Sweden-Number/dlls/krnl386.exe16/ioports.c

1184 lines
32 KiB
C

/*
* Emulation of processor ioports.
*
* Copyright 1995 Morten Welinder
* Copyright 1998 Andreas Mohr, Ove Kaaven
* Copyright 2001 Uwe Bonnes
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
*/
/* Known problems:
- only a few ports are emulated.
- real-time clock in "cmos" is bogus. A nifty alarm() setup could
fix that, I guess.
*/
#include "config.h"
#include <stdarg.h>
#include <stdlib.h>
#include <sys/types.h>
#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
#ifdef HAVE_PPDEV
#include <fcntl.h>
#include <errno.h>
#ifdef HAVE_SYS_IOCTL_H
# include <sys/ioctl.h>
#endif
#ifdef HAVE_LINUX_IOCTL_H
# include <linux/ioctl.h>
#endif
#include <linux/ppdev.h>
#endif
#include "windef.h"
#include "winbase.h"
#include "winnls.h"
#include "winreg.h"
#include "winternl.h"
#include "kernel16_private.h"
#include "dosexe.h"
#include "vga.h"
#include "wine/unicode.h"
#include "wine/debug.h"
WINE_DEFAULT_DEBUG_CHANNEL(int);
#ifdef linux
# define DIRECT_IO_ACCESS
#else
# undef DIRECT_IO_ACCESS
#endif
static struct {
WORD countmax;
WORD latch;
BYTE ctrlbyte_ch;
BYTE flags;
LONG64 start_time;
} tmr_8253[3] = {
{0xFFFF, 0, 0x36, 0, 0},
{0x0012, 0, 0x74, 0, 0},
{0x0001, 0, 0xB6, 0, 0},
};
/* two byte read in progress */
#define TMR_RTOGGLE 0x01
/* two byte write in progress */
#define TMR_WTOGGLE 0x02
/* latch contains data */
#define TMR_LATCHED 0x04
/* counter is in update phase */
#define TMR_UPDATE 0x08
/* readback status request */
#define TMR_STATUS 0x10
static BYTE parport_8255[4] = {0x4f, 0x20, 0xff, 0xff};
static BYTE cmosaddress;
static int cmos_image_initialized = 0;
static BYTE cmosimage[64] =
{
0x27, /* 0x00: seconds */
0x34, /* 0X01: seconds alarm */
0x31, /* 0x02: minutes */
0x47, /* 0x03: minutes alarm */
0x16, /* 0x04: hour */
0x15, /* 0x05: hour alarm */
0x00, /* 0x06: week day */
0x01, /* 0x07: month day */
0x04, /* 0x08: month */
0x94, /* 0x09: year */
0x26, /* 0x0a: state A */
0x02, /* 0x0b: state B */
0x50, /* 0x0c: state C */
0x80, /* 0x0d: state D */
0x00, /* 0x0e: state diagnostic */
0x00, /* 0x0f: state state shutdown */
0x40, /* 0x10: floppy type */
0xb1, /* 0x11: reserved */
0x00, /* 0x12: HD type */
0x9c, /* 0x13: reserved */
0x01, /* 0x14: equipment */
0x80, /* 0x15: low base memory */
0x02, /* 0x16: high base memory (0x280 => 640KB) */
0x00, /* 0x17: low extended memory */
0x3b, /* 0x18: high extended memory (0x3b00 => 15MB) */
0x00, /* 0x19: HD 1 extended type byte */
0x00, /* 0x1a: HD 2 extended type byte */
0xad, /* 0x1b: reserved */
0x02, /* 0x1c: reserved */
0x10, /* 0x1d: reserved */
0x00, /* 0x1e: reserved */
0x00, /* 0x1f: installed features */
0x08, /* 0x20: HD 1 low cylinder number */
0x00, /* 0x21: HD 1 high cylinder number */
0x00, /* 0x22: HD 1 heads */
