Sweden-Number/documentation/faq.sgml

1809 lines
69 KiB
Plaintext
Raw Blame History

<!-- *** Wine FAQ *** -->
<title>Wine FAQ</title>
<qandaset>
<qandadiv id="About-this-FAQ"><title>About this FAQ</title>
<qandaentry>
<question id="Who-maintains-this-FAQ">
<para>Who maintains this FAQ ?</para>
</question>
<answer>
<para>Dave Gardner maintained it from 1995-1998.</para>
<para>Douglas Ridgway (ridgway@winehq.com) took it over in 1999.</para>
<para>Andreas Mohr (amohr@codeweavers.com) converted it to FAQ-O-Matic in 2000.</para>
<para>Dimitrie O. Paun, Keith Matthews and Thomas Wickline reorganised it in 2002.</para>
<para>For suggestions/additions/complaints regarding this FAQ, please send an email to
<ulink url="mailto:wine-faq@winehq.org">wine-faq@winehq.org</ulink></para>
</answer>
</qandaentry>
<qandaentry>
<question id="What-is-the-copyright-on-the-FAQ-And">
<para>What is the copyright on the FAQ? And how may I use it?</para>
</question>
<answer>
<para>The original Wine FAQ, which this FAQ was based on, was copyright &copy; 1995-1998 David Gardner.</para>
<para>It may be reproduced and modified under the same terms as Wine itself.</para>
</answer>
</qandaentry>
</qandadiv>
<qandadiv id="General-Questions-about-Wine">
<title>General Questions about Wine</title>
<qandaentry>
<question id="What-is-Wine-and-what-is-it-supposed-to">
<para>What is Wine and what is it supposed to do?</para>
</question>
<answer>
<para>
Wine is a program which allows the operation of DOS and MS
Windows programs (Windows 3.x and Win32 executables) on UNIX operating systems such as Linux.
It consists of a program loader, which loads and executes a Windows
binary, and a set of libraries that implements Windows API calls
using their UNIX or X11 equivalents. The libraries may also be used
for porting Win32 code into native UNIX executables, often
without many changes in the source. Wine is free software,
and its license (contained in the file LICENSE
in each distribution) is the LGPL.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Is-Wine-an-emulator">
<para>Does Wine emulate a full computer?</para>
</question>
<answer>
<para>
No, as the name says, Wine Is Not a (CPU) Emulator. Wine just
provides the Windows API. This means that you will need an
x86-compatible processor to run an x86 Windows application, for instance from Intel or AMD. The
advantage is that, unlike solutions that rely on CPU emulation, Wine
runs applications at full speed. Sometimes a program run under
Wine will be slower than when run on a copy of Microsoft Windows, but
this is more due to the fact that Microsoft have heavily optimized parts of their
code, whereas mostly Wine is not well optimized (yet). Occasionally, an app
may run faster under Wine than on Windows. Most apps run at roughly the same speed.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Are-here-any-alternatives-to-Wine">
<para>Are there any alternatives to Wine?</para>
</question>
<answer>
<para>
Yes, there are. You can use <ulink url="http://www.vmware.com">VMWare</ulink> to run a Windows installation inside a virtual machine,
or use <ulink url="http://www.win4lin.com">Win4Lin</ulink>
to run a specially adapted Windows version on Linux.
Both solutions cost money for both the software itself
and a Windows license.
</para>
<para>
Note that, like Wine, they can only use the hardware platform that
the target programs were originally compiled for (see below).
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Difference-between-Wine-and-emulators">
<para>What is the difference between Wine and x86 hardware emulators?</para>
</question>
<answer>
<para>
There are two free x86 hardware emulators:
<ulink url="http://bochs.sourceforge.net">bochs</ulink>, and
<ulink url="http://savannah.nongnu.org/projects/plex86">plex86</ulink>.
</para>
<para>
Plex86 is the open-source free-software alternative for VMWare,
VirtualPC, and other IA-32 on IA-32 "Virtual PC products." It
can only run on the IA-32 architecture.
</para>
<para>
Bochs is a highly portable open source IA-32 (x86) PC emulator
written in C++, that runs on most popular platforms. It includes emulation
of the Intel x86 CPU, common I/O devices, and a custom BIOS. Currently,
bochs can be compiled to emulate a 386, 486 or Pentium CPU. Bochs is capable
of running most Operating Systems inside the emulation including Linux,
Windows<77> 95, DOS, and recently Windows<77> NT 4.
</para>
<para>
Both are licensed under the GPL. Bochs is older than plex86, seems to be
easier to install, but plex86 will run faster because plex86 uses a just in
time binary compiler.
</para>
<para>
The drawback of all emulators is that you need a version
of Windows in order to run Windows, and that they all have an
impact on performance. Wine also gives much better desktop integration - for
instance, programs use your standard window manager, system tray icons will
appear in your tray area (if you have one), and you can run programs direct from the
command line and the menus. The clipboard also works seamlessly.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Why-would-anyone-want-Wine-Windows-suck">
<para>Why would anyone want Wine? Doesn't Windows suck?</para>
</question>
<answer>
<para>
First Wine is not about running Windows but about running Windows
applications.
</para>
<para>
So if all your computing needs are fulfilled by native Unix
applications, then you do not need Wine and should not be using
it. However, if you depend on one or more of the tens of
thousands of Windows applications, then Wine is the best way to
use it without giving up on Unix. Let's look at the alternatives
to see why:
</para>
<para>
The most obvious alternative is to dual-boot. This is the solution
that provides the best compatibility. However it requires that you
acquire a Windows license and then dedicate a good chunk of your
hard-drive to Windows. But the worst is yet to come. Each time you
will want to use that application you will have to reboot to
Windows. This is especially significant if external factors dictate
when you must use this application (e.g. credit card to process,
email to retrieve from a Lotus Notes server). Then you will find
yourself forced to close all your Linux applications just to run
that one Windows application. You may quickly get tired of this, or
will find that such a situation is impossible to justify in a
business environment.
</para>
<para>
The next solution is to install virtual machine emulation software
such as VMWare, Win4Lin or Plex86. Then you can use windows
applications without suffering such a big disruption. But it still
requires that you acquire a Windows license and dedicate as much
disk space to Windows. Furthermore you will pay for the added
convenience: if using VMWare or Win4Lin you have to buy another
license, and more importantly you now have to dedicate a good chunk
of your computer's memory to the virtual machine. Performance will
take a significant hit too.
