Sweden-Number/documentation/documentation.sgml

1732 lines
71 KiB
Plaintext

<chapter id="documentation">
<title>Documenting Wine</title>
<para>
Written by &name-jon-griffiths; <email>&email-jon-griffiths;</email>
</para>
<para>
This chapter describes how you can help improve Wines documentation.
</para>
<para>
Like most large scale volunteer projects, Wine is strongest in areas that are rewarding
for its volunteers to work in. The majority of contributors send code patches either
fixing bugs, adding new functionalty or otherwise improving the software components of
the distribution. A lesser number contribute in other ways, such as reporting bugs and
regressions, creating tests, providing organisational assistance, or helping to document
Wine.
</para>
<para>
Documentation is important for many reasons, and is often the key to the end user having
a successful experience in installing, setting up and using software. Because Wine is a
complicated, evolving entity, providing quality up to date documentation is vital to
encourage more people to persevere with using and contributing to the project.
The following sections describe in detail how to go about adding to or updating Wines
existing documentation.
</para>
<sect1 id="doc-overview">
<title>An Overview Of Wine Documentation</title>
<para>
The Wine source code tree comes with a large amount of documentation in the
<filename>documentation/</filename> subdirectory. This used to be a collection
of text files culled from various places such as the Wine Weekly News and the wine-devel
mailing list, but was reorganised some time ago into a number of books, each of which is
marked up using SGML. You are reading one of these books (the
<emphasis>Wine Developer's Guide</emphasis>) right now.
</para>
<para>
Since being reorganised, the books have been updated and extended regularly. In their
current state they provide a good framework which over time can be expanded and kept
up to date. This means that most of the time when further documentation is added, it is
a simple matter of updating the content of an already existing file. The books
available at the time of writing are:
<itemizedlist>
<listItem><para>
The <emphasis>Wine User Guide</emphasis>. This book contains information for end users
on installing, configuring and running Wine.
</para></listitem>
<listItem><para>
The <emphasis>Wine Developer's Guide</emphasis>. This book contains information and
guidelines for developers and contributors to the Wine project.
</para></listitem>
<listItem><para>
The <emphasis>Winelib User's Guide</emphasis>. This book contains information for
developers using Winelib to port Win32 applications to Unix.
</para></listitem>
<listItem><para>
The <emphasis>Wine Packagers Guide</emphasis>. This book contains information for
anyone who will be distributing Wine to end users in a prepackaged format.
</para></listitem>
<listItem><para>
The <emphasis>Wine FAQ</emphasis>. This book contains frequently asked questions
about Wine with their answers.
</para></listitem>
</itemizedlist>
</para>
<para>
Another source of documentation is the <emphasis>Wine API Guide</emphasis>. This is
generated information taken from special comments placed in the Wine source code.
When you update or add new API calls to Wine you should consider documenting them so
that developers can determine what the API does and how it should be used.
</para>
<para>
The next sections describe how to create Wine API documentation and how to work with
SGML so you can add to the existing books.
</para>
</sect1>
<sect1 id="api-docs">
<title>Writing Wine API Documentation</title>
<para>
Written by &name-jon-griffiths; <email>&email-jon-griffiths;</email>
</para>
<sect2 id="api-docs-intro">
<title>Introduction to API Documentation</title>
<para>
Wine includes a large amount of documentation on the API functions
it implements. There are serveral reasons to want to document the Win32
API:
<itemizedlist>
<listItem><para>
To allow Wine developers to know what each function should do, should
they need to update or fix it.
</para></listitem>
<listItem><para>
To allow Winelib users to understand the functions that are available
to their applications.
</para></listitem>
<listItem><para>
To provide an alternative source of free documentation on the Win32 API.
</para></listitem>
<listItem><para>
To provide more accurate documentation where the existing documentation
is accendentally or deliberately vague or misleading.
</para></listitem>
</itemizedlist>
</para>
<para>
To this end, a semi formalised way of producing documentation from the Wine
source code has evolved. Since the primary users of API documentation are Wine
developers themselves, documentation is usually inserted into the source code
in the form of comments and notes. Good things to include in the documentation
of a function include:
<itemizedlist>
<listItem><para>
The purpose of the function.
</para></listitem>
<listItem><para>
The parameters of the function and their purpose.
</para></listitem>
<listItem><para>
The return value of the function, in success as well as failure cases.
</para></listitem>
<listItem><para>
Additional notes such as interaction with other parts of the system, differences
between Wines implementation and Win32s, errors in MSDN documentation,
undocumented cases and bugs that Wine corrects or is compatable with.
</para></listitem>
</itemizedlist>
</para>
<para>
Good documentation helps developers be aware of the effects of making changes. It
also allows good tests to be written which cover all of the documented cases.
</para>
<para>
Note that you do not need to be a programmer to update the documentation in Wine.
If you would like to contribute to the project, patches that improve the API
documentation are welcome. The following describes how to format any documentation
that you write so that the Wine documentation generator can extract it and make it
available to other developers and users.
</para>
<para>
In general, if you did not write the function in question, you should be wary of
adding comments to other peoples code. It is quite possible you may misunderstand
or misrepresent what the original author intended! Adding API documentation on
the other hand can be done by anybody, since in most cases there is plenty of
information about what a function is supposed to do (if it isn't obvious)
available in books and articles on the internet.
</para>
<para>
A final warning concerns copyright and must be noted. If you read MSDN or any
publication in order to find out what an API call does, you must be aware that
the text you are reading is copyrighted and in most cases cannot legally be
reproduced without the authors permission. If you copy verbatim any information
from such sources and submit it for inclusion into Wine, you open yourself up
to potential legal liability. You must ensure that anything you submit is
your own work, although it can be based on your understanding gleaned from
reading other peoples work.
</para>
</sect2>
<sect2 id="api-docs-basics">
<title>Basic API Documentation</title>
<para>
The general form of an API comment in Wine is a block comment immediately before a
function is implemented in the source code. General comments within a function body or
at the top of an implementation file are ignored by the API documentation generator.
