Sweden-Number/documentation/winelib-user.sgml

1707 lines
74 KiB
Plaintext

<book id="index-winelib">
<bookinfo>
<title>Winelib User Guide</title>
</bookinfo>
<chapter id="winelib-introduction">
<title id="introduction.title">Introduction</title>
<para>
Winelib is a development toolkit which allows you to compile your
Windows applications on Unix.
</para>
<para>
Most of Winelib's code consists of the Win32 API implementation.
Fortunately this part is 100 percent shared with Wine. The remainder
consists of Windows compatible headers and tools like the resource
compiler (and even these are used when compiling Wine).
</para>
<para>
Thanks to the above, Winelib supports most C and C++ 32bit source code,
resource and message files, and can generate graphical or console
applications as well as dynamic libraries.
</para>
<para>
What is not supported is 16bit source code as the types it depends on
(especially segmented pointers) are not supported by Unix compilers.
Also missing are some of the more exotic features of Microsoft's
compiler like native COM support and structured exception handling.
So you may need to perform some modifications in your code when
recompiling your application with Winelib. This guide is here to help
you in this task.
</para>
<para>
What you gain by recompiling your application with Winelib is the
ability to make calls to Unix APIs, directly from your
Windows source code. This allows for a better integration with the
Unix environment than is allowed by runnning an unmodified Windows
application running in Wine. Another benefit is that a Winelib
application can relatively easily be recompiled on a non-Intel
architecture and run there without the need for a slow software
emulation of the processor.
</para>
</chapter>
<chapter id="winelib-requirements">
<title id="requirements.title">System requirements</title>
<para>
The requirements for Winelib are similar to those for Wine.
</para>
<para>
Basically if you can run Wine on your computer then you can run
Winelib. But the converse is not true. You can also build Winelib
and Winelib applications on platforms not supported by Wine,
typically platforms with a non i386 processor. But this is still
pretty much an uncharted territory. It would be more reasonable to
first target one of the more mundane i386-based platforms first.
</para>
<para>
The main difference is that the compiler becomes much more important.
It is highly recommended that you use gcc, g++,
and the GNU binutils. The more recent your gcc compiler the better.
For any serious amount of code you should not consider anything older
than gcc 2.95.2. The latest gcc snapshots contain some useful bug
fixes and much better support for anonymous structs and unions. This
can help reduce the number of changes you have to do in your code but
these are not stable releases of the compiler so you may not want to
use them in production.
</para>
</chapter>
<chapter id="winelib-getting-started">
<title id="getting-started.title">Getting Started</title>
<sect1 id="winemaker-introduction">
<title id="winemaker-introduction.title">Winemaker introduction</title>
<para>
So what is needed to compile a Windows application with Winelib?
Well, it really depends on the complexity of your application but
here are some issues that are shared by all applications:
</para>
<itemizedlist>
<listitem>
<para>
the case of your files may be bad. For example they could be
in all caps: <filename>HELLO.C</filename>. It's not very nice to
work with and probably not what you intended.
</para>
</listitem>
<listitem>
<para>
then the case of the filenames in your include statements may be
wrong: maybe they include 'Windows.h' instead of 'windows.h'.
</para>
</listitem>
<listitem>
<para>
your include statements may use '\' instead of '/'. '\' is not
recognized by Unix compilers while '/' is recognized in both
environments.
</para>
</listitem>
<listitem>
<para>
you will need to perform the usual Dos to Unix text file conversion
otherwise you'll get in trouble when the compiler considers that
your '\' is not at the end of the line since it is followed by a
pesky carriage return.
</para>
</listitem>
<listitem>
<para>
you will have to write new makefiles.
</para>
</listitem>
</itemizedlist>
<para>
The best way to take care of all these issues is to use winemaker.
</para>
<para>
Winemaker is a perl script which is designed to help you bootstrap
the conversion of your Windows projects to Winelib. In order to do
this it will go analyze your code, fixing the issues listed above
and generate autoconf-based Makefiles.
</para>
<para>
Let's suppose that Wine/Winelib has been installed in the
<filename class="Directory">/usr/local/wine</filename>
directory, and that you are already in the top directory of your
sources. Then converting your project to Winelib may be as simple
as just running the three commands below:
</para>
<programlisting>
$ winemaker --lower-uppercase
$ ./configure --with-wine=/usr/local/wine
$ make
</programlisting>
<para>
But of course things are not always that simple which is why we have
this guide at all.
</para>
</sect1>
<sect1 id="winemaker-guide">
<title id="winemaker-guide.title">Step by step guide</title>
<para>
Let's retrace the steps above in more details.
</para>
<variablelist>
<varlistentry>
<term><option>Getting the source</option></term>
<listitem>
<para>
First if you can try to get the sources together with the
executables/libraries that they build. In the current state of
winemaker having these around can help it guess what it is that
your project is trying to build. Later, when it is able to
understand Visual C++ projects, and if you use them, this will
no longer be necessary. Usually the executables and libraries
are in a <filename class="Directory">Release</filename> or
<filename class="Directory">Debug</filename> subdirectory of the
directory where the sources are. So it's best if you can
transfer the source files and either of these directories to
Linux. Note that you don't need to transfer the
<filename>.obj</filename>, <filename>.pch</filename>,
<filename>.sbr</filename> and other files that also reside in
these directories; especially as they tend to be quite big.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>cd &lt;root_dir&gt;</option></term>
<listitem>
<para>
Then go to the root directory where are your source files.
Winemaker can deal with a whole directory hierarchy at once so
you don't need to go into a leaf directory, quite the contrary.
Winemaker will automatically generate makefiles in each
directory where one is required, and will generate a global
makefile so that you can rebuild all your executables and
libraries with a single <command>make</command> command.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>Making the source writable</option></term>
<listitem>
<para>
Then make sure you have write access to your sources. It may
sound obvious, but if you copied your source files from a
CD-ROM or if they are in Source Safe on Windows, chances are
that they will be read-only.
But Winemaker needs write access so that it can fix them. You
can arrange that by running <command>chmod -R u+w .</command>.
Also you will want to make sure that you have a backup copy of
your sources in case something went horribly wrong, or more
likely, just for reference at a later point. If you use a
version control system you're already covered.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>Running winemaker</option></term>
<listitem>
<para>
Then you'll run winemaker. Here are the options you will most
likely want to use.
</para>
<variablelist>
<varlistentry>
<term><option>--lower-uppercase</option></term>
<term><option>--lower-all</option></term>
<listitem>
<para>
These options specify how to deal with files, and
directories, that have an 'incorrect' case.