0x26, /* 0x23: HD 1 low pre-compensation start */
0x00, /* 0x24: HD 1 high pre-compensation start */
0x00, /* 0x25: HD 1 low landing zone */
0x00, /* 0x26: HD 1 high landing zone */
0x00, /* 0x27: HD 1 sectors */
0x00, /* 0x28: options 1 */
0x00, /* 0x29: reserved */
0x00, /* 0x2a: reserved */
0x00, /* 0x2b: options 2 */
0x00, /* 0x2c: options 3 */
0x3f, /* 0x2d: reserved */
0xcc, /* 0x2e: low CMOS ram checksum (computed automatically) */
0xcc, /* 0x2f: high CMOS ram checksum (computed automatically) */
0x00, /* 0x30: low extended memory byte */
0x1c, /* 0x31: high extended memory byte */
0x19, /* 0x32: century byte */
0x81, /* 0x33: setup information */
0x00, /* 0x34: CPU speed */
0x0e, /* 0x35: HD 2 low cylinder number */
0x00, /* 0x36: HD 2 high cylinder number */
0x80, /* 0x37: HD 2 heads */
0x1b, /* 0x38: HD 2 low pre-compensation start */
0x7b, /* 0x39: HD 2 high pre-compensation start */
0x21, /* 0x3a: HD 2 low landing zone */
0x00, /* 0x3b: HD 2 high landing zone */
0x00, /* 0x3c: HD 2 sectors */
0x00, /* 0x3d: reserved */
0x05, /* 0x3e: reserved */
0x5f /* 0x3f: reserved */
};
static void IO_FixCMOSCheckSum(void)
{
WORD sum = 0;
int i;
for (i=0x10; i < 0x2d; i++)
sum += cmosimage[i];
cmosimage[0x2e] = sum >> 8; /* yes, this IS hi byte !! */
cmosimage[0x2f] = sum & 0xff;
TRACE("calculated hi %02x, lo %02x\n", cmosimage[0x2e], cmosimage[0x2f]);
}
#ifdef DIRECT_IO_ACCESS
extern int iopl(int level);
static char do_direct_port_access = -1;
static char port_permissions[0x10000];
#define IO_READ 1
#define IO_WRITE 2
#endif /* DIRECT_IO_ACCESS */
#ifdef HAVE_PPDEV
static int do_pp_port_access = -1; /* -1: uninitialized, 1: not available
0: available);*/
#endif
#define BCD2BIN(a) \
((a)%10 + ((a)>>4)%10*10 + ((a)>>8)%10*100 + ((a)>>12)%10*1000)
#define BIN2BCD(a) \
((a)%10 | (a)/10%10<<4 | (a)/100%10<<8 | (a)/1000%10<<12)
static void set_timer(unsigned timer)
{
DWORD val = tmr_8253[timer].countmax;
if (tmr_8253[timer].ctrlbyte_ch & 0x01)
val = BCD2BIN(val);
tmr_8253[timer].flags &= ~TMR_UPDATE;
if (!QueryPerformanceCounter((LARGE_INTEGER*)&tmr_8253[timer].start_time))
WARN("QueryPerformanceCounter should not fail!\n");
switch (timer) {
case 0: /* System timer counter divisor */
DOSVM_SetTimer(val);
break;
case 1: /* RAM refresh */
FIXME("RAM refresh counter handling not implemented !\n");
break;
case 2: /* cassette & speaker */
/* speaker on ? */
if ((parport_8255[1] & 3) == 3)
{
TRACE("Beep (freq: %d) !\n", 1193180 / val);
Beep(1193180 / val, 20);
}
break;
}
}
static WORD get_timer_val(unsigned timer)
{
LARGE_INTEGER time;
WORD maxval, val = tmr_8253[timer].countmax;
BYTE mode = tmr_8253[timer].ctrlbyte_ch >> 1 & 0x07;
/* This is not strictly correct. In most cases the old countdown should
* finish normally (by counting down to 0) or halt and not jump to 0.