Such comments are for the benefit of developers only, for example to explain what the
source code is doing or to describe something that may not be obvious to the person
reading the source code.
</para>
<para>
The following text uses the function <emphasis>PathRelativePathToA()</emphasis> from
<filename>SHLWAPI.DLL</filename> as an example. You can find this function in the Wine
source code tree in the file <filename>dlls/shlwapi/path.c</filename>.
</para>
<para>
The first line of the comment gives the name of the function, the DLL that the
function is exported from, and its export ordinal number. This is the simplest
(and most common type of) comment:
</para>
<screen>
/*************************************************************************
* PathRelativePathToA [SHLWAPI.@]
*/
</screen>
<para>
The functions name and the DLL name are obvious. The ordinal number takes one of
two forms: Either <command>@</command> as in the above, or a number if the export
is exported by ordinal. You can see which to use by looking at the DLL's
<filename>.spec</filename> file. If the line on which the function is listed begins
with a number, use it, otherwise use the <command>@</command> symbol, which indicates
that this function is imported only by name.
</para>
<para>
Note also that round or square brackets can be used, and whitespace between the name
and the DLL/ordinal is free form. Thus the following is equally valid:
</para>
<screen>
/*************************************************************************
* PathRelativePathToA (SHLWAPI.@)
*/
</screen>
<para>
This basic comment will not get processed into documentation, since it
contains no information. In order to produce documentation for the function,
We must add some of the information listed above.
</para>
<para>
First we add a description of the function. This can be as long as you like, but
typically contains only a brief description of what the function is meant to do
in general terms. It is free form text:
</para>
<screen>
/*************************************************************************
* PathRelativePathToA [SHLWAPI.@]
*
* Create a relative path from one path to another.
*/
</screen>
<para>
To be truly useful however we must document the parameters to the function.
There are two methods for doing this: In the comment, or in the function
prototype.
</para>
<para>
Parameters documented in the comment should be formatted as follows:
</para>
<screen>
/*************************************************************************
* PathRelativePathToA [SHLWAPI.@]
*
* Create a relative path from one path to another.
*
* PARAMS
* lpszPath [O] Destination for relative path
* lpszFrom [I] Source path
* dwAttrFrom [I] File attribute of source path
* lpszTo [I] Destination path
* dwAttrTo [I] File attributes of destination path
*
*/
</screen>
<para>
The parameters section starts with <command>PARAMS</command> on its own line.
Each parameter is listed in the order they appear in the functions prototype,
first with the parameters name, followed by its input/output status, followed
by a free form text description of the comment.
</para>
<para>
The input/output status tells the programmer whether the value will be modified
by the function (an output parameter), or only read (an input parameter). The
status must be enclosed in square brackets to be recognised, otherwise, or if it
is absent, anything following the parameter name is treated as the parameter
description. This field is case insensitive and can be any of the following:
<command>[I]</command>, <command>[In]</command>, <command>[O]</command>,
<command>[Out]</command>, <command>[I/O]</command>, <command>[In/Out]</command>.
</para>
<para>
Parameters documented in the prototype should be formatted as follows:
</para>
<screen>
/*************************************************************************
* PathRelativePathToA [SHLWAPI.@]
*
* Create a relative path from one path to another.
*
*/
BOOL WINAPI PathRelativePathToA(
LPSTR lpszPath, /* [O] Destination for relative path */
LPCSTR lpszFrom, /* [I] Source path */
DWORD dwAttrFrom, /* [I] File attribute of source path */
LPCSTR lpszTo, /* [I] Destination path */
DWORD dwAttrTo) /* [I] File attributes of destination path */
</screen>
<para>
The choice of which style to use is up to you, although for readability it
is suggested you stick with the same style within a single source file.
</para>
<para>
Following the description and parameters come a number of optional sections, all
in the same format. A section is defined as the section name, which is an all upper
case section name on its own line, followed by free form text. You can create any
sections you like, however for consistency it is recommended you use the following
section names:
<orderedlist>
<listItem><para>
<command>NOTES</command>. Anything that needs to be noted about the function
such as special cases and the effects of input arguments.
</para></listitem>
<listItem><para>
<command>BUGS</command>. Any bugs in the function that exist 'by design', i.e.
those that will not be fixed or exist for compatability with Windows.
</para></listitem>
<listItem><para>
<command>TODO</command>. Any unhandled cases or missing functionality in the Wine
implementation of the function.
</para></listitem>
<listItem><para>
<command>FIXME</command>. Things that should be updated or addressed in the implementation
of the function at some future date (perhaps dependent on other parts of Wine). Note
that if this information is only relevant to Wine developers then it should probably
be placed in the relavent code section instead.
</para></listitem>
</orderedlist>
</para>
<para>
Following or before the optional sections comes the <command>RETURNS</command> section
which describes the return value of the function. This is free form text but should include
what is returned on success as well as possible error return codes. Note that this
section must be present for documentation to be generated for your comment.
</para>
<para>
Our final documentation looks like the following:
</para>
<screen>
/*************************************************************************
* PathRelativePathToA [SHLWAPI.@]
*
* Create a relative path from one path to another.
*
* PARAMS
* lpszPath [O] Destination for relative path
* lpszFrom [I] Source path
* dwAttrFrom [I] File attribute of source path
* lpszTo [I] Destination path
* dwAttrTo [I] File attributes of destination path
*
* RETURNS
* TRUE If a relative path can be formed. lpszPath contains the new path
* FALSE If the paths are not relative or any parameters are invalid
*
* NOTES
* lpszTo should be at least MAX_PATH in length.
* Calling this function with relative paths for lpszFrom or lpszTo may
* give erroneous results.
*
* The Win32 version of this function contains a bug where the lpszTo string
* may be referenced 1 byte beyond the end of the string. As a result random
* garbage may be written to the output path, depending on what lies beyond
* the last byte of the string. This bug occurs because of the behaviour of
* PathCommonPrefix() (see notes for that function), and no workaround seems
* possible with Win32.
* This bug has been fixed here, so for example the relative path from "\\"
* to "\\" is correctly determined as "." in this implementation.