</para>
<para>
Using Wine lets you avoid all of that overhead: Windows license,
hard-drive space required by Windows, memory and performance hit
taken by emulated virtual machines. Now you can start your Windows
application straight from your regular desktop environment, place
that application's window side by side with native applications,
copy/paste from one to the other, and run it all at full speed.
</para>
<para>
It is also a pretty vital part of migrating a large organisation,
you can't change a 5000 desktop setup overnight without a lot of risk.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Which-one-of-the-different-Wine-packages">
<para>Which one of the different Wine packages out there is good for me?</para>
</question>
<answer>
<para>
Currently there is a broad selection of different Wine packages/versions:
</para>
<variablelist>
<varlistentry>
<term><ulink url="http://www.winehq.com">Wine</ulink></term>
<listitem>
<para>
This is the "standard" source distribution of Wine. Its license is
the LGPL, it can be downloaded for free.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><ulink url="http://rewind.sourceforge.net">ReWind</ulink></term>
<listitem>
<para>
This is a forked Wine tree that got created when Wine changed its
license from X11 to the more restrictive LGPL, in order to let
people continue to maintain an X11 licensed Wine version. Its
license is X11, it can be downloaded for free.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><ulink url="http://www.transgaming.com">Transgaming's WineX</ulink></term>
<listitem>
<para>
This is TransGaming's Wine version specially suited for
games. It includes more mature Direct3D support than
WineHQ, although these days WineHQ has quite advanced
D3D support as well. Most of the code is under the AFPL
and can be downloaded for free.
</para>
<para>
However Transgaming also distributes binaries that contain
improved copy protection support (needed for many
games), support, and other enhancements. These packages are
only available in binary form to subscribed customers
($5/month).
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><ulink url="http://wine.codeweavers.com">CodeWeavers' Wine preview</ulink></term>
<listitem>
<para>
This is a special packaged version of the standard Wine tree
which has a nice setup for easy installation. License LGPL, free
download. It's pretty old now, and not recommended for general use.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><ulink url="http://www.codeweavers.com/products/crossover/">CodeWeavers' Crossover Plugin</ulink></term>
<listitem>
<para>
Special Wine installation to be used for running Windows
Netscape browser plugins such as e.g. QuickTime in Linux
browsers. Costs $24.95.
Well worth it (very stable and useful packaging).
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><ulink url="http://www.codeweavers.com/products/office/">CodeWeavers' Crossover Office</ulink></term>
<listitem>
<para>
Wine version with special packaging to make sure almost all
important Office type programs work pretty well. Costs $54.95.
Seems to be well worth it so far according to some comments.
(note: you're supporting a company actively contributing to Wine
if you decide to buy either Plugin or Office.)
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><ulink url="http://www.winehq.org/download/">Other packaged versions of Wine</ulink></term>
<listitem>
<para>
Various Wine packages can be downloaded for free from
Wine HQ. They are not officially packaged by Wine HQ, and as
such may have some configuration inconsistencies.
</para>
</listitem>
</varlistentry>
</variablelist>
</answer>
</qandaentry>
<qandaentry>
<question id="Whats-the-history-of-Wine">
<para>What's the history of Wine?</para>
</question>
<answer>
<para>
The Wine project started in 1993 as a way to support running Windows 3.1
programs on Linux. Bob Amstadt was the original coordinator, but turned
it over fairly early on to Alexandre Julliard, who has run it ever
since. A <ulink url="news:comp.emulators.ms-windows.wine">newsgroup</ulink>
was created in July 1994. Over the years, ports for
other Unixes have been added, along with support for Win32 as Win32
applications became popular.
</para>
<para>
For more information, see <ulink url="http://www.winehq.com/about.shtml">
http://www.winehq.com/about.shtml</ulink>
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="What-is-the-current-version-of-Wine">
<para>What is the current version of Wine?</para>
</question>
<answer>
<para>
A new version of Wine is distributed about every month. You will be
able to keep up on all the latest releases by reading the newsgroup
<ulink url="news:comp.emulators.ms-windows.wine">
comp.emulators.ms-windows.wine</ulink>, or by visiting the
<ulink url="http://www.winehq.com">Wine HQ homepage</ulink>. When
downloading Wine from your FTP site of choice (see
<ulink url="http://www.winehq.com/download.shtml">the Download page</ulink>
for some of these choices), you can make sure that you are getting
the latest version by watching the version numbers in the distribution
filename. For instance, the distribution released on October 31, 2002
was called Wine-20021031.tar.gz. Patch files are also available. If
you are current to the previous version, you can download and apply
just the current patch file rather than the entire new distribution.
The patch filenames follow the same conventions as the monthly
distribution. <ulink url="http://www.winehq.com/dev.shtml">
Read-only CVS</ulink> access is also available.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="What-is-the-current-Status-of-Wine">
<para>What is the current Status of Wine?</para>
</question>
<answer>
<para>
As of mid 2003, Wine consists of about 1.4 million lines of code,
written by more than 550 developers from dozens of countries around
the world. Wine is in active use by an estimated 100K people. Wine
implements more than 90% of the calls in popular Windows
specifications such as ECMA-234 and Open32.
</para>
<para>
You may also want to look at the
<ulink url="http://www.winehq.com/about/index.php?status">
Status page</ulink> for a global view on Wine's implementation progress.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="When-will-Wine-be-finished">
<para>When will Wine be finished?</para>
</question>
<answer>
<para>
Large software projects are never finished, only released. In any
case Wine is chasing a moving target since every new release of
Windows contains new API calls or variations on the existing ones.
