ngircd-tor/NEWS

691 lines
37 KiB
Plaintext

ngIRCd - Next Generation IRC Server
http://ngircd.barton.de/
(c)2001-2013 Alexander Barton and Contributors.
ngIRCd is free software and published under the
terms of the GNU General Public License.
-- NEWS --
ngIRCd 21
- Implement a new configuration option "IncludeDir" in the "[Options]"
section that can be used to specify a directory which can contain
further configuration files and configuration file snippets matching
the pattern "*.conf". These files are read in after the main server
configuration file ("ngircd.conf" by default) has been read in and
parsed. The default is "$SYSCONFDIR/ngircd.conf.d", so that it is
possible to adjust the configuration only by placing additional files
into this directory. (Closes bug #157)
- Add Travis-CI configuration file (".travis.yml") to project.
- ngIRCd now accepts user names including "@" characters, saves the
unmodified name for authentication but stores only the part in front
of the "@" character as "IRC user name". And the latter is how
ircd2.11, Bahamut, and irc-seven behave as well. (Closes bug #155)
- Lots of IRC "information functions" like ADMIN, INFO, ... now accept
server masks and names of connected users (in addition to server names)
for specifying the target server of the command. (Closes bug #153)
- Implement a new configuration option "IdleTimeout" in the "[Limits]"
section of the configuration file which can be used to set a timeout
in seconds after which the whole daemon will shutdown when no more
connections are left active after handling at least one client.
The default is 0, "never".
This can be useful for testing or when ngIRCd is started using "socket
activation" with systemd(8), for example.
- Implement support for systemd(8) "socket activation".
- Enable WHOIS to display information about IRC Services using the new
numeric 310(RPL_WHOISSERVICE) This numeric is used for this purpose by
InspIRCd, for example -- but as usual, other numerics are in use, too,
like 613 in UltimateIRCd ...
Please note that neither the Operator (+o) not the "bot status" (+B)
of an IRC service id displayed in the output.
- Update systemd(8) example configuration files in ./contrib/ directory:
the "ngircd.service" file now uses the "forking" service type which
enhances the log messages shown by "systemctl status ngircd.service",
and the new "ngircd.socket" file configures a systemd socket that
configures a socket for ngIRCd and launches the daemon on demand.
- Enhance help system and the HELP command: now a "help text file" can be
set using the new configuration option "HelpFile" ("global" section),
which is read in and parsed on server startup and configuration reload,
and then is used to output individual help texts to specific topics.
Please see the file ./doc/Commands.txt for details.
ngIRCd 20.2 (2013-02-15)
- This release is a bugfix release only, without new features.
- Security: Fix a denial of service bug in the function handling KICK
commands that could be used by arbitrary users to to crash the daemon
(CVE-2013-1747).
ngIRCd 20.1 (2013-01-02)
- This release is a bugfix release only, without new features.
ngIRCd 20 (2012-12-17)
- Allow user names ("INDENT") up to 20 characters when ngIRCd has not
been configured for "strict RFC mode". This is useful if you are using
external (PAM) authentication mechanisms that require longer user names.
Patch suggested by Brett Smith <brett@w3.org>, see
<http://arthur.barton.de/pipermail/ngircd-ml/2012-October/000579.html>.
ngIRCd 20~rc2 (2012-12-02)
- Rework cloaked hostname handling and implement the "METADATA cloakhost"
subcommand: Now ngIRCd uses two fields internally, one to store the
"real" hostname and one to save the "cloaked" hostname. This allows
"foreign servers" (aka "IRC services") to alter the real and cloaked
hostnames of clients without problems, even when the user itself issues
additional "MODE +x" and "MODE -x" commands.
ngIRCd 20~rc1 (2012-11-11)
- Update doc/Services.txt: describe the upcoming version of Anope 1.9.8,
then including a protocol module for ngIRCd. And remove our own patches
in ./contrib/Anope because they aren't supported any more ...
- Implement new "METADATA" command which can be used by remote servers
and IRC services to update client metadata like the client info text
("real name"), user name, and hostname, and use this command to
configure an cloaked hostname (user mode "+x") on remote servers:
This prevents "double cloaking" of hostnames and even cloaked
hostnames are in sync on all servers supporting "METADATA" now.
- Implement new IRC "SVSNICK" command to allow remote servers (and IRC
services) to change nicknames of already registered users. The SVSNICK
command itself doesn't change the nickname, but it becomes forwarded
to the server to which the user is connected to. And then this server
initiates the real nickname changing using regular NICK commands.