* But we are calculating and not counting, so this seems to be a good
* solution and should work well with most (all?) programs
*/
if (tmr_8253[timer].flags & TMR_UPDATE)
return 0;
if (!QueryPerformanceCounter(&time))
WARN("QueryPerformanceCounter should not fail!\n");
time.QuadPart -= tmr_8253[timer].start_time;
if (tmr_8253[timer].ctrlbyte_ch & 0x01)
val = BCD2BIN(val);
switch ( mode )
{
case 0:
case 1:
case 4:
case 5:
maxval = tmr_8253[timer].ctrlbyte_ch & 0x01 ? 9999 : 0xFFFF;
break;
case 2:
case 3:
maxval = val;
break;
default:
ERR("Invalid PIT mode: %d\n", mode);
return 0;
}
val = (val - time.QuadPart) % (maxval + 1);
if (tmr_8253[timer].ctrlbyte_ch & 0x01)
val = BIN2BCD(val);
return val;
}
/**********************************************************************
* IO_port_init
*/
/* set_IO_permissions(int val1, int val)
* Helper function for IO_port_init
*/
#ifdef DIRECT_IO_ACCESS
static void set_IO_permissions(int val1, int val, char rw)
{
int j;
if (val1 != -1) {
if (val == -1) val = 0x3ff;
for (j = val1; j <= val; j++)
port_permissions[j] |= rw;
do_direct_port_access = 1;
val1 = -1;
} else if (val != -1) {
do_direct_port_access = 1;
port_permissions[val] |= rw;
}
}
/* do_IO_port_init_read_or_write(char* temp, char rw)
* Helper function for IO_port_init
*/
static void do_IO_port_init_read_or_write(const WCHAR *str, char rw)
{
int val, val1;
unsigned int i;
WCHAR *end;
static const WCHAR allW[] = {'a','l','l',0};
if (!strcmpiW(str, allW))
{
for (i=0; i < sizeof(port_permissions); i++)
port_permissions[i] |= rw;
}
else
{
val = -1;
val1 = -1;
while (*str)
{
switch(*str)
{
case ',':
case ' ':
case '\t':
set_IO_permissions(val1, val, rw);
val1 = -1;
val = -1;
str++;
break;
case '-':
val1 = val;
if (val1 == -1) val1 = 0;
str++;
break;
default:
if (isdigitW(*str))
{
val = strtoulW( str, &end, 0 );
if (end == str)
{
val = -1;
str++;
}
else str = end;
}
break;
}
}
set_IO_permissions(val1, val, rw);
}
}
static inline BYTE inb( WORD port )
{
BYTE b;
__asm__ __volatile__( "inb %w1,%0" : "=a" (b) : "d" (port) );
return b;
}
static inline WORD inw( WORD port )
{
WORD w;
__asm__ __volatile__( "inw %w1,%0" : "=a" (w) : "d" (port) );
return w;
}
static inline DWORD inl( WORD port )
{
DWORD dw;
__asm__ __volatile__( "inl %w1,%0" : "=a" (dw) : "d" (port) );
return dw;
}
static inline void outb( BYTE value, WORD port )
{
__asm__ __volatile__( "outb %b0,%w1" : : "a" (value), "d" (port) );
}
static inline void outw( WORD value, WORD port )
{
__asm__ __volatile__( "outw %w0,%w1" : : "a" (value), "d" (port) );
}
static inline void outl( DWORD value, WORD port )
{
__asm__ __volatile__( "outl %0,%w1" : : "a" (value), "d" (port) );
}
static void IO_port_init(void)
{
char tmp[1024];
HANDLE root, hkey;
DWORD dummy;
OBJECT_ATTRIBUTES attr;
UNICODE_STRING nameW;
static const WCHAR portsW[] = {'S','o','f','t','w','a','r','e','\\',
'W','i','n','e','\\','V','D','M','\\','P','o','r','t','s',0};
static const WCHAR readW[] = {'r','e','a','d',0};
static const WCHAR writeW[] = {'w','r','i','t','e',0};
do_direct_port_access = 0;
/* Can we do that? */
if (!iopl(3))
{
iopl(0);
RtlOpenCurrentUser( KEY_ALL_ACCESS, &root );
attr.Length = sizeof(attr);
attr.RootDirectory = root;
attr.ObjectName = &nameW;
attr.Attributes = 0;
attr.SecurityDescriptor = NULL;
attr.SecurityQualityOfService = NULL;