<option>--lower-uppercase</option> specifies they should
only be renamed if their name is all uppercase. So files
that have a mixed case, like 'Hello.c' would not be
renamed. <option>--lower-all</option> will rename any
file. If neither is specified then no file or directory
will be renamed, almost. As you will see
<link linkend="renaming">later</link> winemaker may
still have to rename some files.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>--nobackup</option></term>
<listitem>
<para>
Winemaker normally makes a backup of all the files in which
it does more than the standard Dos to Unix conversion.
But if you already have (handy) copies of these files
elsewhere you may not need these so you should use this
option.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>--dll</option></term>
<term><option>--console</option></term>
<listitem>
<para>
These option lets winemaker know what kind of target you are
building. If you have the windows library in your source
hierarchy then you should not need to specify
<option>--dll</option>. But if you have console executables
then you will need to use the corresponding option.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>--mfc</option></term>
<listitem>
<para>
This option tells winemaker that you are building an MFC
application/library.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-Dmacro[=defn]</option></term>
<term><option>-Idir</option></term>
<term><option>-Ldir</option></term>
<term><option>-idll</option></term>
<term><option>-llibrary</option></term>
<listitem>
<para>
The <option>-i</option> specifies a Winelib library to
import via the <link linkend="spec-file">spec file</>
mechanism. Contrast this with the <option>-l</option>
which specifies a Unix library to link with. The other
options work the same way they would with a C
compiler. All are applied to all the targets found.
When specifying a directory with either
<option>-I</option> or <option>-L</option>, winemaker
will prefix a relative path with
<literal>$(TOPDIRECTORY)/</literal> so that it is valid
from any of the source directories. You can also use a
variable in the path yourself if you wish (but don't
forget to escape the '$'). For instance you could specify
<literal>-I\$(WINELIB_INCLUDE_ROOT)/msvcrt</literal>.
</para>
</listitem>
</varlistentry>
</variablelist>
<para>
So your command may finally look like:
<literal>winemaker --lower-uppercase -Imylib/include</literal>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term id="renaming"><option>File renaming</option></term>
<listitem>
<para>
When you execute winemaker it will first rename files to bring
their character case in line with your expectations and so that they can
be processed by the makefiles. This later category implies that
files with a non lowercase extension will be renamed so that the
extension is in lowercase. So, for instance,
<filename>HELLO.C</filename> will be renamed to
<filename>HELLO.c</filename>. Also if a file or directory name
contains a space or a dollar, then this
character will be replaced with an underscore. This is because
these characters cause problems with current versions of autoconf
(2.13) and make (3.79).
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>Source modifications and makefile generation</option></term>
<listitem>
<para>
winemaker will then proceed to modify the source files so that
they will compile more readily with Winelib. As it does so it
may print warnings when it has to make a guess or identifies a
construct that it cannot correct. Finally it will generate the
autoconf-based makefiles. Once all this is done you can review
the changes that winemaker did to your files by using
<command>diff -uw</command>. For instance:
<command>diff -uw hello.c.bak hello.c</command>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>Running the configure script</option></term>
<listitem>
<para>
Before you run <command>make</command> you must run the
autoconf <command>configure</command> script. The goal of this
step is to analyze your system and generate customized
makefiles from the <filename>Makefile.in</filename> files. This
is also when you have to tell where Winelib resides on your
system. If wine is installed in a single directory or you have
the Wine sources compiled somewhere then you can just run
<command>./configure --with-wine=/usr/local/bin</command>
or <command>./configure --with-wine=~/wine</command>
respectively.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>Running make</option></term>
<listitem>
<para>
This is a pretty simple step: just type <command>make</command>
and voila, you should have all your executables and libraries.
If this did not work out, then it means that you will have to
read this guide further to:
<itemizedlist>
<listitem>
<para>
review the <filename>Makefile.in</filename> files to
adjust the default compilation and link options set by
winemaker. See the <xref linkend="source-analysis"
endterm="source-analysis.title"> section for some hints.
</para>
</listitem>
<listitem>
<para>
fix the portability issues in your sources. See
<xref linkend="portability-issues"
endterm="portability-issues.title"> for more details.
</para>
</listitem>
</itemizedlist>
</para>
</listitem>
</varlistentry>
</variablelist>
</sect1>
</chapter>
<chapter id="portability-issues">
<title id="portability-issues.title">Portability issues</title>
<sect1 id="anon">
<title id="anon.title">Anonymous unions/structs</title>
<para>
Anonymous structs and unions support depends heavily on the compiler.
The best support is provided by gcc/g++ 2.96 and later. But these
versions of gcc come from the development branch so you may want to
hold off before using them in production. g++ 2.95 supports anonymous
unions but not anonymous structs and gcc 2.95 supports neither. Older
versions of gcc/g++ have no support for either.
since it is anonymous unions that are the most frequent in the
windows headers, you should at least try to use gcc/g++ 2.95.
</para>
<para>
But you are stuck with a compiler that does not support anonymous
structs/unions all is not lost. The Wine headers should detect this
automatically and define <varname>NONAMELESSUNION</varname> /
<varname>NONAMELESSSTRUCT</varname>. Then any anonymous union will
be given a name
<literal>u</literal> or <literal>u2</literal>, <literal>u3</literal>,
etc. to avoid name clashes. You will then have to modify your code to
include those names where appropriate.
</para>
<para>
The name that Wine adds to anonymous unions should match that used
by the Windows headers. So all you have to do to compile your
modified code in Windows is to explicitly define the
<varname>NONAMELESSUNION</varname> macro. Note that it would be wise
to also explicitly define this macro on in your Unix makefile
(<filename>Makefile.in</filename>) to make sure your code will
compile even if the compiler does support anonymous unions.
</para>
<para>
Things are not as nice when dealing with anonymous structs.
Unfortunately the Windows headers make no provisions for compilers
that do not support anonymous structs. So you will need to be more
subtle when modifying your code if you still want it to compile in
Windows. Here's a way to do it:
</para>
<programlisting>
#ifdef WINELIB
#define ANONS .s
#else
#define ANONS
#endif
. . .
{
SYSTEM_INFO si;
GetSystemInfo(&amp;si);
printf("Processor architecture=%d\n",si ANONS .wProcessorArchitecture);
}
</programlisting>
<para>
You may put the <literal>#define</literal> directive directly in the
source if only few files are impacted. Otherwise it's probably best
to put it in one of your project's widely used headers.
Fortunately usage of an anonymous struct is much rarer than usage of
an anonymous union so these modifications should not be too much work.
</para>
</sect1>
<sect1 id="unicode">
<title id="unicode.title">Unicode</title>
<para>
L"foo" generates 4-byte chars,
use __TEXT (or _TEXT?),
C library
</para>
</sect1>
<sect1 id="C-library">
<title id="C-library.title">C library</title>
<para>
Winelib currently only supports on C library: that of your compiler.
