/* * Copyright 1997-2000 Marcus Meissner * Copyright 1998-2000 Lionel Ulmer * Copyright 2000-2001 TransGaming Technologies Inc. * Copyright 2006 Stefan Dösinger * Copyright 2008 Denver Gingerich * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA */ #include "config.h" #include "wine/port.h" #include #include #include #include #define COBJMACROS #define NONAMELESSUNION #include "windef.h" #include "winbase.h" #include "winerror.h" #include "wingdi.h" #include "wine/exception.h" #include "ddraw.h" #include "d3d.h" #include "ddraw_private.h" #include "wine/debug.h" WINE_DEFAULT_DEBUG_CHANNEL(ddraw); static BOOL IDirectDrawImpl_DDSD_Match(const DDSURFACEDESC2* requested, const DDSURFACEDESC2* provided); static HRESULT IDirectDrawImpl_AttachD3DDevice(IDirectDrawImpl *This, IDirectDrawSurfaceImpl *primary); static HRESULT IDirectDrawImpl_CreateNewSurface(IDirectDrawImpl *This, DDSURFACEDESC2 *pDDSD, IDirectDrawSurfaceImpl **ppSurf, UINT level); static HRESULT IDirectDrawImpl_CreateGDISwapChain(IDirectDrawImpl *This, IDirectDrawSurfaceImpl *primary); /* Device identifier. Don't relay it to WineD3D */ static const DDDEVICEIDENTIFIER2 deviceidentifier = { "display", "DirectDraw HAL", { { 0x00010001, 0x00010001 } }, 0, 0, 0, 0, /* a8373c10-7ac4-4deb-849a-009844d08b2d */ {0xa8373c10,0x7ac4,0x4deb, {0x84,0x9a,0x00,0x98,0x44,0xd0,0x8b,0x2d}}, 0 }; /***************************************************************************** * IUnknown Methods *****************************************************************************/ /***************************************************************************** * IDirectDraw7::QueryInterface * * Queries different interfaces of the DirectDraw object. It can return * IDirectDraw interfaces in version 1, 2, 4 and 7, and IDirect3D interfaces * in version 1, 2, 3 and 7. An IDirect3DDevice can be created with this * method. * The returned interface is AddRef()-ed before it's returned * * Used for version 1, 2, 4 and 7 * * Params: * refiid: Interface ID asked for * obj: Used to return the interface pointer * * Returns: * S_OK if an interface was found * E_NOINTERFACE if the requested interface wasn't found * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_QueryInterface(IDirectDraw7 *iface, REFIID refiid, void **obj) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)->(%s,%p)\n", This, debugstr_guid(refiid), obj); /* Can change surface impl type */ EnterCriticalSection(&ddraw_cs); /* According to COM docs, if the QueryInterface fails, obj should be set to NULL */ *obj = NULL; if(!refiid) { LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } /* Check DirectDraw Interfaces */ if ( IsEqualGUID( &IID_IUnknown, refiid ) || IsEqualGUID( &IID_IDirectDraw7, refiid ) ) { *obj = This; TRACE("(%p) Returning IDirectDraw7 interface at %p\n", This, *obj); } else if ( IsEqualGUID( &IID_IDirectDraw4, refiid ) ) { *obj = &This->IDirectDraw4_vtbl; TRACE("(%p) Returning IDirectDraw4 interface at %p\n", This, *obj); } else if ( IsEqualGUID( &IID_IDirectDraw3, refiid ) ) { /* This Interface exists in ddrawex.dll, it is implemented in a wrapper */ WARN("IDirectDraw3 is not valid in ddraw.dll\n"); *obj = NULL; LeaveCriticalSection(&ddraw_cs); return E_NOINTERFACE; } else if ( IsEqualGUID( &IID_IDirectDraw2, refiid ) ) { *obj = &This->IDirectDraw2_vtbl; TRACE("(%p) Returning IDirectDraw2 interface at %p\n", This, *obj); } else if ( IsEqualGUID( &IID_IDirectDraw, refiid ) ) { *obj = &This->IDirectDraw_vtbl; TRACE("(%p) Returning IDirectDraw interface at %p\n", This, *obj); } /* Direct3D * The refcount unit test revealed that an IDirect3D7 interface can only be queried * from a DirectDraw object that was created as an IDirectDraw7 interface. No idea * who had this idea and why. The older interfaces can query and IDirect3D version * because they are all created as IDirectDraw(1). This isn't really crucial behavior, * and messy to implement with the common creation function, so it has been left out here. */ else if ( IsEqualGUID( &IID_IDirect3D , refiid ) || IsEqualGUID( &IID_IDirect3D2 , refiid ) || IsEqualGUID( &IID_IDirect3D3 , refiid ) || IsEqualGUID( &IID_IDirect3D7 , refiid ) ) { /* Check the surface implementation */ if(This->ImplType == SURFACE_UNKNOWN) { /* Apps may create the IDirect3D Interface before the primary surface. * set the surface implementation */ This->ImplType = SURFACE_OPENGL; TRACE("(%p) Choosing OpenGL surfaces because a Direct3D interface was requested\n", This); } else if(This->ImplType != SURFACE_OPENGL && DefaultSurfaceType == SURFACE_UNKNOWN) { ERR("(%p) The App is requesting a D3D device, but a non-OpenGL surface type was choosen. Prepare for trouble!\n", This); ERR(" (%p) You may want to contact wine-devel for help\n", This); /* Should I assert(0) here??? */ } else if(This->ImplType != SURFACE_OPENGL) { WARN("The app requests a Direct3D interface, but non-opengl surfaces where set in winecfg\n"); /* Do not abort here, only reject 3D Device creation */ } if ( IsEqualGUID( &IID_IDirect3D , refiid ) ) { This->d3dversion = 1; *obj = &This->IDirect3D_vtbl; TRACE(" returning Direct3D interface at %p.\n", *obj); } else if ( IsEqualGUID( &IID_IDirect3D2 , refiid ) ) { This->d3dversion = 2; *obj = &This->IDirect3D2_vtbl; TRACE(" returning Direct3D2 interface at %p.\n", *obj); } else if ( IsEqualGUID( &IID_IDirect3D3 , refiid ) ) { This->d3dversion = 3; *obj = &This->IDirect3D3_vtbl; TRACE(" returning Direct3D3 interface at %p.