This allows to run mixed networks with old servers not supporting the
SVSNICK command, because SVSNICK commands for nicknames on such servers
are silently ignored and don't cause a desynchronization of the network.
- New configuration option "MaxListSize" to configure the maximum number
of channels returned by a LIST command. The default is 100, as before.
- Implement user mode "b", "block messages": when a user has set mode "b",
all private messages and notices to this user are blocked if they don't
originate from a registered user, an IRC Op, server or service. The
originator gets an error numeric sent back in this case,
ERR_NONONREG_MSG (486), which is used by UnrealIRCd, too. (Closes #144)
- Implement channel mode "V" (invite disallow): If the new channel mode
"V" is set, the INVITE command becomes invalid and all clients get the
new ERR_NOINVITE_MSG (518) reply. (Closes #143)
- Implement channel mode "Q" and user mode "q": Both modes protect users
from channel kicks: only IRC operators and servers can kick users having
mode "q" or in channels with mode "Q". (Closes #141)
- Allow users to "cloak" their hostname only when the configuration
variable "CloakHostModeX" (introduced in 19.2) is set. Otherwise, only
IRC operators, other servers, and services are allowed to set the user
mode "+x": this prevents regular users from changing their hostmask to
the name of the IRC server itself, which confused quite a few people ;-)
(Closes #133)
- New configuration option "OperChanPAutoOp": If disabled, IRC operators
don't become channel operators in persistent channels when joining.
Enabled by default, which has been the behavior of ngIRCd up to this
patch. (Closes #135)
- Allow IRC operators to see secret (+s) channels in LIST command as long
as the "MorePrivacy" configuration option isn't enabled in the
configuration file. (Closes #136)
- Implement new (optional) IRC+ "CHARCONV" command to set a client
character set that the server translates all messages to/from UTF-8.
This feature requires the "libiconv" library and must be enabled using
the new "--with-iconv" option of the ./configure script. See
doc/Protocol.txt for details. (Closes #109)
- Implement user mode "B" ("Bot flag"): it is settable and unsettable by
every (non-restricted) client. This is how Unreal and InspIRCd do
behave, and so do we :-)
- Implement channel mode "M": Only the server, identified users and IRC
operators are able to talk in such a channel.
- Block nicknames that are reserved for services and are defined using the
configuration variable "ServiceMask" in "Server" blocks; And this
variable now can handle more than one mask separated by commas.
- Implemented XOP channel user modes: "Half Op" ("+h", prefix "%") can set
the channel modes +imntvIbek and kick all +v and normal users; "Admin"
("+a", prefix "&") can set channel modes +imntvIbekoRsz and kick all +o,
+h, +v and normal users; and "Owner" ("+q", prefix "~") can set channel
modes +imntvIbekoRsz and kick all +a, +o, +h, +v and normal users.
- Implement hashed cloaked hostnames for both the "CloakHost" and
"CloakHostModeX" configuration options: now the admin can use the new
'%x' placeholder to insert a hashed version of the clients hostname,
and the new configuration option "CloakHostSalt" defines the salt for
the hash function. When "CloakHostSalt" is not set (the default), a
random salt will be generated after each server restart.
ngIRCd Release 19.2 (2012-06-19)
ngIRCd 19.2~rc1 (2012-06-13)
- New configuration option "CloakHostModeX" to configure the hostname
that gets used for IRC clients which have user mode "+x" enabled.
Up to now, the name of the IRC server itself has been used for this,
which still is the default when "CloakHostModeX" isn't set.
- Add instructions for setting up Atheme IRC services.
- Implement support for IRC capability handling, the new "CAP" command,
and capablity "multi-prefix" which allows both the NAME and WHO command
handlers to return more than one "class prefix" to the client.
ngIRCd Release 19.1 (2012-03-19)
- Really include _all_ patches to build the Anope module into the
distribution archive ... ooops!
ngIRCd Release 19 (2012-02-29)
ngIRCd 19~rc1 (2012-02-12)
- Update preliminary ngIRCd protocol module for Anope 1.9.6, which now
is the only supported version.
- New numeric RPL_WHOISHOST_MSG(378), which returns the DNS host name
(if available) and the IP address of a client in the WHOIS reply.
Only the user itself and local IRC operators get this numeric.
- Implement channel exception list (mode 'e'). This allows a channel
operator to define exception masks that allow users to join the
channel even when a "ban" would match and prevent them from joining:
the exception list (e) overrides the ban list (b).
- Implement user mode 'C': If the target user of a PRIVMSG or NOTICE
command has the user mode 'C' set, it is required that both sender
and receiver are on the same channel. This prevents private flooding
by completely unknown clients.