</para>
<para>
three solutions: native, mixed or msvcrt except we only have native right now,
using the native C library -> different behavior: fopen, O_TEXT,
unicode support,
reimplement msvcrt
</para>
</sect1>
<sect1 id="init-problems">
<title id="init-problems.title">Initialization problems</title>
<para>
Initialization problems occur when the application calls the Win32 API
before Winelib has been initialized. How can this happen?
</para>
<para>
Winelib is initialized by the application's <function>main</function>
before it calls the regular <function>WinMain</function>. But, in C++,
the constructors of static class variables are called before the
<function>main</function> (by the module's initializer). So if such
a constructor makes calls to the Win32 API, Winelib will not be
initialized at the time of the call and you may get a crash. This
problem is much more frequent in C++ because of these class
constructors but could also, at least in theory, happen in C if you
were to specify an initializer making calls to Winelib. But of
course, now that you are aware of this problem you won't do it :-).
</para>
<para>
Further compounding the problem is the fact that Linux's (GNU's?)
current dynamic library loader does not call the module
initializers in their dependency order. So even if Winelib were to
have its own initializer there would be no garantee that it would be
called before the initializer of the library containing this static
variable. Finally even if the variable is in a library that your
application links with, that library's initializer may be called
before Winelib has been initialized. One such library is the MFC.
</para>
<para>
The current workaround is to move all the application's code in a
library and to use a small Winelib application to dynamically load
this library. Tus the initialization sequence becomes:
</para>
<itemizedlist>
<listitem>
<para>
the wrapper application starts.
</para>
</listitem>
<listitem>
<para>
its empty initializer is run.
</para>
</listitem>
<listitem>
<para>
its <function>main</function> is run. Its first task is to
initialize Winelib.
</para>
</listitem>
<listitem>
<para>
it then loads the application's main library, plus all its
dependent libraries.
</para>
</listitem>
<listitem>
<para>
which triggers the execution of all these libraries initializers
in some unknown order. But all is fine because Winelib has
already been initialized anyway.
</para>
</listitem>
<listitem>
<para>
finally the main function calls the <function>WinMain</function>
of the application's library.
</para>
</listitem>
</itemizedlist>
<para>
This may sound complex by Winemaker makes it simple. Just specify
<option>--wrap</option> or <option>--mfc</option> on the command line
and it will adapt its makefiles to build the wrapper and the
application library.
</para>
</sect1>
<sect1 id="com-support">
<title id="com-support.title">VC's native COM support</title>
<para>
don't use it,
guide on how to replace it with normal C++ code (yes, how???):
extracting a .h and .lib from a COM dll
Can '-fno-rtti' be of some use or even required?
</para>
</sect1>
<sect1 id="SEH">
<title id="SEH.title">SEH</title>
<para>
how to modify the syntax so that it works both with gcc's macros and Wine's macros,
is it even possible?
</para>
</sect1>
<sect1 id="others">
<title id="others.title">Others</title>
<para>
-fpermissive and -fno-for-scope,
maybe other options
</para>
</sect1>
</chapter>
<chapter id="winelib-toolkit">
<title id="winelib-toolkit.title">The Winelib development toolkit</title>
<sect1 id="winemaker">
<title id="winemaker.title">Winemaker</title>
<sect2 id="vc-projects">
<title id="vc-projects.title">Support for Visual C++ projects</title>
<para>
Unfortunately Winemaker does not support the Visual C++ project
files, ...yet. Supporting Visual C++ project files (the
<filename>.dsp</filename> and some <filename>.mak</filename> files
for older versions of Visual C++) is definitely on
the list of important Winemaker improvements as it will allow it to
properly detect the defines to be used, any custom include path, the
list of libraries to link with, and exactly which source files to use
to build a specific target. All things that the current version of
Winemaker has to guess or that you have to tell it as will become
clear in the next section.
</para>
<para>
When the time comes Winemaker, and its associated build system, will
need some extensions to support:
</para>
<itemizedlist>
<listitem>
<para>
per file defines and include paths. Visual C++ projects allow
the user to specify compiler options for each individual file
being compiled. But this is probably not very frequent so it
might not be that important.
</para>
</listitem>
<listitem>
<para>
multiple configurations. Visual C++ projects usually have at
least a 'Debug' and a 'Release' configuration which are compiled
with different compiler options. How exactly we deal with these
configurations remains to be determined.
</para>
</listitem>
</itemizedlist>
</sect2>
<sect2 id="source-analysis">
<title id="source-analysis.title">Winemaker's source analysis</title>
<para>
Winemaker can do its work even without a Windows makefile or a
Visual Studio project to start from (it would not know what to do
with a windows makefile anyway). This involves doing many educated
guesses which may be wrong. But by and large it works. The purpose
of this section is to describe in more details how winemaker
proceeds so that you can better understand why it gets things
wrong and how to fix it/avoid it.
</para>
<para>
At the core winemaker does a recursive traversal of
your source tree looking for targets (things to build) and source
files. Let's start with the targets.
</para>
<para>
First are executables and dlls. Each time it finds one of these in
a directory, winemaker puts it in the list of things to build and
will later generate a <filename>Makefile.in</filename> file in this
directory. Note that Winemaker also knows about the commonly used
<filename>Release</filename> and <filename>Debug</filename>
directories, so it will attribute the executables and libraries
found in these to their parent directory. When it finds an
executable or a dll winemaker is happy because these give it more
information than the other cases described below.
</para>
<para>
If it does not find any executable or dll winemaker will look for
files with a <filename>.mak</filename> extension. If they are not
disguised Visual C++ projects (and currently even if they are),
winemaker will assume that a target by that name should be built
in this directory. But it will not know whether this target is an
executable or a library. So it will assume it is of the default
type, i.e. a graphical application, which you can override by using
the <option>--cuiexe</option> and <option>--dll</option> options.
</para>
<para>
Finally winemaker will check to see if there is a file called
<filename>makefile</filename>. If there is, then it will assume
that there is exactly one target to build for this directory. But
it will not know the name or type of this target. For the type it
will do as in the above case. And for the name it will use the
directory's name. Actually, if the directory starts with
<filename>src</filename> winemaker will try to make use of the name
of the parent directory instead.
</para>
<para>
Once the target list for a directory has been established,
winemaker will check whether it contains a mix of executables and
libraries. If it is so, then winemaker will make it so that each
executable is linked with all the libraries of that directory.
</para>
<para>
If the previous two steps don't produce the expected results (or
you think they will not) then you should put winemaker in
interactive mode (see <xref linkend="interactive"
endterm="interactive.title">). This will allow you to specify the
target list (and more) for each directory.
</para>
<para>
In each directory winemaker also looks for source files: C, C++
or resource files. If it also found targets to build in this
directory it will then try to assign each source file to one of
these targets based on their names. Source files that do not seem
to match any specific target are put in a global list for this
directory, see the <literal>EXTRA_xxx</literal> variables in the
<filename>Makefile.in</filename>, and linked with each of the
targets. The assumption here is that these source files contain
common code which is shared by all the targets.
