Sweden-Number/documentation/packaging.sgml

761 lines
25 KiB
Plaintext

<chapter id="packaging">
<title>Packaging Wine</title>
<sect1 id="distributing">
<title>A Small WINE Distribution Guide</title>
<para>
written by Marcus Meissner &lt;Marcus.Meissner@caldera.de>
</para>
<para>
(Extracted from <filename>wine/documentation/distributors</filename>)
</para>
<para>
While packaging WINE for one of the Linux distributions I came
across several points which have not been clarified yet.
Particularly a how-to for WINE packaging distributors is
missing. This document tries to give a brief overview over the
rationales I thought up and how I tried to implement it.
(While the examples use <command>rpm</command> most of this
stuff can be applied to other packagers too.)
</para>
<note>
<para>
YOU SHOULD RECHECK THIS FILE EVERY TWO MONTHS OR SO
(<command>diff -uN</command> comes to my mind here...).
We'll be adding stuff constantly here in order to improve
the Wine environment !
</para>
</note>
<orderedlist>
<listitem>
<para>Rationales</para>
<para>
A WINE install should:
</para>
<itemizedlist>
<listitem>
<para>Not have a world writeable directory (-tree).</para>
</listitem>
<listitem>
<para>
Require only as much user input as needed. It would be
very good if it would not require any at all. Just let
the system administrator do <command>rpm -i
wine.rpm</command> and let any user be able to run
<command>wine sol.exe</command> instantly.
</para>
</listitem>
<listitem>
<para>
Give the user as much flexibility as possible to
install his own applications, do his own configuring
etc.
</para>
</listitem>
<listitem>
<para>
Come as preconfigured as possible, so the user does
not need to change any configuration files.
</para>
</listitem>
<listitem>
<para>Use only as much diskspace as needed per user.</para>
</listitem>
</itemizedlist>
<para>
A WINE install needs:
</para>
<itemizedlist>
<listitem>
<para>
A writeable <filename>C:\</filename> directory
structure on a per user basis. Applications do dump
<filename>.ini</filename> files into
<filename>c:\windows</filename>, installers dump
<filename>.exe</filename>, <filename>.dll</filename>
and more into <filename>c:\windows\</filename> and
subdirectories or into <filename>C:\Program
Files\</filename>.
</para>
</listitem>
<listitem>
<para>
The <filename>.exe</filename> and
<filename>.dll</filename> from a global read-only
Windows installation to be found by applications.
</para>
</listitem>
<listitem>
<para>
Some special <filename>.dll</filename> and
<filename>.exe</filename> files in the
<filename>windows\system</filename> directory, since
applications directly check for their presence.
</para>
</listitem>
<listitem>
<para>Some special program environment.</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>Implementation</para>
<orderedlist inheritnum="inherit">
<listitem>
<para>Building the package</para>
<para>
WINE is configured the usual way (depending on your
build environment). The "prefix" is chosen using your
application placement policy
(<filename>/usr/</filename>,
<filename>/usr/X11R6/</filename>,
<filename>/opt/wine/</filename> or similar). The
configuration files (<filename>wine.conf</filename>,
<filename>wine.userreg</filename>,
<filename>wine.systemreg</filename>) are targeted for
<filename>/etc/wine/</filename> (rationale: FHS 2.0,
multiple readonly configuration files of a package).
</para>
<para>
Example (split this into <literal>%build</literal> and
<literal>%install</literal> section for
<command>rpm</command>):