</para>
<para>
Because Wine is being developed by volunteers, it is difficult to
predict when it will be ready for general release. But due to the
much increased interest by companies in porting apps via Wine, Wine
development is constantly getting more and more active. Right now
we are working on releasing Wine 0.9 in 2003.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Who-is-responsible-for-Wine">
<para>Who is responsible for Wine?</para>
</question>
<answer>
<para>
Wine is available thanks to the work of many people. Please see the
<ulink url="http://www.winehq.com/source/AUTHORS">AUTHORS</ulink>
file in the distribution for the complete list. Some companies that
are or have been involved with Wine development are CodeWeavers,
TransGaming, Corel, and Macadamian.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="folks-who-contributed-money-or-equipment">
<para>Who are the folks and organizations who have contributed money or equipment to the Wine project?</para>
</question>
<answer>
<para>
People and organizations who have given generous contributions of
money, equipment, or licenses, include:
</para>
<itemizedlist spacing="compact">
<listitem>
<para>David L. Harper</para>
</listitem>
<listitem>
<para>Bob Hepple</para>
</listitem>
<listitem>
<para>Mark A. Horton</para>
</listitem>
<listitem>
<para>Kevin P. Lawton</para>
</listitem>
<listitem>
<para>The Syntropy Institute</para>
</listitem>
<listitem>
<para>James Woulfe</para>
</listitem>
<listitem>
<para>
VMWare Inc. (<ulink url="http://www.vmware.com">
http://www.vmware.com</ulink>)
</para>
</listitem>
<listitem>
<para>
Corel (<ulink url="http://www.corel.com">
http://www.corel.com</ulink>)
</para>
</listitem>
</itemizedlist>
</answer>
</qandaentry>
<qandaentry>
<question id="What-undocumented-APIs-are-not-understood">
<para>What undocumented APIs / interfaces are not understood? Would
seeing Microsoft source help?
</para>
</question>
<answer>
<para>
The best would be if the Windows API was fully documented, so Wine
could be a perfect "clean-room" implementation. Seeing the source
code might make it harder to prove that no copyright violations have
taken place. That said, the documentation is often bad, nonexistent,
and even misleading where it exists, so a fair amount of reverse
engineering has been necessary, particularly in the shell (Explorer)
interface. The biggest problem facing Wine though is simply lack of
manpower. At one point, over 5000 people were working on Windows 2000.
While Wine doesn't need to replicate all of Windows (we only cover the
parts needed to make Windows programs work), that's still nearly 10 times
more people working simply on one release than have <emphasis>ever</emphasis>
worked on Wine, in the history of the project.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Is-TransGamings-last-patch-included-in-Wine">
<para>Is TransGaming's latest patch included in the standard Wine release?</para>
</question>
<answer>
<para>
No, it's not.
</para>
<para>
TransGaming makes money via a subscription service and the license
of their WineX tree is incompatible with the Wine license. Thus
WineX patches cannot be integrated into the Wine tree without
express permission by TransGaming. They have submitted some
of their work for integration into Wine, most notably DirectDraw
and some DirectSound work, and such work has been integrated into
the Wine tree. However it seems unlikely they will submit their
Direct3D work.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Will-there-be-a-Windows-version-of-Wine">
<para>Will there be a Windows version of Wine?</para>
</question>
<answer>
<para>
Some people are working on getting Wine code to compile on Windows.
</para>
<itemizedlist spacing="compact">
<listitem>
<para>
Cygwin (<ulink url="http:/www.cygwin.com">
http://www.cygwin.com/</ulink>)
</para>
</listitem>
<listitem>
<para>
Reactos (<ulink url="http://www.reactos.com/">
http://www.reactos.com/</ulink>)
</para>
</listitem>
</itemizedlist>
<para>
There's some progress, so a Wine version that's usable on Windows
might be available at some time.
</para>
</answer>
</qandaentry>
</qandadiv>
<qandadiv id="What-do-I-need-in-order-to-use-Wine">
<title>What do I need in order to use Wine?</title>
<qandaentry>
<question id="Under-what-platforms-will-Wine-run">
<para>
Under what hardware platform(s) and operating system(s) will
Wine(Lib) run?
</para>
</question>
<answer>
<para>
Wine is being developed specifically to run on the <emphasis>Intel x86</emphasis> class of CPUs under certain UNIXes that run on the x86 platform.
Winelib however is capable of porting Windows program <emphasis>source code</emphasis> to other platforms also, not only x86.
</para>
<para>
Thus running Windows programs via Wine on other platforms (e.g. MacOS X) is <emphasis>not</emphasis> possible; the only way to run Windows code
on MacOS X would be to take Windows program source code and recompile it for e.g. MacOS X using Winelib.
</para>
<para>
The following will list the x86 operating systems supported by
Wine; Winelib support for other platforms keeps evolving,
so it's not specifically listed here.
</para>
<para>
NetBSD, OpenBSD, Unixware, and SCO OpenServer 5 worked at one time,
but Wine now requires kernel-level threads which are not currently
available (or understood by the Wine team) on those platforms.
</para>
<para>
The Wine development team hopes to attract the interest of other
commercial UNIX and UNIX clone vendors as well.
</para>
<para>
BeOS: porting efforts used to be pretty strong, but BeOS has severe
limitations in Unix call support, so a port will probably never
happen.
</para>
<para>
FreeBSD: Should work, with limitations in specific areas (mainly
missing device/hardware support).
</para>
<para>
Linux/x86: Works, and as the most popular platform for both
developers and users, it is the best supported platform of all.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="What-minimum-CPU-must-I-have">
<para>
What minimum CPU must I have in my computer to be able to run Wine
and MS Windows applications smoothly?
</para>
</question>
<answer>
<para>
We need to differentiate between Wine and Winelib here.
</para>
<para>
Wine won't run on any x86 CPU less than an 80386 due to address
management limitations.
</para>
<para>
It is known to also work in the 80486 and upwards compatible CPUs.
The basic test is, if you can run X11 now, you should be able to run
Wine and MS Windows applications under it.
</para>
<para>
As always, the faster your CPU, the better. Having a math coprocessor
is unimportant. However, having a graphics accelerated video card
supported by X will help greatly.
</para>
<para>
Depending on your application you may find that faster speeds are
required for sensible use. We can't give specific advice on that due
to the vast range of applications out there. However the rule of
thumb is that if your application runs fine on Windows, it should
run fine on the same platform in Wine.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="How-much-disk-space-will-Wine-take">
<para>
How much disk space will the Wine source code and binaries take on my
hard drive?
</para>
</question>
<answer>
<para>
You need approximately 250 megabytes of free hard drive space to
store and compile the source code. Wine also needs about 18 megs in
your /tmp directory. And about 50 MB are needed to do a make install.
</para>
<para>
Binary packages, especially those not containing debug information,
have much lower disk space requirements, usually in the 20MB range.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="What-other-software-do-I-need-to-compile">
<para>
What other software do I need to install, compile and run
Wine?
</para>
</question>
<answer>
<para>
Many development tools are needed in order to compile Wine.