If no targets were found in the directory where these files are
located, then they are assigned to the parent's directory. So if a
target is found in the parent directory it will also 'inherit' the
source files found in its subdirectories.
</para>
<para>
Finally winemaker also looks for more exotic files like
<filename>.h</filename> headers, <filename>.inl</filename> files
containing inline functions and a few others. These are not put in
the regular source file lists since they are not compiled directly.
But winemaker will still remember them so that they are processed
when the time comes to fix the source files.
</para>
<para>
Fixing the source files is done as soon as winemaker has finished
its recursive directory traversal. The two main tasks in this step
are fixing the CRLF issues and verifying the case of the include
statements.
</para>
<para>
Winemaker makes a backup of each source file (in such a way that
symbolic links are preserved), then reads it fixing the CRLF
issues and the other issues as it goes. Once it has finished
working on a file it checks whether it has done any non
CRLF-related modification and deletes the backup file if it did
not (or if you used <option>--nobackup</option>).
</para>
<para>
Checking the case of the include statements (of any form,
including files referenced by resource files), is done in the
context of that source file's project. This way winemaker can use
the proper include path when looking for the file that is included.
If winemaker fails to find a file in any of the directories of the
include path, it will rename it to lowercase on the basis that it
is most likely a system header and that all system headers names
are lowercase (this can be overriden by using
<option>--nolower-include</option>).
</para>
<para>
Finally winemaker generates the <filename>Makefile.in</filename>
files and other support files (wrapper files, spec files,
<filename>configure.in</filename>,
<filename>Make.rules.in</filename>). From the above description
you can guess at the items that winemaker may get wrong in
this phase: macro definitions, include path, library path,
list of libraries to import. You can deal with these issues by
using winemaker's <option>-D</option>, <option>-I</option>,
<option>-L</option> and <option>-i</option> options if they are
homogeneous enough between all your targets. Otherwise you may
want to use winemaker's <link linkend="interactive">interactive
mode</link> so that you can specify different settings for each
project / target.
</para>
<para>
For instance, one of the problems you are likely to encounter is
that of the <varname>STRICT</varname> macro. Some programs will
not compile if <varname>STRICT</varname> is not turned on, and
others will not compile if it is. Fortunately all the files in a
given source tree use the same setting so that all you have to do
is add <literal>-DSTRICT</literal> on winemaker's command line
or in the <filename>Makefile.in</filename> file(s).
</para>
<para>
Finally the most likely reasons for missing or duplicate symbols
are:
</para>
<itemizedlist>
<listitem>
<para>
The target is not being linked with the right set of libraries.
You can avoid this by using winemaker's <option>-L</option> and
<option>-i</option> options or adding these libraries to the
<filename>Makefile.in</filename> file.
</para>
</listitem>
<listitem>
<para>
Maybe you have multiple targets in a single directory and
winemaker guessed wrong when trying to match the source files
with the targets. The only way to fix this kind of problem is
to edit the <filename>Makefile.in</filename> file manually.
</para>
</listitem>
<listitem>
<para>
Winemaker assumes you have organized your source files
hierarchically. If a target uses source files that are in a
sibling directory, e.g. if you link with
<filename>../hello/world.o</filename> then you will get missing
symbols. Again the only solution is to manually edit the
<filename>Makefile.in</filename> file.
</para>
</listitem>
</itemizedlist>
</sect2>
<sect2 id="interactive">
<title id="interactive.title">The interactive mode</title>
<para>
what is it,
when to use it,
how to use it
</para>
</sect2>
<sect2 id="Makefile.in">
<title id="Makefile.in.title">The Makefile.in files</title>
<para>
The <filename>Makefile.in</filename> is your makefile. More
precisely it is the template from which the actual makefile will
be generated by the <filename>configure</filename> script. It also
relies on the <filename>Make.rules</filename> file for most of
the actual logic. This way it only contains a relatively simple
description of what needs to be built, not the complex logic of
how things are actually built.
</para>
<para>
So this is the file to modify if you want to customize things.
Here's a detailed description of its content:
</para>
<programlisting>
### Generic autoconf variables
TOPSRCDIR = @top_srcdir@
TOPOBJDIR = .
SRCDIR = @srcdir@
VPATH = @srcdir@
</programlisting>
<para>
The above is part of the standard autoconf boiler-plate. These
variables make it possible to have per-architecture directories for
compiled files and other similar goodies (But note that this kind
of functionality has not been tested with winemaker generated
<filename>Makefile.in</filename> files yet).
</para>
<programlisting>
SUBDIRS =
DLLS =
EXES = hello
</programlisting>
<para>
This is where the targets for this directory are listed. The names
are pretty self-explanatory. <varname>SUBDIRS</varname> is usually
only present in the top-level makefile. For libraries you should
put the full Unix name, e.g. <literal>libfoo.so</literal>.
</para>
<programlisting>
### Global settings
DEFINES = -DSTRICT
INCLUDE_PATH =
LIBRARY_PATH =
LIBRARIES =
</programlisting>
<para>
This section contains the global compilation settings: they apply
to all the targets in this makefile. The <varname>LIBRARIES</varname>
variable allows you to specify additional Unix libraries to link with.
Note that you would normally not specify Winelib libraries there. To
link with a Winelib library, one uses the 'import' statement of the
<link linkend="spec-file">spec files</link>. The exception is when you
have not explicitly exported the functions of a Winelib library. One
library you are likely to find here is <literal>mfc</literal> (note,
the '-l' is omitted).
</para>
<para>
The other variable
names should be self-explanatory. You can also use three additional
variables that are usually not present in the file:
<varname>CEXTRA</varname>, <varname>CXXEXTRA</varname> and
<varname>WRCEXTRA</varname> which allow you to specify additional
flags for, respectively, the C compiler, the C++ compiler and the
resource compiler. Finally note that all these variable contain
the option's name except <varname>IMPORTS</varname>. So you should
put <literal>-DSTRICT</literal> in <varname>DEFINES</varname> but
<literal>winmm</literal> in <varname>IMPORTS</varname>.
</para>
<para>
Then come one section per target, each describing the various
components that target is made of.
</para>
<programlisting>
### hello sources and settings
hello_C_SRCS = hello.c
hello_CXX_SRCS =
hello_RC_SRCS =
hello_SPEC_SRCS = hello.spec
</programlisting>
<para>
Each section will start with a comment indicating the name of the
target. Then come a series of variables prefixed with the name of
that target. Note that the name of the prefix may be slightly
different from that of the target because of restrictions on the
variable names.
