Configuring WineSetting up config files, etc.General Configuration
Copyright 1999 &name-adam-sacarny; &email-adam-sacarny;
(Extracted from wine/documentation/config)
The Wine Config File
The Wine config file stores various settings for Wine. These include:
Drives and information about them
Directory settings
Port settings
The Wine look and feel
Wine's DLL usage
Wine's multimedia drivers and DLL configuration
How Do I Make One?
This section will guide you through the process of making a
config file. Take a look at the file <dirs to
wine>/documentation/samples/config. It is organized by section.
Section NameNeeded?What it Does[Drive X]yesSets up drives recognized by wine[wine]yesSettings for wine directories[DllDefaults]recmdDefaults for loading DLL's[DllPairs]recmdSanity checkers for DLL's[DllOverrides]recmdOverides defaults for DLL loading[x11drv]recmdGraphic driver settings[fonts]yesFont appearance and recognition[serialports]noCOM ports seen by wine[parallelports]noLPT ports seen by wine[ppdev]noParallelport emulation[spooler]noPrint spooling[ports]noDirect port access[spy]noWhat to do with certain debug messages[Registry]noSpecifies locations of windows registry files[tweak.layout]recmdAppearance of wine[programs]noPrograms to be run automatically[Console]noConsole settings[Clipboard]noInteraction for wine and X11 clipboard[afmdirs]noPostscript driver settings[WinMM]yesMultimedia settings[AppDefaults]noOverwrite the settings of previous sections for special programsThe [Drive X] Section
These sections are supposed to make certain Unix
directory locations accessible to Wine as a DOS/Windows drive
(drive 'X:') and thus accessible to Windows programs
under the drive name you specified.
Every DOS/Windows program sort of expects at least a C: drive (and
sometimes also an A: floppy drive), so your config file should
at least contain the corresponding sections, [Drive C] and
[Drive A].
You need to decide on whether you want to use an existing Windows
partition as the C drive or whether you want to create your own
Wine drive C directory tree somewhere (take care about
permissions !).
Each drive section may specify up to 6 different settings
as explained below.
[Drive X]
The above line begins the section for a drive whose letter is X
(DOS notation: drive 'X:').
You could e.g. create an equivalent to a drive 'C:'
under DOS/Windows by using a [Drive C] section name.
"Path" = "/dir/to/path"
This specifies the directory where the drive will begin.
When Wine is browsing in drive X, it will be able
to see the files that are in the directory
/dir/to/path and below.
(note that symlinks to directories won't get included !
see "ShowDirSymlinks"
config setting)
You can also make use of environment variables like $HOME here,
an example for using a mywinedrive directory in your home dir
would be
"Path" = "${HOME}/mywinedrive"
Don't forget to leave off the trailing slash!
"Type" = "hd|cdrom|network|floppy"
Sets up the type of drive Wine will see it as. Type must
equal one of the four floppy,
hd, cdrom, or
network. They are self-explanatory.
(The |'s mean "Type = '<one of the options>'".)
Usually, you choose "hd" for a drive ("hd" is default anyway).
"Label" = "blah"
Defines the drive label. Generally only needed
for programs that look for a special CD-ROM.
The label may be up to 11 characters.
Note that the preferred way of managing labels and serial numbers
of CD-ROMs and floppies is to give Wine raw device access for
reading these on a per-CD case (see "Device" below) instead of
hardcoding one specific "Label".
"Serial" = "deadbeef"
Tells Wine the serial number of the drive. A few programs with
intense protection for pirating might need this, but otherwise
it's not needed. Up to 8 characters and hexadecimal.
Using a "Device" entry instead of hardcoding the "Serial" probably
is a smarter choice.
"Filesystem" = "win95|unix|msdos"
Sets up the way Wine looks at files on the drive.
win95
Case insensitive. Alike to Windows 9x/NT 4. This is
the long filename filesystem you are probably used
to working with. The filesystem of choice for most
applications to be run under wine. PROBABLY THE ONE
YOU WANT!
unix
Case sensitive. This filesystem has almost no use
(Windows apps expect case insensitive filenames).
Try it if you dare, but win95 is a much better
choice.
msdos
Case insensitive filesystem. Alike to DOS and
Windows 3.x. 8.3 is the maximum
length of files (eightdot.123) - longer ones will be
truncated. (NOTE: this is a very bad choice if you
plan on running apps that use long filenames. win95
should work fine with apps that were designed to run
under the msdos system. In other words, you might
not want to use this.)
"Device" = "/dev/xx"
Needed for raw device access and label and serial number reading.
Use this ONLY for floppy and cdrom devices. Using it on
Extended2 or other Unix file systems can have dire results
(when a windows app tries to do a lowlevel write,
they do it in a FAT way -- FAT format is completely different from
any Unix file system).
Also, make sure that you have proper permissions to this device
file.
This setting is not really important; almost all apps
will have no problem if it remains unspecified. For
CD-ROMs it's quite useful in order to get automatic label
detection, though. If you are unsure about specifying
device names, just leave out this setting for your
drives.