\n", *obj); } else if(IsEqualGUID( &IID_IDirect3D7 , refiid )) { This->d3dversion = 7; *obj = &This->IDirect3D7_vtbl; TRACE(" returning Direct3D7 interface at %p.\n", *obj); } } else if (IsEqualGUID(refiid, &IID_IWineD3DDeviceParent)) { *obj = &This->device_parent_vtbl; } /* Unknown interface */ else { ERR("(%p)->(%s, %p): No interface found\n", This, debugstr_guid(refiid), obj); LeaveCriticalSection(&ddraw_cs); return E_NOINTERFACE; } IUnknown_AddRef( (IUnknown *) *obj ); LeaveCriticalSection(&ddraw_cs); return S_OK; } /***************************************************************************** * IDirectDraw7::AddRef * * Increases the interfaces refcount, basically * * DDraw refcounting is a bit tricky. The different DirectDraw interface * versions have individual refcounts, but the IDirect3D interfaces do not. * All interfaces are from one object, that means calling QueryInterface on an * IDirectDraw7 interface for an IDirectDraw4 interface does not create a new * IDirectDrawImpl object. * * That means all AddRef and Release implementations of IDirectDrawX work * with their own counter, and IDirect3DX::AddRef thunk to IDirectDraw (1), * except of IDirect3D7 which thunks to IDirectDraw7 * * Returns: The new refcount * *****************************************************************************/ static ULONG WINAPI IDirectDrawImpl_AddRef(IDirectDraw7 *iface) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; ULONG ref = InterlockedIncrement(&This->ref7); TRACE("(%p) : incrementing IDirectDraw7 refcount from %u.\n", This, ref -1); if(ref == 1) InterlockedIncrement(&This->numIfaces); return ref; } /***************************************************************************** * IDirectDrawImpl_Destroy * * Destroys a ddraw object if all refcounts are 0. This is to share code * between the IDirectDrawX::Release functions * * Params: * This: DirectDraw object to destroy * *****************************************************************************/ void IDirectDrawImpl_Destroy(IDirectDrawImpl *This) { /* Clear the cooplevel to restore window and display mode */ IDirectDraw7_SetCooperativeLevel((IDirectDraw7 *)This, NULL, DDSCL_NORMAL); /* Destroy the device window if we created one */ if(This->devicewindow != 0) { TRACE(" (%p) Destroying the device window %p\n", This, This->devicewindow); DestroyWindow(This->devicewindow); This->devicewindow = 0; } /* Unregister the window class */ UnregisterClassA(This->classname, 0); EnterCriticalSection(&ddraw_cs); list_remove(&This->ddraw_list_entry); LeaveCriticalSection(&ddraw_cs); /* Release the attached WineD3D stuff */ IWineD3DDevice_Release(This->wineD3DDevice); IWineD3D_Release(This->wineD3D); /* Now free the object */ HeapFree(GetProcessHeap(), 0, This); } /***************************************************************************** * IDirectDraw7::Release * * Decreases the refcount. If the refcount falls to 0, the object is destroyed * * Returns: The new refcount *****************************************************************************/ static ULONG WINAPI IDirectDrawImpl_Release(IDirectDraw7 *iface) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; ULONG ref = InterlockedDecrement(&This->ref7); TRACE("(%p)->() decrementing IDirectDraw7 refcount from %u.\n", This, ref +1); if(ref == 0) { ULONG ifacecount = InterlockedDecrement(&This->numIfaces); if(ifacecount == 0) IDirectDrawImpl_Destroy(This); } return ref; } /***************************************************************************** * IDirectDraw methods *****************************************************************************/ /***************************************************************************** * IDirectDraw7::SetCooperativeLevel * * Sets the cooperative level for the DirectDraw object, and the window * assigned to it. The cooperative level determines the general behavior * of the DirectDraw application * * Warning: This is quite tricky, as it's not really documented which * cooperative levels can be combined with each other. If a game fails * after this function, try to check the cooperative levels passed on * Windows, and if it returns something different. * * If you think that this function caused the failure because it writes a * fixme, be sure to run again with a +ddraw trace. * * What is known about cooperative levels (See the ddraw modes test): * DDSCL_EXCLUSIVE and DDSCL_FULLSCREEN must be used with each other * DDSCL_NORMAL is not compatible with DDSCL_EXCLUSIVE or DDSCL_FULLSCREEN * DDSCL_SETFOCUSWINDOW can be passed only in DDSCL_NORMAL mode, but after that * DDSCL_FULLSCREEN can be activated * DDSCL_SETFOCUSWINDOW may only be used with DDSCL_NOWINDOWCHANGES * * Handled flags: DDSCL_NORMAL, DDSCL_FULLSCREEN, DDSCL_EXCLUSIVE, * DDSCL_SETFOCUSWINDOW (partially), * DDSCL_MULTITHREADED (work in progress) * * Unhandled flags, which should be implemented * DDSCL_SETDEVICEWINDOW: Sets a window specially used for rendering (I don't * expect any difference to a normal window for wine) * DDSCL_CREATEDEVICEWINDOW: Tells ddraw to create its own window for * rendering (Possible test case: Half-life) * * Unsure about these: DDSCL_FPUSETUP DDSCL_FPURESERVE * * These don't seem very important for wine: * DDSCL_ALLOWREBOOT, DDSCL_NOWINDOWCHANGES, DDSCL_ALLOWMODEX * * Returns: * DD_OK if the cooperative level was set successfully * DDERR_INVALIDPARAMS if the passed cooperative level combination is invalid * DDERR_HWNDALREADYSET if DDSCL_SETFOCUSWINDOW is passed in exclusive mode * (Probably others too, have to investigate) * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_SetCooperativeLevel(IDirectDraw7 *iface, HWND hwnd, DWORD cooplevel) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; HWND window; TRACE("(%p)->(%p,%08x)\n",This,hwnd,cooplevel); DDRAW_dump_cooperativelevel(cooplevel); EnterCriticalSection(&ddraw_cs); /* Get the old window */ window = This->dest_window; /* Tests suggest that we need one of them: */ if(!