</para>
<para>
The above variables list the sources that are used togenerate the
target. Note that there should only be one resource file in
<varname>RC_SRCS</varname>, and that <varname>SPEC_SRCS</varname>
will always contain a single spec file.
</para>
<programlisting>
hello_LIBRARY_PATH =
hello_LIBRARIES =
hello_DEPENDS =
</programlisting>
<para>
The above variables specify how to link the target. Note that they
add to the global settings we saw at the beginning of this file.
</para>
<para>
<varname>DEPENDS</varname>, when present, specifies a list of other
targets that this target depends on. Winemaker will automatically
fill this field, and the <varname>LIBRARIES</varname> field, when an
executable and a library are built in the same directory.
</para>
<para>
The reason why winemaker also links with libraries in the Unix sense
in the case above is because functions will not be properly exported.
Once you have exported all the functions in the library's spec file
you should remove them from the <varname>LIBRARIES</varname> field.
</para>
<programlisting>
hello_OBJS = $(hello_C_SRCS:.c=.o) \
$(hello_CXX_SRCS:.cpp=.o) \
$(EXTRA_OBJS)
</programlisting>
<para>
The above just builds a list of all the object files that
correspond to this target. This list is later used for the link
command.
</para>
<programlisting>
### Global source lists
C_SRCS = $(hello_C_SRCS)
CXX_SRCS = $(hello_CXX_SRCS)
RC_SRCS = $(hello_RC_SRCS)
SPEC_SRCS = $(hello_SPEC_SRCS)
</programlisting>
<para>
This section builds 'summary' lists of source files. These lists are
used by the <filename>Make.rules</filename> file.
</para>
<programlisting>
### Generic autoconf targets
all: $(DLLS) $(EXES:%=%.so)
@MAKE_RULES@
install::
for i in $(EXES); do $(INSTALL_PROGRAM) $$i $(bindir); done
for i in $(EXES:%=%.so) $(DLLS); do $(INSTALL_LIBRARY) $$i $(libdir); done
uninstall::
for i in $(EXES); do $(RM) $(bindir)/$$i;done
for i in $(EXES:%=%.so) $(DLLS); do $(RM) $(libdir)/$$i;done
</programlisting>
<para>
The above first defines the default target for this makefile. Here
it consists in trying to build all the targets. Then it includes
the <filename>Make.rules</filename> file which contains the build
logic, and provides a few more standard targets to install /
uninstall the targets.
</para>
<programlisting>
### Target specific build rules
$(hello_SPEC_SRCS:.spec=.tmp.o): $(hello_OBJS)
$(LDCOMBINE) $(hello_OBJS) -o $@
-$(STRIP) $(STRIPFLAGS) $@
$(hello_SPEC_SRCS:.spec=.spec.c): $(hello_SPEC_SRCS:.spec) $(hello_SPEC_SRCS:.spec=.tmp.o) $(hello_RC_SRCS:.rc=.res)
$(WINEBUILD) -fPIC $(hello_LIBRARY_PATH) $(WINE_LIBRARY_PATH) -sym $(hello_SPEC_SRCS:.spec=.tmp.o) -o $@ -spec $(hello_SPEC_SRCS)
hello.so: $(hello_SPEC_SRCS:.spec=.spec.o) $(hello_OBJS) $(hello_DEP
ENDS)
$(LDSHARED) $(LDDLLFLAGS) -o $@ $(hello_OBJS) $(hello_SPEC_SRCS:.spec=.spec.o) $(hello_LIBRARY_PATH) $(hello_LIBRARIES:%=-l%) $(DLL_LINK) $(LIBS)
test -e hello || $(LN_S) $(WINE) hello
</programlisting>
<para>
Then come additional directives to link the executables and
libraries. These are pretty much standard and you should not need
to modify them.
</para>
</sect2>
<sect2 id="Make.rules.in">
<title id="Make.rules.in.title">The Make.rules.in file</title>
<para>
What's in the Make.rules.in...
</para>
</sect2>
<sect2 id="configure.in">
<title id="configure.in.title">The configure.in file</title>
<para>
What's in the configure.in...
</para>
</sect2>
</sect1>
<sect1 id="wrc">
<title id="wrc.title">Compiling resource files: WRC</title>
<para>
To compile resources you should use the Wine Resource Compiler,
wrc for short, which produces a binary <filename>.res</filename>
file. This resource file is then used by winebuild when compiling
the spec file (see <xref linkend="spec-file"
endterm="spec-file.title">).
</para>
<para>
Again the makefiles generated by winemaker take care of this for you.
But if you were to write your own makefile you would put something
like the following:
</para>
<programlisting>
WRC=$(WINE_DIR)/tools/wrc/wrc
WINELIB_FLAGS = -I$(WINE_DIR)/include -DWINELIB -D_REENTRANT
WRCFLAGS = -r -L
.SUFFIXES: .rc .res
.rc.res:
$(WRC) $(WRCFLAGS) $(WINELIB_FLAGS) -o $@ $<
</programlisting>
<para>
There are two issues you are likely to encounter with resource files.
</para>
<para>
The first problem is with the C library headers. WRC does not know
where these headers are located. So if an RC file, of a file it
includes, references such a header you will get a 'file not found'
error from wrc. Here are a few ways to deal with this:
</para>
<itemizedlist>
<listitem>
<para>
The solution traditionally used by the Winelib headers is to
enclose the offending include statement in an
<literal>#ifndef RC_INVOKED</literal> statement where
<varname>RC_INVOKED</varname> is a macro name which is
automatically defined by wrc.
</para>
</listitem>
<listitem>
<para>
Alternately you can add one or more <option>-I</option> directive
to your wrc command so that it finds you system files. For
instance you may add <literal>-I/usr/include
-I/usr/lib/gcc-lib/i386-linux/2.95.2/include</literal> to cater
to both C and C++ headers. But this supposes that you know where
these header files reside which decreases the portability of your
makefiles to other platforms (unless you automatically detect all
the necessary directories in the autoconf script).
</para>
<para>
Or you could use the C/C++ compiler to perform the preprocessing.
To do so, simply modify your makefile as follows:
</para>
<programlisting>
.rc.res:
$(CC) $(CC_OPTS) -DRC_INVOKED -E -x c $< | $(WRC) -N $(WRCFLAGS) $(WINELIB_FLAGS) -o $@
</programlisting>
<!-- FIXME: does this still cause problems for the line numbers? -->
</listitem>
</itemizedlist>
<para>
The second problem is that the headers may contain constructs that
WRC fails to understand. A typical example is a function which return
a 'const' type. WRC expects a function to be two identifiers followed
by an opening parenthesis. With the const this is three identifiers
followed by a parenthesis and thus WRC is confused (note: WRC should
in fact ignore all this like the windows resource compiler does).
