Sweden-Number/documentation/running.sgml

372 lines
15 KiB
Plaintext

<chapter id="running">
<title>Running Wine</title>
<para>
Written by &name-john-sheets; <email>&email-john-sheets;</email>
</para>
<para>
Extended by &name-mike-hearn; <email>&email-mike-hearn;</email>
</para>
<sect1 id="basic-usage">
<title>Basic usage: applications and control panel applets</title>
<para>
Assuming you are using a fake windows installation, you install
applications into Wine in the same way you would in Windows:
by running the installer. You can just accept the defaults
for where to install, most installers will default to "C:\Program Files",
which is fine. If the application installer requests it, you may find that
Wine creates icons on your desktop and in your app menu. If that happens, you
can start the app by clicking on them.
</para>
<para>
The standard way to uninstall things is for the application to provide an
uninstaller, usually registered with the "Add/Remove Programs" control panel
applet. Unfortunately as of the time of writing, Wine doesn't provide an
Add/Remove control panel applet, so you'll have to run the uninstall manually, either
from the menu or from the command line.
</para>
<para>
Some programs install associated control panel applets, examples of this would be
Internet Explorer and QuickTime. You can access the Wine control panel by running:
</para>
<screen>
<prompt>$</prompt> <userinput>wine control</userinput>
</screen>
<para>
which will open a window with the installed control panel applets in it, as in Windows.
</para>
<para>
If the application doesn't install menu or desktop items, you'll need to run the app
from the command line. Remembering where you installed to, something like:
</para>
<screen>
<prompt>$</prompt> <userinput>wine "c:\program files\appname\appname.exe"</userinput>
</screen>
<para>
will probably do the trick. The path isn't case sensitive, but remember to include the double quotes.
Some programs don't always use obvious naming for their directories and EXE files, so you might have
to look inside the program files directory to see what it put where
</para>
</sect1>
<sect1 id="running-wine">
<title>How to run Wine</title>
<para>
Wine is a very complicated piece of software with many ways to
adjust how it runs. With very few exceptions, you can
activate the same set of features through the <link
linkend="configuring">configuration file </link> as you can
with command-line parameters. In this chapter, we'll briefly
discuss these parameters, and match them up with their
corresponding configuration variables.
</para>
<para>
You can invoke the <command>wine --help</command> command to
get a listing of all Wine's command-line parameters:
</para>
<para>
<screen>
Usage: ./wine [options] program_name [arguments]
Options:
--debugmsg name Turn debugging-messages on or off
--dll name Enable or disable built-in DLLs
--help,-h Show this help message
--version,-v Display the Wine version
</screen>
</para>
<para>
You can specify as many options as you want, if any.
Typically, you will want to have your configuration file set
up with a sensible set of defaults; in this case, you can run
<command>wine</command> without explicitly listing any
options. In rare cases, you might want to override certain
parameters on the command line.
</para>
<para>
After the options, you should put the name of the file you
want <command>wine</command> to execute. If the executable is
in the <parameter>Path</parameter> parameter in the
configuration file, you can simply give the executable file
name. However, if the executable is not in
<parameter>Path</parameter>, you must give the full path to
the executable (in Windows format, not UNIX format!). For
example, given a <parameter>Path</parameter> of the following:
</para>
<screen>
[wine]
"Path"="c:\\windows;c:\\windows\\system;e:\\;e:\\test;f:\\"
</screen>
<para>
You could run the file
<filename>c:\windows\system\foo.exe</filename> with:
</para>
<screen>
<prompt>$</prompt> <userinput>wine foo.exe</userinput>
</screen>
<para>
However, you would have to run the file
<filename>c:\myapps\foo.exe</filename> with this command:
</para>
<screen>
<prompt>$</prompt> <userinput>wine c:\\myapps\\foo.exe</userinput>
</screen>
<para>
(note the backslash-escaped "\" !)
</para>
<para>
If you want to run a console program (aka a CUI executable), use
<command>wineconsole</command> instead of <command>wine</command>
to start it. It will display the program in a separate Window
(this requires X11 to be run). If you don't, you'll still be able
to run your program directly in the Unix console where you started it,
but with very limited capacities (so your program might work,
but your mileage may vary). This shall be improved in the future.