(cooplevel & (DDSCL_SETFOCUSWINDOW | DDSCL_NORMAL | DDSCL_EXCLUSIVE ))) { TRACE("Incorrect cooplevel flags, returning DDERR_INVALIDPARAMS\n"); LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } /* Handle those levels first which set various hwnds */ if(cooplevel & DDSCL_SETFOCUSWINDOW) { /* This isn't compatible with a lot of flags */ if(cooplevel & ( DDSCL_MULTITHREADED | DDSCL_FPUSETUP | DDSCL_FPUPRESERVE | DDSCL_ALLOWREBOOT | DDSCL_ALLOWMODEX | DDSCL_SETDEVICEWINDOW | DDSCL_NORMAL | DDSCL_EXCLUSIVE | DDSCL_FULLSCREEN ) ) { TRACE("Called with incompatible flags, returning DDERR_INVALIDPARAMS\n"); LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } else if( (This->cooperative_level & DDSCL_FULLSCREEN) && window) { TRACE("Setting DDSCL_SETFOCUSWINDOW with an already set window, returning DDERR_HWNDALREADYSET\n"); LeaveCriticalSection(&ddraw_cs); return DDERR_HWNDALREADYSET; } This->focuswindow = hwnd; /* Won't use the hwnd param for anything else */ hwnd = NULL; /* Use the focus window for drawing too */ This->dest_window = This->focuswindow; /* Destroy the device window, if we have one */ if(This->devicewindow) { DestroyWindow(This->devicewindow); This->devicewindow = NULL; } } /* DDSCL_NORMAL or DDSCL_FULLSCREEN | DDSCL_EXCLUSIVE */ if(cooplevel & DDSCL_NORMAL) { /* Can't coexist with fullscreen or exclusive */ if(cooplevel & (DDSCL_FULLSCREEN | DDSCL_EXCLUSIVE) ) { TRACE("(%p) DDSCL_NORMAL is not compative with DDSCL_FULLSCREEN or DDSCL_EXCLUSIVE\n", This); LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } /* Switching from fullscreen? */ if(This->cooperative_level & DDSCL_FULLSCREEN) { /* Restore the display mode */ IDirectDraw7_RestoreDisplayMode(iface); This->cooperative_level &= ~DDSCL_FULLSCREEN; This->cooperative_level &= ~DDSCL_EXCLUSIVE; This->cooperative_level &= ~DDSCL_ALLOWMODEX; } /* Don't override focus windows or private device windows */ if( hwnd && !(This->focuswindow) && !(This->devicewindow) && (hwnd != window) ) { This->dest_window = hwnd; } } else if(cooplevel & DDSCL_FULLSCREEN) { /* Needs DDSCL_EXCLUSIVE */ if(!(cooplevel & DDSCL_EXCLUSIVE) ) { TRACE("(%p) DDSCL_FULLSCREEN needs DDSCL_EXCLUSIVE\n", This); LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } /* Need a HWND if(hwnd == 0) { TRACE("(%p) DDSCL_FULLSCREEN needs a HWND\n", This); return DDERR_INVALIDPARAMS; } */ This->cooperative_level &= ~DDSCL_NORMAL; /* Don't override focus windows or private device windows */ if( hwnd && !(This->focuswindow) && !(This->devicewindow) && (hwnd != window) ) { This->dest_window = hwnd; } } else if(cooplevel & DDSCL_EXCLUSIVE) { TRACE("(%p) DDSCL_EXCLUSIVE needs DDSCL_FULLSCREEN\n", This); LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } if(cooplevel & DDSCL_CREATEDEVICEWINDOW) { /* Don't create a device window if a focus window is set */ if( !(This->focuswindow) ) { HWND devicewindow = CreateWindowExA(0, This->classname, "DDraw device window", WS_POPUP, 0, 0, GetSystemMetrics(SM_CXSCREEN), GetSystemMetrics(SM_CYSCREEN), NULL, NULL, GetModuleHandleA(0), NULL); ShowWindow(devicewindow, SW_SHOW); /* Just to be sure */ TRACE("(%p) Created a DDraw device window. HWND=%p\n", This, devicewindow); This->devicewindow = devicewindow; This->dest_window = devicewindow; } } if(cooplevel & DDSCL_MULTITHREADED && !(This->cooperative_level & DDSCL_MULTITHREADED)) { /* Enable thread safety in wined3d */ IWineD3DDevice_SetMultithreaded(This->wineD3DDevice); } /* Unhandled flags */ if(cooplevel & DDSCL_ALLOWREBOOT) WARN("(%p) Unhandled flag DDSCL_ALLOWREBOOT, harmless\n", This); if(cooplevel & DDSCL_ALLOWMODEX) WARN("(%p) Unhandled flag DDSCL_ALLOWMODEX, harmless\n", This); if(cooplevel & DDSCL_FPUSETUP) WARN("(%p) Unhandled flag DDSCL_FPUSETUP, harmless\n", This); /* Store the cooperative_level */ This->cooperative_level |= cooplevel; TRACE("SetCooperativeLevel retuning DD_OK\n"); LeaveCriticalSection(&ddraw_cs); return DD_OK; } /***************************************************************************** * * Helper function for SetDisplayMode and RestoreDisplayMode * * Implements DirectDraw's SetDisplayMode, but ignores the value of * ForceRefreshRate, since it is already handled by * IDirectDrawImpl_SetDisplayMode. RestoreDisplayMode can use this function * without worrying that ForceRefreshRate will override the refresh rate. For * argument and return value documentation, see * IDirectDrawImpl_SetDisplayMode. * *****************************************************************************/ static HRESULT IDirectDrawImpl_SetDisplayModeNoOverride(IDirectDraw7 *iface, DWORD Width, DWORD Height, DWORD BPP, DWORD RefreshRate, DWORD Flags) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; WINED3DDISPLAYMODE Mode; HRESULT hr; TRACE("(%p)->(%d,%d,%d,%d,%x): Relay!\n", This, Width, Height, BPP, RefreshRate, Flags); EnterCriticalSection(&ddraw_cs); if( !Width || !Height ) { ERR("Width=%d, Height=%d, what to do?