- New RPL_WHOISREGNICK_MSG(307) numeric in WHOIS command replies: it
indicates if a nickname is registered (if user mode 'R' set).
- Limit channel invite, ban, and exception lists to 50 entries and fix
duplicate check and error messages when adding already listed entries
or deleting no (longer) existing ones.
- Limit the number of list items in the reply of LIST (100), WHO (25),
WHOIS (10), and WHOWAS (25) commands.
- Limit the MODE command to handle a maximum number of 5 channel modes
that require an argument (+Ibkl) per call and report this number
in the ISUPPORT(005) numeric: "MODES=5".
- LINKS command: support <mask> parameter to limit the reply.
- Add 1 second penalty for every further target on PRIVMSG/NOTICE
commands: this reduces the possibility of flooding channels with
commands like "PRIVMSG/NOTICE #a,#n,#c,... :message" a little bit.
Problem noticed by Cahata, thanks!
- New configuration option "PAMIsOptional": when set, clients not
sending a password are still allowed to connect: they won't become
"identified" and keep the "~" character prepended to their supplied
user name. See "man 5 ngircd.conf" for details.
- Fixed handling of WHO commands. This fixes two bugs: "WHO <nick>"
returned nothing at all if the user was "+i" (reported by Cahata,
thanks) and "WHO <nick|nickmask>" returned channel names instead
of "*" when the user was member of a (visible) channel.
- LUSERS reply: only count channels that are visible to the requesting
client, so the existence of secret channels is no longer revealed by
using LUSERS. Reported by Cahata, thanks!
- Unknown user and channel modes no longer stop the mode parser, but
are simply ignored. Therefore modes after the unknown one are now
handled. This is how ircd2.10/ircd2.11/ircd-seven behave, at least.
Reported by Cahata, thanks!
- Implement IRC commands "GLINE" and "KLINE" to ban users. G-Lines are
synchronized between server on peering, K-Lines are local only.
If you use "*!<user>@<host>" or "*!*@<host>" masks, these connections
are blocked even before the user is fully logged in (before PASS,
NICK, and USER commands have been processed) and before the child
processes for authentication are forked, so resource usage is smaller.
- Added doc/Modes.txt: document modes supported by ngIRCd.
- Implement user mode "R": indicates that the nickname of this user
is "registered". This mode isn't handled by ngIRCd itself, but must
be set and unset by IRC services like Anope.
- Implement channel mode "R": only registered users (having the user
mode "R" set) are allowed to join this channel.
- Test suite: bind to loopback (127.0.0.1) interface only.
- Handle unknown user and channel modes: these modes are saved and
forwarded to other servers, but ignored otherwise.
- Handle channel user modes 'a', 'h', and 'q' from remote servers.
These channel user modes aren't used for anything at the moment,
but ngIRCd knows that these three modes are "channel user modes"
and not "channel modes", that is that these modes take an "nickname"
argument. Like unknown user and channel modes, these modes are saved
and forwarded to other servers, but ignored otherwise.
ngIRCd Release 18 (2011-07-10)
- Add preliminary ngIRCd protocol module for Anope 1.9 to contrib/Anope/.
ngIRCd 18~rc2 (2011-06-29)
- GnuTLS: use 1024 bits as minimum size of the DH prime. This enables
ngIRCd to accept incoming connections from other servers and clients
that "only" use at least 1024 bits again, like ngIRCd 17 did (and no
longer requires 2048 bits for incoming connections).
ngIRCd 18~rc1 (2011-06-27)
- New configuration option "MorePrivacy" to "censor" some user information.
When enabled, signon time and idle time is left out. Part and quit
messages are made to look the same. WHOWAS requests are silently dropped.
All of this is useful if one wish to conceal users that access the ngircd
servers from TOR or I2P.
- New configuration option "ScrubCTCP" to scrub incoming CTCP commands. If
activated, the server silently drops incoming CTCP requests from both
other servers and from users. The server that scrubs CTCP will not forward
the CTCP requests to other servers in the network either, which can spell
trouble if not every oper knows about the CTCP-scrubbing. Scrubbing CTCP
commands also means that it is not possible to send files between users.
There is one exception to the CTCP scrubbing performed: ACTION ("/me
commands") requests are not scrubbed.
- Restructure ngIRCd configuration file: introduce new [Limits], [Options],
and [SSL] sections. The intention of this restructuring is to make the
[Global] section much cleaner, so that it only contains variables that
most installations must adjust to the local requirements. All the optional
variables are moved to [Limits], for configurable limits and timers of
ngIRCd, and [Options], for optional features. All SSL-related variables
are moved to [SSL] and the "SSL"-prefix is stripped. The old variables in
the [Global] section are deprecated now, but are still recognized.