A list of required packages for several distributions is included in
the README (<ulink url="http://www.winehq.com/source/README">
http://www.winehq.com/source/README</ulink>).
</para>
<para>
To run Wine, you will need the following:
</para>
<itemizedlist spacing="compact">
<listitem>
<para>The compiled Wine binary</para>
</listitem>
<listitem>
<para>A properly configured wine.conf file (or ~/.winerc file)</para>
</listitem>
<listitem>
<para>An installed and working X Window system</para>
</listitem>
<listitem>
<para>Some Windows programs to test</para>
</listitem>
</itemizedlist>
</answer>
</qandaentry>
<qandaentry>
<question id="How-much-RAM-do-I-need">
<para>
How much RAM do I need to have on my UNIX system to be able to run
Wine and MS Windows applications smoothly?
</para>
</question>
<answer>
<para>
If you can run X smoothly on your UNIX system now, you should be
able to run Wine and MS Windows applications just fine too, depending
on how memory hungry the application is.
</para>
<para>
A Wine workstation will work with 16 megabytes of RAM and a 16
megabyte swap partition as long as you have a reasonable graphics
card. Most applications will run reasonably with 64/64 Mb,
interactive games are likely to need more. You can run Wine with 8/8,
but it is going to be unusably slow and very constraining on the
applications you can run. If you wish to be part of the development
team and program Wine itself, be aware that the debugger is rather
memory intensive. Some have suggested that 64 megabytes is the
minimum RAM needed for Wine development, although some are able to
work (albeit slowly) with 24 megabytes of physical RAM and lots of
swap space.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="How-long-does-Wine-take-to-build">
<para>How long does Wine take to build</para>
</question>
<answer>
<para>
Wine is getting to be quite large, and building from scratch takes a
lot of processing. As of September 2002, compile times were around 20
minutes on an Athlon 1200 with 640 Mb and 45-50 minutes on a Cyrix
300 with 64 Mb. If you have a CVS copy, you may not need to rebuild
the whole thing every time you update.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="I-have-a-Drivespaced-partition">
<para>
I have a Drivespaced, Doublespaced or Stackered DOS partition. Can
Wine run MS Windows binaries located in such a partition?
</para>
</question>
<answer>
<para>
Yes, but only if the operating system supports mounting those types
of drives. There is a Linux file system driver called dmsdos that
will allow read/write access to Doublespaced and Drivespace 1.0
drives. More specifically, it supports mounting DOS 6.0 and 6.2
Doublespaced, DOS 6.22 Drivespaced, and Windows 95 Doublespaced
compressed partitions (read and write access works fine, but write
access is slow). It can be found at
<ulink url="ftp://metalab.unc.edu/pub/Linux/system/filesystems/dosfs/">
ftp://metalab.unc.edu/pub/Linux/system/file systems/dosfs/</ulink>
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Do-I-need-to-have-a-DOS-partition">
<para>Do I need to have a DOS partition on my system to use Wine?</para>
</question>
<answer>
<para>
You do not need a licensed and installed copy of DOS or MS Windows to
install, configure and run Wine. However, Wine has to be able to
'see' an MS Windows binary (i.e. application) if it is to run it.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Does-MS-Windows-need-to-be-installed">
<para>
Does MS Windows need to be loaded into that partition in order to
run MS Windows programs under Wine?
</para>
</question>
<answer>
<para>
Many folks have successfully installed and run programs
in their UNIX filesystem without having a DOS partition or MS
Windows. However, in many cases you need a directory and file
infrastructure that is similar to an existing Windows installation.
Some applications' installation programs want to distribute some of
the package's files into the /windows and /windows/system
directories in order to run, and unless these exist on your UNIX
file system, those programs will not install correctly and probably
will not run well, if at all. Most packages will set that up for you
as part of the install process.
</para>
<para>
If you have a DOS partition with MS Windows installed in it, make
sure that your UNIX system can 'see' this partition (check your
/etc/fstab file or mount the partition manually) so that Wine can
run the MS Windows binaries located in the DOS partition. To run
without a DOS partition, you need to set a UNIX path to be your
drive C, and make sure that the /windows and /windows/system
directories point to some place that actually exist.
</para>
<para>
Here's an example, copied from a machine which has no DOS partition
but successfully runs Wine:
</para>
<screen>
[Drive C]
Path=/var/lib/wine
Type=hd
Label=MS-DOS
Filesystem=win95
[wine]
Windows=c:\windows
System=c:\windows\system
Temp=e:\
Path=c:\windows;c:\windows\system;c:
</screen>
<para>
In <filename>/var/lib/wine/windows</filename>, you will need to
install a <filename>win.ini</filename> config file that you might
find on a typical MS Windows 3.1 machine. The directory
<filename>/var/lib/wine/windows/system</filename> should exist, but
doesn't need to contain anything. However, to use MS DLLs, you can
copy them into that directory. Note that this is a contravention of
the Windows licence unless Windows is properly installed on the
machine. If you have DOS/MS Windows installed on your system, you can
mount that partition at bootup by modifying the file
<filename>/etc/fstab</filename> in your UNIX partition (assuming that
the UNIX kernel supports the DOS/MS Windows filesystem type).
</para>
<para>
If you edit this file by hand, it should contain something similar
to the following:
</para>
<screen>
/dev/hda1 /dosc msdos uid=0,gid=100,umask=007 0 0
</screen>
<para>
This will allow you to read and write to the DOS partition without
being root.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="If-Wine-completely-replaces-MS-Windows">
<para>
If Wine completely replaces MS Windows, will it duplicate all of the
functions of MS Windows?
</para>
</question>
<answer>
<para>
Most of them, yes. However, some applications and applets that come
with MS Windows, such as File Manager and Calculator, can be
considered by some to be redundant, since 32-bit UNIX programs that
duplicate these applets' functions already exist.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Will-I-install-on-any-UNIX-file-system">
<para>
Will I be able to install MS Windows applications in any flavor of a
UNIX file system?
</para>
</question>
<answer>
<para>
Wine is written to be file system independent, so MS Windows
applications will install and run under virtually any file system
supported by your brand of UNIX.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Will-Wine-run-only-under-X">
<para>Will Wine run only under X, or can it run in character mode?</para>
</question>
<answer>
<para>
Most of Wine's development effort is geared towards MS Windows' GUI,
but some limited support for character mode has appeared, by setting
<parameter>GraphicsDriver=ttydrv</parameter> in wine.conf's
<parameter>[wine]</parameter> section.
