Sweden-Number/documentation/getting.sgml

202 lines
10 KiB
Plaintext

<chapter id="getting-wine">
<title>Getting Wine</title>
<sect1 id="installation-methods">
<title>Wine Installation Methods</title>
<para>
Once you've decided that Wine is right for your needs, the next step is
to decide how you want to install it. There are three methods for
installing Wine from Winehq, each with their own advantages and
disadvantages.
</para>
<sect2 id="installation-methods-package">
<title>Installation from a package</title>
<para>
By far the easiest method for installing Wine is to use a prepackaged
version of Wine. These packages contain ready-to-run Wine binary
files specifically compiled for your distribution, and they are
tested regularly by the packagers for both functionality and
completeness.
</para>
<para>
Packages are the recommended method for installing Wine. We make
them easily available at the
<ulink url="http://www.winehq.org/site/download">WineHQ downloads page
</ulink>, and these are always the latest packages available. Being
popular, Wine packages can also be found elsewhere in official
distribution repositories. These can, however, sometimes be out of
date, depending on the distribution. Packages are easily upgradable
as well, and many distributions can upgrade Wine seamlessly with a
few clicks. Building your own installable binary package from a
source package is also possible, although it is beyond the scope of
this guide.
</para>
</sect2>
<sect2 id="installation-methods-source">
<title>Installation from a source archive</title>
<para>
Sometimes the Wine packages don't fit your needs exactly. Perhaps
they're not available for your architecture or distribution, or
perhaps you want to build wine using your own compiler optimizations
or with some options disabled, or perhaps you need to modify a
specific part of the source code before compilation. Being an open
source project, you are free to do all of these things with Wine's
source code, which is provided with every Wine release. This method
of installation can be done by downloading a Wine source archive and
compiling from the command line. If you are comfortable with such
things and have special needs, this option may be for you.
</para>
<para>
Getting Wine source archives is simple. Every release, we put a
source package in compressed tar.gz format at the
<ulink url="http://www.winehq.org/site/download">WineHQ downloads
page</ulink>. Compiling and installing Wine from source is slightly
more difficult than using a package, however we will cover it in
depth and attempt to hold your hand along the way.
</para>
</sect2>
<sect2 id="installation-methods-cvs">
<title>Installation from a cvs snapshot</title>
<para>
If you wish to try out the bleeding edge of Wine development, or
would even like to help develop Wine yourself, you can download the
very latest source code from our CVS server. Instructions for
downloading from the Wine cvs repository are available at <ulink
url="http://www.winehq.org/site/cvs">http://www.winehq.org/site/cvs
</ulink>.
</para>
<para>
Please take note that the usual warnings for using a developmental
version still apply. The source code on the CVS server is largely
untested and may not even compile properly. It is, however, the
best way to test out how Wine will work in the next version, and if
you're modifying source code it's best to get the latest copy. The
CVS repository is also useful for application maintainers interested
in testing if an application will still work right for the next
release, or if a recent patch actually improves things. If you're
interested in helping us to get an application working in Wine, see
the <ulink url="http://www.winehq.org/site/helping-applications">
guide to helping applications work</ulink>.
</para>
</sect2>
</sect1>
<sect1 id="installing-wine-package">
<title>Installing Wine from a package</title>
<sect2>
<title>Installing a fresh package</title>
<para>
Installing a package on a fresh system is remarkably straightforward.
Simply download and install the package using whatever utility your
distribution provides. There is usually no need to explicitly
remove old packages before installing, as modern Linux distributions
should upgrade and replace them automatically. If you installed
Wine from source code, however, you should remove it before
installing a Wine package. See the section on <link
linkend="uninstalling-wine-source">uninstalling Wine from source
</link> for proper instructions.
</para>
</sect2>
<sect2>
<title>Different Distributions</title>
<para>
Wine works on a huge amount of different Linux distributions, as well
other Unix-like systems such as Solaris and FreeBSD, each with their
own specific way of installing and managing packages. Fortunately,
however, the same general ideas apply to all of them, and installing
Wine should be no more difficult than installing any other software,
no matter what distribution you use. Uninstalling Wine packages is
simple as well, and in modern Linux distributions is usually done
through the same easy interface as package installation.
</para>
<para>
We won't cover the specifics of installing or uninstalling Wine
packages among the various systems' methods of packaging and package
management in this guide, however, up to date installation notes for
particular distributions can be found at the WineHQ website in the
howto, at <ulink url=""></ulink>. If you need further help figuring
out how to simply install a Wine package, we suggest consulting your
distribution's documentation, support forums, or IRC channels.
</para>
</sect2>
</sect1>
<sect1 id="installing-wine-source">
<title>Installing Wine from source</title>
<para>
Before installing Wine from source, make sure you uninstall any Wine
binary packages you may have on your system. Installing from source
requires use of the terminal window as well as a full copy of the
Wine source code. Once having downloaded the source from CVS or
extracted it from an archive, navigate to it using the terminal and
then follow the remaining steps.
</para>
<sect2>
<title>Getting the Build Dependencies</title>
<para>
Wine makes use of many open source libraries during its operation.
While Wine is not strictly dependent on these libraries and will
compile without most of them, much of Wine's functionality is
improved by having them available at compile time. In the past,
many user problems were caused by people not having the necessary
development libraries when they built Wine from source; because of
this reason and others, we highly recommend installing via binary
packages or by building source packages which can automatically
satisfy their build dependencies.
</para>
<para>
If you wish to install build dependencies by hand, there are several
ways to see if you're missing some useful development libraries.
The most straightforward approach is to watch the configure program's
output before you compile Wine and see if anything important is
missing; if it is, simply install what's missing and rerun configure
before compiling. You can also check the file configure generates,
(include/config.h.in) and see if what files configure is looking for
but not finding.
</para>
</sect2>
<sect2 id="compiling-wine">
<title>Compiling Wine</title>
<para>
Once you've installed the build dependencies you need, you're ready
to compile the package. In the terminal window, after having
navigated to the Wine source tree, run the following commands:
<screen>
<prompt>$ </><userinput>./configure</>
<prompt># </><userinput>make depend</>
<prompt># </><userinput>make</>
<prompt># </><userinput>make install</>
</screen>
The last command requires root privileges. Although you should
never run Wine as root, you will need to install it this way.
</para>
</sect2>
<sect2 id="uninstalling-wine-source">
<title>Uninstalling Wine from Source</title>
<para>
To uninstall Wine from source, once again navigate to the same
source folder that you used to install Wine using the terminal.
Then, run the following command:
<screen>
<prompt># </><userinput>make uninstall</>
</screen>
This command will require root privileges, and should remove all of
the Wine binary files from your system. It will not, however,
remove your Wine configuration and applications located in your
user's home directory, so you are free to install another version of
Wine or delete that configuration by hand.
</para>
</sect2>
</sect1>
</chapter>
<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-parent-document:("wine-user.sgml" "set" "book" "chapter" "")
End:
-->