RtlInitUnicodeString( &nameW, portsW );
/* @@ Wine registry key: HKCU\Software\Wine\VDM\Ports */
if (!NtOpenKey( &hkey, KEY_ALL_ACCESS, &attr ))
{
RtlInitUnicodeString( &nameW, readW );
if (!NtQueryValueKey( hkey, &nameW, KeyValuePartialInformation, tmp, sizeof(tmp), &dummy ))
{
WCHAR *str = (WCHAR *)((KEY_VALUE_PARTIAL_INFORMATION *)tmp)->Data;
do_IO_port_init_read_or_write(str, IO_READ);
}
RtlInitUnicodeString( &nameW, writeW );
if (!NtQueryValueKey( hkey, &nameW, KeyValuePartialInformation, tmp, sizeof(tmp), &dummy ))
{
WCHAR *str = (WCHAR *)((KEY_VALUE_PARTIAL_INFORMATION *)tmp)->Data;
do_IO_port_init_read_or_write(str, IO_WRITE);
}
NtClose( hkey );
}
NtClose( root );
}
}
#endif /* DIRECT_IO_ACCESS */
#ifdef HAVE_PPDEV
typedef struct _PPDEVICESTRUCT{
int fd; /* NULL if device not available */
char *devicename;
int userbase; /* where wine thinks the ports are */
DWORD lastaccess; /* or NULL if release */
int timeout; /* time in second of inactivity to release the port */
} PPDeviceStruct;
static PPDeviceStruct PPDeviceList[5];
static int PPDeviceNum=0;
static int IO_pp_sort(const void *p1,const void *p2)
{
return ((const PPDeviceStruct*)p1)->userbase - ((const PPDeviceStruct*)p2)->userbase;
}
/* IO_pp_init
*
* Read the ppdev entries from registry, open the device and check
* for necessary IOCTRL
* Report verbose about possible errors
*/
static char IO_pp_init(void)
{
char name[80];
char buffer[256];
HANDLE root, hkey;
int i,idx=0,fd,res,userbase,nports=0;
char * timeout;
char ret=1;
int lasterror;
OBJECT_ATTRIBUTES attr;
UNICODE_STRING nameW;
static const WCHAR configW[] = {'S','o','f','t','w','a','r','e','\\',
'W','i','n','e','\\','V','D','M','\\','p','p','d','e','v',0};
TRACE("\n");
RtlOpenCurrentUser( KEY_ALL_ACCESS, &root );
attr.Length = sizeof(attr);
attr.RootDirectory = root;
attr.ObjectName = &nameW;
attr.Attributes = 0;
attr.SecurityDescriptor = NULL;
attr.SecurityQualityOfService = NULL;
RtlInitUnicodeString( &nameW, configW );
/* @@ Wine registry key: HKCU\Software\Wine\VDM\ppdev */
if (NtOpenKey( &hkey, KEY_ALL_ACCESS, &attr )) hkey = 0;
NtClose( root );
if (!hkey) return 1;
for (;;)
{
DWORD total_size, len;
char temp[256];
KEY_VALUE_FULL_INFORMATION *info = (KEY_VALUE_FULL_INFORMATION *)temp;
if (NtEnumerateValueKey( hkey, idx, KeyValueFullInformation,
temp, sizeof(temp), &total_size )) break;
if (info->Type != REG_SZ) break;
RtlUnicodeToMultiByteN( name, sizeof(name)-1, &len, info->Name, info->NameLength );
name[len] = 0;
RtlUnicodeToMultiByteN( buffer, sizeof(buffer)-1, &len,
(WCHAR *)(temp + info->DataOffset), total_size-info->DataOffset );
buffer[len] = 0;
idx++;
if(nports >4)
{
FIXME("Make the PPDeviceList larger than 5 elements\n");
break;
}
TRACE("Device '%s' at virtual userbase '%s'\n", buffer,name);
timeout = strchr(buffer,',');
if (timeout)
*timeout++=0;
fd=open(buffer,O_RDWR);
lasterror=errno;
if (fd == -1)
{
WARN("Configuration: No access to %s Cause: %s\n",buffer,strerror(lasterror));
WARN("Rejecting configuration item\n");
if (lasterror == ENODEV)
ERR("Is the ppdev module loaded?\n");
continue;
}
userbase = strtol(name, NULL, 16);
if ( errno == ERANGE)
{
WARN("Configuration: Invalid base %s for %s\n",name,buffer);
WARN("Rejecting configuration item\n");
continue;
}
if (ioctl (fd,PPCLAIM,0))
{