Here are a few sample entries:
Here is a setup for Drive C, a generic hard drive:
[Drive C]
"Path" = "/dosc"
"Type" = "hd"
"Label" = "Hard Drive"
"Filesystem" = "win95"
This is a setup for Drive E, a generic CD-ROM drive:
[Drive E]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "Total Annihilation"
"Filesystem" = "win95"
"Device" = "/dev/cdrom"
And here is a setup for Drive A, a generic floppy drive:
[Drive A]
"Type" = "floppy"
"Path" = "/mnt/floppy"
"Label" = "Floppy Drive"
"Serial" = "87654321"
"Filesystem" = "win95"
"Device" = "/dev/fd0"
The [wine] Section
The [wine] section of the configuration file contains all kinds
of general settings for Wine.
"Windows" = "c:\\windows"
This tells Wine and Windows programs where the
Windows directory is. It is
recommended to have this directory somewhere on your
configured C drive, and it's also
recommended to just call the directory "windows" (this is
the default setup on Windows, and some stupid applications
might rely on this). So in case you chose a "Windows"
setting of "c:\\windows" and you chose to set up a drive C
e.g. at /usr/local/wine_c, the
corresponding directory would be
/usr/local/wine_c/windows. Make one
if you don't already have one. NO TRAILING SLASH (NOT
C:\\windows\)! Write access strongly
recommended!
"System" = "c:\\windows\\system"
This sets up where the windows system files are. The Windows
system directory should reside below the directory used for the
Windows setting.
Thus when using the example above, the system directory would be
/usr/local/wine_c/windows/system.
Again, no trailing slash, and write access!
"Temp" = "c:\\temp" This should
be the directory you want your temp files stored in,
/usr/local/wine_c/temp in our example.
Again, no trailing slash, and WRITE ACCESS!!
"Path" = "c:\\windows;c:\\windows\\system;c:\\blanco"
Behaves like the PATH setting on UNIX
boxes. When wine is run like wine
sol.exe, if sol.exe
resides in a directory specified in the
Path setting, wine will run it (Of
course, if sol.exe resides in the
current directory, wine will run that one). Make sure it
always has your windows directory and
system directory (For this setup, it must have
"c:\\windows;c:\\windows\\system").
"GraphicsDriver" = "x11drv|ttydrv"
Sets the graphics driver to use for Wine output.
x11drv is for X11 output, ttydrv is for text console output.
WARNING: if you use ttydrv here, then you won't be able to run
any Windows GUI programs. Thus this option is mainly interesting
for e.g. embedded use of Wine in web server scripts.
"Printer" = "off|on" Tells wine
whether to allow printing via printer drivers to work.
This option isn't needed for our builtin psdrv printer driver
at all.
Using these things are pretty alpha, so you might want to
watch out. Some people might find it useful, however. If
you're not planning on working on printing via windows printer
drivers, don't even add this to your wine config file
(It probably isn't already in it).
Check out the [spooler] and [parallelports] sections too.
"ShellLinker" = "wineshelllink"
This setting specifies the shell linker script to use for setting
up Windows icons in e.g. KDE or Gnome that are given by programs
making use of appropriate shell32.dll functionality to create
icons on the desktop/start menu during installation.
"ShowDirSymlinks" = "1"
Wine doesn't pass directory symlinks to Windows programs by
default, as doing so may crash some programs that do
recursive lookups of whole subdirectory trees
whenever a directory symlink points back to itself or one of its
parent directories.
That's why we disallowed the use of directory symlinks
and added this setting to reenable ("1") this functionality.
"SymbolTableFile" = "wine.sym"
Sets up the symbol table file for the wine debugger. You
probably don't need to fiddle with this. May be useful if
your wine is stripped.
Introduction To DLL Sections
There are a few things you will need to know before
configuring the DLL sections in your wine configuration
file.
Windows DLL Pairs
Most windows DLL's have a win16 (Windows 3.x) and win32
(Windows 9x/NT) form. The combination of the win16 and
win32 DLL versions are called the "DLL pair". This is a
list of the most common pairs:
Win16Win32
Native
Is it possible to use native dll with wine?
(See next section)
KERNELKERNEL32No!USERUSER32No!SHELLSHELL32YesGDIGDI32No!COMMDLGCOMDLG32YesVERVERSIONYesDifferent Forms Of DLL's
There are a few different forms of DLL's wine can load:
native
The DLL's that are included with windows. Many
windows DLL's can be loaded in their native
form. Many times these native versions work
better than their non-Microsoft equivalent --
other times they don't.
builtin
The most common form of DLL loading. This is
what you will use if the DLL is error-prone in
native form (KERNEL for example), you don't have
the native DLL, or you just want to be
Microsoft-free.
so
Native ELF libraries. Will not work yet.
elfdll
ELF encapsulated windows DLL's.
No longer used, ignored.
The [DllDefaults] Section
These settings provide wine's default handling of DLL loading.
"DefaultLoadOrder" =" native, so, builtin"
This setting is a comma-delimited list of the order in
which to attempt loading DLLs. If the first option fails,
it will try the second, and so on. The order specified
above is probably the best in most conditions.
The [DllPairs] Section
At one time, there was a section called [DllPairs] in the
default configuration file, but this has been obsoleted
because the pairing information has now been embedded into
Wine itself. (The purpose of this section was merely to be
able to issue warnings if the user attempted to pair
codependent 16-bit/32-bit DLLs of different types.) If you
still have this in your ~/.wine/.config or
wine.conf, you may safely delete it.
