/* * Copyright 2002-2005 Jason Edmeades * Copyright 2002-2005 Raphael Junqueira * Copyright 2004 Christian Costa * Copyright 2005 Oliver Stieber * Copyright 2007-2011, 2013-2014 Stefan Dösinger for CodeWeavers * Copyright 2009-2010 Henri Verbeet for CodeWeavers * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA * */ #include "config.h" #include "wine/port.h" #include "wined3d_private.h" WINE_DEFAULT_DEBUG_CHANNEL(d3d); #define WINED3D_BUFFER_HASDESC 0x01 /* A vertex description has been found. */ #define WINED3D_BUFFER_CREATEBO 0x02 /* Create a buffer object for this buffer. */ #define WINED3D_BUFFER_DOUBLEBUFFER 0x04 /* Keep both a buffer object and a system memory copy for this buffer. */ #define WINED3D_BUFFER_FLUSH 0x08 /* Manual unmap flushing. */ #define WINED3D_BUFFER_DISCARD 0x10 /* A DISCARD lock has occurred since the last preload. */ #define WINED3D_BUFFER_SYNC 0x20 /* There has been at least one synchronized map since the last preload. */ #define WINED3D_BUFFER_APPLESYNC 0x40 /* Using sync as in GL_APPLE_flush_buffer_range. */ #define VB_MAXDECLCHANGES 100 /* After that number of decl changes we stop converting */ #define VB_RESETDECLCHANGE 1000 /* Reset the decl changecount after that number of draws */ #define VB_MAXFULLCONVERSIONS 5 /* Number of full conversions before we stop converting */ #define VB_RESETFULLCONVS 20 /* Reset full conversion counts after that number of draws */ static void buffer_invalidate_bo_range(struct wined3d_buffer *buffer, UINT offset, UINT size) { if (!offset && !size) goto invalidate_all; if (offset > buffer->resource.size || offset + size > buffer->resource.size) { WARN("Invalid range specified, invalidating entire buffer.\n"); goto invalidate_all; } if (buffer->modified_areas >= buffer->maps_size) { struct wined3d_map_range *new; if (!(new = HeapReAlloc(GetProcessHeap(), 0, buffer->maps, 2 * buffer->maps_size * sizeof(*buffer->maps)))) { ERR("Failed to allocate maps array, invalidating entire buffer.\n"); goto invalidate_all; } buffer->maps = new; buffer->maps_size *= 2; } buffer->maps[buffer->modified_areas].offset = offset; buffer->maps[buffer->modified_areas].size = size; ++buffer->modified_areas; return; invalidate_all: buffer->modified_areas = 1; buffer->maps[0].offset = 0; buffer->maps[0].size = buffer->resource.size; } static inline void buffer_clear_dirty_areas(struct wined3d_buffer *This) { This->modified_areas = 0; } static BOOL buffer_is_dirty(const struct wined3d_buffer *buffer) { return !!buffer->modified_areas; } static BOOL buffer_is_fully_dirty(const struct wined3d_buffer *buffer) { unsigned int i; for (i = 0; i < buffer->modified_areas; ++i) { if (!buffer->maps[i].offset && buffer->maps[i].size == buffer->resource.size) return TRUE; } return FALSE; } /* Context activation is done by the caller */ static void delete_gl_buffer(struct wined3d_buffer *This, const struct wined3d_gl_info *gl_info) { if(!This->buffer_object) return; GL_EXTCALL(glDeleteBuffersARB(1, &This->buffer_object)); checkGLcall("glDeleteBuffersARB"); This->buffer_object = 0; if(This->query) { wined3d_event_query_destroy(This->query); This->query = NULL; } This->flags &= ~WINED3D_BUFFER_APPLESYNC; } /* Context activation is done by the caller. */ static void buffer_create_buffer_object(struct wined3d_buffer *This, struct wined3d_context *context) { GLenum gl_usage = GL_STATIC_DRAW_ARB; GLenum error; const struct wined3d_gl_info *gl_info = context->gl_info; TRACE("Creating an OpenGL vertex buffer object for wined3d_buffer %p with usage %s.\n", This, debug_d3dusage(This->resource.usage)); /* Make sure that the gl error is cleared. Do not use checkGLcall * here because checkGLcall just prints a fixme and continues. However, * if an error during VBO creation occurs we can fall back to non-vbo operation * with full functionality(but performance loss) */ while (gl_info->gl_ops.gl.p_glGetError() != GL_NO_ERROR); /* Basically the FVF parameter passed to CreateVertexBuffer is no good. * The vertex declaration from the device determines how the data in the * buffer is interpreted. This means that on each draw call the buffer has * to be verified to check if the rhw and color values are in the correct * format. */ GL_EXTCALL(glGenBuffersARB(1, &This->buffer_object)); error = gl_info->gl_ops.gl.p_glGetError(); if (!This->buffer_object || error != GL_NO_ERROR) { ERR("Failed to create a VBO with error %s (%#x)\n", debug_glerror(error), error); goto fail; } if (This->buffer_type_hint == GL_ELEMENT_ARRAY_BUFFER_ARB) context_invalidate_state(context, STATE_INDEXBUFFER); GL_EXTCALL(glBindBufferARB(This->buffer_type_hint, This->buffer_object)); error = gl_info->gl_ops.gl.p_glGetError(); if (error != GL_NO_ERROR) { ERR("Failed to bind the VBO with error %s (%#x)\n", debug_glerror(error), error); goto fail; } if (This->resource.usage & WINED3DUSAGE_DYNAMIC) { TRACE("Buffer has WINED3DUSAGE_DYNAMIC set.