ERR("PPCLAIM rejected %s\n",buffer);
ERR("Perhaps the device is already in use or nonexistent\n");
continue;
}
if (nports > 0)
{
for (i=0; i<= nports; i++)
{
if (PPDeviceList[i].userbase == userbase)
{
WARN("Configuration: %s uses the same virtual ports as %s\n",
buffer,PPDeviceList[0].devicename);
WARN("Configuration: Rejecting configuration item\n");
userbase = 0;
break;
}
}
if (!userbase) continue;
}
/* Check for the minimum required IOCTLS */
if ((ioctl(fd,PPRDATA,&res))||
(ioctl(fd,PPRSTATUS,&res))||
(ioctl(fd,PPRCONTROL,&res)))
{
ERR("PPUSER IOCTL not available for parport device %s\n",buffer);
continue;
}
if (ioctl (fd,PPRELEASE,0))
{
ERR("PPRELEASE rejected %s\n",buffer);
ERR("Perhaps the device is already in use or nonexistent\n");
continue;
}
PPDeviceList[nports].devicename = HeapAlloc(GetProcessHeap(), 0, sizeof(buffer)+1);
if (!PPDeviceList[nports].devicename)
{
ERR("No (more) space for devicename\n");
break;
}
strcpy(PPDeviceList[nports].devicename,buffer);
PPDeviceList[nports].fd = fd;
PPDeviceList[nports].userbase = userbase;
PPDeviceList[nports].lastaccess=GetTickCount();
if (timeout)
{
PPDeviceList[nports].timeout = strtol(timeout, NULL, 10);
if (errno == ERANGE)
{
WARN("Configuration: Invalid timeout %s in configuration for %s, Setting to 0\n",
timeout,buffer);
PPDeviceList[nports].timeout = 0;
}
}
else
PPDeviceList[nports].timeout = 0;
nports++;
}
TRACE("found %d ports\n",nports);
NtClose( hkey );
PPDeviceNum= nports;
if (nports > 1)
/* sort in ascending order for userbase for faster access */
qsort (PPDeviceList,PPDeviceNum,sizeof(PPDeviceStruct),IO_pp_sort);
if (nports)
ret=0;
for (idx= 0;idx<PPDeviceNum; idx++)
TRACE("found device %s userbase %x fd %x timeout %d\n",
PPDeviceList[idx].devicename, PPDeviceList[idx].userbase,
PPDeviceList[idx].fd,PPDeviceList[idx].timeout);
/* FIXME:
register a timer callback perhaps every 30 seconds to release unused ports
Set lastaccess = 0 as indicator when port was released
*/
return ret;
}
/* IO_pp_do_access
*
* Do the actual IOCTL
* Return NULL on success
*/
static int IO_pp_do_access(int idx,int ppctl, DWORD* res)
{
int ret;
if (ioctl(PPDeviceList[idx].fd,PPCLAIM,0))
{
ERR("Can't reclaim device %s, PPUSER/PPDEV handling confused\n",
PPDeviceList[idx].devicename);
return 1;
}
ret = ioctl(PPDeviceList[idx].fd,ppctl,res);
if (ioctl(PPDeviceList[idx].fd,PPRELEASE,0))
{
ERR("Can't release device %s, PPUSER/PPDEV handling confused\n",
PPDeviceList[idx].devicename);
return 1;
}
return ret;
}
/* IO_pp_inp
*
* Check if we can satisfy the INP command with some of the configured PPDEV device
* Return NULL on success
*/
static int IO_pp_inp(int port, DWORD* res)
{
int idx,j=0;
for (idx=0;idx<PPDeviceNum ;idx++)
{
j = port - PPDeviceList[idx].userbase;
if (j <0) return 1;
switch (j)
{
case 0:
return IO_pp_do_access(idx,PPRDATA,res);
case 1:
return IO_pp_do_access(idx,PPRSTATUS,res);
case 2:
return IO_pp_do_access(idx,PPRCONTROL,res);
case 0x400:
case 0x402:
case 3:
case 4:
case 0x401:
FIXME("Port 0x%x not accessible for reading with ppdev\n",port);
FIXME("If this is causing problems, try direct port access\n");
return 1;
default:
break;
}
}
return 1;
}
/* IO_pp_outp
*
* Check if we can satisfy the OUTP command with some of the configured PPDEV device
* Return NULL on success
*/
static BOOL IO_pp_outp(int port, DWORD* res)