The current work-around is to enclose offending statement(s) in an
<literal>#ifndef RC_INVOKED</literal>.
</para>
</sect1>
<sect1 id="wmc">
<title id="wmc.title">Compiling message files: WMC</title>
<para>
how does one use it???
</para>
</sect1>
<sect1 id="spec-file">
<title id="spec-file.title">The Spec file</title>
<sect2 id="spec-intro">
<title id="spec-intro.title">Introduction</title>
<para>
In Windows the program's life starts either when its
<function>main</function> is called, for console applications, or
when its <function>WinMain</function> is called, for windows
applications in the 'windows' subsystem. On Unix it is always
<function>main</function> that is called. Furthermore in Winelib it
has some special tasks to accomplish, such as initializing Winelib,
that a normal <function>main</function> does not have to do.
</para>
<para>
Furthermore windows applications and libraries contain some
information which are necessary to make APIs such as
<function>GetProcAddress</function> work. So it is necessary to
duplicate these data structures in the Unix world to make these
same APIs work with Winelib applications and libraries.
</para>
<para>
The spec file is there to solve the semantic gap described above.
It provides the <function>main</function> function that initializes
Winelib and calls the module's <function>WinMain</function> /
<function>DllMain</function>, and it contains information about
each API exported from a Dll so that the appropriate tables can be
generated.
</para>
<para>
A typical spec file will look something like this:
</para>
<screen>
name hello
type win32
mode guiexe
init WinMain
rsrc resource.res
import winmm.dll
</screen>
<para>
And here are the entries you will probably want to change:
</para>
<variablelist>
<varlistentry>
<term>name</term>
<listitem>
<para>
This is the name of the Win32 module. Usually this is the
same as that of the application or library (but without the
'lib' and the '.so').
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>mode</term>
<term>init</term>
<listitem>
<para>
<literal>mode</literal> defines whether what you are
building is a library, <literal>dll</literal>, a console
application, <literal>cuiexe</literal> or a regular
graphical application <literal>guiexe</literal>. Then
<literal>init</literal> defines what is the entry point of
that module. For a library this is customarily set to
<literal>DllMain</literal>, for a console application this
is <literal>main</literal> and for a graphical application
this is <literal>WinMain</literal>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>import</term>
<listitem>
<para>
Add an 'import' statement for each library that this
executable depends on. If you don't, these libraries will
not get initialized in which case they may very well not
work (e.g. winmm).
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>rsrc</term>
<listitem>
<para>
This item specifies the name of the compiled resource file
to link with your module. If your resource file is called
<filename>hello.rc</filename> then the wrc compilation step
(see <xref linkend="wrc" endterm="wrc.title">) will generate
a file called <filename>hello.res</filename>. This is the
name you must provide here. Note that because of this you
cannot compile the spec file before you have compiled the
resource file. So you should put a rule like the following
in your makefile:
</para>
<programlisting>
hello.spec.c: hello.res
</programlisting>
<para>
If your project does not have a resource file then you must
omit this entry altogether.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>@</term>
<listitem>
<para>
This entry is not shown above because it is not always
necessary. In fact it is only necessary to export functions
when you plan to dynamically load the library with
<function>LoadLibrary</function> and then do a
<function>GetProcAddress</function> on these functions.
This is not necessary if you just plan on linking with the
library and calling the functions normally. For more details
about this see: <xref linkend="spec-reference"
endterm="spec-reference.title">.
</para>
</listitem>
</varlistentry>
</variablelist>
</sect2>
<sect2 id="spec-compiling">
<title id="spec-compiling.title">Compiling it</title>
<para>
Compiling a spec file is a two step process. It is first
converted into a C file by winebuild, and then compiled into an
object file using your regular C compiler. This is all taken
care of by the winemaker generated makefiles of course. But
here's what it would like if you had to do it by hand:
</para>
<screen>
WINEBUILD=$(WINE_DIR)/tools/winebuild
.SUFFIXES: .spec .spec.c .spec.o
.spec.spec.c:
$(WINEBUILD) -fPIC -o $@ -spec $<
.spec.c.spec.o:
$(CC) -c -o $*.spec.o $<
</screen>
<para>
Nothing really complex there. Just don't forget the
<literal>.SUFFIXES</literal> statement, and beware of the tab if
you copy this straight to your Makefile.
</para>
</sect2>
<sect2 id="spec-reference">
<title id="spec-reference.title">More details</title>
<para>
(Extracted from tools/winebuild/README)
<!-- FIXME: this seems to be rather outdated and sometimes even incorrect, check with the source! -->
</para>
<para>
Here is a more detailed description of the spec file's format.
</para>
<programlisting>
# comment text
</programlisting>
<para>
Anything after a '#' will be ignored as comments.
</para>
<programlisting>
name NAME
type win16|win32 &lt;--- the |'s mean it's one or the other
</programlisting>
<para>
These two fields are mandatory. <literal>name</literal>
defines the name of your module and <literal>type</literal>
whether it is a Win16 or Win32 module. Note that for Winelib
you should only be using Win32 modules.
</para>
<programlisting>
file WINFILENAME
</programlisting>
<para>
This field is optional. It gives the name of the Windows file that
is replaced by the builtin. <literal>&lt;name&gt;.DLL</literal>
is assumed if none is given. This is important for kernel, which
lives in the Windows file <filename>KRNL386.EXE</filename>.
</para>
<programlisting>
heap SIZE
</programlisting>
<para>
This field is optional and specific to Win16 modules. It defines
the size of the module local heap. The default is no local heap.
</para>
<programlisting>
mode dll|cuiexe|guiexe
</programlisting>
<para>
This field is optional. It specifies specifies whether it is the
spec file for a dll or the main exe. This is only valid for Win32
spec files.
</para>
<programlisting>
init FUNCTION
</programlisting>
<para>
This field is optional and specific to Win32 modules. It
specifies a function which will be called when the dll is loaded
or the executable started.
</para>
<programlisting>
import DLL
</programlisting>
<para>
This field can be present zero or more times.
Each instance names a dll that this module depends on (only for
Win32 modules at the present).
</para>
<programlisting>
rsrc RES_FILE
</programlisting>
<para>
This field is optional. If present it specifies the name of the
.res file containing the compiled resources. See <xref
linkend="wrc" endterm="wrc.title"> for details on compiling a
resource file.
</para>
<programlisting>
ORDINAL VARTYPE EXPORTNAME (DATA [DATA [DATA [...]]])
2 byte Variable(-1 0xff 0 0)
</programlisting>
<para>
This field can be present zero or more times.
Each instance defines data storage at the ordinal specified. You
may store items as bytes, 16-bit words, or 32-bit words.