\n"); gl_usage = GL_STREAM_DRAW_ARB; if(gl_info->supported[APPLE_FLUSH_BUFFER_RANGE]) { GL_EXTCALL(glBufferParameteriAPPLE(This->buffer_type_hint, GL_BUFFER_FLUSHING_UNMAP_APPLE, GL_FALSE)); checkGLcall("glBufferParameteriAPPLE(This->buffer_type_hint, GL_BUFFER_FLUSHING_UNMAP_APPLE, GL_FALSE)"); This->flags |= WINED3D_BUFFER_FLUSH; GL_EXTCALL(glBufferParameteriAPPLE(This->buffer_type_hint, GL_BUFFER_SERIALIZED_MODIFY_APPLE, GL_FALSE)); checkGLcall("glBufferParameteriAPPLE(This->buffer_type_hint, GL_BUFFER_SERIALIZED_MODIFY_APPLE, GL_FALSE)"); This->flags |= WINED3D_BUFFER_APPLESYNC; } /* No setup is needed here for GL_ARB_map_buffer_range */ } /* Reserve memory for the buffer. The amount of data won't change * so we are safe with calling glBufferData once and * calling glBufferSubData on updates. Upload the actual data in case * we're not double buffering, so we can release the heap mem afterwards */ GL_EXTCALL(glBufferDataARB(This->buffer_type_hint, This->resource.size, This->resource.heap_memory, gl_usage)); error = gl_info->gl_ops.gl.p_glGetError(); if (error != GL_NO_ERROR) { ERR("glBufferDataARB failed with error %s (%#x)\n", debug_glerror(error), error); goto fail; } This->buffer_object_usage = gl_usage; if (This->flags & WINED3D_BUFFER_DOUBLEBUFFER) buffer_invalidate_bo_range(This, 0, 0); else wined3d_resource_free_sysmem(&This->resource); return; fail: /* Clean up all vbo init, but continue because we can work without a vbo :-) */ ERR("Failed to create a vertex buffer object. Continuing, but performance issues may occur\n"); delete_gl_buffer(This, gl_info); buffer_clear_dirty_areas(This); } static BOOL buffer_process_converted_attribute(struct wined3d_buffer *This, const enum wined3d_buffer_conversion_type conversion_type, const struct wined3d_stream_info_element *attrib, DWORD *stride_this_run) { DWORD attrib_size; BOOL ret = FALSE; unsigned int i; DWORD_PTR data; /* Check for some valid situations which cause us pain. One is if the buffer is used for * constant attributes(stride = 0), the other one is if the buffer is used on two streams * with different strides. In the 2nd case we might have to drop conversion entirely, * it is possible that the same bytes are once read as FLOAT2 and once as UBYTE4N. */ if (!attrib->stride) { FIXME("%s used with stride 0, let's hope we get the vertex stride from somewhere else\n", debug_d3dformat(attrib->format->id)); } else if(attrib->stride != *stride_this_run && *stride_this_run) { FIXME("Got two concurrent strides, %d and %d\n", attrib->stride, *stride_this_run); } else { *stride_this_run = attrib->stride; if (This->stride != *stride_this_run) { /* We rely that this happens only on the first converted attribute that is found, * if at all. See above check */ TRACE("Reconverting because converted attributes occur, and the stride changed\n"); This->stride = *stride_this_run; HeapFree(GetProcessHeap(), HEAP_ZERO_MEMORY, This->conversion_map); This->conversion_map = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*This->conversion_map) * This->stride); ret = TRUE; } } data = ((DWORD_PTR)attrib->data.addr) % This->stride; attrib_size = attrib->format->component_count * attrib->format->component_size; for (i = 0; i < attrib_size; ++i) { DWORD_PTR idx = (data + i) % This->stride; if (This->conversion_map[idx] != conversion_type) { TRACE("Byte %ld in vertex changed\n", idx); TRACE("It was type %d, is %d now\n", This->conversion_map[idx], conversion_type); ret = TRUE; This->conversion_map[idx] = conversion_type; } } return ret; } #define WINED3D_BUFFER_FIXUP_D3DCOLOR 0x01 #define WINED3D_BUFFER_FIXUP_XYZRHW 0x02 static BOOL buffer_check_attribute(struct wined3d_buffer *This, const struct wined3d_stream_info *si, UINT attrib_idx, DWORD fixup_flags, DWORD *stride_this_run) { const struct wined3d_stream_info_element *attrib = &si->elements[attrib_idx]; enum wined3d_format_id format; BOOL ret = FALSE; /* Ignore attributes that do not have our vbo. After that check we can be sure that the attribute is * there, on nonexistent attribs the vbo is 0. */ if (!(si->use_map & (1 << attrib_idx)) || attrib->data.buffer_object != This->buffer_object) return FALSE; format = attrib->format->id; /* Look for newly appeared conversion */ if (fixup_flags & WINED3D_BUFFER_FIXUP_D3DCOLOR && format == WINED3DFMT_B8G8R8A8_UNORM) { ret = buffer_process_converted_attribute(This, CONV_D3DCOLOR, attrib, stride_this_run); } else if (fixup_flags & WINED3D_BUFFER_FIXUP_XYZRHW && si->position_transformed) { if (format != WINED3DFMT_R32G32B32A32_FLOAT) { FIXME("Unexpected format %s for transformed position.