</para>
<para>
Wine's infrastructure is already somewhat prepared for supporting
other graphics drivers than x11drv, but no real "alternative"
graphics driver has been developed yet.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Will-Wine-run-under-any-X-window-manager">
<para>Will Wine run under any X window manager? Does it require a window manager at all?</para>
</question>
<answer>
<para>
Wine is window manager independent, so the X window manager you
choose to run has (almost) no bearing on your ability to run MS
Windows programs under Wine. Wine uses standard X libraries, so no
additional ones are needed. Wine has its own window management,
which acts like MS Windows. It can be turned off to use the native
window manager by modifying Managed or Desktop settings as described
in <command>man wine.conf</command>.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Will-32-bit-applications-run-under-Wine">
<para>Will 32-bit Windows 95/98 applications run under Wine?</para>
</question>
<answer>
<para>
Yes, 32-bit programs are now about as well supported as 16-bit
programs.
</para>
</answer>
</qandaentry>
</qandadiv>
<qandadiv id="FAQ-Getting-Wine">
<title>Getting Wine</title>
<qandaentry>
<question id="Where-can-I-get-Wine">
<para>Where can I get Wine?</para>
</question>
<answer>
<para>
Because of lags created by using mirror, word of this newest release
may reach you before the release is actually available at the ftp
sites listed here. The sources are available from the following
locations:
</para>
<itemizedlist>
<listitem>
<para>
<ulink url="http://www.ibiblio.org/pub/Linux/ALPHA/wine/development/">
http://www.ibiblio.org/pub/Linux/ALPHA/wine/development/
</ulink>
</para>
</listitem>
<listitem>
<para>
<ulink url="ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/ALPHA/wine/development/">
ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/ALPHA/wine/development/
</ulink>
</para>
</listitem>
<listitem>
<para>
<ulink url="ftp://ftp.fu-berlin.de/unix/linux/mirrors/sunsite.unc.edu/ALPHA/wine/development/">
ftp://ftp.fu-berlin.de/unix/linux/mirrors/sunsite.unc.edu/ALPHA/wine/development/
</ulink>
</para>
</listitem>
<listitem>
<para>
<ulink url="ftp://orcus.progsoc.uts.edu.au/pub/Wine/development/">
ftp://orcus.progsoc.uts.edu.au/pub/Wine/development/
</ulink>
</para>
</listitem>
</itemizedlist>
<para>
It should also be available from any other site that mirrors
ibiblio.org. For more download locations, see
<ulink url="http://ftp search.lycos.com.">lycos</ulink> Some of
these ftp sites may archive previous versions of Wine as well as the
current one. To determine which is the latest one, look at the
distribution file name, which will take the form
Wine-YYYYMMDD.tar.gz. Simply replace YYYYMMDD in the distribution
file name with the numbers for year, month and date, respectively.
The latest one is the one to get.
</para>
<para>
Wine binary packages are available for several OS'es and
distributions. See
<ulink url="http://www.winehq.com/download.shtml">
the download page</ulink> for the most recent list.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Is-there-a-CVS-tree">
<para>Is there a CVS tree?</para>
</question>
<answer>
<para>
Current Wine sources are also available via anonymous client/server
CVS. You will need CVS 1.9 or above. If you are coming from behind a
firewall, you will either need a hole in the firewall for the CVS
port (2401) or use SOCKS.
</para>
<para>
To login to the CVS tree, do
</para>
<screen>
export CVSROOT=:pserver:cvs@cvs.winehq.com/home/wine
cvs login
</screen>
<para>
Use "cvs" as the password (without the quotes). Note that
<filename>/home/wine</filename> is a path on the server, not on your
machine. To check out the entire Wine source tree (which may be
slow), use
</para>
<screen>
cvs -z 3 checkout wine
</screen>
<para>
or if you just want a subtree, or individual file, you can do that
too with
</para>
<screen>
cvs -z 3 checkout wine/ANNOUNCE
</screen>
<para>
Be aware, though, that getting the entire Wine source tree via CVS
is pretty slow, especially compared to getting Wine from an FTP
mirror near you. For a CVS mirror list, see
<ulink url="http://www.winehq.com/dev.shtml">
http://www.winehq.com/dev.shtml</ulink>
</para>
<para>
Patch files are also available, so that you don't have to download,
install, and configure the entire distribution each week if you are
current to the previous release. Patch file release names follow the
same numbering convention as do the general releases, and take the
form
</para>
<para>
Wine-YYYYMMDD.diff.gz
</para>
<para>
Patch files are available from the same sites that distribute the
full release. To upgrade to a new release by using a patch file,
first cd to the top-level directory of the release (the one
containing the README file), then do a "make clean", and patch the
release with
</para>
<screen>
gunzip -c patch-file | patch -p1
</screen>
<para>
where patch-file is the name of the patch file something like
Wine-YYYYMMDD.diff.gz. You can then re-run ./configure, and then run
make depend && make
</para>
<para>
If you are mirroring the Wine distribution from the tsx-11 site and
wish to be listed here in this FAQ, please add it to the
"things to go into the documentation" area.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Can-I-get-Wine-using-cvsup">
<para>Can I get Wine using cvsup?</para>
</question>
<answer>
<para>
The CVS mirrors don't offer cvsup support yet, but the main server
does. Use a <filename>wine.sup</filename> file of:
</para>
<screen>
*default host=cvs.winehq.com
*default base=/cvs
*default prefix=/cvs/wine
*default release=wine
*default delete
# If your network link is a T1 or faster, comment out the following line.
#*default compress
*default use-rel-suffix
wine
</screen>
</answer>
</qandaentry>
</qandadiv>
<qandadiv id="Installing-And-Configuring-Wine">
<title>Installing and Configuring Wine</title>
<qandaentry>
<question id="How-do-I-compile-the-Wine-source-code">
<para>How do I compile the Wine distribution source code?</para>
</question>
<answer>
<para>
See the README (<ulink url="http://www.winehq.com/source/README">http://www.winehq.com/source/README</ulink>) for instructions.
Additionally, you may want to set the <parameter>TMPDIR</parameter>
environment variable <command>TMPDIR=~/tmp</command> or
<command>TMPDIR=/tmp</command> (if you are root).