=> Don't forget to check your configuration, use "ngircd --configtest"!
- New documentation "how to contribute": doc/Contributing.txt.
- Avoid needlessly scary 'buffer overflow' messages: When the write buffer
space grows too large, ngIRCd has to disconnect the client to avoid
wasting too much memory, which is logged with a scary 'write buffer
overflow' message. Change this to a more descriptive wording.
- New configuration option "RequireAuthPing": PING-PONG on login. When
enabled, this configuration option lets ngIRCd send a PING with an numeric
"token" to clients logging in; and it will not become registered in the
network until the client responds with the correct PONG.
- New configuration option "NoticeAuth": send NOTICE AUTH on connect. When
active, ngircd will send "NOTICE AUTH" messages on client connect time
like e.g. snircd (QuakeNet) does.
- Add support for up to 3 targets in WHOIS queries, also allow up to one
wildcard query from local hosts. Follows ircd 2.10 implementation rather
than RFC 2812. At most 10 entries are returned per wildcard expansion.
- ngircd.conf(5) manual page: describe types of configuration variables
(booleans, text strings, integer numbers) and add type information to each
variable description.
- Terminate incoming connections on HTTP commands "GET" and "POST".
- New configuration option "CloakHost": when set, this host name is used for
every client instead of the real DNS host name (or IP address).
- New configuration option "CloakUserToNick": when enabled, ngIRCd sets
every clients' user name to their nickname and hides the user name
supplied by the IRC client.
- Make write buffers bigger, but flush early. Before this change, a client
got disconnected if the buffer flushing at 4k failed, now regular clients
can store up to 32k and servers up 64k even if flushing is not possible at
the moment. This enhances reliability on slow links.
- Allow "Port = 0" in [Server] blocks. Port number 0 marks remote servers
that try to connect to this daemon, but where this daemon never tries to
establish a connection on its own: only incoming connections are allowed.
- Enable WHOIS command to return information about services.
- Implement channel mode 'O': "IRC operators only". This channel mode is
used on DALnet (bahamut), for example.
- Remove support for ZeroConf/Bonjour/Rendezvous service registration
including the "[No]ZeroConf" configuration option.
- Deprecate NoXX-Options in ngircd.conf and move new variants into our new
[Options] section: 'NoDNS=no' => 'DNS=yes', 'NoIdent=no' => 'Ident=yes',
'NoPAM=no' => 'PAM=yes', and 'NoZeroConf=no' => 'ZeroConf=yes' (and
vice-versa). The defaults are adjusted accordingly and the old variables
in [Global] are still accepted, so there is no functional change.
ngIRCd Release 17.1 (2010-12-19)
- Don't log critical (or worse) messages to stderr
- Remove "error file" when compiled with debug code enabled
- New numeric 329: get channel creation time on "MODE #chan" commands
ngIRCd Release 17 (2010-11-07)
- doc: change path names in sample-ngircd.conf depending on sysconfdir
ngIRCd 17~rc2 (2010-10-25)
- Generate ngIRCd version number from GIT tag.
- Make sourcecode compatible with ansi2knr again. This allows to compile
ngIRCd using a pre-ANSI K&R C compiler again.
ngIRCd 17~rc1 (2010-10-11)
- New configuration option "NoZeroConf" to disable service registration at
runtime even if ngIRCd is compiled with support for ZeroConf (e.g. using
Howl, Avahi or on Mac OS X).
- New configuration option "SyslogFacility" to define the syslog "facility"
(the "target"), to which ngIRCd should send its log messages.
Possible values are system dependant, but most probably "auth", "daemon",
"user" and "local1" through "local7" are possible values; see syslog(3).
Default is "local5" for historical reasons.
- Dump the "internal server state" (configured servers, established
connections and known clients) to the console or syslog when receiving
the SIGUSR2 signal and debug mode is enabled.
- Enable the daemon to disable and enable "debug mode" on runtime using
signal SIGUSR1, when debug code is compiled in, not only on startup
using the command line parameters.
- Implement user mode "x": host name cloaking (closes: #102).
- Change MOTD file handling: ngIRCd now caches the contens of the MOTD
file, so the daemon now requires a HUP signal or REHASH command to
re-read the MOTD file when its content changed.
- Allow IRC ops to change channel modes even without OperServerMode set.
- Allow IRC operators to use MODE command on any channel (closes: #100).
- New configuration option "NoPAM" to disable PAM.
- Implement asynchronous user authentication using PAM, please see the
file doc/PAM.txt for details.