\n", debug_d3dformat(format)); return FALSE; } ret = buffer_process_converted_attribute(This, CONV_POSITIONT, attrib, stride_this_run); } else if (This->conversion_map) { ret = buffer_process_converted_attribute(This, CONV_NONE, attrib, stride_this_run); } return ret; } static BOOL buffer_find_decl(struct wined3d_buffer *This, const struct wined3d_stream_info *si, DWORD fixup_flags) { UINT stride_this_run = 0; BOOL ret = FALSE; /* In d3d7 the vertex buffer declaration NEVER changes because it is stored in the d3d7 vertex buffer. * Once we have our declaration there is no need to look it up again. Index buffers also never need * conversion, so once the (empty) conversion structure is created don't bother checking again */ if (This->flags & WINED3D_BUFFER_HASDESC) { if(This->resource.usage & WINED3DUSAGE_STATICDECL) return FALSE; } if (!fixup_flags) { TRACE("No fixup required.\n"); if(This->conversion_map) { HeapFree(GetProcessHeap(), 0, This->conversion_map); This->conversion_map = NULL; This->stride = 0; return TRUE; } return FALSE; } TRACE("Finding vertex buffer conversion information\n"); /* Certain declaration types need some fixups before we can pass them to * opengl. This means D3DCOLOR attributes with fixed function vertex * processing, FLOAT4 POSITIONT with fixed function, and FLOAT16 if * GL_ARB_half_float_vertex is not supported. * * Note for d3d8 and d3d9: * The vertex buffer FVF doesn't help with finding them, we have to use * the decoded vertex declaration and pick the things that concern the * current buffer. A problem with this is that this can change between * draws, so we have to validate the information and reprocess the buffer * if it changes, and avoid false positives for performance reasons. * WineD3D doesn't even know the vertex buffer any more, it is managed * by the client libraries and passed to SetStreamSource and ProcessVertices * as needed. * * We have to distinguish between vertex shaders and fixed function to * pick the way we access the strided vertex information. * * This code sets up a per-byte array with the size of the detected * stride of the arrays in the buffer. For each byte we have a field * that marks the conversion needed on this byte. For example, the * following declaration with fixed function vertex processing: * * POSITIONT, FLOAT4 * NORMAL, FLOAT3 * DIFFUSE, FLOAT16_4 * SPECULAR, D3DCOLOR * * Will result in * { POSITIONT }{ NORMAL }{ DIFFUSE }{SPECULAR } * [P][P][P][P][P][P][P][P][P][P][P][P][P][P][P][P][0][0][0][0][0][0][0][0][0][0][0][0][F][F][F][F][F][F][F][F][C][C][C][C] * * Where in this example map P means 4 component position conversion, 0 * means no conversion, F means FLOAT16_2 conversion and C means D3DCOLOR * conversion (red / blue swizzle). * * If we're doing conversion and the stride changes we have to reconvert * the whole buffer. Note that we do not mind if the semantic changes, * we only care for the conversion type. So if the NORMAL is replaced * with a TEXCOORD, nothing has to be done, or if the DIFFUSE is replaced * with a D3DCOLOR BLENDWEIGHT we can happily dismiss the change. Some * conversion types depend on the semantic as well, for example a FLOAT4 * texcoord needs no conversion while a FLOAT4 positiont needs one */ ret = buffer_check_attribute(This, si, WINED3D_FFP_POSITION, fixup_flags, &stride_this_run) || ret; fixup_flags &= ~WINED3D_BUFFER_FIXUP_XYZRHW; ret = buffer_check_attribute(This, si, WINED3D_FFP_NORMAL, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_DIFFUSE, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_SPECULAR, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_TEXCOORD0, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_TEXCOORD1, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_TEXCOORD2, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_TEXCOORD3, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_TEXCOORD4, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_TEXCOORD5, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_TEXCOORD6, fixup_flags, &stride_this_run) || ret; ret = buffer_check_attribute(This, si, WINED3D_FFP_TEXCOORD7, fixup_flags, &stride_this_run) || ret; if (!stride_this_run && This->conversion_map) { /* Sanity test */ if (!ret) ERR("no converted attributes found, old conversion map exists, and no declaration change?\n"); HeapFree(GetProcessHeap(), 0, This->conversion_map); This->conversion_map = NULL; This->stride = 0; } if (ret) TRACE("Conversion information changed\n"); return ret; } static inline void fixup_d3dcolor(DWORD *dst_color) { DWORD src_color = *dst_color; /* Color conversion like in drawStridedSlow. watch out for little endianity * If we want that stuff to work on big endian machines too we have to consider more things * * 0xff000000: Alpha mask * 0x00ff0000: Blue mask * 0x0000ff00: Green mask * 0x000000ff: Red mask */ *dst_color = 0; *dst_color |= (src_color & 0xff00ff00); /* Alpha Green */ *dst_color |= (src_color & 0x00ff0000) >> 16; /* Red */ *dst_color |= (src_color & 0x000000ff) << 16; /* Blue */ } static inline void fixup_transformed_pos(float *p) { /* rhw conversion like in position_float4(). */ if (p[3] != 1.0f && p[3] != 0.0f) { float w = 1.0f / p[3]; p[0] *= w; p[1] *= w; p[2] *= w; p[3] = w; } } /* Context activation is done by the caller. */ void buffer_get_memory(struct wined3d_buffer *buffer, struct wined3d_context *context, struct wined3d_bo_address *data) { data->buffer_object = buffer->buffer_object; if (!buffer->buffer_object) { if ((buffer->flags & WINED3D_BUFFER_CREATEBO) && !buffer->resource.map_count) { buffer_create_buffer_object(buffer, context); buffer->flags &= ~WINED3D_BUFFER_CREATEBO; if (buffer->buffer_object) { data->buffer_object = buffer->buffer_object; data->addr = NULL; return; } } data->addr = buffer->resource.heap_memory; } else { data->addr = NULL; } } ULONG CDECL wined3d_buffer_incref(struct wined3d_buffer *buffer) { ULONG refcount = InterlockedIncrement(&buffer->resource.ref); TRACE("%p increasing refcount to %u.