\n", Width, Height); /* It looks like Need for Speed Porsche Unleashed expects DD_OK here */ LeaveCriticalSection(&ddraw_cs); return DD_OK; } /* Check the exclusive mode if(!(This->cooperative_level & DDSCL_EXCLUSIVE)) return DDERR_NOEXCLUSIVEMODE; * This is WRONG. Don't know if the SDK is completely * wrong and if there are any conditions when DDERR_NOEXCLUSIVE * is returned, but Half-Life 1.1.1.1 (Steam version) * depends on this */ Mode.Width = Width; Mode.Height = Height; Mode.RefreshRate = RefreshRate; switch(BPP) { case 8: Mode.Format = WINED3DFMT_P8; break; case 15: Mode.Format = WINED3DFMT_X1R5G5B5; break; case 16: Mode.Format = WINED3DFMT_R5G6B5; break; case 24: Mode.Format = WINED3DFMT_R8G8B8; break; case 32: Mode.Format = WINED3DFMT_X8R8G8B8; break; } /* TODO: The possible return values from msdn suggest that * the screen mode can't be changed if a surface is locked * or some drawing is in progress */ /* TODO: Lose the primary surface */ hr = IWineD3DDevice_SetDisplayMode(This->wineD3DDevice, 0, /* First swapchain */ &Mode); LeaveCriticalSection(&ddraw_cs); switch(hr) { case WINED3DERR_NOTAVAILABLE: return DDERR_UNSUPPORTED; default: return hr; } } /***************************************************************************** * IDirectDraw7::SetDisplayMode * * Sets the display screen resolution, color depth and refresh frequency * when in fullscreen mode (in theory). * Possible return values listed in the SDK suggest that this method fails * when not in fullscreen mode, but this is wrong. Windows 2000 happily sets * the display mode in DDSCL_NORMAL mode without an hwnd specified. * It seems to be valid to pass 0 for With and Height, this has to be tested * It could mean that the current video mode should be left as-is. (But why * call it then?) * * Params: * Height, Width: Screen dimension * BPP: Color depth in Bits per pixel * Refreshrate: Screen refresh rate * Flags: Other stuff * * Returns * DD_OK on success * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_SetDisplayMode(IDirectDraw7 *iface, DWORD Width, DWORD Height, DWORD BPP, DWORD RefreshRate, DWORD Flags) { if (force_refresh_rate != 0) { TRACE("ForceRefreshRate overriding passed-in refresh rate (%d Hz) to %d Hz\n", RefreshRate, force_refresh_rate); RefreshRate = force_refresh_rate; } return IDirectDrawImpl_SetDisplayModeNoOverride(iface, Width, Height, BPP, RefreshRate, Flags); } /***************************************************************************** * IDirectDraw7::RestoreDisplayMode * * Restores the display mode to what it was at creation time. Basically. * * A problem arises when there are 2 DirectDraw objects using the same hwnd: * -> DD_1 finds the screen at 1400x1050x32 when created, sets it to 640x480x16 * -> DD_2 is created, finds the screen at 640x480x16, sets it to 1024x768x32 * -> DD_1 is released. The screen should be left at 1024x768x32. * -> DD_2 is released. The screen should be set to 1400x1050x32 * This case is unhandled right now, but Empire Earth does it this way. * (But perhaps there is something in SetCooperativeLevel to prevent this) * * The msdn says that this method resets the display mode to what it was before * SetDisplayMode was called. What if SetDisplayModes is called 2 times?? * * Returns * DD_OK on success * DDERR_NOEXCLUSIVE mode if the device isn't in fullscreen mode * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_RestoreDisplayMode(IDirectDraw7 *iface) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)\n", This); return IDirectDrawImpl_SetDisplayModeNoOverride(iface, This->orig_width, This->orig_height, This->orig_bpp, 0, 0); } /***************************************************************************** * IDirectDraw7::GetCaps * * Returns the drives capabilities * * Used for version 1, 2, 4 and 7 * * Params: * DriverCaps: Structure to write the Hardware accelerated caps to * HelCaps: Structure to write the emulation caps to * * Returns * This implementation returns DD_OK only * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetCaps(IDirectDraw7 *iface, DDCAPS *DriverCaps, DDCAPS *HELCaps) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; DDCAPS caps; WINED3DCAPS winecaps; HRESULT hr; DDSCAPS2 ddscaps = {0, 0, 0, 0}; TRACE("(%p)->(%p,%p)\n", This, DriverCaps, HELCaps); /* One structure must be != NULL */ if( (!DriverCaps) && (!HELCaps) ) { ERR("(%p) Invalid params to IDirectDrawImpl_GetCaps\n", This); return DDERR_INVALIDPARAMS; } memset(&caps, 0, sizeof(caps)); memset(&winecaps, 0, sizeof(winecaps)); caps.dwSize = sizeof(caps); EnterCriticalSection(&ddraw_cs); hr = IWineD3DDevice_GetDeviceCaps(This->wineD3DDevice, &winecaps); if(FAILED(hr)) { WARN("IWineD3DDevice::GetDeviceCaps failed\n"); LeaveCriticalSection(&ddraw_cs); return hr; } hr = IDirectDraw7_GetAvailableVidMem(iface, &ddscaps, &caps.dwVidMemTotal, &caps.dwVidMemFree); LeaveCriticalSection(&ddraw_cs); if(FAILED(hr)) { WARN("IDirectDraw7::GetAvailableVidMem failed\n"); return hr; } caps.dwCaps = winecaps.DirectDrawCaps.Caps; caps.dwCaps2 = winecaps.DirectDrawCaps.Caps2; caps.dwCKeyCaps = winecaps.DirectDrawCaps.CKeyCaps; caps.dwFXCaps = winecaps.DirectDrawCaps.FXCaps; caps.dwPalCaps = winecaps.DirectDrawCaps.PalCaps; caps.ddsCaps.dwCaps = winecaps.DirectDrawCaps.ddsCaps; caps.dwSVBCaps = winecaps.DirectDrawCaps.SVBCaps; caps.dwSVBCKeyCaps = winecaps.DirectDrawCaps.SVBCKeyCaps; caps.dwSVBFXCaps = winecaps.DirectDrawCaps.SVBFXCaps; caps.dwVSBCaps = winecaps.DirectDrawCaps.VSBCaps; caps.dwVSBCKeyCaps = winecaps.DirectDrawCaps.VSBCKeyCaps; caps.dwVSBFXCaps = winecaps.DirectDrawCaps.VSBFXCaps; caps.dwSSBCaps = winecaps.DirectDrawCaps.SSBCaps; caps.dwSSBCKeyCaps = winecaps.DirectDrawCaps.SSBCKeyCaps; caps.dwSSBFXCaps = winecaps.DirectDrawCaps.SSBFXCaps; /* Even if WineD3D supports 3D rendering, remove the cap if ddraw is configured * not to use it */ if(DefaultSurfaceType == SURFACE_GDI) { caps.dwCaps &= ~DDCAPS_3D; caps.ddsCaps.dwCaps &= ~(DDSCAPS_3DDEVICE | DDSCAPS_MIPMAP | DDSCAPS_TEXTURE | DDSCAPS_ZBUFFER); } if(winecaps.DirectDrawCaps.StrideAlign != 0) { caps.dwCaps |= DDCAPS_ALIGNSTRIDE; caps.dwAlignStrideAlign = winecaps.DirectDrawCaps.StrideAlign; } if(DriverCaps) { DD_STRUCT_COPY_BYSIZE(DriverCaps, &caps); if (TRACE_ON(ddraw)) { TRACE("Driver Caps :\n"); DDRAW_dump_DDCAPS(DriverCaps); } } if(HELCaps) { DD_STRUCT_COPY_BYSIZE(HELCaps, &caps); if (TRACE_ON(ddraw)) { TRACE("HEL Caps :\n"); DDRAW_dump_DDCAPS(HELCaps); } } return DD_OK; } /***************************************************************************** * IDirectDraw7::Compact * * No idea what it does, MSDN says it's not implemented. * * Returns * DD_OK, but this is unchecked * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_Compact(IDirectDraw7 *iface) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)\n", This); return DD_OK; } /***************************************************************************** * IDirectDraw7::GetDisplayMode * * Returns information about the current display mode * * Exists in Version 1, 2, 4 and 7 * * Params: * DDSD: Address of a surface description structure to write the info to * * Returns * DD_OK * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetDisplayMode(IDirectDraw7 *iface, DDSURFACEDESC2 *DDSD) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; HRESULT hr; WINED3DDISPLAYMODE Mode; DWORD Size; TRACE("(%p)->(%p): Relay\n", This, DDSD); EnterCriticalSection(&ddraw_cs); /* This seems sane */ if(!DDSD) { LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } /* The necessary members of LPDDSURFACEDESC and LPDDSURFACEDESC2 are equal, * so one method can be used for all versions (Hopefully) */ hr = IWineD3DDevice_GetDisplayMode(This->wineD3DDevice, 0 /* swapchain 0 */, &Mode); if( hr != D3D_OK ) { ERR(" (%p) IWineD3DDevice::GetDisplayMode returned %08x\n", This, hr); LeaveCriticalSection(&ddraw_cs); return hr; } Size = DDSD->dwSize; memset(DDSD, 0, Size); DDSD->dwSize = Size; DDSD->dwFlags |= DDSD_HEIGHT | DDSD_WIDTH | DDSD_PIXELFORMAT | DDSD_PITCH | DDSD_REFRESHRATE; DDSD->dwWidth = Mode.Width; DDSD->dwHeight = Mode.Height; DDSD->u2.dwRefreshRate = 60; DDSD->ddsCaps.dwCaps = 0; DDSD->u4.ddpfPixelFormat.dwSize = sizeof(DDSD->u4.ddpfPixelFormat); PixelFormat_WineD3DtoDD(&DDSD->u4.ddpfPixelFormat, Mode.Format); DDSD->u1.lPitch = Mode.Width * DDSD->u4.ddpfPixelFormat.u1.dwRGBBitCount / 8; if(TRACE_ON(ddraw)) { TRACE("Returning surface desc :\n"); DDRAW_dump_surface_desc(DDSD); } LeaveCriticalSection(&ddraw_cs); return DD_OK; } /***************************************************************************** * IDirectDraw7::GetFourCCCodes * * Returns an array of supported FourCC codes. * * Exists in Version 1, 2, 4 and 7 * * Params: * NumCodes: Contains the number of Codes that Codes can carry. Returns the number * of enumerated codes * Codes: Pointer to an array of DWORDs where the supported codes are written * to * * Returns * Always returns DD_OK, as it's a stub for now * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetFourCCCodes(IDirectDraw7 *iface, DWORD *NumCodes, DWORD *Codes) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; WINED3DFORMAT formats[] = { WINED3DFMT_YUY2, WINED3DFMT_UYVY, WINED3DFMT_YV12, WINED3DFMT_DXT1, WINED3DFMT_DXT2, WINED3DFMT_DXT3, WINED3DFMT_DXT4, WINED3DFMT_DXT5, WINED3DFMT_ATI2N, WINED3DFMT_NVHU, WINED3DFMT_NVHS }; DWORD count = 0, i, outsize; HRESULT hr; WINED3DDISPLAYMODE d3ddm; WINED3DSURFTYPE type = This->ImplType; TRACE("(%p)->(%p, %p)\n", This, NumCodes, Codes); IWineD3DDevice_GetDisplayMode(This->wineD3DDevice, 0 /* swapchain 0 */, &d3ddm); outsize = NumCodes && Codes ? *NumCodes : 0; if(type == SURFACE_UNKNOWN) type = SURFACE_GDI; for(i = 0; i < (sizeof(formats) / sizeof(formats[0])); i++) { hr = IWineD3D_CheckDeviceFormat(This->wineD3D, WINED3DADAPTER_DEFAULT, WINED3DDEVTYPE_HAL, d3ddm.Format /* AdapterFormat */, 0 /* usage */, WINED3DRTYPE_SURFACE, formats[i], type); if(SUCCEEDED(hr)) { if(count < outsize) { Codes[count] = formats[i]; } count++; } } if(NumCodes) { TRACE("Returning %u FourCC codes\n", count); *NumCodes = count; } return DD_OK; } /***************************************************************************** * IDirectDraw7::GetMonitorFrequency * * Returns the monitor's frequency * * Exists in Version 1, 2, 4 and 7 * * Params: * Freq: Pointer to a DWORD to write the frequency to * * Returns * Always returns DD_OK * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetMonitorFrequency(IDirectDraw7 *iface, DWORD *Freq) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)->(%p)\n", This, Freq); /* Ideally this should be in WineD3D, as it concerns the screen setup, * but for now this should make the games happy */ *Freq = 60; return DD_OK; } /***************************************************************************** * IDirectDraw7::GetVerticalBlankStatus * * Returns the Vertical blank status of the monitor. This should be in WineD3D * too basically, but as it's a semi stub, I