*/
</screen>
</sect2>
<sect2 id="api-docs-advanced">
<title>Advanced API Documentation</title>
<para>
There is no markup language for formatting API comments, since they should
be easily readable by any developer working on the source file. A number of
constructs are treated specially however, and are noted here. You can use these
constructs to enhance the usefulness of the generated documentation by making it
easier to read and referencing related documents.
</para>
<para>
Any valid c identifier that ends with <command>()</command> is taken to
be an API function and is formatted accordingly. When generating documentation,
this text will become a link to that API call, if the output type supports
hyperlinks or their equivalent.
</para>
<para>
Similarly, any interface name starting with a capital I and followed by the
words "reference" or "object" become a link to that objects documentation.
</para>
<para>
Where an Ascii and Unicode version of a function are available, it is
recommended that you document only the Ascii version and have the Unicode
version refer to the Ascii one, as follows:
</para>
<screen>
/*************************************************************************
* PathRelativePathToW [SHLWAPI.@]
*
* See PathRelativePathToA.
*/
</screen>
<para>
Alternately you may use the following form:
</para>
<screen>
/*************************************************************************
* PathRelativePathToW [SHLWAPI.@]
*
* Unicode version of PathRelativePathToA.
*/
</screen>
<para>
You may also use this construct in any other section, such as <command>NOTES</command>.
</para>
<para>
Any numbers and text in quotes (<command>""</command>) are highlighted.
</para>
<para>
Words in all uppercase are assumed to be API constants and are highlighted. If
you want to emphasise something in the documentation, put it in a section by itself
rather than making it upper case.
</para>
<para>
Blank lines in a section cause a new paragraph to be started. Blank lines
at the start and end of sections are ignored.
</para>
<para>
Any comment line starting with (<command>"*|"</command>) is treated as raw text and
is not pre-processed before being output. This should be used for code listings,
tables and any text that should remain unformatted.
</para>
<para>
Any line starting with a single word followed by a colon (<command>:</command>)
is assumed to be case listing and is emphasised and put in its own paragrah. This
is most often used for return values, as in the example section below.
</para>
<screen>
* RETURNS
* Success: TRUE. Something happens that is documented here.
* Failure: FALSE. The reasons why this call can fail are listed here.
</screen>
<para>
Any line starting with a (<command>-</command>) is put into a paragraph by itself.
this allows lists to avoid being run together.
</para>
<para>
If you are in doubt as to how your comment will look, try generating the API
documentation and checking the output.
</para>
</sect2>
<sect2 id="api-docs-extra">
<title>Extra API Documentation</title>
<para>
Simply documenting the API calls available provides a great deal of information to
developers working with the Win32 API. However additional documentation is needed
before the API Guide can be considered truly useful or comprehensive. For example,
COM objects that are available for developers use should be documented, along with
the interface(s) that those objects export. Also, it would be helpful to document
each dll, to provide some structure to the documentation.
</para>
<para>
To facilitate providing extra documentation, you can create comments that provide
extra documentation on functions, or on keywords such as the name of a COM interface
or a type definition.
</para>
<para>
These items are generated using the same formatting rules as described earlier. The
only difference is the first line of the comment, which indicates to the generator
that the documentation is supplimental and does not describe an export from the dll
being processed.
</para>
<para>
Lets assume you have implemented a COM interface that you want to document; we'll
use the name <command>IExample</command> as an example here. Your comment would
look like the following (assuming you are exporting this object from
<filename>EXAMPLE.DLL</filename>):
<screen>
/*************************************************************************
* IExample {EXAMPLE}
*
* The IExample object provides lots of interesting functionality.
* ...
*/
</screen>
</para>
<para>
Format this documentation exactly as you would a standard export. The only
difference is the use of curly brackets to mark this documentation as supplimental.
The generator will output this documentation using the name given before the
DLL name, and will link to it from the main DLL page. In addition, if you have
referred to the comment name in other documentation using "IExample interface",
"IExample object", or "IExample()", those references will point to this documentation.
</para>
<para>
If you document you COM interfaces this way then all following extra comments that
follow in the same source file that begin with the same document title will be added
as references to this comment before it is output. For an example of this see
<filename>dlls/oleaut32/safearray.c</filename>. This uses an extra comment to document
The SafeArray functions and link them together under one heading.
</para>
<para>
As a special case, if you use the DLL name as the comment name, the comment will
be treated as documentation on the DLL itself. When the documentation for the DLL
is processed, the contents of the comment will be placed before the generated
statistics, exports and other information that makes up a DLL's documentation page.
</para>
</sect2>
<sect2 id="api-docs-generating">
<title>Generating API Documentation</title>
<para>
Having edited or added new API documentation to a source code file, you
should generate the documentation to ensure that the result is what you
expected. Wine includes a tool (slightly misleadingly) called
<command>c2man.pl</command> in the <filename>tools/</filename> directory
which is used to generate the documentation from the source code.
</para>
<para>
You can run <command>c2man.pl</command> manually for testing purposes; it is
a fairly simple perl script which parses <filename>.c</filename> files
to create output in several formats. If you wish to try this you may want
to run it with no arguments, which will cause it to print usage information.
</para>
<para>
An easier way is to use Wines build system. To create man pages for a given
dll, just type <command>make man</command> from within the dlls directory
or type <command>make manpages</command> in the root directory of the Wine
source tree. You can then check that a man page was generated for your function,
it should be present in the <filename>documentation/man3w</filename> directory
with the same name as the function.
</para>
<para>
Once you have generated the man pages from the source code, running
<command>make install</command> will install them for you. By default they are
installed in section 3w of the manual, so they don't conflict with any existing
man page names. So, to read the man page you should use
<command>man -S 3w {name}</command>. Alternately you can edit
<filename>/etc/man.config</filename> and add 3w to the list of search paths
given in the variable <emphasis>MANSECT</emphasis>.