</para>
</sect1>
<sect1 id="command-line-options">
<title>Command-Line Options</title>
<sect2 id="config-parameter">
<title>--debugmsg [channels]</title>
<para>
Wine isn't perfect, and many Windows applications still
don't run without bugs under Wine (but then, a lot of programs
don't run without bugs under native Windows either!). To
make it easier for people to track down the causes behind
each bug, Wine provides a number of <firstterm>debug
channels</firstterm> that you can tap into.
</para>
<para>
Each debug channel, when activated, will trigger logging
messages to be displayed to the console where you invoked
<command>wine</command>. From there you can redirect the
messages to a file and examine it at your leisure. But be
forewarned! Some debug channels can generate incredible
volumes of log messages. Among the most prolific offenders
are <parameter>relay</parameter> which spits out a log
message every time a win32 function is called,
<parameter>win</parameter> which tracks windows message
passing, and of course <parameter>all</parameter> which is
an alias for every single debug channel that exists. For a
complex application, your debug logs can easily top 1 MB and
higher. A <parameter>relay</parameter> trace can often
generate more than 10 MB of log messages, depending on how
long you run the application. (As described in the
<link linkend = "config-debug-etc">Debug</link>
section of configuring wine you can
modify what the <parameter>relay</parameter> trace reports).
Logging does slow down Wine
quite a bit, so don't use <parameter>--debugmsg</parameter>
unless you really do want log files.
</para>
<para>
Within each debug channel, you can further specify a
<firstterm>message class</firstterm>, to filter out the
different severities of errors. The four message classes
are:
<simplelist type="inline">
<member><parameter>trace</parameter></member>
<member><parameter>fixme</parameter></member>
<member><parameter>warn</parameter></member>
<member><parameter>err</parameter></member>
</simplelist>.
</para>
<para>
To turn on a debug channel, use the form
<parameter>class+channel</parameter>. To turn it off, use
<parameter>class-channel</parameter>. To list more than one
channel in the same <parameter>--debugmsg</parameter>
option, separate them with commas. For example, to request
<parameter>warn</parameter> class messages in the
<parameter>heap</parameter> debug channel, you could invoke
<command>wine</command> like this:
</para>
<screen>
<prompt>$</prompt> <userinput>wine --debugmsg warn+heap <replaceable>program_name</replaceable></userinput>
</screen>
<para>
If you leave off the message class, <command>wine</command>
will display messages from all four classes for that channel:
</para>
<screen>
<prompt>$</prompt> <userinput>wine --debugmsg +heap <replaceable>program_name</replaceable></userinput>
</screen>
<para>
If you wanted to see log messages for everything except the
relay channel, you might do something like this:
</para>
<screen>
<prompt>$</prompt> <userinput>wine --debugmsg +all,-relay <replaceable>program_name</replaceable></userinput>
</screen>
<para>
Here is a master list of all the debug channels and classes
in Wine. More channels will be added to (or subtracted
from) later versions.
</para>
<table frame="none"><title>Debug Channels</title>
<tgroup cols=5 align="left">
<tbody>
<row><entry>
all</><entry>accel</><entry>advapi</><entry>animate</><entry>aspi</>
</row><row><entry>
atom</><entry>avifile</><entry> bitblt</><entry> bitmap</><entry> caret</>
</row><row><entry>
cdrom</><entry>class</><entry> clipboard</><entry> clipping</><entry>combo</>
</row><row><entry>
comboex</><entry> comm</><entry>commctrl</><entry>commdlg</><entry> console</>
</row><row><entry>
crtdll</><entry>cursor</><entry>datetime</><entry>dc</><entry> ddeml</>
</row><row><entry>
ddraw</><entry> debug</><entry> debugstr</><entry>delayhlp</><entry>dialog</>
</row><row><entry>
dinput</><entry>dll</><entry> dosfs</><entry>dosmem</><entry>dplay</>
</row><row><entry>
driver</><entry>dsound</><entry>edit</><entry>elfdll</><entry>enhmetafile</>
</row><row><entry>
event</><entry>exec</><entry>file</><entry>fixup</><entry>font</>
</row><row><entry>
gdi</><entry> global</><entry>graphics</><entry> header</><entry>heap</>
</row><row><entry>