didn't create a function there * * Params: * status: Pointer to a BOOL to be filled with the vertical blank status * * Returns * DD_OK on success * DDERR_INVALIDPARAMS if status is NULL * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetVerticalBlankStatus(IDirectDraw7 *iface, BOOL *status) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)->(%p)\n", This, status); /* This looks sane, the MSDN suggests it too */ EnterCriticalSection(&ddraw_cs); if(!status) { LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } *status = This->fake_vblank; This->fake_vblank = !This->fake_vblank; LeaveCriticalSection(&ddraw_cs); return DD_OK; } /***************************************************************************** * IDirectDraw7::GetAvailableVidMem * * Returns the total and free video memory * * Params: * Caps: Specifies the memory type asked for * total: Pointer to a DWORD to be filled with the total memory * free: Pointer to a DWORD to be filled with the free memory * * Returns * DD_OK on success * DDERR_INVALIDPARAMS of free and total are NULL * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetAvailableVidMem(IDirectDraw7 *iface, DDSCAPS2 *Caps, DWORD *total, DWORD *free) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)->(%p, %p, %p)\n", This, Caps, total, free); if(TRACE_ON(ddraw)) { TRACE("(%p) Asked for memory with description: ", This); DDRAW_dump_DDSCAPS2(Caps); } EnterCriticalSection(&ddraw_cs); /* Todo: System memory vs local video memory vs non-local video memory * The MSDN also mentions differences between texture memory and other * resources, but that's not important */ if( (!total) && (!free) ) { LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } if(total) *total = This->total_vidmem; if(free) *free = IWineD3DDevice_GetAvailableTextureMem(This->wineD3DDevice); LeaveCriticalSection(&ddraw_cs); return DD_OK; } /***************************************************************************** * IDirectDraw7::Initialize * * Initializes a DirectDraw interface. * * Params: * GUID: Interface identifier. Well, don't know what this is really good * for * * Returns * Returns DD_OK on the first call, * DDERR_ALREADYINITIALIZED on repeated calls * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_Initialize(IDirectDraw7 *iface, GUID *Guid) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)->(%s): No-op\n", This, debugstr_guid(Guid)); if(This->initialized) { return DDERR_ALREADYINITIALIZED; } else { return DD_OK; } } /***************************************************************************** * IDirectDraw7::FlipToGDISurface * * "Makes the surface that the GDI writes to the primary surface" * Looks like some windows specific thing we don't have to care about. * According to MSDN it permits GDI dialog boxes in FULLSCREEN mode. Good to * show error boxes ;) * Well, just return DD_OK. * * Returns: * Always returns DD_OK * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_FlipToGDISurface(IDirectDraw7 *iface) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)\n", This); return DD_OK; } /***************************************************************************** * IDirectDraw7::WaitForVerticalBlank * * This method allows applications to get in sync with the vertical blank * interval. * The wormhole demo in the DirectX 7 sdk uses this call, and it doesn't * redraw the screen, most likely because of this stub * * Parameters: * Flags: one of DDWAITVB_BLOCKBEGIN, DDWAITVB_BLOCKBEGINEVENT * or DDWAITVB_BLOCKEND * h: Not used, according to MSDN * * Returns: * Always returns DD_OK * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_WaitForVerticalBlank(IDirectDraw7 *iface, DWORD Flags, HANDLE h) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; static BOOL hide = FALSE; /* This function is called often, so print the fixme only once */ if(!hide) { FIXME("(%p)->(%x,%p): Stub\n", This, Flags, h); hide = TRUE; } /* MSDN says DDWAITVB_BLOCKBEGINEVENT is not supported */ if(Flags & DDWAITVB_BLOCKBEGINEVENT) return DDERR_UNSUPPORTED; /* unchecked */ return DD_OK; } /***************************************************************************** * IDirectDraw7::GetScanLine * * Returns the scan line that is being drawn on the monitor * * Parameters: * Scanline: Address to write the scan line value to * * Returns: * Always returns DD_OK * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetScanLine(IDirectDraw7 *iface, DWORD *Scanline) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; static BOOL hide = FALSE; WINED3DDISPLAYMODE Mode; /* This function is called often, so print the fixme only once */ EnterCriticalSection(&ddraw_cs); if(!hide) { FIXME("(%p)->(%p): Semi-Stub\n", This, Scanline); hide = TRUE; } IWineD3DDevice_GetDisplayMode(This->wineD3DDevice, 0, &Mode); /* Fake the line sweeping of the monitor */ /* FIXME: We should synchronize with a source to keep the refresh rate */ *Scanline = This->cur_scanline++; /* Assume 20 scan lines in the vertical blank */ if (This->cur_scanline >= Mode.Height + 20) This->cur_scanline = 0; LeaveCriticalSection(&ddraw_cs); return DD_OK; } /***************************************************************************** * IDirectDraw7::TestCooperativeLevel * * Informs the application about the state of the video adapter, depending * on the cooperative level * * Returns: * DD_OK if the device is in a sane state * DDERR_NOEXCLUSIVEMODE or DDERR_EXCLUSIVEMODEALREADYSET * if the state is not correct(See below) * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_TestCooperativeLevel(IDirectDraw7 *iface) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; HRESULT hr; TRACE("(%p)\n", This); EnterCriticalSection(&ddraw_cs); /* Description from MSDN: * For fullscreen apps return DDERR_NOEXCLUSIVEMODE if the user switched * away from the app with e.g. alt-tab. Windowed apps receive * DDERR_EXCLUSIVEMODEALREADYSET if another application created a * DirectDraw object in exclusive mode. DDERR_WRONGMODE is returned, * when the video mode has changed */ hr = IWineD3DDevice_TestCooperativeLevel(This->wineD3DDevice); /* Fix the result value. These values are mapped from their * d3d9 counterpart. */ switch(hr) { case WINED3DERR_DEVICELOST: if(This->cooperative_level & DDSCL_EXCLUSIVE) { LeaveCriticalSection(&ddraw_cs); return DDERR_NOEXCLUSIVEMODE; } else { LeaveCriticalSection(&ddraw_cs); return DDERR_EXCLUSIVEMODEALREADYSET; } case WINED3DERR_DEVICENOTRESET: LeaveCriticalSection(&ddraw_cs); return DD_OK; case WINED3D_OK: LeaveCriticalSection(&ddraw_cs); return DD_OK; case WINED3DERR_DRIVERINTERNALERROR: default: ERR("(%p) Unexpected return value %08x from wineD3D, " " returning DD_OK\n", This, hr); } LeaveCriticalSection(&ddraw_cs); return DD_OK; } /***************************************************************************** * IDirectDraw7::GetGDISurface * * Returns the surface that GDI is treating as the primary surface. * For Wine this is the front buffer * * Params: * GDISurface: Address to write the surface pointer to * * Returns: * DD_OK if the surface was found * DDERR_NOTFOUND if the GDI surface wasn't found * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetGDISurface(IDirectDraw7 *iface, IDirectDrawSurface7 **GDISurface) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; IWineD3DSurface *Surf; IDirectDrawSurface7 *ddsurf; HRESULT hr; DDSCAPS2 ddsCaps; TRACE("(%p)->(%p)\n", This, GDISurface); /* Get the back buffer from the wineD3DDevice and search its * attached surfaces for the front buffer */ EnterCriticalSection(&ddraw_cs); hr = IWineD3DDevice_GetBackBuffer(This->wineD3DDevice, 0, /* SwapChain */ 0, /* first back buffer*/ WINED3DBACKBUFFER_TYPE_MONO, &Surf); if( (hr != D3D_OK) || (!Surf) ) { ERR("IWineD3DDevice::GetBackBuffer failed\n"); LeaveCriticalSection(&ddraw_cs); return DDERR_NOTFOUND; } /* GetBackBuffer AddRef()ed the surface, release it */ IWineD3DSurface_Release(Surf); IWineD3DSurface_GetParent(Surf, (IUnknown **) &ddsurf); IDirectDrawSurface7_Release(ddsurf); /* For the GetParent */ /* Find the front buffer */ ddsCaps.dwCaps = DDSCAPS_FRONTBUFFER; hr = IDirectDrawSurface7_GetAttachedSurface(ddsurf, &ddsCaps, GDISurface); if(hr != DD_OK) { ERR("IDirectDrawSurface7::GetAttachedSurface failed, hr = %x\n", hr); } /* The AddRef is OK this time */ LeaveCriticalSection(&ddraw_cs); return hr; } /***************************************************************************** * IDirectDraw7::EnumDisplayModes * * Enumerates the supported Display modes. The modes can be filtered with * the DDSD parameter. * * Params: * Flags: can be DDEDM_REFRESHRATES and DDEDM_STANDARDVGAMODES * DDSD: Surface description to filter the modes * Context: Pointer passed back to the callback function * cb: Application-provided callback function * * Returns: * DD_OK on success * DDERR_INVALIDPARAMS if the callback wasn't set * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_EnumDisplayModes(IDirectDraw7 *iface, DWORD Flags, DDSURFACEDESC2 *DDSD, void *Context, LPDDENUMMODESCALLBACK2 cb) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; unsigned int modenum, fmt; WINED3DFORMAT pixelformat = WINED3DFMT_UNKNOWN; WINED3DDISPLAYMODE mode; DDSURFACEDESC2 callback_sd; WINED3DDISPLAYMODE *enum_modes = NULL; unsigned enum_mode_count = 0, enum_mode_array_size = 0; WINED3DFORMAT checkFormatList[] = { WINED3DFMT_R8G8B8, WINED3DFMT_A8R8G8B8, WINED3DFMT_X8R8G8B8, WINED3DFMT_R5G6B5, WINED3DFMT_X1R5G5B5, WINED3DFMT_A1R5G5B5, WINED3DFMT_A4R4G4B4, WINED3DFMT_R3G3B2, WINED3DFMT_A8R3G3B2, WINED3DFMT_X4R4G4B4, WINED3DFMT_R10G10B10A2_UNORM, WINED3DFMT_R8G8B8A8_UNORM, WINED3DFMT_X8B8G8R8, WINED3DFMT_A2R10G10B10, WINED3DFMT_A8P8, WINED3DFMT_P8 }; TRACE("(%p)->(%p,%p,%p): Relay\n", This, DDSD, Context, cb); EnterCriticalSection(&ddraw_cs); /* This looks sane */ if(!cb) { LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } if(DDSD) { if ((DDSD->dwFlags & DDSD_PIXELFORMAT) && (DDSD->u4.ddpfPixelFormat.dwFlags & DDPF_RGB) ) pixelformat = PixelFormat_DD2WineD3D(&DDSD->u4.ddpfPixelFormat); } if(!(Flags & DDEDM_REFRESHRATES)) { enum_mode_array_size = 16; enum_modes = HeapAlloc(GetProcessHeap(), 0, sizeof(WINED3DDISPLAYMODE) * enum_mode_array_size); if (!enum_modes) { ERR("Out of memory\n"); LeaveCriticalSection(&ddraw_cs); return DDERR_OUTOFMEMORY; } } for(fmt = 0; fmt < (sizeof(checkFormatList) / sizeof(checkFormatList[0])); fmt++) { if(pixelformat != WINED3DFMT_UNKNOWN && checkFormatList[fmt] != pixelformat) { continue; } modenum = 0; while(IWineD3D_EnumAdapterModes(This->wineD3D, WINED3DADAPTER_DEFAULT, checkFormatList[fmt], modenum++, &mode) == WINED3D_OK) { if(DDSD) { if(DDSD->dwFlags & DDSD_WIDTH && mode.Width != DDSD->dwWidth) continue; if(DDSD->dwFlags & DDSD_HEIGHT && mode.Height != DDSD->dwHeight) continue; } if(!