- Add some documentation for using BOPM with ngIRCd, see doc/Bopm.txt.
- Implement user mode "c": receive connect/disconnect NOTICEs. Note that
this new mode requires the user to be an IRC operator.
- Show SSL status in WHOIS output, numeric 275.
ngIRCd Release 16 (2010-05-02)
ngIRCd 16~rc2 (2010-04-25)
- Enhace connection statistics counters: display total number of served
connections on daemon shutdown and when a new client connects using
the new numeric RPL_STATSCONN (250).
ngIRCd 16~rc1 (2010-03-25)
- Implement WEBIRC command used by some Web-IRC frontends. The password
required to secure this command must be configured using the new
"WebircPassword" variable in the ngircd.conf file.
- Remove limit on max number of configured irc operators.
- A new channel mode "secure connections only" (+z) has been implemented:
Only clients using a SSL encrypted connection to the server are allowed
to join such a channel.
But please note three things: a) already joined clients are not checked
when setting this mode, b) IRC operators are always allowed to join
every channel, and c) remote clients using a server not supporting this
mode are not checked either and therefore always allowed to join.
ngIRCd Release 15 (2009-11-07)
ngIRCd 15~rc1 (2009-10-15)
- Do not add default listening port (6667) if SSL ports were specified, so
ngIRCd can be configured to only accept SSL-encrypted connections now.
- Enable IRC operators to use the IRC command SQUIT (insted of the already
implemented but non-standard DISCONNECT command).
- New configuration option "AllowRemoteOper" (disabled by default) that
enables remote IRC operators to use the IRC commands SQUIT and CONNECT
on the local server.
- Enforce upper limit on maximum number of handled commands. This implements
a throttling scheme: an IRC client can send up to 3 commands or 256 bytes
per second before a one second pause is enforced.
ngIRCd Release 14.1 (2009-05-05)
- Security: fix remotely triggerable crash in SSL/TLS code.
- Debian: build ngircd-full-dbg package.
- Allow ping timeout quit messages to show the timeout value.
ngIRCd Release 14 (2009-04-20)
ngIRCd 14~rc1 (2009-03-29)
- Allow creation of persistent modeless channels.
- The INFO command reports the compile time now (if available).
- Support individual channel keys for pre-defined channels: introduce
new configuration variable "KeyFile" in [Channel] sections in ngircd.conf,
here a file can be configured for each pre-defined channel which contains
individual channel keys for different users.
- Remove limit on maximum number of predefined channels in ngircd.conf.
ngIRCd Release 13 (2008-12-25)
ngIRCd 13~rc1 (2008-11-21):
- New version number scheme :-)
- Initial support for IRC services, using a RFC1459 style interface,
tested with IRCServices (http://www.ircservices.za.net/) version 5.1.13.
For this to work, ngIRCd now supports server-server links conforming
to RFC 1459. New ngircd.conf(5) option: ServiceMask.
- Support for SSL-encrypted server-server and client-server links using
OpenSSL (configure: --with-openssl) or GNUTLS (configure: --with-gnutls).
New ngircd.conf(5) options: SSLPorts, SSLKeyFile, SSLKeyFilePassword,
SSLCertFile, SSLDHFile, and SSLConnect.
- Server local channels have been implemented, prefix "&", that are only
visible to users of the same server and are not visible in the network.
In addition ngIRCd creates a "special" channel &SERVER on startup and logs
all the messages to it that a user with mode +s receives.
- New make target "osxpkg" to build a Mac OS X installer package.
- New configuration option "NoIdent" to disable IDENT lookups even if the
daemon is compiled with IDENT support.
ngIRCd 0.12.1 (2008-07-09)
- Add option aliases -V (for --version) and -h (for --help).
- Make Listen parameter a comma-separated list of addresses. This also
obsoletes ListenIPv4 and ListenIPv6 options. If Listen is unset, it
is treated as Listen="::,0.0.0.0".
Note: ListenIPv4 and ListenIPv6 options are still recognized,
but ngircd will print a warning if they are used in the config file.
ngIRCd 0.12.0 (2008-05-13)
ngIRCd 0.12.0-pre2 (2008-04-29)
- IPv6: Add config options to disable ipv4/ipv6 support.
ngIRCd 0.12.0-pre1 (2008-04-20)
- Add IPv6 support.
- Install a LaunchDaemon script to start/stop ngIRCd on Mac OS X.
- Implemented IRC commands INFO, SUMMON (dummy), and USERS (dummy) and
enhanced test suite to check these commands. (Dana Dahlstrom)
- IRC_WHO now supports search patterns and will test this against user
nickname/server name/host name, etc. as required by RFC 2812, Section 3.6.1.