<literal>ORDINAL</literal> is replaced by the ordinal number
corresponding to the variable. <literal>VARTYPE</literal> should
be <literal>byte</literal>, <literal>word</literal> or
<literal>long</literal> for 8, 16, or 32 bits respectively.
<literal>EXPORTNAME</literal> will be the name available for
dynamic linking. <literal>DATA</literal> can be a decimal number
or a hex number preceeded by "0x". The example defines the
variable <literal>Variable</literal> at ordinal 2 and containing
4 bytes.
</para>
<programlisting>
ORDINAL equate EXPORTNAME DATA
</programlisting>
<para>
This field can be present zero or more times.
Each instance defines an ordinal as an absolute value.
<literal>ORDINAL</literal> is replaced by the ordinal number
corresponding to the variable. <literal>EXPORTNAME</literal> will
be the name available for dynamic linking.
<literal>DATA</literal> can be a decimal number or a hex number
preceeded by "0x".
</para>
<programlisting>
ORDINAL FUNCTYPE EXPORTNAME([ARGTYPE [ARGTYPE [...]]]) HANDLERNAME
100 pascal CreateWindow(ptr ptr long s_word s_word s_word s_word
word word word ptr)
WIN_CreateWindow
101 pascal GetFocus() WIN_GetFocus()
</programlisting>
<para>
This field can be present zero or more times.
Each instance defines a function entry point. The prototype
defined by <literal>EXPORTNAME ([ARGTYPE [ARGTYPE [...]]])</literal>
specifies the name available for dynamic linking and the format
of the arguments. <literal>"ORDINAL</literal>" is replaced
by the ordinal number corresponding to the function, or
<literal>@</literal> for automatic ordinal allocation (Win32 only).
</para>
<para>
<literal>FUNCTYPE</literal> should be one of:
</para>
<variablelist>
<varlistentry>
<term>pascal16</term>
<listitem><para>for a Win16 function returning a 16-bit value</para></listitem>
</varlistentry>
<varlistentry>
<term>pascal</term>
<listitem><para>for a Win16 function returning a 32-bit value</para></listitem>
</varlistentry>
<varlistentry>
<term>register</term>
<listitem><para>for a function using CPU register to pass arguments</para></listitem>
</varlistentry>
<varlistentry>
<term>interrupt</term>
<listitem><para>for a Win16 interrupt handler routine</para></listitem>
</varlistentry>
<varlistentry>
<term>stdcall</term>
<listitem><para>for a normal Win32 function</para></listitem>
</varlistentry>
<varlistentry>
<term>cdecl</term>
<listitem><para>for a Win32 function using the C calling convention</para></listitem>
</varlistentry>
<varlistentry>
<term>varargs</term>
<listitem><para>for a Win32 function taking a variable number of arguments</para></listitem>
</varlistentry>
</variablelist>
<para>
<literal>ARGTYPE</literal> should be one of:
</para>
<variablelist>
<varlistentry>
<term>word</term>
<listitem><para>for a 16 bit word</para></listitem>
</varlistentry>
<varlistentry>
<term>long</term>
<listitem><para>a 32 bit value</para></listitem>
</varlistentry>
<varlistentry>
<term>ptr</term>
<listitem><para>for a linear pointer</para></listitem>
</varlistentry>
<varlistentry>
<term>str</term>
<listitem><para>for a linear pointer to a null-terminated string</para></listitem>
</varlistentry>
<varlistentry>
<term>s_word</term>
<listitem><para>for a 16 bit signed word</para></listitem>
</varlistentry>
<varlistentry>
<term>segptr</term>
<listitem><para>for a segmented pointer</para></listitem>
</varlistentry>
<varlistentry>
<term>segstr</term>
<listitem><para>for a segmented pointer to a null-terminated string</para></listitem>
</varlistentry>
</variablelist>
<para>
Only <literal>ptr</literal>, <literal>str</literal> and
<literal>long</literal> are valid for Win32 functions.
<literal>HANDLERNAME</literal> is the name of the actual Wine
function that will process the request in 32-bit mode.
</para>
<para>
The two examples define an entry point for the
<function>CreateWindow</function> and <function>GetFocus</function>
calls respectively. The ordinals used are just examples.
</para>
<para>
To declare a function using a variable number of arguments in
Win16, specify the function as taking no arguments. The arguments
are then available with CURRENT_STACK16->args. In Win32, specify
the function as <literal>varargs</literal> and declare it with a
'...' parameter in the C file. See the wsprintf* functions in
<filename>user.spec</filename> and
<filename>user32.spec</filename> for an example.
</para>
<programlisting>
ORDINAL stub EXPORTNAME
</programlisting>
<para>
This field can be present zero or more times.
Each instance defines a stub function. It makes the ordinal
available for dynamic linking, but will terminate execution with
an error message if the function is ever called.
</para>
<programlisting>
ORDINAL extern EXPORTNAME SYMBOLNAME
</programlisting>
<para>
This field can be present zero or more times.
Each instance defines an entry that simply maps to a Wine symbol
(variable or function); <literal>EXPORTNAME</literal> will point
to the symbol <literal>SYMBOLNAME</literal> that must be defined
in C code. This type only works with Win32.
</para>
<programlisting>
ORDINAL forward EXPORTNAME SYMBOLNAME
</programlisting>
<para>
This field can be present zero or more times.
Each instance defines an entry that is forwarded to another entry
point (kind of a symbolic link). <literal>EXPORTNAME</literal>
will forward to the entry point <literal>SYMBOLNAME</literal>
that must be of the form <literal>DLL.Function</literal>. This
type only works with Win32.
</para>
</sect2>
</sect1>
<sect1 id="linking">
<title id="linking.title">Linking it all together</title>
<!-- FIXME: This is outdated -->
<para>
To link an executable you need to link together: your object files,
the spec file, any Windows libraries that your application depends
on, gdi32 for instance, and any additional library that you use. All
the libraries you link with should be available as '.so' libraries.
If one of them is available only in '.dll' form then consult
<xref linkend="bindlls" endterm="bindlls.title">.
</para>
<para>
It is also when attempting to link your executable that you will
discover whether you have missing symbols or not in your custom
libraries. On Windows when you build a library, the linker will
immediately tell you if a symbol it is supposed to export is
undefined. In Unix, and in Winelib, this is not the case. The symbol
will silently be marked as undefined and it is only when you try to
produce an executable that the linker will verify all the symbols are
accounted for.
</para>
<para>
So before declaring victory when first converting a library to
Winelib, you should first try to link it to an executable (but you
would have done that to test it anyway, right?). At this point you
may discover some undefined symbols that you thought were implemented
by the library. Then, you to the library sources and fix it. But you
may also discover that the missing symbols are defined in, say,
gdi32. This is because you did not link the said library with gdi32.
One way to fix it is to link this executable, and any other that also
uses your library, with gdi32. But it is better to go back to your
library's makefile and explicitly link it with gdi32.