</para>
<para>
You can also generate HTML output for the API documentation, in this case the
make command is <command>make doc-html</command> in the dll directory,
or <command>make htmlpages</command> from the root. The output will be
placed by default under <filename>documentation/html</filename>. Similarly
you can create SGML source code to produce the <emphasis>Wine Api Guide</emphasis>
with the command <command>make sgmlpages</command>.
</para>
</sect2>
</sect1>
<sect1 id="wine-docbook">
<title>The Wine DocBook System</title>
<para>
Written by &name-john-sheets; <email>&email-john-sheets;</email>
</para>
<para>
Modified by &name-tony-lambregts; <email>&email-tony-lambregts;</email> Nov. 2002
</para>
<sect2 id="writing-docbook">
<title>Writing Documentation with DocBook</title>
<para>
DocBook is a flavor of <acronym>SGML</acronym>
(<firstterm>Standard Generalized Markup
Language</firstterm>), a syntax for marking up the contents
of documents. HTML is another very common flavor of SGML;
DocBook markup looks very similar to HTML markup, although
the names of the markup tags differ.
</para>
<sect3>
<title>Getting Started</title>
<note>
<title>Why SGML?</title>
<para>
The simple answer to that is that SGML allows you
to create multiple formats of a given document from a single
source. Currently it is used to create html, pdf and PS (PostScript)
versions of the Wine books.
</para>
</note>
<note>
<title>What do I need?</title>
<para>
You need the sgml tools. There are various places where you
can get them. The most generic way of geting them is from their
source as discussed below.
</para>
</note>
<note>
<title>Quick instructions</title>
<para>
These are the basic steps to create the Wine books from the sgml source.
</para>
</note>
<orderedlist>
<listItem><para>
Go to <ulink url="http://www.sgmltools.org">http://www.sgmltools.org</ulink>
</para></listitem>
<listItem><para>
Download all of the sgmltools packages
</para></listitem>
<listItem><para>
Install them all and build them (<command>./configure; make; make install</command>)
</para></listitem>
<listItem><para>
Switch to your toplevel Wine directory
</para></listitem>
<listItem><para>
Run <command>./configure</command> (or <command>make distclean && ./configure</command>)
</para></listitem>
<listItem><para>
Switch to the <filename>documentation/</filename> directory
</para></listitem>
<listItem><para>
run <command>./make_winehq</command>
</para></listitem>
<listItem><para>
View <filename>wine-doc/index.html</filename> in your favorite browser
</para></listitem>
</orderedlist>
</sect3>
<sect3>
<title>Getting SGML for various distributions</title>
<para>
Most Linux distributions have everything you need already
bundled up in package form. Unfortunately, each
distribution seems to handle its SGML environment
differently, installing it into different paths, and
naming its packages according to its own whims.
</para>
<sect4>
<title>SGML on Redhat</title>
<para>
The following packages seems to be sufficient for RedHat 7.1. You
will want to be careful about the order in which you install the
rpms.
<itemizedlist>
<listitem><para>sgml-common-*.rpm</para></listitem>
<listitem><para>openjade-*.rpm</para></listitem>
<listitem><para>perl-SGMLSpm-*.rpm</para></listitem>
<listitem><para>docbook-dtd*.rpm</para></listitem>
<listitem><para>docbook-style-dsssl-*.rpm</para></listitem>
<listitem><para>tetex-*.rpm</para></listitem>
<listitem><para>jadetex-*.rpm</para></listitem>
<listitem><para>docbook-utils-*.rpm</para></listitem>
</itemizedlist>
You can also use ghostscript to view the ps format output and
Adobe Acrobat 4 to view the pdf file.
</para>
</sect4>
<sect4>
<title>SGML on Debian</title>
<note>
<title>Fix me</title>
<para>
List package names and install locations...
</para>
</note>
</sect4>
<sect4>
<title>SGML on Other Distributions</title>
<note>
<title>Fix me</title>
<para>
List package names and install locations...
</para>
</note>
</sect4>
</sect3>
<sect3>
<title>Terminology</title>
<para>
SGML markup contains a number of syntactical elements that
serve different purposes in the markup. We'll run through
the basics here to make sure we're on the same page when
we refer to SGML semantics.
</para>
<para>
The basic currency of SGML is the
<firstterm>tag</firstterm>. A simple tag consists of a
pair of angle brackets and the name of the tag. For
example, the <sgmltag>para</sgmltag> tag would appear in
an SGML document as <sgmltag
class="starttag">para</sgmltag>. This start tag indicates
that the immediately following text should be classified
according to the tag. In regular SGML, each opening tag
must have a matching end tag to show where the start tag's
contents end. End tags begin with
<quote><literal>&lt;/</literal></quote> markup, e.g.,
<sgmltag class="endtag">para</sgmltag>.
</para>
<para>
The combination of a start tag, contents, and an end tag
is called an <firstterm>element</firstterm>. SGML
elements can be nested inside of each other, or contain
only text, or may be a combination of both text and other
elements, although in most cases it is better to limit
your elements to one or the other.
</para>
<para>
The <acronym>XML</acronym> (<firstterm>eXtensible Markup
Language</firstterm>) specification, a modern subset of
the SGML specification, adds a so-called <firstterm>empty
tag</firstterm>, for elements that contain no text
content. The entire element is a single tag, ending with
<quote><literal>/&gt;</literal></quote>, e.g.,
<sgmltag>&lt;xref/&gt;</sgmltag>. However, use of this
tag style restricts you to XML DocBook processing, and
your document may no longer compile with SGML-only
processing systems.
</para>
<!-- *** Note: We could normally use the "emptytag"
attribute for XML empty tags, but that's only a recent
addition, and we don't want to screw up documents
generated against older stylesheets.
*** -->
<para>
Often a processing system will need more information about
an element than you can provide with just tags. SGML
allows you to add extra <quote>hints</quote> in the form
of SGML <firstterm>attributes</firstterm> to pass along
this information. The most common use of attributes in
DocBook is giving specific elements a name, or an ID, so
you can refer to it from elsewhere. This ID can be used
for many things, including file-naming for HTML output,
hyper-linking to specific parts of the document, and even
pulling text from that element (see the <sgmltag
class="starttag">xref</sgmltag> tag).