</para>
<screen>
CFLAGS=$RPM_OPT_FLAGS \
./configure --prefix=/usr/X11R6 --sysconfdir=/etc/wine/ --enable-dll
make
BR=$RPM_BUILD_ROOT
make install prefix=$BR/usr/X11R6/ sysconfdir=$BR/etc/wine/
install -d $BR/etc/wine/
install -m 644 wine.ini $BR/etc/wine/wine.conf
# Put all our dlls in a seperate directory. (this works only if
# you have a buildroot)
install -d $BR/usr/X11R6/lib/wine
mv $BR/usr/X11R6/lib/lib* $BR/usr/X11R6/lib/wine/
# the clipboard server is started on demand.
install -m 755 windows/x11drv/wineclipsrv $BR/usr/X11R6/bin/
# The WINE server is needed.
install -m 755 server/wineserver $BR/usr/X11R6/bin/
</screen>
<para>
Here we unfortunately do need to create
<filename>wineuser.reg</filename> and
<filename>winesystem.reg</filename> from the WINE
distributed <filename>winedefault.reg</filename>. This
can be done using <command>./regapi</command> once for
one example user and then reusing his
<filename>.wine/user.reg</filename> and
<filename>.wine/system.reg</filename> files.
<note>
<title>FIXME</title>
<para>this needs to be done better</para>
</note>
</para>
<screen>
install -m 644 wine.sytemreg $BR/etc/wine/
install -m 644 wine.userreg $BR/etc/wine/
</screen>
<para>
There are now a lot of libraries generated by the
build process, so a seperate library directory should
be used.
</para>
<screen>
install -d 755 $BR/usr/X11R6/lib/
mv $BR/
</screen>
<para>
You will need to package the files:
</para>
<screen>
$prefix/bin/wine, $prefix/bin/dosmod, $prefix/lib/wine/*
$prefix/man/man1/wine.1, $prefix/include/wine/*,
$prefix/bin/wineserver, $prefix/bin/wineclipsrv
%config /etc/wine/*
%doc ... choose from the toplevel directory and documentation/
</screen>
<para>
The post-install script:
</para>
<screen>
if ! grep -q /usr/X11R6/lib/wine /etc/ld.so.conf; then
echo "/usr/X11R6/lib/wine" &gt;&gt; /etc/ld.so.conf
fi
/sbin/ldconfig
</screen>
<para>
The post-uninstall script:
</para>
<screen>
if [ "$1" = 0 ]; then
perl -ni -e 'print unless m:/usr/X11R6/lib/wine:;' /etc/ld.so.conf
fi
/sbin/ldconfig
</screen>
</listitem>
<listitem>
<para>Creating a good default configuration file</para>
<para>
For the rationales of needing as less input from the
user as possible arises the need for a very good
configuration file. The one supplied with WINE is
currently lacking. We need:
</para>
<itemizedlist>
<listitem>
<para>
[Drive X]:
</para>
<itemizedlist>
<listitem>
<para>
A for the floppy. Specify your distributions
default floppy mountpoint here.
</para>
<programlisting>
Path=/auto/floppy
</programlisting>
</listitem>
<listitem>
<para>
C for the <filename>C:\</filename> directory.
Here we use the users homedirectory, for most
applications do see <filename>C:\</filename>
as root-writeable directory of every windows
installation and this basically is it in the
UNIX-user context.
</para>
<programlisting>
Path=${HOME}
</programlisting>
</listitem>
<listitem>
<para>
R for the CD-Rom drive. Specify your
distributions default CD-ROM drives mountpoint
here.
</para>
<programlisting>
Path=/auto/cdrom
</programlisting>
</listitem>
<listitem>
<para>
T for temporary storage. We do use
<filename>/tmp/</filename> (rationale: between
process temporary data belongs to
<filename>/tmp/</filename>, FHS 2.0)
</para>
</listitem>
<listitem>
<para>
W for the original Windows installation. This
drive points to the
<filename>windows\</filename> subdirectory of
the original windows installation. This avoids
problems with renamed
<filename>windows</filename> directories (as
for instance <filename>lose95</filename>,
<filename>win</filename> or
<filename>sys\win95</filename>). During
compile/package/install we leave this to be
<filename>/</filename>, it has to be
configured after the package install.
</para>
</listitem>
<listitem>
<para>
Z for the UNIX Root directory. This avoids any
problems with "could not find drive for
current directory" users occasionaly complain
about in the newsgroup and the ircchannel. It
also makes the whole directory structure
browseable. The type of Z should be network,
so applications expect it to be readonly.