{
int idx,j=0;
for (idx=0;idx<PPDeviceNum ;idx++)
{
j = port - PPDeviceList[idx].userbase;
if (j <0) return 1;
switch (j)
{
case 0:
return IO_pp_do_access(idx,PPWDATA,res);
case 2:
{
/* We can't switch port direction via PPWCONTROL,
so do it via PPDATADIR
*/
DWORD mode = *res & 0x20;
IO_pp_do_access(idx,PPDATADIR,&mode);
mode = (*res & ~0x20);
return IO_pp_do_access(idx,PPWCONTROL,&mode);
}
case 1:
case 0x400:
case 0x402:
case 3:
case 4:
case 0x401:
FIXME("Port %d not accessible for writing with ppdev\n",port);
FIXME("If this is causing problems, try direct port access\n");
return 1;
default:
break;
}
}
return TRUE;
}
#endif /* HAVE_PPDEV */
/**********************************************************************
* DOSVM_inport
*
* Note: The size argument has to be handled correctly _externally_
* (as we always return a DWORD)
*/
DWORD DOSVM_inport( int port, int size )
{
DWORD res = ~0U;
TRACE("%d-byte value from port 0x%04x\n", size, port );
DOSMEM_InitDosMemory();
#ifdef HAVE_PPDEV
if (do_pp_port_access == -1) do_pp_port_access =IO_pp_init();
if ((do_pp_port_access == 0 ) && (size == 1))
{
if (!IO_pp_inp(port,&res)) return res;
}
#endif
#ifdef DIRECT_IO_ACCESS
if (do_direct_port_access == -1) IO_port_init();
if ((do_direct_port_access)
/* Make sure we have access to the port */
&& (port_permissions[port] & IO_READ))
{
iopl(3);
switch(size)
{
case 1: res = inb( port ); break;
case 2: res = inw( port ); break;
case 4: res = inl( port ); break;
}
iopl(0);
return res;
}
#endif
switch (port)
{
case 0x40:
case 0x41:
case 0x42:
{
BYTE chan = port & 3;
WORD tempval = tmr_8253[chan].flags & TMR_LATCHED
? tmr_8253[chan].latch : get_timer_val(chan);
if (tmr_8253[chan].flags & TMR_STATUS)
{
WARN("Read-back status\n");
/* We differ slightly from the spec:
* - TMR_UPDATE is already set with the first write
* of a two byte counter update
* - 0x80 should be set if OUT signal is 1 (high)
*/
tmr_8253[chan].flags &= ~TMR_STATUS;
res = (tmr_8253[chan].ctrlbyte_ch & 0x3F) |
(tmr_8253[chan].flags & TMR_UPDATE ? 0x40 : 0x00);
break;
}
switch ((tmr_8253[chan].ctrlbyte_ch & 0x30) >> 4)
{
case 0:
res = 0; /* shouldn't happen? */
break;
case 1: /* read lo byte */
res = (BYTE)tempval;
tmr_8253[chan].flags &= ~TMR_LATCHED;
break;
case 3: /* read lo byte, then hi byte */
tmr_8253[chan].flags ^= TMR_RTOGGLE; /* toggle */
if (tmr_8253[chan].flags & TMR_RTOGGLE)
{
res = (BYTE)tempval;
break;
}
/* else [fall through if read hi byte !] */
case 2: /* read hi byte */
res = (BYTE)(tempval >> 8);
tmr_8253[chan].flags &= ~TMR_LATCHED;
break;
}
}
break;
case 0x60:
res = DOSVM_Int09ReadScan(NULL);
break;
case 0x61:
res = (DWORD)parport_8255[1];
break;
case 0x62:
res = (DWORD)parport_8255[2];
break;
case 0x70:
res = (DWORD)cmosaddress;
break;
case 0x71:
if (!cmos_image_initialized)
{
IO_FixCMOSCheckSum();
cmos_image_initialized = 1;
}
res = (DWORD)cmosimage[cmosaddress & 0x3f];
break;
case 0x200:
case 0x201:
res = ~0U; /* no joystick */
break;
case 0x22a:
case 0x22c:
case 0x22e:
res = (DWORD)SB_ioport_in( port );
break;
/* VGA read registers */
case 0x3b4: /* CRT Controller Register - Index (MDA) */
case 0x3b5: /* CRT Controller Register - Other (MDA) */
case 0x3ba: /* General Register - Input status 1 (MDA) */
case 0x3c0: /* Attribute Controller - Address */
