 14 characters
|
|
long: the first four bytes contain the IRC protocol version number, whereas
|
|
the first two bytes represent the major version, the last two bytes the
|
|
minor version (the string "0210" indicates version 2.10, e.g.).
|
|
|
|
The following optional(!) 10 bytes contain an implementation-dependent
|
|
version number. Servers supporting the IRC+ protocol as defined in this
|
|
document provide the string "-IRC+" here.
|
|
|
|
Example for <version>: "0210-IRC+".
|
|
|
|
<flags> consists of two parts separated with the character "|" and is at
|
|
most 100 bytes long. The first part contains the name of the implementation
|
|
(ngIRCd sets this to "ngircd", the original ircd to "IRC", e.g.). The second
|
|
part is implementation-dependent and should only be parsed if the peer
|
|
supports the IRC+ protocol as well. In this case the following syntax is
|
|
used: "<serverversion>[:<serverflags>]".
|
|
|
|
<serverversion> is an ASCII representation of the clear-text server version
|
|
number, <serverflags> indicates the supported IRC+ protocol extensions (and
|
|
may be empty!).
|
|
|
|
The following <serverflags> are defined at the moment:
|
|
|
|
- C: The server supports the CHANINFO command.
|
|
|
|
- L: INVITE- and BAN-lists should be synchronized between servers: if the
|
|
peer understands this flag, it will send "MODE +I" and "MODE +b"
|
|
commands after the server link has been established.
|
|
|
|
- H: The server supports the "enhanced server handshake", see section II.2
|
|
for a detailed description.
|
|
|
|
- o: IRC operators are allowed to change channel- and channel-user-modes
|
|
even if they aren't channel-operator of the affected channel.
|
|
|
|
- S: The server supports the SERVICE command (on this link).
|
|
|
|
- Z: Compressed server links are supported by the server.
|
|
|
|
Example for a complete <flags> string: "ngircd|0.7.5:CZ".
|
|
|
|
The optional parameter <options> is used to propagate server options as
|
|
defined in RFC 2813, section 4.1.1.
|
|
|
|
|
|
II.2 Enhanced Server Handshake
|
|
|
|
The "enhanced server handshake" is used when both servers support this IRC+
|
|
extension, which is indicated by the 'H' flag in the <serverflags> sent with
|
|
the PASS command, see section II.1.
|
|
|
|
It basically means, that after exchanging the PASS and SERVER commands the
|
|
server is not registered in the network (as usual), but that IRC numerics
|
|
are exchanged until the numeric 376 (ENDOFMOTD) is received. Afterwards the
|
|
peer is registered in the network as with the regular IRC protocol.
|
|
|
|
A server implementing the enhanced server handshake (and indicating this
|
|
using 'H' in the <serverflags>) MUST ignore all unknown numerics to it
|
|
silently.
|
|
|
|
In addition, such a server should at least send the numeric 005 (ISUPPORT)
|
|
to its peer, containing the following information. Syntax: <key>=<value>,
|
|
one token per IRC parameter. If the server has to send more than 12 token
|
|
it must send separate ISUPPORT numerics (this is a limitation of the IRC
|
|
protocol which allows at max 15 arguments per command).
|
|
|
|
- NICKLEN: Maximum nickname length. Default: 9.
|
|
- CASEMAPPING: Case mapping used for nick- and channel name comparing.
|
|
Default: "ascii", the chars [a-z] are lowercase of [A-Z].
|
|
- PREFIX: List of channel modes a person can get and the respective prefix
|
|
a channel or nickname will get in case the person has it. The order of the
|
|
modes goes from most powerful to least powerful. Default: "(ov)@+"
|
|
- CHANTYPES: Supported channel prefixes. Default: "#".
|
|
- CHANMODES: List of channel modes for 4 types, separated by comma (","):
|
|
Mode that adds or removes a nick or address to a list, mode that changes
|
|
a setting (both have always has a parameter), mode that changes a setting
|
|
and only has a parameter when set, and mode that changes a setting and
|
|
never has a parameter. For example "bI,k,l,imnPst".
|
|
- CHANLIMIT: Maximum number of channels allowed to join by channel prefix,
|
|
for example "#:10".
|
|
|
|
Please see <http://www.irc.org/tech_docs/005.html> for details.
|
|
|
|
The information exchanged using ISUPPORT can be used to detect configuration
|
|
incompatibilities (different maximum nick name length, for example) and
|
|
therefore to disconnect the peer prior to registering it in the network.
|
|
|
|
|
|
II.3 Exchange channel-modes, topics, and persistent channels
|
|
|
|
Command: CHANINFO
|
|
Parameters: <channel> +<modes> [[<key> <limit>] <topic>]
|
|
Used by: servers only
|
|
|
|
CHANINFO is used by servers to inform each other about a channel: its
|
|
modes, channel key, user limits and its topic. The parameter combination
|
|
<key> and <limit> is optional, as well as the <topic> parameter, so that
|
|
there are three possible forms of this command:
|
|
|
|
CHANINFO <channel> +<modes>
|
|
CHANINFO <channel> +<modes> <topic>
|
|
CHANINFO <channel> +<modes> <key> <limit> <topic>
|
|
|
|
If the channel already exists on the server receiving the CHANINFO command,
|
|
it only adopts the <modes> (or the <topic>) if there are no modes (or topic)
|
|
already set. It there are already values set the server ignores the
|
|
corresponding parameter.
|
|
|
|
If the channel doesn't exists at all it will be created.
|
|
|
|
The parameter <key> must be ignored if a channel has no key (the parameter
|
|
<modes> doesn't list the "k" channel mode). In this case <key> should
|
|
contain "*" because the parameter <key> is required by the CHANINFO syntax
|
|
and therefore can't be omitted. The parameter <limit> must be ignored when
|
|
a channel has no user limit (the parameter <modes> doesn't list the "l"
|
|
channel mode). In this case <limit> should be "0".
|
|
|
|
|
|
II.4 Update webchat/proxy client information
|
|
|
|
Command: WEBIRC
|
|
Parameters: <password> <username> <hostname> <ip-address>
|
|
Used by: unregistered clients only
|
|
|
|
The WEBIRC command is used by some Web-to-IRC gateways to set the correct
|
|
user name and host name of users instead of their own. It must be the very
|
|
first command sent to the server, even before USER and NICK commands!
|
|
|
|
The <password> must be set in the server configuration file to prevent
|
|
unauthorized clients to fake their identity; it is an arbitrary string.
|
|
|
|
|
|
II.5 Client character encoding conversion
|
|
|
|
Command: CHARCONV
|
|
Parameters: <client-charset>
|
|
Used by: registered clients
|
|
Replies: RPL_IP_CHARCONV_MSG, ERR_IP_CHARCONV_MSG
|
|
|
|
|
|
III. Numerics used by IRC+ Protocol
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
The IRC+ protocol uses numerics in the range 800-899 which aren't used by
|
|
RFC 2812 and hopefully don't clash with other implementations ...
|
|
|
|
Numerics 800-849 are used for status and success messages, and numerics
|
|
850-899 are failure and error messages.
|
|
|
|
|
|
III.1 IRC+ status and success numerics
|
|
|
|
800 - RPL_IP_CHARCONV_MSG
|
|
%1 :Client encoding set"
|
|
|
|
%1 client character set
|
|
|
|
|
|
III.2 IRC+ failure and error numerics
|
|
|
|
850 - ERR_IP_CHARCONV_MSG
|
|
:Can't initialize client encoding
|