</para>
<programlisting>
Path=/
</programlisting>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>
[wine]:
</para>
<screen>
Windows=c:\windows\ (the windows/ subdirectory in the users
homedirectory)
System=c:\windows\system\ (the windows/system subdirectory in the users
homedirectory)
Path=c:\windows;c:\windows\system;c:\windows\system32;w:\;w:\system;w:\system32;
; Using this trick we have in fact two windows installations in one, we
; get the stuff from the readonly installation and can write to our own.
Temp=t:\ (the TEMP directory)
</screen>
</listitem>
<listitem>
<para>[Tweak.Layout]</para>
<screen>
WineLook=win95 (just the coolest look ;)
</screen>
</listitem>
<listitem>
<para>
Possibly modify the [spooler], [serialports] and
[parallelports] sections.
</para>
<note>
<title>FIXME</title>
<para>possibly more, including printer stuff.</para>
</note>
</listitem>
</itemizedlist>
<para>Add this prepared configuration file to the package.</para>
</listitem>
<listitem>
<para>Installing WINE for the system administrator</para>
<para>
Install the package using the usual packager
<command>rpm -i wine.rpm</command>. You may edit
<filename>/etc/wine/wine.conf</filename>, [Drive W],
to point to a possible windows installation right
after the install. That's it.
</para>
<para>
Note that on Linux you should somehow try to add the
<option>unhide</option> mount option (see <command>man
mount</command>) to the CD-ROM entry in
<filename>/etc/fstab</filename> during package
install, as several stupid Windows programs mark some
setup (!) files as hidden (ISO9660) on CD-ROMs, which
will greatly confuse users as they won't find their
setup files on the CD-ROMs as they were used on
Windows systems when <option>unhide</option> is not
set ;-\ And of course the setup program will complain
that <filename>setup.ins</filename> or some other mess
is missing... If you choose to do so, then please make
this change verbose to the admin.
</para>
</listitem>
<listitem>
<para>Installing WINE for the user</para>
<para>
The user will need to run a setup script before the
first invocation of WINE. This script should:
</para>
<itemizedlist>
<listitem>
<para>
Copy <filename>/etc/wine/wine.conf</filename> for
user modification.
</para>
</listitem>
<listitem>
<para>
Allow specification of the original windows
installation to use (which modifies the copied
<filename>wine.conf</filename> file).
</para>
</listitem>
<listitem>
<para>
Create the windows directory structure
(<filename>c:\windows</filename>,
<filename>c:\windows\system</filename>,
<filename>c:\windows\Start Menu\Programs</filename>,
<filename>c:\Program Files</filename>,
<filename>c:\Desktop</filename>, etc.)
</para>
</listitem>
<listitem>
<para>
Symlink all <filename>.dll</filename> and
<filename>.exe</filename> files from the original
windows installation to the
<filename>windows</filename> directory. Why? Some
programs reference "%windowsdir%/file.dll" or
"%systemdir%/file.dll" directly and fail if they
are not present.
</para>
<para>
This will give a huge number of symlinks, yes.
However, if an installer later overwrites on of
those files, it will overwrite the symlink (so
that the file now lies in the
<filename>windows/</filename> subdirectory).
</para>
<note>
<title>FIXME</title>
<para>Not sure this is needed for all files.</para>
</note>
</listitem>
<listitem>
<para>
On later invocation the script might want to
compare regular files in the users windows
directories and in the global windows directories
and replace same files by symlinks (to avoid
diskspace problems).
</para>
</listitem>
</itemizedlist>
</listitem>
</orderedlist>
</listitem>
</orderedlist>
<para>Done.</para>
<para>
This procedure requires:
</para>
<itemizedlist>
<listitem>
<para>Much thought and work from the packager (1x)</para>
</listitem>
<listitem>
<para>
No work for the sysadmin. Well except one <command>rpm
-i</command> and possible one edit of the configuration
file.