(reported by Dana Dahlstrom)
- Implement RFC 2812 handling of "0" argument to 'JOIN': must be treated
as if the user had sent PART commands for all channels the user is a
member of. (Dana Dahlstrom)
- Allow NOTICEs to be sent to a channel. (Fabian Schlager)
ngIRCd 0.11.0 (2008-01-15)
- Add support for /STAT u (server uptime) command.
- New [Server] configuration Option "Bind" allows to specify
the source IP address to use when connecting to remote server.
- New configuration option "MaxNickLength" to specify the allowed maximum
length of user nicknames. Note: must be unique in an IRC network!
- Numeric 317: implemented "signon time" (displayed in WHOIS result).
- Added new server configuration option "Passive" for "Server" blocks to
disable automatic outgoing connections (similar to -p option to ngircd,
but only for the specified server). (Tassilo Schweyer)
- Added support for the WALLOPS command. Usage is restricted to IRC
operators.
ngIRCd 0.10.2 (2007-06-08)
- Predefined channel configuration now allows specification of channel key
(mode k) and maximum user count (mode l): variables "Key" and "MaxUsers".
- When using the epoll() IO interface, compile in the select() interface as
well and fall back to it when epoll() isn't available on runtime.
- Added support for IO APIs "poll()" and "/dev/poll".
ngIRCd 0.10.1 (2006-12-17)
- Allow PASS syntax defined in RFC 1459 for server links, too.
- New configuration option "PredefChannelsOnly": if set, clients can only
join predefined channels.
ngIRCd 0.10.0 (2006-10-01)
ngIRCd 0.10.0-pre1 (2006-08-02)
- Enhanced DIE to accept a single parameter ("comment text") which is sent
to all locally connected clients before the server goes down.
- JOIN now supports more than one channel key at a time.
- Implemented numeric "333": Time and user name who set a channel topic.
- Channel topics are no longer limited to 127 characters: now the only limit
is the maximum length of an IRC command, i. e. 512 bytes (in practice, this
limits the topic to about 490 characters due to protocol overhead).
- Reverse DNS lookup code now checks the result by doing an additional
lookup to prevent spoofing.
- Added new IO layer which (optionally) supports epoll() and kqueue() in
addition to the select() interface.
ngIRCd 0.9.0 (2005-07-24)
- Never run with root privileges but always switch the user ID.
- Make "netsplit" messages RFC compliant.
- Implemented the IRC function "WHOWAS".
- New configuration option "OperServerMode" to enable a workaround needed
when running an network with ircd2 servers and "OperCanUseMode" enabled
to prevent the ircd2 daemon to drop mode changes of IRC operators.
Patch by Florian Westphal, <westphal@foo.fh-furtwangen.de>.
- Implemented support for "secret channels" (channel mode "s").
- New configuration option "Mask" for [Operator] sections to limit OPER
commands to users with a specific IRC mask. Patch from Florian Westphal.
- New configuration variable "PidFile", section "[Global]": if defined,
the server writes its process ID (PID) to this file. Default: off.
Idea of Florian Westphal, <westphal@foo.fh-furtwangen.de>.
- Added support for the Howl (http://www.porchdogsoft.com/products/howl/)
Rendezvous API, in addition to the API of Apple (Mac OS X). The available
API will be autodetected when you call "./configure --with-rendezvous".
ngIRCd 0.8.0 (2004-06-26)
- Two new configuration options: "ChrootDir" and "MotdPhrase", thanks to
Benjamin Pineau <ben@zouh.org>. Now you can force the daemon to change
its root and working directory to something "safe". MotdPhrase is used
to define an "MOTD string" instead of a whole file, useful if the
"real" MOTD file would be outside the "jail".
- INVITE- and BAN-lists become synchronized between IRC+ servers when
establishing new connections, if the peer supports this as well.
- The type of service (TOS) of all sockets is set to "interactive" now.
- Added short command line option "-t" as alternative to "--configtest".
- Added optional support for "IDENT" lookups on incoming connections. You
have to enable this function with the ./configure switch "--with-ident".
The default is not to do IDENT lookups.
ngIRCd 0.7.5 (2003-07-11)
- New configuration variable "MaxConnectionsIP" to limit the number of
simultaneous connections from a single IP that the server will accept.
This configuration options lowers the risk of denial of service attacks
(DoS), the default is 5 connections per client IP.