\n", buffer, refcount); return refcount; } /* Context activation is done by the caller. */ BYTE *buffer_get_sysmem(struct wined3d_buffer *This, struct wined3d_context *context) { const struct wined3d_gl_info *gl_info = context->gl_info; /* Heap_memory exists if the buffer is double buffered or has no buffer object at all. */ if (This->resource.heap_memory) return This->resource.heap_memory; if (!wined3d_resource_allocate_sysmem(&This->resource)) ERR("Failed to allocate system memory.\n"); if (This->buffer_type_hint == GL_ELEMENT_ARRAY_BUFFER_ARB) context_invalidate_state(context, STATE_INDEXBUFFER); GL_EXTCALL(glBindBufferARB(This->buffer_type_hint, This->buffer_object)); GL_EXTCALL(glGetBufferSubDataARB(This->buffer_type_hint, 0, This->resource.size, This->resource.heap_memory)); This->flags |= WINED3D_BUFFER_DOUBLEBUFFER; return This->resource.heap_memory; } static void buffer_unload(struct wined3d_resource *resource) { struct wined3d_buffer *buffer = buffer_from_resource(resource); TRACE("buffer %p.\n", buffer); if (buffer->buffer_object) { struct wined3d_device *device = resource->device; struct wined3d_context *context; context = context_acquire(device, NULL); /* Download the buffer, but don't permanently enable double buffering */ if (!(buffer->flags & WINED3D_BUFFER_DOUBLEBUFFER)) { buffer_get_sysmem(buffer, context); buffer->flags &= ~WINED3D_BUFFER_DOUBLEBUFFER; } delete_gl_buffer(buffer, context->gl_info); buffer->flags |= WINED3D_BUFFER_CREATEBO; /* Recreate the buffer object next load */ buffer_clear_dirty_areas(buffer); context_release(context); HeapFree(GetProcessHeap(), 0, buffer->conversion_map); buffer->conversion_map = NULL; buffer->stride = 0; buffer->conversion_stride = 0; buffer->flags &= ~WINED3D_BUFFER_HASDESC; } resource_unload(resource); } ULONG CDECL wined3d_buffer_decref(struct wined3d_buffer *buffer) { ULONG refcount = InterlockedDecrement(&buffer->resource.ref); struct wined3d_context *context; TRACE("%p decreasing refcount to %u.\n", buffer, refcount); if (!refcount) { if (buffer->buffer_object) { context = context_acquire(buffer->resource.device, NULL); delete_gl_buffer(buffer, context->gl_info); context_release(context); HeapFree(GetProcessHeap(), 0, buffer->conversion_map); } resource_cleanup(&buffer->resource); buffer->resource.parent_ops->wined3d_object_destroyed(buffer->resource.parent); HeapFree(GetProcessHeap(), 0, buffer->maps); HeapFree(GetProcessHeap(), 0, buffer); } return refcount; } void * CDECL wined3d_buffer_get_parent(const struct wined3d_buffer *buffer) { TRACE("buffer %p.\n", buffer); return buffer->resource.parent; } /* The caller provides a context and binds the buffer */ static void buffer_sync_apple(struct wined3d_buffer *This, DWORD flags, const struct wined3d_gl_info *gl_info) { enum wined3d_event_query_result ret; /* No fencing needs to be done if the app promises not to overwrite * existing data. */ if (flags & WINED3D_MAP_NOOVERWRITE) return; if (flags & WINED3D_MAP_DISCARD) { GL_EXTCALL(glBufferDataARB(This->buffer_type_hint, This->resource.size, NULL, This->buffer_object_usage)); checkGLcall("glBufferDataARB\n"); return; } if(!This->query) { TRACE("Creating event query for buffer %p\n", This); if (!wined3d_event_query_supported(gl_info)) { FIXME("Event queries not supported, dropping async buffer locks.\n"); goto drop_query; } This->query = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*This->query)); if (!This->query) { ERR("Failed to allocate event query memory, dropping async buffer locks.\n"); goto drop_query; } /* Since we don't know about old draws a glFinish is needed once */ gl_info->gl_ops.gl.p_glFinish(); return; } TRACE("Synchronizing buffer %p\n", This); ret = wined3d_event_query_finish(This->query, This->resource.device); switch(ret) { case WINED3D_EVENT_QUERY_NOT_STARTED: case WINED3D_EVENT_QUERY_OK: /* All done */ return; case WINED3D_EVENT_QUERY_WRONG_THREAD: WARN("Cannot synchronize buffer lock due to a thread conflict\n"); goto drop_query; default: ERR("wined3d_event_query_finish returned %u, dropping async buffer locks\n", ret); goto drop_query; } drop_query: if(This->query) { wined3d_event_query_destroy(This->query); This->query = NULL; } gl_info->gl_ops.gl.p_glFinish(); GL_EXTCALL(glBufferParameteriAPPLE(This->buffer_type_hint, GL_BUFFER_SERIALIZED_MODIFY_APPLE, GL_TRUE)); checkGLcall("glBufferParameteriAPPLE(This->buffer_type_hint, GL_BUFFER_SERIALIZED_MODIFY_APPLE, GL_TRUE)"); This->flags &= ~WINED3D_BUFFER_APPLESYNC; } /* The caller provides a GL context */ static void buffer_direct_upload(struct wined3d_buffer *This, const struct wined3d_gl_info *gl_info, DWORD flags) { BYTE *map; UINT start = 0, len = 0; /* This potentially invalidates the element array buffer binding, but the * caller always takes care of this. */ GL_EXTCALL(glBindBufferARB(This->buffer_type_hint, This->buffer_object)); checkGLcall("glBindBufferARB"); if (gl_info->supported[ARB_MAP_BUFFER_RANGE]) { GLbitfield mapflags; mapflags = GL_MAP_WRITE_BIT | GL_MAP_FLUSH_EXPLICIT_BIT; if (flags & WINED3D_BUFFER_DISCARD) mapflags |= GL_MAP_INVALIDATE_BUFFER_BIT; else if (!(flags & WINED3D_BUFFER_SYNC)) mapflags |= GL_MAP_UNSYNCHRONIZED_BIT; map = GL_EXTCALL(glMapBufferRange(This->buffer_type_hint, 0, This->resource.size, mapflags)); checkGLcall("glMapBufferRange"); } else { if (This->flags & WINED3D_BUFFER_APPLESYNC) { DWORD syncflags = 0; if (flags & WINED3D_BUFFER_DISCARD) syncflags |= WINED3D_MAP_DISCARD; else if (!(flags & WINED3D_BUFFER_SYNC)) syncflags |= WINED3D_MAP_NOOVERWRITE; buffer_sync_apple(This, syncflags, gl_info); } map = GL_EXTCALL(glMapBufferARB(This->buffer_type_hint, GL_WRITE_ONLY_ARB)); checkGLcall("glMapBufferARB"); } if (!map) { ERR("Failed to map opengl buffer\n"); return; } while (This->modified_areas) { This->modified_areas--; start = This->maps[This->modified_areas].offset; len = This->maps[This->modified_areas].size; memcpy(map + start, (BYTE *)This->resource.heap_memory + start, len); if (gl_info->supported[ARB_MAP_BUFFER_RANGE]) { GL_EXTCALL(glFlushMappedBufferRange(This->buffer_type_hint, start, len)); checkGLcall("glFlushMappedBufferRange"); } else if (This->flags & WINED3D_BUFFER_FLUSH) { GL_EXTCALL(glFlushMappedBufferRangeAPPLE(This->buffer_type_hint, start, len)); checkGLcall("glFlushMappedBufferRangeAPPLE"); } } GL_EXTCALL(glUnmapBufferARB(This->buffer_type_hint)); checkGLcall("glUnmapBufferARB"); } void buffer_mark_used(struct wined3d_buffer *buffer) { buffer->flags &= ~(WINED3D_BUFFER_SYNC | WINED3D_BUFFER_DISCARD); } /* Context activation is done by the caller. */ void buffer_internal_preload(struct wined3d_buffer *buffer, struct wined3d_context *context, const struct wined3d_state *state) { DWORD flags = buffer->flags & (WINED3D_BUFFER_SYNC | WINED3D_BUFFER_DISCARD); struct wined3d_device *device = buffer->resource.device; UINT start = 0, end = 0, len = 0, vertices; const struct wined3d_gl_info *gl_info; BOOL decl_changed = FALSE; unsigned int i, j; BYTE *data; TRACE("buffer %p.\n", buffer); if (buffer->resource.map_count) { WARN("Buffer is mapped, skipping preload.\n"); return; } buffer_mark_used(buffer); if (!buffer->buffer_object) { /* TODO: Make converting independent from VBOs */ if (buffer->flags & WINED3D_BUFFER_CREATEBO) { buffer_create_buffer_object(buffer, context); buffer->flags &= ~WINED3D_BUFFER_CREATEBO; } else { /* Not doing any conversion */ return; } } /* Reading the declaration makes only sense if we have valid state information * (i.e., if this function is called during draws). */ if (state) { DWORD fixup_flags = 0; if (!use_vs(state)) { if (!context->gl_info->supported[ARB_VERTEX_ARRAY_BGRA]) fixup_flags |= WINED3D_BUFFER_FIXUP_D3DCOLOR; if (!context->d3d_info->xyzrhw) fixup_flags |= WINED3D_BUFFER_FIXUP_XYZRHW; } decl_changed = buffer_find_decl(buffer, &context->stream_info, fixup_flags); buffer->flags |= WINED3D_BUFFER_HASDESC; } if (!decl_changed && !(buffer->flags & WINED3D_BUFFER_HASDESC && buffer_is_dirty(buffer))) { ++buffer->draw_count; if (buffer->draw_count > VB_RESETDECLCHANGE) buffer->decl_change_count = 0; if (buffer->draw_count > VB_RESETFULLCONVS) buffer->full_conversion_count = 0; return; } /* If applications change the declaration over and over, reconverting all the time is a huge * performance hit. So count the declaration changes and release the VBO if there are too many * of them (and thus stop converting) */ if (decl_changed) { ++buffer->decl_change_count; buffer->draw_count = 0; if (buffer->decl_change_count > VB_MAXDECLCHANGES || (buffer->conversion_map && (buffer->resource.usage & WINED3DUSAGE_DYNAMIC))) { FIXME("Too many declaration changes or converting dynamic buffer, stopping converting\n"); buffer_unload(&buffer->resource); buffer->flags &= ~WINED3D_BUFFER_CREATEBO; /* The stream source state handler might have read the memory of * the vertex buffer already and got the memory in the vbo which * is not valid any longer. Dirtify the stream source to force a * reload. This happens only once per changed vertexbuffer and * should occur rather rarely. */ device_invalidate_state(device, STATE_STREAMSRC); return; } /* The declaration changed, reload the whole buffer. */ WARN("Reloading buffer because of a vertex declaration change.