case 0x3c1: /* Attribute Controller - Other */
case 0x3c2: /* General Register - Input status 0 */
case 0x3c3: /* General Register - Video subsystem enable */
case 0x3c4: /* Sequencer Register - Address */
case 0x3c5: /* Sequencer Register - Other */
case 0x3c6:
case 0x3c7: /* General Register - DAC State */
case 0x3c8:
case 0x3c9:
case 0x3ca: /* General Register - Feature control */
case 0x3cb:
case 0x3cc: /* General Register - Misc output */
case 0x3cd:
case 0x3ce: /* Graphics Controller Register - Address */
case 0x3cf: /* Graphics Controller Register - Other */
case 0x3d0:
case 0x3d1:
case 0x3d2:
case 0x3d3:
case 0x3d4: /* CRT Controller Register - Index (CGA) */
case 0x3d5: /* CRT Controller Register - Other (CGA) */
case 0x3d6:
case 0x3d7:
case 0x3d8:
case 0x3d9:
case 0x3da:
case 0x3db:
case 0x3dc:
case 0x3dd:
case 0x3de:
case 0x3df:
if (size > 1)
FIXME("Trying to read more than one byte from VGA!\n");
res = (DWORD)VGA_ioport_in( port );
break;
case 0x00:
case 0x01:
case 0x02:
case 0x03:
case 0x04:
case 0x05:
case 0x06:
case 0x07:
case 0xC0:
case 0xC2:
case 0xC4:
case 0xC6:
case 0xC8:
case 0xCA:
case 0xCC:
case 0xCE:
case 0x87:
case 0x83:
case 0x81:
case 0x82:
case 0x8B:
case 0x89:
case 0x8A:
case 0x487:
case 0x483:
case 0x481:
case 0x482:
case 0x48B:
case 0x489:
case 0x48A:
case 0x08:
case 0xD0:
case 0x0D:
case 0xDA:
res = (DWORD)DMA_ioport_in( port );
break;
default:
WARN("Direct I/O read attempted from port %x\n", port);
break;
}
return res;
}
/**********************************************************************
* DOSVM_outport
*/
void DOSVM_outport( int port, int size, DWORD value )
{
TRACE("IO: 0x%x (%d-byte value) to port 0x%04x\n", value, size, port );
DOSMEM_InitDosMemory();
#ifdef HAVE_PPDEV
if (do_pp_port_access == -1) do_pp_port_access = IO_pp_init();
if ((do_pp_port_access == 0) && (size == 1))
{
if (!IO_pp_outp(port,&value)) return;
}
#endif
#ifdef DIRECT_IO_ACCESS
if (do_direct_port_access == -1) IO_port_init();
if ((do_direct_port_access)
/* Make sure we have access to the port */
&& (port_permissions[port] & IO_WRITE))
{
iopl(3);
switch(size)
{
case 1: outb( LOBYTE(value), port ); break;
case 2: outw( LOWORD(value), port ); break;
case 4: outl( value, port ); break;
}
iopl(0);
return;
}
#endif
switch (port)
{
case 0x20:
DOSVM_PIC_ioport_out( port, (BYTE)value );
break;
case 0x40:
case 0x41:
case 0x42:
{
BYTE chan = port & 3;
tmr_8253[chan].flags |= TMR_UPDATE;
switch ((tmr_8253[chan].ctrlbyte_ch & 0x30) >> 4)
{
case 0:
break; /* shouldn't happen? */
case 1: /* write lo byte */
tmr_8253[chan].countmax =
(tmr_8253[chan].countmax & 0xff00) | (BYTE)value;
break;
case 3: /* write lo byte, then hi byte */
tmr_8253[chan].flags ^= TMR_WTOGGLE; /* toggle */
if (tmr_8253[chan].flags & TMR_WTOGGLE)
{
tmr_8253[chan].countmax =
(tmr_8253[chan].countmax & 0xff00) | (BYTE)value;
break;
}
/* else [fall through if write hi byte !] */
case 2: /* write hi byte */
tmr_8253[chan].countmax =
(tmr_8253[chan].countmax & 0x00ff) | ((BYTE)value << 8);
break;
}
/* if programming is finished, update to new value */
if ((tmr_8253[chan].ctrlbyte_ch & 0x30) &&
!(tmr_8253[chan].flags & TMR_WTOGGLE))
set_timer(chan);
}
break;
case 0x43:
{
BYTE chan = ((BYTE)value & 0xc0) >> 6;
/* ctrl byte for specific timer channel */
if (chan == 3)
{
if ( !(value & 0x20) )
{