</para>
<para>
An SGML attribute appears inside the start tag, between
the &lt; and &gt; brackets. For example, if you wanted to
set the <sgmltag class="attribute">id</sgmltag> attribute
of the <sgmltag class="starttag">book</sgmltag> element to
<quote>mybook</quote>, you would create a start tag like
this: <programlisting>&lt;book id="mybook"></programlisting>
</para>
<para>
Notice that the contents of the attribute are enclosed in
quote marks. These quotes are optional in SGML, but
mandatory in XML. It's a good habit to use quotes, as it
will make it much easier to migrate your documents to an
XML processing system later on.
</para>
<para>
You can also specify more than one attribute in a single
tag: <programlisting>&lt;book id="mybook" status="draft"></programlisting>
</para>
<para>
Another commonly used type of SGML markup is the
<firstterm>entity</firstterm>. An entity lets you
associate a block of text with a name. You declare the
entity once, at the beginning of your document, and can
invoke it as many times as you like throughout the
document. You can use entities as shorthand, or to make
it easier to maintain certain phrases in a central
location, or even to insert the contents of an entire file
into your document.
</para>
<para>
An entity in your document is always surrounded by the
<quote>&amp;</quote> and <quote>;</quote> characters. One
entity you'll need sooner or later is the one for the
<quote>&lt;</quote> character. Since SGML expects all
tags to begin with a <quote>&lt;</quote>, the
<quote>&lt;</quote> is a reserved character. To use it in
your document (as I am doing here), you must insert it
with the <literal>&amp;lt;</literal> entity. Each time
the SGML processor encounters <literal>&amp;lt;</literal>,
it will place a literal <quote>&lt;</quote> in the output
document. Similarly you must use the <literal>&amp;gt;</literal>
and <literal>&amp;amp;</literal> entities for the
<quote>&gt;</quote> and <quote>&amp;</quote> characters.
</para>
<para>
The final term you'll need to know when writing simple
DocBook documents is the <acronym>DTD</acronym>
(<firstterm>Document Type Declaration</firstterm>). The
DTD defines the flavor of SGML a given document is written
in. It lists all the legal tag names, like <sgmltag
class="starttag">book</sgmltag>, <sgmltag
class="starttag">para</sgmltag>, and so on, and declares
how those tags are allowed to be used together. For
example, it doesn't make sense to put a <sgmltag
class="starttag">book</sgmltag> element inside a <sgmltag
class="starttag">para</sgmltag> paragraph element -- only
the reverse.
</para>
<para>
The DTD thus defines the legal structure of the document.
It also declares which attributes can be used with which
tags. The SGML processing system can use the DTD to make
sure the document is laid out properly before attempting
to process it. SGML-aware text editors like <link
linkend="emacs-psgml">Emacs</link> can also use the DTD to
guide you while you write, offering you choices about
which tags you can add in different places in the
document, and beeping at you when you try to add a tag
where it doesn't belong.
</para>
<para>
Generally, you will declare which DTD you want to use as
the first line of your SGML document. In the case of
DocBook, you will use something like this:
<programlisting>&lt!doctype book PUBLIC "-//OASIS//DTD
DocBook V3.1//EN" []> &lt;book> ...
&lt;/book></programlisting>
</para>
<para>
Note that you must specify your toplevel element inside
the doctype declaration. If you were writing an article
rather than a book, you might use this declaration instead:
<programlisting>&lt!doctype article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" []>
&lt;article>
...
&lt;/article></programlisting>
</para>
</sect3>
<sect3 id="sgml-document">
<title>The Document</title>
<para>
Once you're comfortable with SGML, creating a DocBook
document is quite simple and straightforward. Even
though DocBook contains over 300 different tags, you can
usually get by with only a small subset of those tags.
Most of them are for inline formatting, rather than for
document structuring. Furthermore, the common tags have
short, intuitive names.
</para>
<para>
Below is a (completely nonsensical) example to illustrate
how a simple document might be laid out. Notice that all
<sgmltag class="starttag">chapter</sgmltag> and <sgmltag
class="starttag">sect1</sgmltag> elements have <sgmltag
class="attribute">id</sgmltag> attributes. This is not
mandatory, but is a good habit to get into, as DocBook is
commonly converted into HTML, with a separate generated
file for each <sgmltag class="starttag">book</sgmltag>,
<sgmltag class="starttag">chapter</sgmltag>, and/or <sgmltag
class="starttag">sect1</sgmltag> element. If the given
element has an <sgmltag class="attribute">id</sgmltag>
attribute, the processor will typically name the file
accordingly. Thus, the below document might result in
<filename>index.html</filename>,
<filename>chapter-one.html</filename>,
<filename>blobs.html</filename>, and so on.
</para>
<para>
Also notice the text marked off with <quote>&lt;!--
</quote> and <quote> --&gt;</quote> characters. These
denote SGML comments. SGML processors will completely
ignore anything between these markers, similar to
<quote>/*</quote> and <quote>*/</quote> comments in C
source code.
</para>
<!-- Encase the following SGML excerpt inside a CDATA
block so we don't have to bother converting all
brackets to entities
-->
<programlisting>
<![CDATA[
<!doctype book PUBLIC "-//OASIS//DTD DocBook V3.1//EN" []>
<book id="index">
<bookinfo>
<title>A Poet's Guide to Nonsense</title>
</bookinfo>
<chapter id="chapter-one">
<title>Blobs and Gribbles</title>
<!-- This section contains only one major topic -->
<sect1 id="blobs">
<title>The Story Behind Blobs</title>
<para>
Blobs are often mistaken for ice cubes and rain
puddles...
</para>
</sect1>
<!-- This section contains embedded sub-sections -->
<sect1 id="gribbles">
<title>Your Friend the Gribble</title>
<para>
A Gribble is a cute, unassuming little fellow...
</para>
<sect2 id="gribble-temperament">
<title>Gribble Temperament</title>
<para>
When left without food for several days...
</para>
</sect2>
<sect2 id="gribble-appearance">
<title>Gribble Appearance</title>
<para>
Most Gribbles have a shock of white fur running from...