\n"); buffer_invalidate_bo_range(buffer, 0, 0); /* Avoid unfenced updates, we might overwrite more areas of the buffer than the application * cleared for unsynchronized updates */ flags = 0; } else { /* However, it is perfectly fine to change the declaration every now and then. We don't want a game that * changes it every minute drop the VBO after VB_MAX_DECL_CHANGES minutes. So count draws without * decl changes and reset the decl change count after a specific number of them */ if (buffer->conversion_map && buffer_is_fully_dirty(buffer)) { ++buffer->full_conversion_count; if (buffer->full_conversion_count > VB_MAXFULLCONVERSIONS) { FIXME("Too many full buffer conversions, stopping converting.\n"); buffer_unload(&buffer->resource); buffer->flags &= ~WINED3D_BUFFER_CREATEBO; if (buffer->resource.bind_count) device_invalidate_state(device, STATE_STREAMSRC); return; } } else { ++buffer->draw_count; if (buffer->draw_count > VB_RESETDECLCHANGE) buffer->decl_change_count = 0; if (buffer->draw_count > VB_RESETFULLCONVS) buffer->full_conversion_count = 0; } } if (buffer->buffer_type_hint == GL_ELEMENT_ARRAY_BUFFER_ARB) device_invalidate_state(device, STATE_INDEXBUFFER); if (!buffer->conversion_map) { /* That means that there is nothing to fixup. Just upload from * buffer->resource.heap_memory directly into the vbo. Do not * free the system memory copy because drawPrimitive may need it if * the stride is 0, for instancing emulation, vertex blending * emulation or shader emulation. */ TRACE("No conversion needed.\n"); /* Nothing to do because we locked directly into the vbo */ if (!(buffer->flags & WINED3D_BUFFER_DOUBLEBUFFER)) { return; } buffer_direct_upload(buffer, context->gl_info, flags); return; } gl_info = context->gl_info; if(!(buffer->flags & WINED3D_BUFFER_DOUBLEBUFFER)) { buffer_get_sysmem(buffer, context); } /* Now for each vertex in the buffer that needs conversion */ vertices = buffer->resource.size / buffer->stride; data = HeapAlloc(GetProcessHeap(), 0, buffer->resource.size); while(buffer->modified_areas) { buffer->modified_areas--; start = buffer->maps[buffer->modified_areas].offset; len = buffer->maps[buffer->modified_areas].size; end = start + len; memcpy(data + start, (BYTE *)buffer->resource.heap_memory + start, end - start); for (i = start / buffer->stride; i < min((end / buffer->stride) + 1, vertices); ++i) { for (j = 0; j < buffer->stride; ++j) { switch (buffer->conversion_map[j]) { case CONV_NONE: /* Done already */ j += 3; break; case CONV_D3DCOLOR: fixup_d3dcolor((DWORD *) (data + i * buffer->stride + j)); j += 3; break; case CONV_POSITIONT: fixup_transformed_pos((float *) (data + i * buffer->stride + j)); j += 15; break; default: FIXME("Unimplemented conversion %d in shifted conversion\n", buffer->conversion_map[j]); } } } GL_EXTCALL(glBindBufferARB(buffer->buffer_type_hint, buffer->buffer_object)); checkGLcall("glBindBufferARB"); GL_EXTCALL(glBufferSubDataARB(buffer->buffer_type_hint, start, len, data + start)); checkGLcall("glBufferSubDataARB"); } HeapFree(GetProcessHeap(), 0, data); } void CDECL wined3d_buffer_preload(struct wined3d_buffer *buffer) { struct wined3d_context *context; context = context_acquire(buffer->resource.device, NULL); buffer_internal_preload(buffer, context, NULL); context_release(context); } struct wined3d_resource * CDECL wined3d_buffer_get_resource(struct wined3d_buffer *buffer) { TRACE("buffer %p.\n", buffer); return &buffer->resource; } HRESULT CDECL wined3d_buffer_map(struct wined3d_buffer *buffer, UINT offset, UINT size, BYTE **data, DWORD flags) { LONG count; BYTE *base; TRACE("buffer %p, offset %u, size %u, data %p, flags %#x\n", buffer, offset, size, data, flags); flags = wined3d_resource_sanitize_map_flags(&buffer->resource, flags); /* Filter redundant WINED3D_MAP_DISCARD maps. The 3DMark2001 multitexture * fill rate test seems to depend on this. When we map a buffer with * GL_MAP_INVALIDATE_BUFFER_BIT, the driver is free to discard the * previous contents of the buffer. The r600g driver only does this when * the buffer is currently in use, while the proprietary NVIDIA driver * appears to do this unconditionally. */ if (buffer->flags & WINED3D_BUFFER_DISCARD) flags &= ~WINED3D_MAP_DISCARD; count = ++buffer->resource.map_count; if (buffer->buffer_object) { /* DISCARD invalidates the entire buffer, regardless of the specified * offset and size. Some applications also depend on the entire buffer * being uploaded in that case. Two such applications are Port Royale * and Darkstar One. */ if (flags & WINED3D_MAP_DISCARD) buffer_invalidate_bo_range(buffer, 0, 0); else if (!(flags & WINED3D_MAP_READONLY)) buffer_invalidate_bo_range(buffer, offset, size); if (!