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="How-do-I-install-Windows-in-Wine">
<para>How do I install Windows in Wine under Linux?</para>
</question>
<answer>
<para>
Simple answer: you CAN'T. Windows demands direct access to the
hardware and cannot get it with Wine and UNIX in the way
</para>
<para>
Wine is supposed to be primarily used WITHOUT Windows. If you want
to use a Windows installation, then use an existing installation
alongside the UNIX installation (see the dual-boot HOWTO for your OS
for more details). Or alternatively use the cabextract utility to
extract Windows install archives to a directory that you want to use
as Wine's Windows tree.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="How-do-I-configure-Wine-to-run-on-my-system">
<para>How do I configure Wine to run on my system?</para>
</question>
<answer>
<para>
Wine requires that you have a config file as
<filename>~/.wine/config</filename>. The format of this file is
explained in the <filename>wine.conf</filename> man page. The file
<filename>documentation/samples/config</filename>
(<ulink url="http://www.winehq.com/source/documentation/samples/config">
http://www.winehq.com/source/documentation/samples/config</ulink>)
contains a config file example. More explicit directions can be
found in the <filename>README</filename> file
(<ulink url="http://www.winehq.com/source/README">
http://www.winehq.com/source/README</ulink>) that will be located in
the base Wine directory after you gunzip and untar the distribution
file.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="How-do-I-upgrade-configuration">
<para>How do I upgrade Wine without losing my working configuration?</para>
</question>
<answer>
<para>
Upgrading the wine installation does not affect the existing wine
configuration. So after upgrading wine you still have the old (working )
wine configuration.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="If-I-use-Windows-which-versions-OK">
<para>If I want to use a Windows install, which versions are OK?</para>
</question>
<answer>
<para>
Either use a classic no-windows install (Wine is getting better all
the time) or use a Win9x install (Win95, 98, 98SE, ME). DON'T
configure Wine to use an NT-based Windows install (NT, Win2K, WinXP).
</para>
<para>
In general, most Windows installations contain vast quantities of garbage
that can confuse Wine and make it less reliable. If you can, it's best to
install the programs you want into Wines fake windows drive.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="If-I-use-Windows-which-one-works-best">
<para>If I use a Windows install with Wine, which one works best?</para>
</question>
<answer>
<para>
As of 02/2002:
</para>
<para>
I'd say Win98SE is the best version to use with Wine, as it's fairly
widespread amongst developers and relatively old. Using Win2K files
is <emphasis>definitely</emphasis> worse than a plain no-windows
Wine install, and Win ME is said to be problematic, too (as probably
no developer uses it). In short: all Win9x &lt;= W98SE are good.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Installing-Visual-Basic-apps-wont-run">
<para>
Installing applications generated by Visual Basic won't run. What
should I do?
</para>
</question>
<answer>
<para>
Make sure you have all the VB runtime libraries installed. You may
need to use the native DLL vbrun60.dll. You can get some from dll-files.com.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="When-I-click-on-exe-file-nothing-happens">
<para>When I click on *.exe file in my file Manager, nothing happens.</para>
</question>
<answer>
<para>
The normal Wine releases don't have .exe extensions registered for
Wine in KDE/Gnome yet. You have to open a terminal window instead
(often an icon showing a "black screen") and type something like:
</para>
<screen>
cd /my/windows/program/directory
wine myprogram.exe
</screen>
<para>
Or alternatively you could download the CodeWeavers Wine preview
which includes .exe extension registration for KDE/Gnome and a nice
setup program.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="bash-wine-Command-not-found-What-can-I-do">
<para>bash "wine: Command not found" What can I do?</para>
</question>
<answer>
<para>
Try to relogin into bash. That might fix it.
</para>
<para>
If it doesn't, then make sure the wine binary is in your
<parameter>PATH</parameter>.
</para>
<para>
Run as root:
</Para>
<screen>
find / -name "wine" -type f -perm +111
</screen>
<para>
to find the path where the wine binary is in. Then check whether
<parameter>PATH</parameter> includes it:
</para>
<screen>
echo $PATH
</screen>
<para>
If not, add that e.g. to <filename>/etc/profile</filename> by doing:
</para>
<screen>
export PATH=$PATH:/path/to/wine/binary
</screen>
<para>
That should help.
</para>
<para>
If you used a package manager (<command>rpm</command> or
<command>apt</command>) - Verify your packages. The package
<filename>winesetuptk.rpm</filename> is only a front-end for
making a meaningful config file, it DOES NOT install the wine
package...
</para>
<para>
For complete packages, use <ulink url="http://www.rpmfind.net/">
www.rpmfind.net</ulink> or the <ulink url="http://www.winehq.org/download/">
Download</ulink> section.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="How-do-I-remove-Wine-from-my-Computer">
<para>How do I remove Wine from my Computer?</para>
</question>
<answer>
<para>
All you have to do is to type:
</para>
<screen>
rm -fR \[/path/\]Wine*
</screen>
<para>
Make sure that you specify the exact path when using the powerful
<command>rm -fR</command> command. If you are afraid that you might
delete something important, or might otherwise delete other files
within your filesystem, <command>cd</command> into each Wine
subdirectory singly and delete the files found there manually,
one file or directory at a time.
</para>
<para>
Neither the Wine developers and programmers, nor the Wine FAQ
author/maintainer, can be held responsible for your deleting any
files in your own filesystem.
</para>
</answer>
</qandaentry>
</qandadiv>
<qandadiv id="About-running-Wine">
<title>About running Wine</title>
<qandaentry>
<question id="How-do-I-run-an-MS-Windows-program">
<para>How do I run an MS Windows program under Wine?</para>
</question>
<answer>
<para>
When invoking Wine, you must specify the entire path to the
executable, or by filename only. For example to run Windows'
solitaire, type any of the following:
</para>
<itemizedlist>
<listitem>
<para>
<command>wine sol</command> or <command>wine sol.exe</command>
(using the search path to locate the file).
</para>
</listitem>
<listitem>
<para>
<command>wine c:\\windows\\sol.exe</command>
(using a DOS filename).
</para>
</listitem>
<listitem>
<para>
<command>wine /usr/windows/sol.exe</command>
(using a UNIX filename).
</para>
</listitem>
<listitem>
<para>
<command>wine "c:\windows\sol.exe"</command>
(using quoted DOS filename).