The [DllOverrides] Section
The format for this section is the same for each line:
<DLL>{,<DLL>,<DLL>...} = <FORM>{,<FORM>,<FORM>...}
For example, to load builtin KERNEL pair (case doesn't
matter here):
"kernel,kernel32" = "builtin"
To load the native COMMDLG pair, but if that doesn't work
try builtin:
"commdlg,comdlg32" = "native,builtin"
To load the native COMCTL32:
"comctl32" = "native"
Here is a good generic setup (As it is defined in config
that was included with your wine package):
[DllOverrides]
"rpcrt4" = "builtin, native"
"oleaut32" = "builtin, native"
"ole32" = "builtin, native"
"commdlg" = "builtin, native"
"comdlg32" = "builtin, native"
"ver" = "builtin, native"
"version" = "builtin, native"
"shell" = "builtin, native"
"shell32" = "builtin, native"
"shfolder" = "builtin, native"
"shlwapi" = "builtin, native"
"shdocvw" = "builtin, native"
"lzexpand" = "builtin, native"
"lz32" = "builtin, native"
"comctl32" = "builtin, native"
"commctrl" = "builtin, native"
"advapi32" = "builtin, native"
"crtdll" = "builtin, native"
"mpr" = "builtin, native"
"winspool.drv" = "builtin, native"
"ddraw" = "builtin, native"
"dinput" = "builtin, native"
"dsound" = "builtin, native"
"opengl32" = "builtin, native"
"msvcrt" = "native, builtin"
"msvideo" = "builtin, native"
"msvfw32" = "builtin, native"
"mcicda.drv" = "builtin, native"
"mciseq.drv" = "builtin, native"
"mciwave.drv" = "builtin, native"
"mciavi.drv" = "native, builtin"
"mcianim.drv" = "native, builtin"
"msacm.drv" = "builtin, native"
"msacm" = "builtin, native"
"msacm32" = "builtin, native"
"midimap.drv" = "builtin, native"
; you can specify applications too
"notepad.exe" = "native, builtin"
; default for all other dlls
"*" = "native, builtin"
If loading of the libraries that are listed first fails,
wine will just go on by using the second or third option.
The [fonts] Section
This section sets up wine's font handling.
"Resolution" = "96"
Since the way X handles fonts is different from the way
Windows does, wine uses a special mechanism to deal with
them. It must scale them using the number defined in the
"Resolution" setting. 60-120 are reasonable values, 96 is
a nice in the middle one. If you have the real windows
fonts available (<dirs to
wine>/documentation/ttfserver and
fonts), this parameter will not be as
important. Of course, it's always good to get your X fonts
working acceptably in wine.
"Default" = "-adobe-times-"
The default font wine uses. Fool around with it if you'd like.
OPTIONAL:
The Alias setting allows you to map an X font to a font
used in wine. This is good for apps that need a special font you don't have,
but a good replacement exists. The syntax is like so:
"AliasX" = "[Fake windows name],[Real X name]"<,optional "masking" section>
Pretty straightforward. Replace "AliasX" with "Alias0",
then "Alias1" and so on. The fake windows name is the name
that the font will be under a windows app in wine. The
real X name is the font name as seen by X (Run
"xfontsel"). The optional "masking" section allows you to
utilize the fake windows name you define. If it is not
used, then wine will just try to extract the fake windows
name itself and not use the value you enter.
Here is an example of an alias without masking. The font will show up in windows
apps as "Google".
"Alias0" = "Foo,--google-"
Here is an example with masking enabled. The font will show up as "Foo" in
windows apps.
"Alias1" = "Foo,--google-,subst"
For more info check out the Fonts
chapter.
The [serialports], [parallelports], [spooler], and [ports] Sections
Even though it sounds like a lot of sections, these are
all closely related. They are all for communications and
parallel ports.
The [serialports] section tells wine what serial ports it
is allowed to use.
"ComX" = "/dev/cuaY"
Replace X with the number of the COM
port in Windows (1-8) and Y with the
number of it in X (Usually the number
of the port in Windows minus 1). ComX
can actually equal any device
(/dev/modem is acceptable). It is
not always necessary to define any COM ports (An optional
setting). Here is an example:
"Com1" = "/dev/cua0"
Use as many of these as you like in the section to define
all of the COM ports you need.
The [parallelports] section sets up any parallel ports
that will be allowed access under wine.
"LptX" = "/dev/lpY"
Sounds familiar? Syntax is just like the COM port setting.
Replace X with a value from 1-4 as it
is in Windows and Y with a value from
0-3 (Y is usually the value in windows
minus 1, just like for COM ports). You don't always need
to define a parallel port (AKA, it's optional). As with
the other section, LptX can equal any device (Maybe
/dev/printer). Here is an
example: "Lpt1" = "/dev/lp0"
The [spooler] section will inform wine where to spool
print jobs. Use this if you want to try printing. Wine
docs claim that spooling is "rather primitive" at this
time, so it won't work perfectly. IT IS OPTIONAL. The only
setting you use in this section works to map a port (LPT1,
for example) to a file or a command. Here is an example,
mapping LPT1 to the file out.ps:
"LPT1:" = "out.ps"
The following command maps printing jobs to LPT1 to the
command lpr. Notice the |:
"LPT1:" = "|lpr"
The [ports] section is usually useful only for people who
need direct port access for programs requiring dongles or
scanners. IF YOU DON'T NEED IT, DON'T USE IT!
