Sweden-Number/documentation/running.sgml

253 lines
10 KiB
Plaintext

<chapter id="running">
<title>Running Wine</title>
<para>
Written by &name-john-sheets; <email>&email-john-sheets;</email>
</para>
<sect1 id="running-wine">
<title>How to run Wine</title>
<para>
Wine is a very complicated piece of software with many ways to
adjust how it runs. With very few exceptions, you can
activate the same set of features through the <link
linkend="configuring">configuration file </link> as you can
with command-line parameters. In this chapter, we'll briefly
discuss these parameters, and match them up with their
corresponding configuration variables.
</para>
<para>
You can invoke the <command>wine --help</command> command to
get a listing of all Wine's command-line parameters:
</para>
<para>
<screen>
Usage: ./wine [options] program_name [arguments]
Options:
--debugmsg name Turn debugging-messages on or off
--dll name Enable or disable built-in DLLs
--dosver x.xx DOS version to imitate (e.g. 6.22)
Only valid with --winver win31
--help,-h Show this help message
--managed Allow the window manager to manage created windows
--version,-v Display the Wine version
--winver Version to imitate (win95,nt40,win31,nt2k,win98,nt351,win30,win20)
</screen>
</para>
<para>
You can specify as many options as you want, if any.
Typically, you will want to have your configuration file set
up with a sensible set of defaults; in this case, you can run
<command>wine</command> without explicitly listing any
options. In rare cases, you might want to override certain
parameters on the command line.
</para>
<para>
After the options, you should put the name of the file you
want <command>wine</command> to execute. If the executable is
in the <parameter>Path</parameter> parameter in the
configuration file, you can simply give the executable file
name. However, if the executable is not in
<parameter>Path</parameter>, you must give the full path to
the executable (in Windows format, not UNIX format!). For
example, given a <parameter>Path</parameter> of the following:
</para>
<screen>
[wine]
"Path"="c:\windows;c:\windows\system;e:\;e:\test;f:\"
</screen>
<para>
You could run the file
<filename>c:\windows\system\foo.exe</filename> with:
</para>
<screen>
<prompt>$</prompt> <userinput>wine foo.exe</userinput>
</screen>
<para>
However, you would have to run the file
<filename>c:\myapps\foo.exe</filename> with this command:
</para>
<screen>
<prompt>$</prompt> <userinput>wine c:\myapps\foo.exe</userinput>
</screen>
<para>
Finally, if you want to pass any parameters to your windows
application, you can list them at the end, just after the
executable name. Thus, to run the imaginary
<command>foo.exe</command> Windows application with its
<parameter>/advanced</parameter> mode parameter, while
invoking Wine in <link
linkend="managed-parameter"><parameter>--managed</parameter>
mode</link>, you would do something like this:
</para>
<screen>
<prompt>$</prompt> <userinput>wine --managed foo.exe /advanced</userinput>
</screen>
<para>
In other words, options that affect Wine should come
<emphasis>before</emphasis> the Windows program name, while
options that affect the Windows program should come
<emphasis>after</emphasis> it.
</para>
</sect1>
<sect1 id="command-line-options">
<title>Command-Line Options</title>
<sect2 id="config-parameter">
<title>--debugmsg [channels]</title>
<para>
Wine isn't perfect, and many Windows applications still
don't run without bugs under Wine (but then, many of them
don't run without bugs under native Windows either!). To
make it easier for people to track down the causes behind
each bug, Wine provides a number of <firstterm>debug
channels</firstterm> that you can tap into.
</para>
<para>
Each debug channel, when activated, will trigger logging
messages to be displayed to the console where you invoked
<command>wine</command>. From there you can redirect the
messages to a file and examine it at your leisure. But be
forewarned! Some debug channels can generate incredible
volumes of log messages. Among the most prolific offenders
are <parameter>relay</parameter> which spits out a log
message every time a win32 function is called,
<parameter>win</parameter> which tracks windows message
passing, and of course <parameter>all</parameter> which is
an alias for every single debug channel that exists. For a
complex application, your debug logs can easily top 1 MB and
higher. A <parameter>relay</parameter> trace can often
generate more than 10 MB of log messages, depending on how
long you run the application. Logging does slow down Wine
quite a bit, so don't use <parameter>--debugmsg</parameter>
unless you really do want log files.