hook</><entry>hotkey</><entry>icmp</><entry>icon</><entry>imagehlp</>
</row><row><entry>
imagelist</><entry> imm</><entry>int</><entry>int10</><entry>int16</>
</row><row><entry>
int17</><entry>int19</><entry>int21</><entry>int31</><entry> io</>
</row><row><entry>
ipaddress</><entry>joystick</><entry>key</><entry>keyboard</><entry>loaddll</>
</row><row><entry>
ldt</><entry>listbox</><entry>listview</><entry>local</><entry>mci</>
</row><row><entry>
mcianim</><entry>mciavi</><entry>mcicda</><entry>mcimidi</><entry>mciwave</>
</row><row><entry>
mdi</><entry>menu</><entry>message</><entry>metafile</><entry>midi</>
</row><row><entry>
mmaux</><entry>mmio</><entry>mmsys</><entry>mmtime</><entry>module</>
</row><row><entry>
monthcal</><entry>mpr</><entry>msacm</><entry>msg</><entry>msvideo</>
</row><row><entry>
nativefont</><entry>nonclient</><entry>ntdll</><entry>odbc</><entry>ole</>
</row><row><entry>
opengl</><entry>pager</><entry>palette</><entry>pidl</><entry>print</>
</row><row><entry>
process</><entry>profile</><entry>progress</><entry>prop</><entry>propsheet</>
</row><row><entry>
psapi</><entry>psdrv</><entry>ras</><entry>rebar</><entry>reg</>
</row><row><entry>
region</><entry>relay</><entry>resource</><entry>richedit</><entry>scroll</>
</row><row><entry>
segment</><entry>seh</><entry>selector</><entry>sendmsg</><entry>server</>
</row><row><entry>
setupapi</><entry>setupx</><entry>shell</><entry>snoop</><entry>sound</>
</row><row><entry>
static</><entry>statusbar</><entry>storage</><entry>stress</><entry>string</>
</row><row><entry>
syscolor</><entry>system</><entry>tab</><entry>tape</><entry>tapi</>
</row><row><entry>
task</><entry>text</><entry>thread</><entry>thunk</><entry>timer</>
</row><row><entry>
toolbar</><entry>toolhelp</><entry>tooltips</><entry>trackbar</><entry>treeview</>
</row><row><entry>
ttydrv</><entry>tweak</><entry>typelib</><entry>updown</><entry>ver</>
</row><row><entry>
virtual</><entry>vxd</><entry>wave</><entry>win</><entry>win16drv</>
</row><row><entry>
win32</><entry>winedbg</><entry>wing</><entry>wininet</><entry>winsock</>
</row><row><entry>
winspool</><entry>wnet</><entry>x11</>
</row>
</tbody>
</tgroup>
</table>
<para>
For more details about debug channels, check out the
<ulink url="http://wine.codeweavers.com/docs/wine-devel/">
The Wine Developer's Guide</ulink>.
</para>
</sect2>
<sect2>
<title>--dll</title>
<para>
Specifies whether to load the builtin or the native (if
available) version of a DLL.
Example:
<screen>
<prompt>$</prompt> <userinput>wine --dll setupx=n foo.exe</userinput>
</screen>
See the <link linkend="dll-config">DLL chapter</link> for more details.
</para>
</sect2>
<sect2>
<title>--help</title>
<para>
Shows a small command line help page.
</para>
</sect2>
<sect2>
<title>--version</title>
<para>
Shows the Wine version string. Useful to verify your installation.
</para>
</sect2>
</sect1>
<sect1 id="environment-variables">
<title>Setting Windows/DOS environment variables</title>
<para>
Your program might require some environment variable to be set
properly in order to run successfully.
In this case you need to set this environment variable in the
Linux shell, since Wine will pass on the entire shell environment
variable settings to the Windows environment variable space.
Example for the bash shell (other shells may have a different syntax
!):
<screen>
export MYENVIRONMENTVAR=myenvironmentvarsetting
</screen>
This will make sure your Windows program can access the
MYENVIRONMENTVAR environment variable once you start your program
using Wine.
If you want to have MYENVIRONMENTVAR set permanently, then you can
place the setting into /etc/profile, or also ~/.bashrc in the case of
bash.
</para>
<para>
Note however that there is an exception to the rule:
If you want to change the PATH environment variable, then of
course you can't modify it that way, since this will alter the
Unix PATH environment setting. Instead, you should set the
WINEPATH environment variable. An alternative way to
indicate the content of the DOS PATH environment variable would
be to change the "path" setting in the wine config file's <link
linkend="config-wine">[wine]</link> section.
</para>
</sect1>
</chapter>
<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-parent-document:("wine-doc.sgml" "set" "book" "chapter" "")
End:
-->