"read" = "0x779,0x379,0x280-0x2a0"
Gives direct read access to those IO's.
"write" = "0x779,0x379,0x280-0x2a0"
Gives direct write access to those IO's. It's probably a
good idea to keep the values of the
read and write
settings the same. This stuff will only work when you're
root.
The [spy], [Registry], [tweak.layout], and [programs] Sections
[spy] is used to include or exclude debug messages, and to
output them to a file. The latter is rarely used. THESE
ARE ALL OPTIONAL AND YOU PROBABLY DON'T NEED TO ADD OR
REMOVE ANYTHING IN THIS SECTION TO YOUR CONFIG.
"File" = "/blanco"
Sets the logfile for wine. Set to CON to log to standard out.
THIS IS RARELY USED.
"Exclude" = "WM_SIZE;WM_TIMER;"
Excludes debug messages about WM_SIZE
and WM_TIMER in the logfile.
"Include" = "WM_SIZE;WM_TIMER;"
Includes debug messages about WM_SIZE
and WM_TIMER in the logfile.
[Registry] can be used to tell wine where your old windows
registry files exist. This section is completely optional
and useless to people using wine without an existing
windows installation.
"UserFileName" = "/dirs/to/user.reg"
The location of your old user.reg file.
[tweak.layout] is devoted to wine's look. There is only
one setting for it.
"WineLook" = "win31|win95|win98"
Will change the look of wine from Windows 3.1 to Windows 95.
The win98 setting behaves
just like win95 most of the time.
[programs] can be used to say what programs run under
special conditions.
"Default" = "/program/to/execute.exe"
Sets the program to be run if wine is started without specifying a program.
"Startup" = "/program/to/execute.exe"
Sets the program to automatically be run at startup every time.
The [WinMM] Section
[WinMM] is used to define which multimedia drivers have to be loaded. Since
those drivers may depend on the multimedia interfaces available on your sustem
(OSS, Alsa... to name a few), it's needed to be able to configure which driver
has to be loaded.
The content of the section looks like:
[WinMM]
"Drivers" = "wineoss.drv"
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"
All the keys must be defined:
The "Drivers" key is a ';' separated list of modules name, each of
them containing a low level driver. All those drivers will be loaded
when MMSYSTEM/WINMM is started and will provide their inner features.
The "WaveMapper" represents the name of the module containing the Wave
Mapper driver. Only one wave mapper can be defined in the system.
The "MidiMapper" represents the name of the module containing the MIDI
Mapper driver. Only one MIDI mapper can be defined in the system.
The [AppDefaults] Section
The section is used to overwrite certain settings of this file for a
special program with different settings.
[AppDefaults] is not the real name of the section. The real name
consists of the leading word AppDefaults followed by the name
of the executable the section is valid for.
The end of the section name is the name of the
corresponding "standard" section of the configuration file
that should have some of its settings overwritten with the
application specific settings you define.
The three parts of the section name are separated by two backslashes.
Currently wine supports only overwriting the sections
[DllOverrides], [x11drv], [version] and [dsound].
Here is an example that overwrites the normal settings for a
program:
;; default settings
[x11drv]
"Managed" = "Y"
"Desktop" = "N"
;; run install in desktop mode
[AppDefaults\\install.exe\\x11drv]
"Managed" = "N"
"Desktop" = "800x600"
Where Do I Put It?
The wine config file can go in two places.
/usr/local/etc/wine.conf
A systemwide config file, used for anyone who doesn't
have their own. NOTE: this file is currently unused as a
new global configuration mechanism is not in place at this
time.
$HOME/.wine/config
Your own config file (which only is used for your user).
So copy your version of the wine config file to
$HOME/.wine/config
or /usr/local/etc/wine.conf
for wine to recognize it.
What If It Doesn't Work?
There is always a chance that things will go wrong. If the
unthinkable happens, report the problem to
Wine Bugzilla,
try the newsgroup
comp.emulators.ms-windows.wine,
or the IRCnet channel #WineHQ found on
irc.stealth.net:6668, or connected servers.
Make sure that you have looked over this document thoroughly,
and have also read:
READMEhttp://www.winehq.org/trouble/
If indeed it looks like you've done your research, be
prepared for helpful suggestions. If you haven't, brace
yourself for heaving flaming.
Configuring the x11drv Driver
Written by &name-ove-kaaven; &email-ove-kaaven;
(Extracted from wine/documentation/x11drv)
Most Wine users run Wine under the windowing system known as
X11. During most of Wine's history, this was the only display
driver available, but in recent years, parts of Wine has been
reorganized to allow for other display drivers (although the
only alternative currently available is Patrik Stridvall's
ncurses-based ttydrv, which he claims works for displaying
calc.exe). The display driver is chosen with the
GraphicsDriver option in the [wine] section
of ~/.wine/config, but I will only cover the
x11drv driver in this article.
x11drv modes of operation
Note: This is now all done in the config file. Needs an update...
The x11drv driver consists of two conceptually distinct
pieces, the graphics driver (GDI part), and the windowing
driver (USER part). Both of these are linked into the
libx11drv.so module, though (which you
load with the GraphicsDriver option). In
Wine, running on X11, the graphics driver must draw on
drawables (window interiors) provided by the windowing
driver. This differs a bit from the Windows model, where the
windowing system creates and configures device contexts
controlled by the graphics driver, and applications are
allowed to hook into this relationship anywhere they like.