</para>
</listitem>
<listitem>
<para>
Some or no work from the user, except running the per-user
setup script once.
</para>
</listitem>
<listitem>
<para>It scales well and suffices most of the rationales.</para>
</listitem>
</itemizedlist>
<bridgehead>Sample <filename>wine.ini</filename> for OpenLinux 2.x:</bridgehead>
<programlisting>
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; Path=xxx (Unix path for drive root)
;; Type=xxx (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; Label=xxx (drive label, at most 11 characters)
;; Serial=xxx (serial number, 8 characters hexadecimal number)
;; Filesystem=xxx (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; Device=/dev/xx (only if you want to allow raw device access)
;;
;
;
; Floppy 'A' and 'B'
;
; OpenLinux uses an automounter under /auto/, so we use that too.
;
[Drive A]
Path=/auto/floppy/
Type=floppy
Label=Floppy
Serial=87654321
Device=/dev/fd0
Filesystem=win95
;
; Comment in ONLY if you have a second floppy or the automounter hangs
; for 5 minutes.
;
;[Drive B]
;Path=/auto/floppy2/
;Type=floppy
;Label=Floppy
;Serial=87654321
;Device=/dev/fd1
;Filesystem=win95
;
; Drive 'C' links to the users homedirectory.
;
; This must point to a writeable directory structure (not your readonly
; mounted DOS partitions!) since programs want to dump stuff into
; "Program Files/" "Programme/", "windows/", "windows/system/" etc.
;
; The basic structure is set up using the config script.
;
[Drive C]
Path=${HOME}
Type=hd
Label=MS-DOS
Filesystem=win95
;
; /tmp/ directory
;
; The temp drive (and directory) points to /tmp/. Windows programs fill it
; with junk, so it is approbiate.
;
[Drive T]
Path=/tmp
Type=hd
Label=Tmp Drive
Filesystem=win95
;
; 'U'ser homedirectory
;
; Just in case you want C:\ elsewhere.
;
[Drive U]
Path=${HOME}
Type=hd
Label=Home
Filesystem=win95
;
; CD-'R'OM drive (automounted)
;
; The default cdrom drive.
;
; If an application (or game) wants a specific CD-ROM you might have to
; temporary change the Label to the one of the CD itself.
;
; How to read them is described in /usr/doc/wine-cvs-xxxxx/cdrom-labels.
;
[Drive R]
Path=/auto/cdrom
Type=cdrom
Label=CD-Rom
Filesystem=win95
;
; The drive where the old windows installation resides (it points to the
; windows/ subdirectory).
;
; The Path is modified by the winesetup script.
;
[Drive W]
Path=/
Type=network
Label=Windows
Filesystem=win95
;
; The UNIX Root directory, so all other programs and directories are reachable.
;
; type network is used to tell programs to not write here.
;
[Drive Z]
Path=/
Type=network
Label=ROOT
Filesystem=win95
;
; Standard Windows path entries. WINE will not work if they are incorrect.
;
[wine]
;
; The windows/ directory. It must be writeable, for programs write into it.
;
Windows=c:\windows
;
; The windows/system/ directory. It must be writeable, for especially setup
; programs install dlls in there.
;
System=c:\windows\system
;
; The temp directory. Should be cleaned regulary, since install programs leave
; junk without end in there.
;
Temp=t:\
;
; The dll search path. It should contain at least:
; - the windows and the windows/system directory of the user.
; - the global windows and windows/system directory (from a possible readonly
; windows installation either on msdos filesystems or somewhere in the UNIX
; directory tree)
; - any other windows style directories you want to add.
;
Path=c:\windows;c:\windows\system;c:\windows\system32;t:\;w:\;w:\system;w:\system32
;
; Outdated and no longer used. (but needs to be present).
;
SymbolTableFile=./wine.sym
# &lt;wineconf&gt;
;
; Dll loadorder defaults. No need to modify.
