ngircd-tor/doc/sample-ngircd.conf

138 lines
4.4 KiB
Plaintext

# $Id: sample-ngircd.conf,v 1.20 2003/03/10 00:23:34 alex Exp $
#
# This is a sample configuration file for the ngIRCd, which must adept to
# the local preferences and needs.
#
# Comments are started with "#" or ";".
#
# Author: Alexander Barton, <alex@barton.de>
# Initial translation by Ilja Osthoff, <ilja@glide.ath.cx>
#
[Global]
# The [Global] section of this file is used to define the main
# configuration of the server, like the server name and the ports
# on which the server should be listening.
# Server name in the IRC-network
Name = irc.the.net
# Info text of the server. This will be shown by WHOIS and
# LINKS requests for example.
Info = Server Info Text
# Information about the server and the administrator, used by the
# ADMIN command.
;AdminInfo1 = Description
;AdminInfo2 = Location
;AdminEMail = admin@irc.server
# Ports on which the server should listen. There may be more than
# one port, separated with ";". (Default: 6667)
;Ports = 6667, 6668, 66694
# Text file with the "message of the day" (MOTD). This message will
# be shown to all users connecting to the server:
;MotdFile = /usr/local/etc/ngircd.motd
# User ID under which the server should run; you can use the name
# of the user or the numerical ID. ATTENTION: For this to work the
# server must have been started with root privileges! In addition,
# the configuration and MOTD files must be readable by this user,
# otherwise RESTART and REHASH won't work!
;ServerUID = 65534
# Group ID under which the ngircd should run; you can use the name
# of the group or the numerical ID. ATTENTION: For this to work the
# server must have been started with root privileges!
;ServerGID = 65534
# After <PingTimeout> seconds of inactivity the server will send a
# PING to the peer to test whether it is alive or not.
;PingTimeout = 120
# If a client fails to answer a PING with a PONG within <PongTimeout>
# seconds, it will be disconnected by the server.
;PongTimeout = 20
# The server tries every <ConnectRetry> seconds to establish a link
# to not yet (or no longer) connected servers.
;ConnectRetry = 60
# Should IRC Operators be allowed to use the MODE command even if
# they are not(!) channel-operators?
;OperCanUseMode = no
# Maximum number of simultaneous connection the server is allowed
# to accept (<=0: unlimited):
;MaxConnections = -1
# Maximum number of channels a user can be member of (<=0: no limit):
;MaxJoins = 10
[Operator]
# [Operator] sections are used to define IRC Operators. There may be
# more than one [Operator] block, one for each local operator.
# ID of the operator (may be different of the nick name)
;Name = TheOper
# Password of the IRC operator
;Password = ThePwd
[Server]
# Other servers are configured in [Server] sections. If you
# configure a port for the connection, then this ngircd tries to
# connect to to the other server on the given port; if not it waits
# for the other server to connect.
# There may be more than one server block.
#
# Server Groups:
# The ngIRCd allows "server groups": You can assign an "ID" to every
# server with which you want this ngIRCd to link. If a server of a
# group won't answer, the ngIRCd tries to connect to the next server
# in the given group. But the ngircd never tries to connect to two
# servers with the same group ID.
# IRC name of the server
;Name = irc2.the.net
# Internet host name of the peer
;Host = connect-to-host.the.net
# Port of the server to which the ngIRCd should connect. If you
# assign no port the ngIRCd waits for incoming connections.
;Port = 6666
# Own password for the connection. This password has to be configured
# as "PeerPassword" on the other server.
;MyPassword = MySecret
# Foreign password for this connection. This password has to be
# configured as "MyPassword" on the other server.
;PeerPassword = PeerSecret
# Group of this server (optional)
;Group = 123
[Channel]
# Pre-defined channels can be configured in [Channel] sections.
# Such channels are created by the server when starting up and even
# persist when there are no more members left.
# Persistent channels are marked with the mode 'P', which can be set
# and unset by IRC operators like other modes on the fly.
# There may be more than one [Channel] block.
# Name of the channel
;Name = #TheName
# Topic for this channel
;Topic = a great topic
# Initial channel modes
;Modes = tn
# -eof-