</para>
</sect2>
</sect1>
</chapter>
<chapter id="chapter-two">
<title>Phantasmagoria</title>
<sect1 id="dretch-pools">
<title>Dretch Pools</title>
<para>
When most poets think of Dretch Pools, they tend to...
</para>
</sect>
</chapter>
</book>
]]>
</programlisting>
</sect3>
<sect3>
<title>Common Elements</title>
<para>
Once you get used to the syntax of SGML, the next hurdle
in writing DocBook documentation is to learn the many
DocBook-specific tag names, and when to use them. DocBook
was created for technical documentation, and as such, the
tag names and document structure are slanted towards the
needs of such documentation.
</para>
<para>
To cover its target audience, DocBook declares a wide
variety of specialized tags, including tags for formatting
source code (with somewhat of a C/C++ bias), computer
prompts, GUI application features, keystrokes, and so on.
DocBook also includes tags for universal formatting needs,
like headers, footnotes, tables, and graphics.
</para>
<para>
We won't cover all of these elements here (over 300
DocBook tags exist!), but we will cover the basics. To
learn more about the other tags, check out the official
DocBook guide, at <ulink
url="http://docbook.org">http://docbook.org</ulink>. To
see how they are used in practice, download the SGML
source for this manual (the Wine Developer Guide) and
browse through it, comparing it to the generated HTML (or
PostScript or PDF).
</para>
<para>
There are often many correct ways to mark up a given piece
of text, and you may have to make guesses about which tag
to use. Sometimes you'll have to make compromises.
However, remember that it is possible to further <link
linkend="docbook-tweaking">customize the output</link> of
the SGML processors. If you don't like the way a certain
tag looks in HTML, that doesn't mean you should choose a
different tag based on its output formatting. The
processing stylesheets can be altered to fix the
formatting of that same tag everywhere in the document
(not just in the place you're working on). For example,
if you're frustrated that the <sgmltag
class="starttag">systemitem</sgmltag> tag doesn't produce
any formatting by default, you should fix the stylesheets,
not change the valid <sgmltag
class="starttag">systemitem</sgmltag> tag to, for example,
an <sgmltag class="starttag">emphasis</sgmltag> tag.
</para>
<para>
Here are the common SGML elements:
</para>
<variablelist>
<title>Structural Elements</title>
<varlistentry>
<term><sgmltag class="starttag">book</sgmltag></term>
<listitem>
<para>
The book is the most common toplevel element, and is
probably the one you should use for your document.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">set</sgmltag></term>
<listitem>
<para>
If you want to group more than one book into a
single unit, you can place them all inside a set.
This is useful when you want to bundle up
documentation in alternate ways. We do this with
the Wine documentation, using a <sgmltag
class="starttag">set</sgmltag> to put everything
into a single directory (see
<filename>documentation/wine-doc.sgml</filename>),
and a <sgmltag class="starttag">book</sgmltag> to
put each Wine guide into a separate directory (see
<filename>documentation/wine-devel.sgml</filename>,
etc.).
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">chapter</sgmltag></term>
<listitem>
<para>
A <sgmltag class="starttag">chapter</sgmltag>
element includes a single entire chapter of the
book.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">part</sgmltag></term>
<listitem>
<para>
If the chapters in your book fall into major
categories or groupings (as in the Wine Developer
Guide), you can place each collection of chapters
into a <sgmltag class="starttag">part</sgmltag>
element.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">sect?</sgmltag></term>
<listitem>
<para>
DocBook has many section elements to divide the
contents of a chapter into smaller chunks. The
encouraged approach is to use the numbered section
tags, <sgmltag class="starttag">sect1</sgmltag>,
<sgmltag class="starttag">sect2</sgmltag>, <sgmltag
class="starttag">sect3</sgmltag>, <sgmltag
class="starttag">sect4</sgmltag>, and <sgmltag
class="starttag">sect5</sgmltag> (if necessary).
These tags must be nested in order: you can't place
a <sgmltag class="starttag">sect3</sgmltag> directly
inside a <sgmltag class="starttag">sect1</sgmltag>.
You have to nest the <sgmltag
class="starttag">sect3</sgmltag> inside a <sgmltag
class="starttag">sect2</sgmltag>, and so forth.
Documents with these explicit section groupings are
easier for SGML processors to deal with, and lead to
better organized documents. DocBook also supplies a
<sgmltag class="starttag">section</sgmltag> element
which you can nest inside itself, but its use is
discouraged in favor of the numbered section tags.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">title</sgmltag></term>
<listitem>
<para>
The title of a book, chapter, part, section, etc.
In most of the major structural elements, like
<sgmltag class="starttag">chapter</sgmltag>,
<sgmltag class="starttag">part</sgmltag>, and the
various section tags, <sgmltag
class="starttag">title</sgmltag> is mandatory. In
other elements like <sgmltag
class="starttag">book</sgmltag> and <sgmltag
class="starttag">note</sgmltag>, it's optional.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">para</sgmltag></term>
<listitem>
<para>
The basic unit of text is the paragraph, represented
by the <sgmltag class="starttag">para</sgmltag> tag.
This is probably the tag you'll use most often. In
fact, in a simple document, you can probably get
away with using only <sgmltag
class="starttag">book</sgmltag>, <sgmltag
class="starttag">chapter</sgmltag>, <sgmltag
class="starttag">title</sgmltag>, and <sgmltag
class="starttag">para</sgmltag>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">article</sgmltag></term>
<listitem>
<para>
For shorter, more targeted documents, like topic
pieces and whitepapers, you can use <sgmltag
class="starttag">article</sgmltag> as your toplevel
element.