(buffer->flags & WINED3D_BUFFER_DOUBLEBUFFER)) { if (count == 1) { struct wined3d_device *device = buffer->resource.device; struct wined3d_context *context; const struct wined3d_gl_info *gl_info; context = context_acquire(device, NULL); gl_info = context->gl_info; if (buffer->buffer_type_hint == GL_ELEMENT_ARRAY_BUFFER_ARB) context_invalidate_state(context, STATE_INDEXBUFFER); GL_EXTCALL(glBindBufferARB(buffer->buffer_type_hint, buffer->buffer_object)); if (gl_info->supported[ARB_MAP_BUFFER_RANGE]) { GLbitfield mapflags = wined3d_resource_gl_map_flags(flags); buffer->map_ptr = GL_EXTCALL(glMapBufferRange(buffer->buffer_type_hint, 0, buffer->resource.size, mapflags)); checkGLcall("glMapBufferRange"); } else { if (buffer->flags & WINED3D_BUFFER_APPLESYNC) buffer_sync_apple(buffer, flags, gl_info); buffer->map_ptr = GL_EXTCALL(glMapBufferARB(buffer->buffer_type_hint, GL_READ_WRITE_ARB)); checkGLcall("glMapBufferARB"); } if (((DWORD_PTR)buffer->map_ptr) & (RESOURCE_ALIGNMENT - 1)) { WARN("Pointer %p is not %u byte aligned.\n", buffer->map_ptr, RESOURCE_ALIGNMENT); GL_EXTCALL(glUnmapBufferARB(buffer->buffer_type_hint)); checkGLcall("glUnmapBufferARB"); buffer->map_ptr = NULL; if (buffer->resource.usage & WINED3DUSAGE_DYNAMIC) { /* The extra copy is more expensive than not using VBOs at * all on the Nvidia Linux driver, which is the only driver * that returns unaligned pointers */ TRACE("Dynamic buffer, dropping VBO\n"); buffer_unload(&buffer->resource); buffer->flags &= ~WINED3D_BUFFER_CREATEBO; if (buffer->resource.bind_count) device_invalidate_state(device, STATE_STREAMSRC); } else { TRACE("Falling back to doublebuffered operation\n"); buffer_get_sysmem(buffer, context); } TRACE("New pointer is %p.\n", buffer->resource.heap_memory); buffer->map_ptr = NULL; } context_release(context); } } if (flags & WINED3D_MAP_DISCARD) buffer->flags |= WINED3D_BUFFER_DISCARD; else if (!(flags & WINED3D_MAP_NOOVERWRITE)) buffer->flags |= WINED3D_BUFFER_SYNC; } base = buffer->map_ptr ? buffer->map_ptr : buffer->resource.heap_memory; *data = base + offset; TRACE("Returning memory at %p (base %p, offset %u).\n", *data, base, offset); /* TODO: check Flags compatibility with buffer->currentDesc.Usage (see MSDN) */ return WINED3D_OK; } void CDECL wined3d_buffer_unmap(struct wined3d_buffer *buffer) { ULONG i; TRACE("buffer %p.\n", buffer); /* In the case that the number of Unmap calls > the * number of Map calls, d3d returns always D3D_OK. * This is also needed to prevent Map from returning garbage on * the next call (this will happen if the lock_count is < 0). */ if (!buffer->resource.map_count) { WARN("Unmap called without a previous map call.\n"); return; } if (--buffer->resource.map_count) { /* Delay loading the buffer until everything is unlocked */ TRACE("Ignoring unmap.\n"); return; } if (!(buffer->flags & WINED3D_BUFFER_DOUBLEBUFFER) && buffer->buffer_object) { struct wined3d_device *device = buffer->resource.device; const struct wined3d_gl_info *gl_info; struct wined3d_context *context; context = context_acquire(device, NULL); gl_info = context->gl_info; if (buffer->buffer_type_hint == GL_ELEMENT_ARRAY_BUFFER_ARB) context_invalidate_state(context, STATE_INDEXBUFFER); GL_EXTCALL(glBindBufferARB(buffer->buffer_type_hint, buffer->buffer_object)); if (gl_info->supported[ARB_MAP_BUFFER_RANGE]) { for (i = 0; i < buffer->modified_areas; ++i) { GL_EXTCALL(glFlushMappedBufferRange(buffer->buffer_type_hint, buffer->maps[i].offset, buffer->maps[i].size)); checkGLcall("glFlushMappedBufferRange"); } } else if (buffer->flags & WINED3D_BUFFER_FLUSH) { for (i = 0; i < buffer->modified_areas; ++i) { GL_EXTCALL(glFlushMappedBufferRangeAPPLE(buffer->buffer_type_hint, buffer->maps[i].offset, buffer->maps[i].size)); checkGLcall("glFlushMappedBufferRangeAPPLE"); } } GL_EXTCALL(glUnmapBufferARB(buffer->buffer_type_hint)); if (wined3d_settings.strict_draw_ordering) gl_info->gl_ops.gl.p_glFlush(); /* Flush to ensure ordering across contexts. */ context_release(context); buffer_clear_dirty_areas(buffer); buffer->map_ptr = NULL; } else if (buffer->flags & WINED3D_BUFFER_HASDESC) { wined3d_buffer_preload(buffer); } } static const struct wined3d_resource_ops buffer_resource_ops = { buffer_unload, }; static HRESULT buffer_init(struct wined3d_buffer *buffer, struct wined3d_device *device, UINT size, DWORD usage, enum wined3d_format_id format_id, enum wined3d_pool pool, GLenum bind_hint, const char *data, void *parent, const struct wined3d_parent_ops *parent_ops) { const struct wined3d_gl_info *gl_info = &device->adapter->gl_info; const struct wined3d_format *format = wined3d_get_format(gl_info, format_id); HRESULT hr; BOOL dynamic_buffer_ok; if (!size) { WARN("Size 0 requested, returning WINED3DERR_INVALIDCALL\n"); return WINED3DERR_INVALIDCALL; } hr = resource_init(&buffer->resource, device, WINED3D_RTYPE_BUFFER, format, WINED3D_MULTISAMPLE_NONE, 0, usage, pool, size, 1, 1, size, parent, parent_ops, &buffer_resource_ops); if (FAILED(hr)) { WARN("Failed to initialize resource, hr %#x\n", hr); return hr; } buffer->buffer_type_hint = bind_hint; TRACE("size %#x, usage %#x, format %s, memory @ %p, iface @ %p.