if (value & 0x02 && !(tmr_8253[0].flags & TMR_LATCHED))
{
tmr_8253[0].flags |= TMR_LATCHED;
tmr_8253[0].latch = get_timer_val(0);
}
if (value & 0x04 && !(tmr_8253[1].flags & TMR_LATCHED))
{
tmr_8253[1].flags |= TMR_LATCHED;
tmr_8253[1].latch = get_timer_val(1);
}
if (value & 0x08 && !(tmr_8253[2].flags & TMR_LATCHED))
{
tmr_8253[2].flags |= TMR_LATCHED;
tmr_8253[2].latch = get_timer_val(2);
}
}
if ( !(value & 0x10) )
{
if (value & 0x02)
tmr_8253[0].flags |= TMR_STATUS;
if (value & 0x04)
tmr_8253[1].flags |= TMR_STATUS;
if (value & 0x08)
tmr_8253[2].flags |= TMR_STATUS;
}
break;
}
switch (((BYTE)value & 0x30) >> 4)
{
case 0: /* latch timer */
if ( !(tmr_8253[chan].flags & TMR_LATCHED) )
{
tmr_8253[chan].flags |= TMR_LATCHED;
tmr_8253[chan].latch = get_timer_val(chan);
}
break;
case 1: /* write lo byte only */
case 2: /* write hi byte only */
case 3: /* write lo byte, then hi byte */
tmr_8253[chan].ctrlbyte_ch = (BYTE)value;
tmr_8253[chan].countmax = 0;
tmr_8253[chan].flags = TMR_UPDATE;
break;
}
}
break;
case 0x61:
parport_8255[1] = (BYTE)value;
if (((parport_8255[1] & 3) == 3) && (tmr_8253[2].countmax != 1))
{
TRACE("Beep (freq: %d) !\n", 1193180 / tmr_8253[2].countmax);
Beep(1193180 / tmr_8253[2].countmax, 20);
}
break;
case 0x70:
cmosaddress = (BYTE)value & 0x7f;
break;
case 0x71:
if (!cmos_image_initialized)
{
IO_FixCMOSCheckSum();
cmos_image_initialized = 1;
}
cmosimage[cmosaddress & 0x3f] = (BYTE)value;
break;
case 0x226:
case 0x22c:
SB_ioport_out( port, (BYTE)value );
break;
/* VGA Write registers */
case 0x3b4: /* CRT Controller Register - Index (MDA) */
case 0x3b5: /* CRT Controller Register - Other (MDA) */
case 0x3ba: /* General Register - Feature Control */
case 0x3c0: /* Attribute Controller - Address/Other */
case 0x3c1:
case 0x3c2: /* General Register - Misc output */
case 0x3c3: /* General Register - Video subsystem enable */
case 0x3c4: /* Sequencer Register - Address */
case 0x3c5: /* Sequencer Register - Other */
case 0x3c6:
case 0x3c7:
case 0x3c8:
case 0x3c9:
case 0x3ca:
case 0x3cb:
case 0x3cc:
case 0x3cd:
case 0x3ce: /* Graphics Controller Register - Address */
case 0x3cf: /* Graphics Controller Register - Other */
case 0x3d0:
case 0x3d1:
case 0x3d2:
case 0x3d3:
case 0x3d4: /* CRT Controller Register - Index (CGA) */
case 0x3d5: /* CRT Controller Register - Other (CGA) */
case 0x3d6:
case 0x3d7:
case 0x3d8:
case 0x3d9:
case 0x3da:
case 0x3db:
case 0x3dc:
case 0x3dd:
case 0x3de:
case 0x3df:
VGA_ioport_out( port, LOBYTE(value) );
if(size > 1) {
VGA_ioport_out( port+1, HIBYTE(value) );
if(size > 2) {
VGA_ioport_out( port+2, LOBYTE(HIWORD(value)) );
VGA_ioport_out( port+3, HIBYTE(HIWORD(value)) );
}
}
break;
case 0x00:
case 0x01:
case 0x02:
case 0x03:
case 0x04:
case 0x05:
case 0x06:
case 0x07:
case 0xC0:
case 0xC2:
case 0xC4:
case 0xC6:
case 0xC8:
case 0xCA:
case 0xCC:
case 0xCE:
case 0x87:
case 0x83:
case 0x81:
case 0x82:
case 0x8B:
case 0x89:
case 0x8A:
case 0x487:
case 0x483:
case 0x481:
case 0x482:
case 0x48B:
case 0x489:
case 0x48A:
case 0x08:
case 0xD0:
case 0x0B:
case 0xD6:
case 0x0A:
case 0xD4:
case 0x0F:
case 0xDE:
case 0x09:
case 0xD2:
case 0x0C:
case 0xD8:
case 0x0D:
case 0xDA:
case 0x0E:
case 0xDC:
DMA_ioport_out( port, (BYTE)value );
break;
default:
WARN("Direct I/O write attempted to port %x\n", port );
break;
}
}