</para>
</listitem>
</itemizedlist>
<para>
The path of the file will also be added to the path when a full name
is supplied on the command line.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Wine-cannot-find-MS-Windows-on-my-drive">
<para>
I have installed and configured Wine, but Wine cannot find MS
Windows on my drive. Where did I go wrong?
</para>
</question>
<answer>
<para>
If you have a DOS partition, first make sure that you have mounted
it, either by putting the entry into <filename>/etc/fstab</filename>,
or by manually mounting it.
</para>
<para>
Remember too that unless your version of UNIX can see through it, or
you are running a utility that can see through it, your DOS
partition must not be located on a Drivespaced, Doublespaced or
Stackered partition, as neither Linux, FreeBSD, NetBSD or Wine can
natively 'see' files located in these compressed DOS partitions.
</para>
<para>
Check your path statements in the <filename>wine.conf</filename>
file. No capital letters may be used in paths, as they are
automatically converted to lowercase.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Parts-of-my-app-do-not-work-What-is-wrong">
<para>
I was able to get various MS Windows programs to run, but parts of
them do not work. What is wrong?
</para>
</question>
<answer>
<para>
Wine is not complete at this time, so some of each programs'
features may not work. They will in time as more of the MS
Windows API calls are included in Wine.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Menus-do-not-work-how-can-I-exit">
<para>
I have run various MS Windows programs, but since the program menus
do not work, how can I exit these programs?
</para>
</question>
<answer>
<para>
Kill the xterm shell window that you called up to run your MS
Windows program, and the X window that appeared with the program
will be killed too.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="My-app-doesnt-work-what-can-i-do">
<para>
My program doesn't work, what can I do?
</para>
</question>
<answer>
<para>
If you are a programmer and know C, then start debugging
Wine and help us make it better! If you can't, then you will
have to either convince a Wine developer to try and make your
program work (there must be a downloadable version or demo for
that), or hire somebody to do it for you. If this application
is an internal corporate application, you may be able to hire a
Wine developer to do consulting work for you on the matter.
</para>
<para>
Alternatively, you may be able to get the app working by
taking native DLLs from a Microsoft Windows install, and using
them (set the dlls to native in the config file). Not all DLLs
can be replaced that way - in particular DirectX cannot be, nor
can some core system DLLs like user, ntdll, kernel32 etc
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Can-I-use-Wine-with-other-Linux-Distros">
<para>Can I use Wine with SuSE, Peanut or other Linux Distro's?</para>
</question>
<answer>
<para>
You can use Wine on any sufficiently recent Linux installation. The
amount of work getting Wine up and running depends on whether there
are proper packages available or a source compile has to be done.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Does-Wine-work-with-AMD-Processors">
<para>Does Wine work with AMD Processors?</para>
</question>
<answer>
<para>
Yes, it does. Wine should work on any processor compatible with
the Pentium or greater.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Can-I-launch-Unix-app-from-Windows-app">
<para> Can I launch a Unix program from a Windows program?</para>
</question>
<answer>
<para>
Sure, Wine supports that. Just enter the unix program name wherever
a program has something that it's supposed to execute, and it
should just work.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Error-with-installshield-6">
<para>
I get <quote>Error installing iKernel.exe: (0x1400)</quote>
when running an Installshield 6 installer.
</para>
</question>
<answer>
<para>
If you get the error "Error installing iKernel.exe: (0x1400)" at any
point, it's probably because there are leftover processes from a
previous try. You can verify this with the command
</para>
<para><prompt>$ </><command>ps augxw | grep wine</command></para>
<para>
If that command shows old copies of wine running your setup,
you need to kill them before you can run the setup program.
If there are no other Wine programs running, you can kill them
all with the command
</para>
<para><prompt>$ </><command>killall wine</command></para>
<para>
If you're also running Wine programs you care about, you'll
have to kill off the old Setup instances one by one using
kill and the individual PIDs (or perhaps Wine's spiffy Task Manager,
which doesn't exist yet).
</para>
<para>
You should repeat the <command>ps</command> to make sure the old
Wine processes are gone.
</para>
</answer>
</qandaentry>
</qandadiv>
<qandadiv id="Getting-help">
<title>Getting help</title>
<qandaentry>
<question id="Is-there-any-documentation-for-Wine">
<para>Is there any documentation for Wine?</para>
</question>
<answer>
<para>
Yes, see <ulink url="http://www.winehq.org/support.shtml">
http://www.winehq.com/support.shtml.</ulink>
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="I-have-written-some-documententation">
<para>
I couldn't find the answer to my question in the documentation, but
I've written a document explaining how to solve it. What should I do?
</para>
</question>
<answer>
<para>
Updates and additions to the Wine documentation directory should be
sent to the wine-patches mailing list at
<ulink url="http://www.winehq.com/dev.shtml#ml">
http://www.winehq.com/dev.shtml#ml</ulink>. Website and FAQ
additions should be added to the appropriate Wine Knowledgebase
directory.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Is-there-a-Usenet-newsgroup-for-Wine">
<para>Is there a Usenet newsgroup for Wine?</para>
</question>
<answer>
<para>
Yes, and it's called
<ulink url="news:comp.emulators.ms-windows.wine">
comp.emulators.ms-windows.wine</ulink>. The newsgroup serves as a
place for users and developers to discuss Wine, and for minor
announcements for the general public. Major announcements will be
crossposted to other appropriate newsgroups, such as the following:
</para>
<itemizedlist>
<listitem>
<para>
<ulink url="news:comp.os.linux.announce">
comp.os.linux.announce</ulink>
</para>
</listitem>
<listitem>
<para>
<ulink url="news:ccomp.windows.x.announce">
comp.windows.x.announce</ulink>
</para>
</listitem>
<listitem>
<para>
<ulink url="news:ccomp.emulators.announce">
comp.emulators.announce</ulink>
</para>
</listitem>
</itemizedlist>
<para>
If your Usenet site does not carry these newsgroups, please urge
your ISP's sysadmin to add and/or uplink them.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Is-there-a-World-Wide-Web-site-for-Wine">
<para>Is there a World Wide Web site for Wine?</para>
</question>
<answer>
<para>
Wine HQ (<ulink url="http://www.winehq.com">http://www.winehq.com</ulink>) is the official site.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Is-there-an-IRC-channel-for-Wine">
<para>Is there an IRC channel for Wine?</para>
</question>
<answer>
<para>
Sure. It's channel <filename>#WineHQ</filename> on
<filename>irc.freenode.net</filename> see
(<ulink url="http://freenode.net">http://freenode.net</ulink>).