Thus, to provide any reasonable tradeoff between
compatibility and usability, the x11drv has three different
modes of operation.
Unmanaged/Normal
The default. Window-manager-independent (any running
window manager is ignored completely). Window
decorations (title bars, borders, etc) are drawn by
Wine to look and feel like the real Windows. This is
compatible with applications that depend on being able
to compute the exact sizes of any such decorations, or
that want to draw their own.
Managed
Specified by using the Managed
wine config file option (see below).
Ordinary top-level frame windows with thick borders,
title bars, and system menus will be managed by your
window manager. This lets these applications integrate
better with the rest of your desktop, but may not
always work perfectly. (A rewrite of this mode of
operation, to make it more robust and less patchy, is
highly desirable, though, and is planned to be done
before the Wine 1.0 release.)
Desktop-in-a-Box
Specified by using the Desktop
wine config file option (see below).
(adding a geometry, e.g. 800x600
for a such-sized desktop, or
even 800x600+0+0 to
automatically position the desktop at the upper-left
corner of the display). This is the mode most
compatible with the Windows model. All application
windows will just be Wine-drawn windows inside the
Wine-provided desktop window (which will itself be
managed by your window manager), and Windows
applications can roam freely within this virtual
workspace and think they own it all, without
disturbing your other X apps.
Note: currently there's on desktop window for every
application; this will be fixed in the future.
The [x11drv] sectionManaged
Wine can let frame windows be managed by your window
manager. This option specifies whether you want that
by default.
Desktop
Creates a main desktop window of a specified size
to display all Windows applications in.
The size argument could e.g. be "800x600".
DXGrab
If you don't use DGA, you may want an alternative
means to convince the mouse cursor to stay within the
game window. This option does that. Of course, as with
DGA, if Wine crashes, you're in trouble (although not
as badly as in the DGA case, since you can still use
the keyboard to get out of X).
UseDGA
This specifies whether you want DirectDraw to use
XFree86's Direct Graphics
Architecture (DGA), which is able to
take over the entire display and run the game
full-screen at maximum speed. (With DGA1 (XFree86
3.x), you still have to configure the X server to the
game's requested bpp first, but with DGA2 (XFree86
4.x), runtime depth-switching may be possible,
depending on your driver's capabilities.) But be aware
that if Wine crashes while in DGA mode, it may not be
possible to regain control over your computer without
rebooting. DGA normally requires either root
privileges or read/write access to
/dev/mem.
UseXShm
If you don't want DirectX to use DGA, you can at least
use X Shared Memory extensions (XShm). It is much
slower than DGA, since the app doesn't have direct
access to the physical frame buffer, but using shared
memory to draw the frame is at least faster than
sending the data through the standard X11 socket, even
though Wine's XShm support is still known to crash
sometimes.
DesktopDoubleBuffered
Applies only if you use the
--desktop command-line option
to run in a desktop window. Specifies whether to
create the desktop window with a double-buffered
visual, something most OpenGL games need to run
correctly.
AllocSystemColors
Applies only if you have a palette-based display, i.e.
if your X server is set to a depth of 8bpp, and if you
haven't requested a private color map. It specifies
the maximum number of shared colormap cells (palette
entries) Wine should occupy. The higher this value,
the less colors will be available to other
applications.
PrivateColorMap
Applies only if you have a palette-based display, i.e.
if your X server is set to a depth of 8bpp. It
specifies that you don't want to use the shared color
map, but a private color map, where all 256 colors are
available. The disadvantage is that Wine's private
color map is only seen while the mouse pointer is
inside a Wine window, so psychedelic flashing and
funky colors will become routine if you use the mouse
a lot.
Synchronous
To be used for debugging X11 operations.
If Wine crashes with an X11 error, then you should enable
Synchronous mode to disable X11 request caching in order
to make sure that the X11 error happens directly after
the corresponding X11 call in the log file appears.
Will slow down X11 output !
ScreenDepth
Applies only to multi-depth displays. It specifies
which of the available depths Wine should use (and
tell Windows apps about).
Display
This specifies which X11 display to use, and if
specified, will override the
DISPLAY environment variable.
PerfectGraphics
This option only determines whether fast X11 routines
or exact Wine routines will be used for certain ROP
codes in blit operations. Most users won't notice any
difference.
TextCP
To be documented...
XVideoPort
To be documented...
®istry;
PetrTomasek&email-petr-tomasek;Nov 14 1999AndreasMohr&email-andreas-mohr;Jan 25 2000Drive labels and serial numbers with wine
Written by &name-petr-tomasek; &email-petr-tomasek;
Nov 14 1999
Changes by &name-andreas-mohr; &email-andreas-mohr;
Jan 25 2000
(Extracted from wine/documentation/cdrom-labels)
Until now, your only possibility of specifying drive volume
labels and serial numbers was to set them manually in the wine
config file. By now, wine can read them directly from the
device as well. This may be useful for many Win 9x games or
for setup programs distributed on CD-ROMs that check for
volume label.
What's Supported?File SystemTypesCommentFAT systemshd, floppyreads labels and serial numbersISO9660cdromreads labels and serial numbers (not mixed-mode CDs yet !)How To Set Up?