</para>
<para>
As you will quickly notice, this has unfortunately not been
(completely) done for Winelib's own libraries. So if an application
must link with ole32, you will also need to link with advapi32,
rpcrt4 and others even if you don't use them directly. This can be
annoying and hopefully will be fixed soon (feel free to submit a
patch).
</para>
<!-- FIXME: try to give some sort of concrete example -->
</sect1>
</chapter>
<chapter id="mfc">
<title id="mfc.title">Dealing with the MFC</title>
<sect1 id="mfc-introduction">
<title id="mfc-introduction.title">Introduction</title>
<para>
To use the MFC in a Winelib application you will first have to
recompile the MFC with Winelib. In theory it should be possible to
write a wrapper for the Windows MFC as described in
<xref linkend="bindlls" endterm="bindlls.title">. But in practice
it does not seem to be a realistic approach for the MFC:
</para>
<itemizedlist>
<listitem>
<para>
the huge number of APIs makes writing the wrapper a big task in
itself.
</para>
</listitem>
<listitem>
<para>
furthermore the MFC contain a huge number of APIs which are tricky
to deal with when making a wrapper.
</para>
</listitem>
<listitem>
<para>
even once you have written the wrapper you will need to modify
the MFC headers so that the compiler does not choke on them.
</para>
</listitem>
<listitem>
<para>
a big part of the MFC code is actually in your application in
the form of macros. This means even more of the MFC headers have
to actually work to in order for you to be able to compile an
MFC based application.
</para>
</listitem>
</itemizedlist>
<para>
This is why this guide includes a section dedicated to helping you
compile the MFC with Winelib.
</para>
</sect1>
<sect1 id="mfc-legal-issues">
<title id="mfc-legal-issues.title">Legal issues</title>
<para>
(Extracted from the HOWTO-Winelib written by Wilbur Dale
&lt;wilbur.dale@lumin.nl&gt;)
</para>
<para>
The purpose of this section is to make you aware of potential legal
problems. Be sure to read your licenses and to consult your lawyers.
In any case you should not consider the remainder of this section to
be authoritative since it has not been written by a lawyer.
</para>
<para>
Well, let's try to have a look at the situation anyway.
</para>
<para>
During the compilation of your program, you will be combining code
from several sources: your code, Winelib code, Microsoft MFC code,
and possibly code from other vendor sources. As a result, you must
ensure that the licenses of all code sources are obeyed. What you are
allowed and not allowed to do can vary depending on how you compile
your program and if you will be distributing it. For example, if you
are releasing your code under the GPL, you cannot link your code to
MFC code because the GPL requires that you provide ALL sources to your
users. The MFC license forbids you from distributing the MFC source so
you cannot both distribute your program and comply with the GPL
license. On the other hand, if your code is released under the LGPL,
you cannot statically link your program to the MFC and distribute it,
but you can dynamically link your LGPL code and the MFC library and
distribute it.
</para>
<para>
Wine/Winelib is distributed under an X11-like license. It places few
restrictions on the use and distribution of Wine/Winelib code. I doubt
the Wine license will cause you any problems. On the other hand, MFC
is distributed under a very restrictive license and the restrictions
vary from version to version and between service packs. There are
basically three aspects you must be aware of when using the MFC.
</para>
<para>
First you must legally get MFC source code on your computer. The MFC
source code comes as a part of Visual Studio. The license for
Visual Studio implies it is a single product that can not
be broken up into its components. So the cleanest way to get MFC on
your system is to buy Visual Studio and install it on a dual boot
Linux box.
</para>
<para>
Then you must check that you are allowed to recompile MFC on a
non-Microsoft operating system! This varies with the version of MFC.
The MFC license from Visual Studio 6.0 reads in part:
</para>
<blockquote>
<para>
1.1 General License Grant. Microsoft grants to you as an
individual, a personal, nonexclusive license to make and use
copies of the SOFTWARE PRODUCT for the sole purposes of designing,
developing, and testing your software product(s) that are designed
to operate in conjunction with any Microsoft operating system
product. [Other unrelated stuff deleted.]
</para>
</blockquote>
<para>
So it appears you cannot even compile MFC for Winelib using this
license. Fortunately the Visual Studio 6.0 service pack 3 license
reads (the Visual Studio 5.0 license is similar):
</para>
<blockquote>
<para>
1.1 General License Grant. Microsoft grants to you as an
individual, a personal, nonexclusive license to make and use
copies of the SOFTWARE PRODUCT for the purpose of designing,
developing, and testing your software product(s). [Other unrelated
stuff deleted]
</para>
</blockquote>
<para>
So under this license it appears you can compile MFC for Winelib.
</para>
<para>
Finally you must check whether you have the right to distribute an
MFC library. Check the relevant section of the license on
<quote>redistributables and your redistribution rights</quote>. The
license seems to specify that you only have the right to distribute
binaries of the MFC library if it has no debug information and if
you distribute it with an application that provides significant
added functionality to the MFC library.
<!-- FIXME: quote relevant sections of EULA in above paragraph. -->
</para>
</sect1>
<sect1 id="mfc-compiling">
<title id="mfc-compiling.title">Compiling the MFC</title>
<para>
Things to disable,
why we have to disable them (lack of Wine support),
where things don't compile,
why,
how to solve it,
what to put in the Makefile,
maybe try to point to a place with a ready-made makefile...
</para>
</sect1>
<sect1 id="mfc-using">
<title id="mfc-using.title">Using the MFC</title>
<para>
</para>
<para>
Specific winemaker options,
the configure options,
the initialization problem...
</para>
</sect1>
</chapter>
<chapter id="bindlls">
<title id="bindlls.title">Dealing with binary only dlls</title>
<sect1 id="bindlls-intro">
<title id="binary-dlls-intro.title">Introduction</title>
<para>
describe the problem,
use an example and reuse it in the following sections...
</para>
</sect1>
<sect1 id="bindlls-spec">
<title id="bindlls-spec.title">Writing the spec file</title>
<para>
give an example...
</para>
</sect1>
<sect1 id="bindlls-cxx-apis">
<title id="bindlls-cxx-apis.title">How to deal with C++ APIs</title>
<para>
names are mangled, how to demangle them, how to call them
</para>
</sect1>
<sect1 id="bindlls-wrapper">
<title id="bindlls-wrapper.title">Writing the wrapper</title>
<para>
give an example
</para>
</sect1>
</chapter>
<chapter id="packaging">
<title id="packaging.title">Packaging your Winelib application</title>
<para>
Selecting which libraries to deliver,
how to avoid interference with other Winelib applications,
how to play nice with other Winelib applications
</para>
</chapter>
</book>
<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-parent-document:("wine-doc.sgml" "set" "book" "")
End:
-->