;
[DllDefaults]
EXTRA_LD_LIBRARY_PATH=${HOME}/wine/cvs/lib
DefaultLoadOrder = native, elfdll, so, builtin
;
; What 32/16 dlls belong to each other (context wise). No need to modify.
;
[DllPairs]
kernel = kernel32
gdi = gdi32
user = user32
commdlg = comdlg32
commctrl= comctl32
ver = version
shell = shell32
lzexpand= lz32
mmsystem= winmm
msvideo = msvfw32
winsock = wsock32
;
; What type of dll to use in their respective loadorder.
;
[DllOverrides]
kernel32, gdi32, user32 = builtin
kernel, gdi, user = builtin
toolhelp = builtin
comdlg32, commdlg = elfdll, builtin, native
version, ver = elfdll, builtin, native
shell32, shell = builtin, native
lz32, lzexpand = builtin, native
commctrl, comctl32 = builtin, native
wsock32, winsock = builtin
advapi32, crtdll, ntdll = builtin, native
mpr, winspool = builtin, native
ddraw, dinput, dsound = builtin, native
winmm, mmsystem = builtin
msvideo, msvfw32 = builtin, native
mcicda.drv, mciseq.drv = builtin, native
mciwave.drv = builtin, native
mciavi.drv, mcianim.drv = native, builtin
w32skrnl = builtin
wnaspi32, wow32 = builtin
system, display, wprocs = builtin
wineps = builtin
;
; Options section. Does not need to be edited.
;
[options]
; allocate how much system colors on startup. No need to modify.
AllocSystemColors=100
;;
; Font specification. You usually do not need to edit this section.
;
; Read documentation/fonts before adding aliases
;
[fonts]
; The resolution defines what fonts to use (usually either 75 or 100 dpi fonts,
; or nearest match).
Resolution = 96
; Default font
Default = -adobe-times-
;
; serial ports used by "COM1" "COM2" "COM3" "COM4". Useful for applications
; that try to access serial ports.
;
[serialports]
Com1=/dev/ttyS0
Com2=/dev/ttyS1
Com3=/dev/modem,38400
Com4=/dev/modem
;
; parallel port(s) used by "LPT1" etc. Useful for applications that try to
; access these ports.
;
[parallelports]
Lpt1=/dev/lp0
;
; What spooling program to use on printing.
; Use "|program" or "filename", where the output will be dumped into.
;
[spooler]
LPT1:=|lpr
LPT2:=|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -
LPT3:=/dev/lp3
;
; Allow port access to WINE started by the root user. Useful for some
; supported devices, but it can make the system unstable.
; Read /usr/doc/wine-cvs-xxxxx/ioport-trace-hints.
;
[ports]
;read=0x779,0x379,0x280-0x2a0
;write=0x779,0x379,0x280-0x2a0
; debugging, not need to be modified.
[spy]
Exclude=WM_SIZE;WM_TIMER;
;
; What names for the registry datafiles, no need to modify.
;
[Registry]
; Paths must be given in /dir/dir/file.reg format.
; Wine will not understand dos file names here...
;UserFileName=xxx ; alternate registry file name (user.reg)
;LocalMachineFileName=xxx ; (system.reg)
;
; Layout/Look modifications. Here you can switch with a single line between
; windows 3.1 and windows 95 style.
; This does not change WINE behaviour or reported versions, just the look!
;
[Tweak.Layout]
;; WineLook=xxx (supported styles are 'Win31'(default), 'Win95', 'Win98')
WineLook=Win95
;
; What programs to start on WINE startup. (you should probably leave it empty)
;
[programs]
Default=
Startup=
; defunct section.
[Console]
;XtermProg=nxterm
;InitialRows=25
;InitialColumns=80
;TerminalType=nxterm
# &lt;/wineconf&gt;
</programlisting>
</sect1>
</chapter>
<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-parent-document:("wine-doc.sgml" "book" "part" "chapter" "")
End:
-->