Reading labels and serial numbers just works automagically
if you specify a Device= line in the
[Drive X] section in your ~/.wine/config.
Note that the device has to exist and must be accessible if
you do this, though.
If you don't do that, then you should give fixed
"Label" = or "Serial" =
entries in ~./wine/config, as Wine returns
these entries instead if no device is given. If they don't
exist, then Wine will return default values (label
Drive X and serial
12345678).
If you want to give a "Device" = entry
only for drive raw sector accesses,
but not for reading the volume info from the device (i.e. you want
a fixed, preconfigured label), you need
to specify "ReadVolInfo" = "0" to tell Wine
to skip the volume reading.
EXAMPLES
Here's a simple example of cdrom and floppy; labels will be
read from the device on both cdrom and floppy; serial
numbers on floppy only:
[Drive A]
"Path" = "/mnt/floppy"
"Type" = "floppy"
"Device" = "/dev/fd0"
"Filesystem" = "msdos"
[Drive R]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Device" = "/dev/hda1"
"Filesystem" = "win95"
Here's an example of overriding the CD-ROM label:
[Drive J]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "X234GCDSE"
; note that the device isn't really needed here as we have a fixed label
"Device" = "/dev/cdrom"
"Filesystem" = "msdos"
Todo / Open Issues
The cdrom label can be read only if the data track of
the disk resides in the first track and the cdrom is
iso9660.
Better checking for FAT superblock (it now checks only
one byte).
Support for labels/serial nums WRITING.
Can the label be longer than 11 chars? (iso9660 has 32
chars).
What about reading ext2 volume label? ....
DLL configurationDLL Overrides
Written by &name-ove-kaaven; &email-ove-kaaven;
(Extracted from wine/documentation/dll-overrides)
The wine config file directives [DllDefaults]
and [DllOverrides] are the subject of some confusion. The
overall purpose of most of these directives are clear enough,
though - given a choice, should Wine use its own built-in
DLLs, or should it use .DLL files found
in an existing Windows installation? This document explains
how this feature works.
DLL typesnative
A "native" DLL is a .DLL file
written for the real Microsoft Windows.
builtin
A "builtin" DLL is a Wine DLL. These can either be a
part of libwine.so, or more
recently, in a special .so file
that Wine is able to load on demand.
so
A native Unix .so file, with
calling convention conversion thunks generated on the
fly as the library is loaded. This is mostly useful
for libraries such as "glide" that have exactly the
same API on both Windows and Unix.
The [DllDefaults] sectionDefaultLoadOrder
This specifies in what order Wine should search for
available DLL types, if the DLL in question was not
found in the [DllOverrides] section.
The [DllPairs] section
At one time, there was a section called [DllPairs] in the
default configuration file, but this has been obsoleted
because the pairing information has now been embedded into
Wine itself. (The purpose of this section was merely to be
able to issue warnings if the user attempted to pair
codependent 16-bit/32-bit DLLs of different types.) If you
still have this in your ~/.wine/config or
wine.conf, you may safely delete it.
The [DllOverrides] section
This section specifies how you want specific DLLs to be
handled, in particular whether you want to use "native" DLLs
or not, if you have some from a real Windows configuration.
Because builtins do not mix seamlessly with native DLLs yet,
certain DLL dependencies may be problematic, but workarounds
exist in Wine for many popular DLL configurations. Also see
WWN's [16]Status Page to figure out how well your favorite
DLL is implemented in Wine.
It is of course also possible to override these settings by
explictly using Wine's --dll
command-line option (see the man page for details). Some
hints for choosing your optimal configuration (listed by
16/32-bit DLL pair):
krnl386, kernel32
Native versions of these will never work, so don't try. Leave
at builtin.
gdi, gdi32
Graphics Device Interface. No effort has been made at trying to
run native GDI. Leave at builtin.
user, user32
Window management and standard controls. It was
possible to use Win95's native
versions at some point (if all other DLLs that depend
on it, such as comctl32 and comdlg32, were also run
native). However, this is no longer
possible after the Address Space Separation, so leave
at builtin.
ntdll
NT kernel API. Although badly documented, the
native version of this will never
work. Leave at builtin.
w32skrnl
Win32s (for Win3.x). The native
version will probably never work. Leave at
builtin.
wow32
Win16 support library for NT. The
native version will probably never
work. Leave at builtin.
system
Win16 kernel stuff. Will never work
native. Leave at
builtin.
display
Display driver. Definitely leave at builtin.
toolhelp
Tool helper routines. This is rarely a source of problems.
Leave at builtin.
ver, version
Versioning. Seldom useful to mess with.
advapi32
Registry and security features. Trying the
native version of this may or may
not work.
commdlg, comdlg32
Common Dialogs, such as color picker, font dialog,
print dialog, open/save dialog, etc. It is safe to try
native.
commctrl, comctl32
Common Controls. This is toolbars, status bars, list controls,
the works. It is safe to try native.
shell, shell32
Shell interface (desktop, filesystem, etc). Being one of the
most undocumented pieces of Windows, you may have luck with the
native version, should you need it.
winsock, wsock32
Windows Sockets. The native version
will not work under Wine, so leave at
builtin.
icmp
ICMP routines for wsock32. As with wsock32, leave at
builtin.
mpr
The native version may not work due
to thunking issues. Leave at
builtin.