\n", buffer->resource.size, buffer->resource.usage, debug_d3dformat(buffer->resource.format->id), buffer->resource.heap_memory, buffer); if (device->create_parms.flags & WINED3DCREATE_SOFTWARE_VERTEXPROCESSING) { /* SWvp always returns the same pointer in buffer maps and retains data in DISCARD maps. * Keep a system memory copy of the buffer to provide the same behavior to the application. * Still use a VBO to support OpenGL 3 core contexts. */ TRACE("Using doublebuffer mode because of software vertex processing\n"); buffer->flags |= WINED3D_BUFFER_DOUBLEBUFFER; } dynamic_buffer_ok = gl_info->supported[APPLE_FLUSH_BUFFER_RANGE] || gl_info->supported[ARB_MAP_BUFFER_RANGE]; /* Observations show that drawStridedSlow is faster on dynamic VBs than converting + * drawStridedFast (half-life 2 and others). * * Basically converting the vertices in the buffer is quite expensive, and observations * show that drawStridedSlow is faster than converting + uploading + drawStridedFast. * Therefore do not create a VBO for WINED3DUSAGE_DYNAMIC buffers. */ if (!gl_info->supported[ARB_VERTEX_BUFFER_OBJECT]) { TRACE("Not creating a vbo because GL_ARB_vertex_buffer is not supported\n"); } else if(buffer->resource.pool == WINED3D_POOL_SYSTEM_MEM) { TRACE("Not creating a vbo because the vertex buffer is in system memory\n"); } else if(!dynamic_buffer_ok && (buffer->resource.usage & WINED3DUSAGE_DYNAMIC)) { TRACE("Not creating a vbo because the buffer has dynamic usage and no GL support\n"); } else { buffer->flags |= WINED3D_BUFFER_CREATEBO; } if (data) { BYTE *ptr; hr = wined3d_buffer_map(buffer, 0, size, &ptr, 0); if (FAILED(hr)) { ERR("Failed to map buffer, hr %#x\n", hr); buffer_unload(&buffer->resource); resource_cleanup(&buffer->resource); return hr; } memcpy(ptr, data, size); wined3d_buffer_unmap(buffer); } buffer->maps = HeapAlloc(GetProcessHeap(), 0, sizeof(*buffer->maps)); if (!buffer->maps) { ERR("Out of memory\n"); buffer_unload(&buffer->resource); resource_cleanup(&buffer->resource); return E_OUTOFMEMORY; } buffer->maps_size = 1; return WINED3D_OK; } HRESULT CDECL wined3d_buffer_create(struct wined3d_device *device, const struct wined3d_buffer_desc *desc, const void *data, void *parent, const struct wined3d_parent_ops *parent_ops, struct wined3d_buffer **buffer) { struct wined3d_buffer *object; HRESULT hr; TRACE("device %p, desc %p, data %p, parent %p, buffer %p\n", device, desc, data, parent, buffer); object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object)); if (!object) return E_OUTOFMEMORY; FIXME("Ignoring access flags (pool)\n"); hr = buffer_init(object, device, desc->byte_width, desc->usage, WINED3DFMT_UNKNOWN, WINED3D_POOL_MANAGED, GL_ARRAY_BUFFER_ARB, data, parent, parent_ops); if (FAILED(hr)) { WARN("Failed to initialize buffer, hr %#x.\n", hr); HeapFree(GetProcessHeap(), 0, object); return hr; } object->desc = *desc; TRACE("Created buffer %p.\n", object); *buffer = object; return WINED3D_OK; } HRESULT CDECL wined3d_buffer_create_vb(struct wined3d_device *device, UINT size, DWORD usage, enum wined3d_pool pool, void *parent, const struct wined3d_parent_ops *parent_ops, struct wined3d_buffer **buffer) { struct wined3d_buffer *object; HRESULT hr; TRACE("device %p, size %u, usage %#x, pool %#x, parent %p, parent_ops %p, buffer %p.\n", device, size, usage, pool, parent, parent_ops, buffer); if (pool == WINED3D_POOL_SCRATCH) { /* The d3d9 tests shows that this is not allowed. It doesn't make much * sense anyway, SCRATCH buffers wouldn't be usable anywhere. */ WARN("Vertex buffer in WINED3D_POOL_SCRATCH requested, returning WINED3DERR_INVALIDCALL.\n"); *buffer = NULL; return WINED3DERR_INVALIDCALL; } object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object)); if (!object) { *buffer = NULL; return WINED3DERR_OUTOFVIDEOMEMORY; } hr = buffer_init(object, device, size, usage, WINED3DFMT_VERTEXDATA, pool, GL_ARRAY_BUFFER_ARB, NULL, parent, parent_ops); if (FAILED(hr)) { WARN("Failed to initialize buffer, hr %#x.\n", hr); HeapFree(GetProcessHeap(), 0, object); return hr; } TRACE("Created buffer %p.\n", object); *buffer = object; return WINED3D_OK; } HRESULT CDECL wined3d_buffer_create_ib(struct wined3d_device *device, UINT size, DWORD usage, enum wined3d_pool pool, void *parent, const struct wined3d_parent_ops *parent_ops, struct wined3d_buffer **buffer) { struct wined3d_buffer *object; HRESULT hr; TRACE("device %p, size %u, usage %#x, pool %#x, parent %p, parent_ops %p, buffer %p.\n", device, size, usage, pool, parent, parent_ops, buffer); object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*object)); if (!object) { *buffer = NULL; return WINED3DERR_OUTOFVIDEOMEMORY; } hr = buffer_init(object, device, size, usage | WINED3DUSAGE_STATICDECL, WINED3DFMT_UNKNOWN, pool, GL_ELEMENT_ARRAY_BUFFER_ARB, NULL, parent, parent_ops); if (FAILED(hr)) { WARN("Failed to initialize buffer, hr %#x\n", hr); HeapFree(GetProcessHeap(), 0, object); return hr; } TRACE("Created buffer %p.\n", object); *buffer = object; return WINED3D_OK; }