- Added new configuration variable "Listen" to bind all listening
sockets of the server to a single IP address.
ngIRCd 0.7.1 (2003-07-18)
- Added support for GNU/Hurd.
ngIRCd 0.7.0 (2003-05-01)
- New command CONNECT to enable and add server links. The syntax is not
RFC-compatible: use "CONNECT <name> <port>" to enable and connect an
configured server and "CONNECT <name> <port> <host> <mypwd> <peerpwd>"
to add a new server (ngIRCd tries to connect new servers only once!).
- Added DISCONNECT command ("DISCONNECT <name>") to disable servers.
- New command TRACE (you can trace only servers at the moment).
- New command HELP that lists all understood commands.
- ngIRCd can register itself with Rendezvous: to enable support pass the
new switch "--with-rendezvous" to configure.
- Added support for TCP Wrappers library: pass "--with-tcp-wrappers" to
configure to enable it.
- Changed some configure options to use "--with"/"--without" as prefix
instead of "--enable"/"--disable": "--without-syslog", "--without-zlib",
"--with-tcp-wrappers", and "--with-rendezvous".
- Enhanced manual pages ngircd(8) and ngircd.conf(5).
- Documentation is now installed in $(datadir)/doc/ngircd.
Older news (sorry, only available in german language):
ngIRCd 0.6.0, 2002-12-24
- beim Schliessen einer Verbindung zeigt der Server nun vor dem ERROR
noch eine Statistik ueber die empfangene und gesendete Datenmenge an.
- Connection-Strukturen werden nun "pool-weise" verwaltet; der Pool wird
bei Bedarf bis zu einem konfigurierten Limit vergroessert.
- Mit der neuen Konfigurationsvariable "MaxConnections" (Sekion "Global")
kann die maximale Anzahl gleichzeitiger Verbindungen begrenzt werden.
Der Default ist -1, "unlimitiert".
- der Server erkennt nun, ob bereits eine eingehende Verbindung von einem
Peer-Server besteht und versucht dann nicht mehr, selber eine eigene
ausgehende Verbindung zu diesem auufzubauen. Dadurch kann nun auf beiden
Servern in der Konfiguration ein Port fuer den Connect konfiguriert
werden (beide Server versuchen sich dann gegenseitig zu connectieren).
- Server identifizieren sich nun mit asynchronen Passwoertern, d.h. das
Passwort, welches A an B schickt, kann ein anderes sein als das, welches
B als Antwort an A sendet. In der Konfig.-Datei, Abschnitt "Server",
wurde "Password" dazu durch "MyPassword" und "PeerPassword" ersetzt.
- Der Server kann nun zur Laufzeit die Konfiguration neu einlesen: dies
macht er nach dem Befehl REHASH oder wenn ein HUP-Signal empfangen wird.
- Server-Server-Links koennen nun komprimiert werden, dazu wird die zlib
(www.zlib.org) benoetigt. Unterstuetzt die Gegenseite die Komprimierung
nicht, wird automatisch unkomprimiert kommuniziert. Das Verfahren ist
kompatibel mit dem Original-ircd 2.10.3, d.h. beide Server koennen
miteinander ueber komprimiert Links kommunizieren.
- neue Konfigurations-Variable "MaxJoins": Hiermit kann die maximale Zahl
der Channels, in denen ein User Mitglied sein kann, begrent werden.
- neue Channel-Modes l (User-Limit) und k (Channel-Key) implementiert.
ngIRCd 0.5.0, 20.09.2002
- AIX (3.2.5), HP-UX (10.20), IRIX (6.5), NetBSD (1.5.3/m68k) und Solaris
(2.5.1, 2.6) gehoeren nun auch zu den unterstuetzten Platformen.
- Unter A/UX (und evtl. weiteren Systemen) kompiliert der ngIRCd nun mit
dem "nativen" (ggf. pre-ANSI) Compiler.
- "persistente Channels" (Mode 'P') implementiert: diese koennen in der
Konfigurationsdatei definiert werden (Sektion "Channel", vgl. Beispiel-
Konfiguration "sample-ngircd.conf") und bleiben auch dann bestehen,
wenn kein User mehr im Channel ist.
- neue IRC-Befehle: KICK, INVITE, ADMIN, CHANINFO; LIST wurde erweitert.
Mit dem neuen Befehl CHANINFO synchronisieren Server, die das IRC+-
Protokoll unterstuetzen, Channel-Modes und Topics. Fuer den ADMIN-Befehl
gibt es neue Konfigurationsoptionen (Sektion "Global"): "AdminInfo1",
"AdminInfo2" und "AdminEMail".
- Invite- und Ban-Lists implementiert.