</para>
</listitem>
</varlistentry>
</variablelist>
<variablelist>
<title>Inline Formatting Elements</title>
<varlistentry>
<term><sgmltag class="starttag">filename</sgmltag></term>
<listitem>
<para>
The name of a file. You can optionally set the
<sgmltag class="attribute">class</sgmltag> attribute
to <literal>Directory</literal>,
<literal>HeaderFile</literal>, and
<literal>SymLink</literal> to further classify the
filename.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">userinput</sgmltag></term>
<listitem>
<para>
Literal text entered by the user.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">computeroutput</sgmltag></term>
<listitem>
<para>
Literal text output by the computer.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">literal</sgmltag></term>
<listitem>
<para>
A catch-all element for literal computer data. Its
use is somewhat vague; try to use a more specific
tag if possible, like <sgmltag
class="starttag">userinput</sgmltag> or <sgmltag
class="starttag">computeroutput</sgmltag>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">quote</sgmltag></term>
<listitem>
<para>
An inline quotation. This tag typically inserts
quotation marks for you, so you would write <sgmltag
class="starttag">quote</sgmltag>This is a
quote<sgmltag class="endtag">quote</sgmltag> rather
than "This is a quote". This usage may be a little
bulkier, but it does allow for automated formatting
of all quoted material in the document. Thus, if
you wanted all quotations to appear in italic, you
could make the change once in your stylesheet,
rather than doing a search and replace throughout
the document. For larger chunks of quoted text, you
can use <sgmltag
class="starttag">blockquote</sgmltag>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">note</sgmltag></term>
<listitem>
<para>
Insert a side note for the reader. By default, the
SGML processor usually prefixes the content with
"Note:". You can change this text by adding a
<sgmltag class="starttag">title</sgmltag> element.
Thus, to add a visible FIXME comment to the
documentation, you might write:
</para>
<programlisting>
<![CDATA[
<note>
<title>FIXME</title>
<para>This section needs more info about...</para>
</note>
]]></programlisting>
<para>
The results will look something like this:
</para>
<note>
<title>FIXME</title>
<para>This section needs more info about...</para>
</note>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">sgmltag</sgmltag></term>
<listitem>
<para>
Used for inserting SGML tags, etc., into a SGML
document without resorting to a lot of entity
quoting, e.g., &amp;lt;. You can change the
appearance of the text with the <sgmltag
class="attribute">class</sgmltag> attribute. Some
common values of this are
<literal>starttag</literal>,
<literal>endtag</literal>,
<literal>attribute</literal>,
<literal>attvalue</literal>, and even
<literal>sgmlcomment</literal>. See this SGML file,
<filename>documentation/documentation.sgml</filename>,
for examples.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">prompt</sgmltag></term>
<listitem>
<para>
The text used for a computer prompt, for example a
shell prompt, or command-line application prompt.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">replaceable</sgmltag></term>
<listitem>
<para>
Meta-text that should be replaced by the user, not
typed in literally, e.g., in command descriptions
and <parameter>--help</parameter> outputs.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">constant</sgmltag></term>
<listitem>
<para>
A programming constant, e.g.,
<constant>MAX_PATH</constant>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">symbol</sgmltag></term>
<listitem>
<para>
A symbolic value replaced, for example, by a
pre-processor. This applies primarily to C macros,
but may have other uses. Use the <sgmltag
class="starttag">constant</sgmltag> tag instead of
<sgmltag class="starttag">symbol</sgmltag> where
appropriate.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">function</sgmltag></term>
<listitem>
<para>
A programming function name.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">parameter</sgmltag></term>
<listitem>
<para>
Programming language parameters you pass with a
function.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">option</sgmltag></term>
<listitem>
<para>
Parameters you pass to a command-line executable.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">varname</sgmltag></term>
<listitem>
<para>
Variable name, typically in a programming language.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">type</sgmltag></term>
<listitem>
<para>
Programming language types, e.g., from a typedef
definition. May have other uses, too.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">structname</sgmltag></term>
<listitem>
<para>
The name of a C-language <type>struct</type>
declaration, e.g., <structname>sockaddr</structname>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">structfield</sgmltag></term>
<listitem>
<para>
A field inside a C <type>struct</type>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">command</sgmltag></term>
<listitem>
<para>
An executable binary, e.g., <command>wine</command>
or <command>ls</command>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">envar</sgmltag></term>
<listitem>
<para>
An environment variable, e.g, <envar>$PATH</envar>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">systemitem</sgmltag></term>
<listitem>
<para>
A generic catch-all for system-related things, like
OS names, computer names, system resources, etc.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">email</sgmltag></term>
<listitem>
<para>
An email address. The SGML processor will typically
add extra formatting characters, and even a
<literal>mailto:</literal> link for HTML pages.
Usage: <sgmltag
class="starttag">email</sgmltag>user@host.com<sgmltag
class="endtag">email</sgmltag>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">firstterm</sgmltag></term>
<listitem>
<para>
Special emphasis for introducing a new term. Can
also be linked to a <sgmltag
class="starttag">glossary</sgmltag> entry, if
desired.
</para>
</listitem>
</varlistentry>
</variablelist>
<variablelist>
<title>Item Listing Elements</title>
<varlistentry>
<term><sgmltag class="starttag">itemizedlist</sgmltag></term>
<listitem>
<para>
For bulleted lists, no numbering. You can tweak the
layout with SGML attributes.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">orderedlist</sgmltag></term>
<listitem>
<para>
A numbered list; the SGML processor will insert the
numbers for you. You can suggest numbering styles
with the <sgmltag
class="attribute">numeration</sgmltag> attribute.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">simplelist</sgmltag></term>
<listitem>
<para>
A very simple list of items, often inlined. Control
the layout with the <sgmltag
class="attribute">type</sgmltag> attribute.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">variablelist</sgmltag></term>
<listitem>
<para>
A list of terms with definitions or descriptions,
like this very list!
</para>
</listitem>
</varlistentry>
</variablelist>
<variablelist>
<title>Block Text Quoting Elements</title>
<varlistentry>
<term><sgmltag class="starttag">programlisting</sgmltag></term>
<listitem>
<para>
Quote a block of source code. Typically highlighted
in the output and set off from normal text.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">screen</sgmltag></term>
<listitem>
<para>
Quote a block of visible computer output, like the
output of a command or chunks of debug logs.