lzexpand, lz32
Lempel-Ziv decompression. Wine's
builtin version ought to work fine.
winaspi, wnaspi32
Advanced SCSI Peripheral Interface. The
native version will probably never
work. Leave at builtin.
crtdll
C Runtime library. The native
version will easily work better than Wine's on this
one.
winspool.drv
Printer spooler. You are not likely to have more luck
with the native version.
ddraw
DirectDraw/Direct3D. Since Wine does not implement the
DirectX HAL, the native version
will not work at this time.
dinput
DirectInput. Running this native
may or may not work.
dsound
DirectSound. It may be possible to run this
native, but don't count on it.
dplay/dplayx
DirectPlay. The native version
ought to work best on this, if at all.
mmsystem, winmm
Multimedia system. The native
version is not likely to work. Leave at
builtin.
msacm, msacm32
Audio Compression Manager. The
builtin version works best, if you
set msacm.drv to the same.
msvideo, msvfw32
Video for Windows. It is safe (and recommended) to try
native.
mcicda.drv
CD Audio MCI driver.
mciseq.drv
MIDI Sequencer MCI driver (.MID
playback).
mciwave.drv
Wave audio MCI driver (.WAV playback).
mciavi.drv
AVI MCI driver (.AVI video
playback). Best to use native.
mcianim.drv
Animation MCI driver.
msacm.drv
Audio Compression Manager. Set to same as msacm32.
midimap.drv
MIDI Mapper.
wprocs
This is a pseudo-DLL used by Wine for thunking
purposes. A native version of this
doesn't exist.
Missing DLLs
Written by &name-andreas-mohr; &email-andreas-mohr;
In case Wine complains about a missing DLL, you should check whether
this file is a publicly available DLL or a custom DLL belonging
to your program (by searching for its name on the internet).
If you managed to get hold of the DLL, then you should make sure
that Wine is able to find and load it.
DLLs usually get loaded according to the mechanism of the
SearchPath() function.
This function searches directories in the following order:
The directory the program was started from.
The current directory.
The Windows system directory.
The Windows directory.
The PATH variable directories.
In short: either put the required DLL into your application
directory (might be ugly), or usually put it into the Windows system
directory. Just find out its directory by having a look at the Wine
config File variable "System" (which indicates the location of the
Windows system directory) and the associated drive entry.
&fonts;
&printing;
Win95/98 Look
Written by &name-david-cuthbert; &email-david-cuthbert;
(Extracted from wine/documentation/win95look)
Win95/Win98 interface code is being introduced.
Instead of compiling Wine for Win3.1 vs. Win95 using
#define switches, the code now looks in a
special [Tweak.Layout] section of
~/.wine/config for a
"WineLook" = "Win95" or
"WineLook" = "Win98" entry.
A few new sections and a number of entries have been added to
the ~/.wine/config file -- these are for
debugging the Win95 tweaks only and may be removed in a future
release! These entries/sections are:
[Tweak.Fonts]
"System.Height" = "<point size>" # Sets the height of the system typeface
"System.Bold" = "[true|false]" # Whether the system font should be boldfaced
"System.Italic" = "[true|false]" # Whether the system font should be italicized
"System.Underline" = "[true|false]" # Whether the system font should be underlined
"System.StrikeOut" = "[true|false]" # Whether the system font should be struck out
"OEMFixed.xxx" # Same parameters for the OEM fixed typeface
"AnsiFixed.xxx" # Same parameters for the Ansi fixed typeface
"AnsiVar.xxx" # Same parameters for the Ansi variable typeface
"SystemFixed.xxx" # Same parameters for the System fixed typeface
[Tweak.Layout]
"WineLook" = "[Win31|Win95|Win98]" # Changes Wine's look and feel
Keyboard
Written by &name-ove-kaaven; &email-ove-kaaven;
(Extracted from wine/documentation/keyboard)
Wine now needs to know about your keyboard layout. This
requirement comes from a need from many apps to have the
correct scancodes available, since they read these directly,
instead of just taking the characters returned by the X
server. This means that Wine now needs to have a mapping from
X keys to the scancodes these applications expect.
On startup, Wine will try to recognize the active X layout by
seeing if it matches any of the defined tables. If it does,
everything is alright. If not, you need to define it.
To do this, open the file
dlls/x11drv/keyboard.c and take a look
at the existing tables. Make a backup copy of it, especially
if you don't use CVS.
What you really would need to do, is find out which scancode
each key needs to generate. Find it in the
main_key_scan table, which looks like
this:
static const int main_key_scan[MAIN_LEN] =
{
/* this is my (102-key) keyboard layout, sorry if it doesn't quite match yours */
0x29,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,
0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,
0x1E,0x1F,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x2B,
0x2C,0x2D,0x2E,0x2F,0x30,0x31,0x32,0x33,0x34,0x35,
0x56 /* the 102nd key (actually to the right of l-shift) */
};
Next, assign each scancode the characters imprinted on the
keycaps. This was done (sort of) for the US 101-key keyboard,
which you can find near the top in
keyboard.c. It also shows that if there
is no 102nd key, you can skip that.
However, for most international 102-key keyboards, we have
done it easy for you. The scancode layout for these already
pretty much matches the physical layout in the
main_key_scan, so all you need to do is
to go through all the keys that generate characters on your
main keyboard (except spacebar), and stuff those into an
appropriate table. The only exception is that the 102nd key,
which is usually to the left of the first key of the last line
(usually Z), must be placed on a separate
line after the last line.