</para>
<para>
Within each debug channel, you can further specify a
<firstterm>message class</firstterm>, to filter out the
different severities of errors. The four message classes
are:
<simplelist type="inline">
<member><parameter>trace</parameter></member>
<member><parameter>fixme</parameter></member>
<member><parameter>warn</parameter></member>
<member><parameter>err</parameter></member>
</simplelist>.
</para>
<para>
To turn on a debug channel, use the form
<parameter>class+channel</parameter>. To turn it off, use
<parameter>class-channel</parameter>. To list more than one
channel in the same <parameter>--debugmsg</parameter>
option, separate them with commas. For example, to request
<parameter>warn</parameter> class messages in the
<parameter>heap</parameter> debug channel, you could invoke
<command>wine</command> like this:
</para>
<screen>
<prompt>$</prompt> <userinput>wine --debugmsg warn+heap <replaceable>program_name</replaceable></userinput>
</screen>
<para>
If you leave off the message class, <command>wine</command>
will display messages from all four classes for that channel:
</para>
<screen>
<prompt>$</prompt> <userinput>wine --debugmsg +heap <replaceable>program_name</replaceable></userinput>
</screen>
<para>
If you wanted to see log messages for everything except the
relay channel, you might do something like this:
</para>
<screen>
<prompt>$</prompt> <userinput>wine --debugmsg +all,-relay <replaceable>program_name</replaceable></userinput>
</screen>
<para>
Here is a master list of all the debug channels and classes
in Wine. More channels might be added to (or subtracted
from) later versions.
</para>
<screen>
all accel advapi animate aspi atom avifile bitblt
bitmap caret cdrom class clipboard clipping combo comboex
comm commctrl commdlg console crtdll cursor datetime dc
ddeml ddraw debug debugstr delayhlp dialog dinput dll
dosfs dosmem dplay driver dsound edit elfdll enhmetafile
event exec file fixup font gdi global graphics
header heap hook hotkey icmp icon imagehlp imagelist
imm int int10 int16 int17 int19 int21 int31
io ipaddress joystick key keyboard ldt listbox listview
local mci mcianim mciavi mcicda mcimidi mciwave mdi
menu message metafile midi mmaux mmio mmsys mmtime
module monthcal mpr msacm msg msvideo nativefont nonclient
ntdll odbc ole opengl pager palette pidl print
process profile progress prop propsheet psapi psdrv ras
rebar reg region relay resource richedit scroll segment
seh selector sendmsg server setupapi setupx shell snoop
sound static statusbar storage stress string syscolor system
tab tape tapi task text thread thunk timer
toolbar toolhelp tooltips trackbar treeview ttydrv tweak typelib
updown ver virtual vxd wave win win16drv win32
wing wininet winsock winspool wnet x11 x11drv
</screen>
<para>
For more details about debug channels, check out the
<ulink url="http://wine.codeweavers.com/docs/wine-devel/">
The Wine Developer's Guide</ulink>.
</para>
</sect2>
<sect2>
<title>--dll</title>
<para>
</para>
</sect2>
<sect2>
<title>--dosver</title>
<para>
</para>
</sect2>
<sect2>
<title>--help</title>
<para>
</para>
</sect2>
<sect2 id="managed-parameter">
<title>--managed</title>
<para>
</para>
</sect2>
<sect2>
<title>--version</title>
<para>
</para>
</sect2>
<sect2>
<title>--winver</title>
<para>
</para>
</sect2>
</sect1>
</chapter>
<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-parent-document:("wine-doc.sgml" "set" "book" "chapter" "")
End:
-->