</para>
</listitem>
</varlistentry>
</variablelist>
<variablelist>
<title>Hyperlink Elements</title>
<varlistentry>
<term><sgmltag class="starttag">link</sgmltag></term>
<listitem>
<para>
Generic hypertext link, used for pointing to other
sections within the current document. You supply
the visible text for the link, plus the name of the <sgmltag
class="attribute">id</sgmltag> attribute of the
element that you want to link to. For example:
<programlisting>&lt;link linkend="configuring-wine">the section on configuring wine&lt;/link>
...
&lt;sect2 id="configuring-wine">
...</programlisting>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">xref</sgmltag></term>
<listitem>
<para>
In-document hyperlink that can generate its own
text. Similar to the <sgmltag
class="starttag">link</sgmltag> tag, you use the
<sgmltag class="attribute">linkend</sgmltag>
attribute to specify which target element you want
to jump to:
</para>
<para>
<programlisting>&lt;xref linkend="configuring-wine">
...
&lt;sect2 id="configuring-wine">
...</programlisting>
</para>
<para>
By default, most SGML processors will autogenerate
some generic text for the <sgmltag
class="starttag">xref</sgmltag> link, like
<quote>Section 2.3.1</quote>. You can use the
<sgmltag class="attribute">endterm</sgmltag>
attribute to grab the visible text content of the
hyperlink from another element:
</para>
<para>
<programlisting>&lt;xref linkend="configuring-wine" endterm="config-title">
...
&lt;sect2 id="configuring-wine">
&lt;title id="config-title">Configuring Wine&lt;/title>
...</programlisting>
</para>
<para>
This would create a link to the
<symbol>configuring-wine</symbol> element,
displaying the text of the
<symbol>config-title</symbol> element for the
hyperlink. Most often, you'll add an <sgmltag
class="attribute">id</sgmltag> attribute to the
<sgmltag class="starttag">title</sgmltag> of the
section you're linking to, as above, in which case
the SGML processor will use the target's title text
for the link text.
</para>
<para>
Alternatively, you can use an <sgmltag
class="attribute">xreflabel</sgmltag> attribute in
the target element tag to specify the link text:
</para>
<programlisting>&lt;sect1 id="configuring-wine" xreflabel="Configuring Wine"></programlisting>
<note>
<para>
<sgmltag class="starttag">xref</sgmltag> is an
empty element. You don't need a closing tag for
it (this is defined in the DTD). In SGML
documents, you should use the form <sgmltag
class="starttag">xref</sgmltag>, while in XML
documents you should use
<sgmltag>&lt;xref/></sgmltag>.
</para>
</note>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">anchor</sgmltag></term>
<listitem>
<para>
An invisible tag, used for inserting <sgmltag
class="attribute">id</sgmltag> attributes into a
document to link to arbitrary places (i.e., when
it's not close enough to link to the top of an
element).
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">ulink</sgmltag></term>
<listitem>
<para>
Hyperlink in URL form, e.g., <ulink
url="http://www.winehq.com">http://www.winehq.com</ulink>.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><sgmltag class="starttag">olink</sgmltag></term>
<listitem>
<para>
Indirect hyperlink; can be used for linking to
external documents. Not often used in practice.
</para>
</listitem>
</varlistentry>
</variablelist>
</sect3>
<sect3>
<title>Multiple SGML files</title>
<para>
How to split an SGML document into multiple files...
</para>
</sect3>
</sect2>
<sect2 id="sgml-environment">
<title>The SGML Environment</title>
<para>
You can write SGML/DocBook documents in any text editor you
might find (although as we'll find in <xref
linkend="emacs-psgml">, some editors are more friendly for
this task than others). However, if you want to convert
those documents into a more friendly form for reading, such
as HTML, PostScript, or PDF, you will need a working SGML
environment. This section attempts to lay out the various
SGML rendering systems, and how they are set up on the
popular Linux distributions.
</para>
<sect3>
<title>DSSSL Environment</title>
<para>
Explain tools and methodologies..
</para>
</sect3>
<sect3>
<title>XSLT Environment</title>
<para>
Explain tools and methodologies...
</para>
</sect3>
</sect2>
<sect2 id="emacs-psgml">
<title>PSGML Mode in Emacs</title>
<para>
Although you can write SGML documentation in any simple text
editor, some editors provide extra support for entering SGML
tags, and for verifying that the SGML you create is valid.
SGML has been around for a long time, and many commercial
editors exist for it; however, until recently open source
SGML editors have been scarce.
</para>
<note>
<title>FIXME</title>
<para>
List the available commercial and open source SGML
editors.
</para>
</note>
<para>
The most commonly used open source SGML editor is Emacs,
with the PSGML <firstterm>mode</firstterm>, or extension.
Emacs does not supply a GUI or WYSIWYG (What You See Is What
You Get) interface, but it does provide many helpful
shortcuts for creating SGML, as well as automatic
formatting, validity checking, and the ability to create
your own macros to simplify complex, repetitive actions.
We'll touch briefly on each of these points.
</para>
<para>
The first thing you need is a working installation of Emacs
(or XEmacs), with the PSGML package. Most Linux
distributions provide both as easy-to-install packages.
</para>
<para>
Next, you'll need a working SGML environment. See <xref
linkend="sgml-environment"> for more info on setting that
up.
</para>
</sect2>
<sect2 id="docbook-build">
<title>The DocBook Build System</title>
<sect3 id="docbook-infrastructure">
<title>Basic Infrastructure</title>
<para>
How the build/make system works (makefiles, db2html,
db2html-winehq, jade, stylesheets).
</para>
</sect3>
<sect3 id="docbook-tweaking">
<title>Tweaking the DSSSL stylesheets</title>
<para>
Things you can tweak, and how to do it (examples from
default.dsl and winehq.dsl).
</para>
</sect3>
<sect3 id="docbook-generating">
<title>Generating docs for Wine web sites</title>
<para>
Explain make_winehq, rsync, etc.
</para>
</sect3>
</sect2>
</sect1>
</chapter>
<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-parent-document:("wine-doc.sgml" "set" "book" "part" "chapter" "")
End:
-->