Usually several Wine developers hang out there just to help YOU ;-)
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="I-think-I-found-a-bug-How-do-I-report-it">
<para>
I think I've found a bug. How do I report this bug to the Wine
programming team?
</para>
</question>
<answer>
<para>
Bug reports should be submitted to our online Bugzilla system
(<ulink url="http://bugs.winehq.com">http://bugs.winehq.com/</ulink>).
You should include at least the following:
</para>
<itemizedlist>
<listitem>
<para>
The Wine version tested
</para>
</listitem>
<listitem>
<para>
The Windows application name, including the version, and, if
applicable, a URL the application can be downloaded from
</para>
</listitem>
<listitem>
<para>
A brief description of the bug
</para>
</listitem>
<listitem>
<para>
The relevant part(s) of the output of the Wine debugger
</para>
</listitem>
<listitem>
<para>
A screenshot of the visual problem, if applicable
</para>
</listitem>
</itemizedlist>
<para>
For more information about reporting bugs please see the
<ulink url="http://www.winehq.org/Docs/wine-user/bug-reporting.shtml">
How to report a bug</ulink> section of the Wine Users Guide.
</para>
</answer>
</qandaentry>
</qandadiv>
<qandadiv id="Helping-Wine-or-becoming-a-Wine-developer">
<title>Helping Wine or becoming a Wine developer</title>
<qandaentry>
<question id="How-do-I-become-a-Wine-developer">
<para>How do I become a Wine developer? What do I need to know?</para>
</question>
<answer>
<para>
If you can program C, that's a good start. Download the sources via
CVS, subscribe to the mailing lists, look around the source, and pay
attention to the comp.emulators.ms-windows.wine newsgroup and the
mailing lists (<ulink url="http://www.winehq.com/dev.shtml#ml">http://www.winehq.com/dev.shtml#ml</ulink>). See if there's anything
that you think you can fix or work on. You won't have much trouble
finding areas that need work in Wine (grep for FIXMEs in the source).
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="How-can-I-contribute-to-the-Wine-project">
<para>How can I help contribute to the Wine project, and in what way(s)?</para>
</question>
<answer>
<para>
You can contribute programming or documentation skills, or monetary
or equipment donations, to aid the Wine developers in reaching their
goals.
</para>
<para>
For a list of ideas of how you can help, please consult the
<ulink url="http://www.winehq.com/about/index.php?contrib">
Wine contrib page</ulink>.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="I-want-to-help-beta-test-Wine">
<para>I want to help beta test Wine. How can I do this?</para>
</question>
<answer>
<para>
Wine still consists of some Alpha code at this time. However, anyone
is welcome to download the latest version, and try it out at any
time.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="I-wrote-some-code-I-would-like-to-submit">
<para>
I have written some code that I would like to submit to the Wine
project. How do I go about doing this?
</para>
</question>
<answer>
<para>
Patches are greatly appreciated and should be submitted to the
wine-patches mailing list
(<ulink url="http://www.winehq.com/dev.shtml#ml">http://www.winehq.com/dev.shtml#ml</ulink>). Also see this page for
a description of what happens to submitted patches.
</para>
</answer>
</qandaentry>
</qandadiv>
<qandadiv id="Developing-programs-using-Wine-WineLib">
<title>Developing programs using Wine/WineLib</title>
<qandaentry>
<question id="Can-I-use-Wine-to-port-Win32-sources-to-Unix">
<para>Can I use Wine to port my Win32 sources to Unix?</para>
</question>
<answer>
<para>
That is the idea of Winelib. Right now you may still have some
difficulties, but this is changing all the time. Read the
<ulink url="http://www.winehq.org/Docs/winelib-user/">Winelib User's Guide</ulink> for info.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Will-MFC-work-with-Wine-What-do-I-need-to-do">
<para>Will MFC work with Wine? What do I need to do?</para>
</question>
<answer>
<para>
Wine is not implementing an MFC replacement nor does it intend to.
However it is possible (with a lot of work) to compile the MFC from
source and thus produce an <filename>mfc42.dll.so</filename> library.
</para>
<para>
Please refer to the
<ulink url="http://www.winehq.org/Docs/winelib-user/">Winelib User's Guide</ulink> for how to do this.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="Are-there-commercial-apps-ported-using-Wine">
<para>
Are there any commercial applications which have been ported
using Wine?
</para>
</question>
<answer>
<para>
A few examples of applications using Winelib:
</para>
<itemizedlist>
<listitem>
<para>
Corel's WordPerfect Office Suite
</para>
</listitem>
<listitem>
<para>
Ability Office
(<ulink url="http://www.ability.com/linux/abilitylinux.php">http://www.ability.com/linux/abilitylinux.php</ulink>)
</para>
</listitem>
<listitem>
<para>
IBM's Websphere
(<ulink url="http://www7b.boulder.ibm.com/dl/swws/swwsgddb-p">http://www7b.boulder.ibm.com/dl/swws/swwsgddb-p</ulink>)
</para>
</listitem>
</itemizedlist>
<para>
Many other important applications have already been ported. (we are
speaking of several top 500 applications here)
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="How-can-I-detect-Wine">
<para>How can I detect Wine?</para>
</question>
<answer>
<para>
You really shouldn't want to do this. If there's a quirk in Wine
you need to work around, it's much better to fix it in Wine (after
all you're a developer, so you should be able to gather enough help
and knowledge to fix it for real).
</para>
</answer>
</qandaentry>
</qandadiv>
<qandadiv id="Wine-HQ-issues">
<title>Wine HQ issues</title>
<qandaentry>
<question id="Why-are-the-maillists-set-to-reply-to-author">
<para>
Why are the maillists set to reply to author, not to mailing list?
</para>
</question>
<answer>
<para>
There are very valid reasons for doing so.
</para>
</answer>
</qandaentry>
<qandaentry>
<question id="How-to-unsubscribe-from-the-mailing-lists">
<para>How to unsubscribe from the mailing lists?</para>
</question>
<answer>
<para>
Please see: <ulink url="http://www.winehq.org/development/#ml">http://www.winehq.org/development/#ml</ulink>
</para>
</answer>
</qandaentry>
</qandadiv>
</qandaset>
<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-parent-document:("wine-devel.sgml" "book" "part" "chapter" "")
End:
-->