For example, my Norwegian keyboard looks like this
§ ! " # ¤ % & / ( ) = ? ` Back-
| 1 2@ 3£ 4$ 5 6 7{ 8[ 9] 0} + \´ space
Tab Q W E R T Y U I O P Å ^
¨~
Enter
Caps A S D F G H J K L Ø Æ *
Lock '
Sh- > Z X C V B N M ; : _ Shift
ift < , . -
Ctrl Alt Spacebar AltGr Ctrl
Note the 102nd key, which is the <> key, to
the left of Z. The character to the right of
the main character is the character generated by
AltGr.
This keyboard is defined as follows:
static const char main_key_NO[MAIN_LEN][4] =
{
"|§","1!","2\"@","3#£","4¤$","5%","6&","7/{","8([","9)]","0=}","+?","\\´",
"qQ","wW","eE","rR","tT","yY","uU","iI","oO","pP","åÅ","¨^~",
"aA","sS","dD","fF","gG","hH","jJ","kK","lL","øØ","æÆ","'*",
"zZ","xX","cC","vV","bB","nN","mM",",;",".:","-_",
"<>"
};
Except that " and \ needs to be quoted with a backslash, and
that the 102nd key is on a separate line, it's pretty
straightforward.
After you have written such a table, you need to add it to the
main_key_tab[] layout index table. This
will look like this:
static struct {
WORD lang, ansi_codepage, oem_codepage;
const char (*key)[MAIN_LEN][4];
} main_key_tab[]={
...
...
{MAKELANGID(LANG_NORWEGIAN,SUBLANG_DEFAULT), 1252, 865, &main_key_NO},
...
After you have added your table, recompile Wine and test that
it works. If it fails to detect your table, try running
wine --debugmsg +key,+keyboard >& key.log
and look in the resulting key.log file to
find the error messages it gives for your layout.
Note that the LANG_* and
SUBLANG_* definitions are in
include/winnls.h, which you might need to
know to find out which numbers your language is assigned, and
find it in the debugmsg output. The numbers will be
(SUBLANG * 0x400 + LANG), so, for example
the combination LANG_NORWEGIAN (0x14) and
SUBLANG_DEFAULT (0x1) will be (in hex)
14 + 1*400 = 414, so since I'm Norwegian, I
could look for 0414 in the debugmsg output
to find out why my keyboard won't detect.
Once it works, submit it to the Wine project. If you use CVS,
you will just have to do
cvs -z3 diff -u dlls/x11drv/keyboard.c > layout.diff
from your main Wine directory, then submit
layout.diff to
wine-patches@winehq.com along with a brief note
of what it is.
If you don't use CVS, you need to do
diff -u the_backup_file_you_made dlls/x11drv/keyboard.c > layout.diff
and submit it as explained above.
If you did it right, it will be included in the next Wine
release, and all the troublesome applications (especially
remote-control applications) and games that use scancodes will
be happily using your keyboard layout, and you won't get those
annoying fixme messages either.
Good luck.
Using ODBC
This section describes how ODBC works within Wine and how to configure
it to do what you want (if it can do what you want).
The ODBC system within wine, as with the printing system, is designed
to hook across to the Unix system at a high level. Rather than
ensuring that all the windows code works under wine it uses a suitable
Unix ODBC provider, such as UnixODBC. Thus if you configure Wine to
use the builtin odbc32.dll that wine dll will interface to your
Unix ODBC package and let that do the work, whereas if you configure
Wine to use the native odbc32.dll it will try to use the native
ODBC32 drivers etc.
Using a Unix ODBC system with Wine
The first step in using a Unix ODBC system with Wine is, of course,
to get the Unix ODBC system working itself. This may involve
downloading code or rpms etc. There are several Unix ODBC systems
available; the one the author is used to is unixODBC (with the
IBM DB2 driver). Typically such systems will include a tool, such
as isql, which will allow you to access the data from the command
line so that you can check that the system is working.
The next step is to hook the Unix ODBC library to the wine builtin
odbc32 dll. The builtin odbc32 (currently) looks to the
environmental variable LIB_ODBC_DRIVER_MANAGER
for the name of the odbc library. For example in the author's
.bashrc file is the line:
export LIB_ODBC_DRIVER_MANAGER=/usr/lib/libodbc.so.1.0.0
If that environmental variable is not set then it looks for a
library called libodbc.so and so you can add a symbolic link to
equate that to your own library. For example as root you could
run the commands:
ln -s libodbc.so.1.0.0 /usr/lib/libodbc.so
/sbin/ldconfig
The last step in configuring this is to ensure that Wine is set up
to run the builtin version of odbc32.dll, by modifying the DLL
configuration. This builtin dll merely acts as a stub between the
calling code and the Unix ODBC library.
If you have any problems then you can use the debugmsg channel
odbc32 to trace what is happening. One word of warning. Some
programs actually cheat a little and bypass the odbc library. For
example the Crystal Reports engine goes to the registry to check on
the DSN. The fix for this is documented at unixODBC's site where
there is a section on using unixODBC with Wine.
Using Windows ODBC drivers
Does anyone actually have any experience of this and anything to
add?