- neue Konfigurationsoption "OperCanUseMode" (Sektion "Global"):
ist sie aktiv, koennen IRC-Operatoren immer Channel-Modes setzen.
- "Test-Suite" begonnen: mit "make check" wird sie durchlaufen.
ngIRCd 0.4.2, 29.04.2002
- IRC-Funktion LIST implementiert; bisher werden allerdings noch keine
Regular Expressions (bis auf "*") unterstuetzt.
ngIRCd 0.4.0, 01.04.2002
- WHO implementiert (bisher ohne komplette Unterstuetzung von Masks).
- stderr wird nun in eine Datei umgelenkt (/ngircd-<PID>.err).
Laeuft der Server nicht im Debug-Modus, so wird diese bei Programm-
ende geloescht. Sollte der Server abstuerzen, finden sich hier evtl.
zusaetzliche Informationen.
- Server-Gruppen implementiert: es wird immer nur zu einem Server in
einer Gruppe eine Verbindung aufgebaut, klappt es beim ersten Server
nicht, so wird der naechste probiert.
- Clients und Channels werden nicht mehr ueber ihren Namen, sondern
einen Hash-Wert gesucht: sollte deutlich schneller sein.
- neuer Kommandozeilen-Parameter "--configtest": die Konfiguration wird
gelesen und die dann verwendeten Werte angezeigt.
- Client-Mode "s" (Server Notices) implementiert.
- mit dem neuen Kommandozeilen-Parameter "--config"/"-f" kann eine
alternative Konfigurationsdatei angegeben werden.
- nach dem Start kann der ngIRCd, wenn er mit root-Rechten laeuft,
zu einer anderen User-ID und Group-ID wechseln.
ngIRCd 0.3.0, 02.03.2002
- bekommt der Server ein HUP-Signal, so startet er neu -- genau so, wie
er auf den IRC-Befehl RESTART reagiert.
- neuer Kommandozeilen-Schalter "--passive" (-p): wird er angegeben, so
verbindet sich der ngIRCd nicht mehr automatisch zu anderen Servern.
Zum Debuggen manchmal ganz praktisch :-)
- neue Befehle VERSION und KILL implementiert. NAMES korrigiert.
- Anpassungen an A/UX: gehoert nun auch zu den unterstuetzten Platformen.
- AWAY (und der User-Mode 'a') ist nun implementiert.
- der ngIRCd unterstuetzt nun Channel-Topics (TOPIC-Befehl).
- Channel- und Nicknames werden nun ordentlich validiert.
ngIRCd 0.2.0, 15.02.2002
- Begonnen Channel-Modes und User-Channel-Modes zu implementieren: der
Server versteht an User-Modes o und v, beachtet letzteres allerdings
noch nirgends. Bekannte (aber nicht beachtete!) Channel-Modes sind
bisher a, m, n, p, q, s und t. Diese Modes werden von Usern ange-
nommen, von anderen Servern werden auch unbekannte Modes uebernommen.
- Nach dem Connect eines Users werden LUSERS-Informationen angezeigt.
ngIRCd 0.1.0, 29.01.2002
- Channels implementiert, bisher jedoch noch ohne Channel-Modes, d.h.
es gibt keine Channel-Ops, kein Topic, kein "topic lock" etc. pp.
Chatten in Channels ist aber natuerlich moeglich ;-)
Dadurch zum Teil groessere Aenderungen an bisherigen Funktionen.
- neue Befehle fuer Channles: JOIN, PART und NJOIN.
- FAQ.txt in doc/ begonnen.
ngIRCd 0.0.3, 16.01.2002
- Server-Links vollstaendig implementiert: der ngIRCd kann nun auch
"Sub-Server" haben, also sowohl als Leaf-Node als auch Hub in einem
IRC-Netzwerk arbeiten.
- WHOIS wird nun immer an den "Original-Server" weitergeleitet.
- Parser handhabt Leerzeichen zw. Parametern nun etwas "lockerer".
- Kommandozeilen-Parser: Debug- und No-Daemon-Modus, Hilfe.
- ngIRCd wandelt sich nun in einen Daemon (Hintergrundprozess) um.
- neue Befehle: LUSERS, LINKS.
ngIRCd 0.0.2, 06.01.2002
- neuer Aufbau der Konfigurationsdatei,
- mehrere IRC-Operatoren koennen konfiguriert werden,
- Server-Links teilweise implementiert. Bisher kann der ngIRCd jedoch
nur "leafed server" sein, d.h. keine "Client-Server" haben.
ngIRCd 0.0.1, 31.12.2001
- erste oeffentliche Version von ngIRCd als "public preview" :-)