(Flags & DDEDM_REFRESHRATES)) { /* DX docs state EnumDisplayMode should return only unique modes. If DDEDM_REFRESHRATES is not set, refresh * rate doesn't matter when determining if the mode is unique. So modes only differing in refresh rate have * to be reduced to a single unique result in such case. */ BOOL found = FALSE; unsigned i; for (i = 0; i < enum_mode_count; i++) { if(enum_modes[i].Width == mode.Width && enum_modes[i].Height == mode.Height && enum_modes[i].Format == mode.Format) { found = TRUE; break; } } if(found) continue; } memset(&callback_sd, 0, sizeof(callback_sd)); callback_sd.dwSize = sizeof(callback_sd); callback_sd.u4.ddpfPixelFormat.dwSize = sizeof(DDPIXELFORMAT); callback_sd.dwFlags = DDSD_HEIGHT|DDSD_WIDTH|DDSD_PIXELFORMAT|DDSD_PITCH; if(Flags & DDEDM_REFRESHRATES) { callback_sd.dwFlags |= DDSD_REFRESHRATE; callback_sd.u2.dwRefreshRate = mode.RefreshRate; } callback_sd.dwWidth = mode.Width; callback_sd.dwHeight = mode.Height; PixelFormat_WineD3DtoDD(&callback_sd.u4.ddpfPixelFormat, mode.Format); /* Calc pitch and DWORD align like MSDN says */ callback_sd.u1.lPitch = (callback_sd.u4.ddpfPixelFormat.u1.dwRGBBitCount / 8) * mode.Width; callback_sd.u1.lPitch = (callback_sd.u1.lPitch + 3) & ~3; TRACE("Enumerating %dx%dx%d @%d\n", callback_sd.dwWidth, callback_sd.dwHeight, callback_sd.u4.ddpfPixelFormat.u1.dwRGBBitCount, callback_sd.u2.dwRefreshRate); if(cb(&callback_sd, Context) == DDENUMRET_CANCEL) { TRACE("Application asked to terminate the enumeration\n"); HeapFree(GetProcessHeap(), 0, enum_modes); LeaveCriticalSection(&ddraw_cs); return DD_OK; } if(!(Flags & DDEDM_REFRESHRATES)) { if (enum_mode_count == enum_mode_array_size) { WINED3DDISPLAYMODE *new_enum_modes; enum_mode_array_size *= 2; new_enum_modes = HeapReAlloc(GetProcessHeap(), 0, enum_modes, sizeof(WINED3DDISPLAYMODE) * enum_mode_array_size); if (!new_enum_modes) { ERR("Out of memory\n"); HeapFree(GetProcessHeap(), 0, enum_modes); LeaveCriticalSection(&ddraw_cs); return DDERR_OUTOFMEMORY; } enum_modes = new_enum_modes; } enum_modes[enum_mode_count++] = mode; } } } TRACE("End of enumeration\n"); HeapFree(GetProcessHeap(), 0, enum_modes); LeaveCriticalSection(&ddraw_cs); return DD_OK; } /***************************************************************************** * IDirectDraw7::EvaluateMode * * Used with IDirectDraw7::StartModeTest to test video modes. * EvaluateMode is used to pass or fail a mode, and continue with the next * mode * * Params: * Flags: DDEM_MODEPASSED or DDEM_MODEFAILED * Timeout: Returns the amount of seconds left before the mode would have * been failed automatically * * Returns: * This implementation always DD_OK, because it's a stub * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_EvaluateMode(IDirectDraw7 *iface, DWORD Flags, DWORD *Timeout) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; FIXME("(%p)->(%d,%p): Stub!\n", This, Flags, Timeout); /* When implementing this, implement it in WineD3D */ return DD_OK; } /***************************************************************************** * IDirectDraw7::GetDeviceIdentifier * * Returns the device identifier, which gives information about the driver * Our device identifier is defined at the beginning of this file. * * Params: * DDDI: Address for the returned structure * Flags: Can be DDGDI_GETHOSTIDENTIFIER * * Returns: * On success it returns DD_OK * DDERR_INVALIDPARAMS if DDDI is NULL * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetDeviceIdentifier(IDirectDraw7 *iface, DDDEVICEIDENTIFIER2 *DDDI, DWORD Flags) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)->(%p,%08x)\n", This, DDDI, Flags); if(!DDDI) return DDERR_INVALIDPARAMS; /* The DDGDI_GETHOSTIDENTIFIER returns the information about the 2D * host adapter, if there's a secondary 3D adapter. This doesn't apply * to any modern hardware, nor is it interesting for Wine, so ignore it */ *DDDI = deviceidentifier; return DD_OK; } /***************************************************************************** * IDirectDraw7::GetSurfaceFromDC * * Returns the Surface for a GDI device context handle. * Is this related to IDirectDrawSurface::GetDC ??? * * Params: * hdc: hdc to return the surface for * Surface: Address to write the surface pointer to * * Returns: * Always returns DD_OK because it's a stub * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_GetSurfaceFromDC(IDirectDraw7 *iface, HDC hdc, IDirectDrawSurface7 **Surface) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; FIXME("(%p)->(%p,%p): Stub!\n", This, hdc, Surface); /* Implementation idea if needed: Loop through all surfaces and compare * their hdc with hdc. Implement it in WineD3D! */ return DDERR_NOTFOUND; } /***************************************************************************** * IDirectDraw7::RestoreAllSurfaces * * Calls the restore method of all surfaces * * Params: * * Returns: * Always returns DD_OK because it's a stub * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_RestoreAllSurfaces(IDirectDraw7 *iface) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; FIXME("(%p): Stub\n", This); /* This isn't hard to implement: Enumerate all WineD3D surfaces, * get their parent and call their restore method. Do not implement * it in WineD3D, as restoring a surface means re-creating the * WineD3DDSurface */ return DD_OK; } /***************************************************************************** * IDirectDraw7::StartModeTest * * Tests the specified video modes to update the system registry with * refresh rate information. StartModeTest starts the mode test, * EvaluateMode is used to fail or pass a mode. If EvaluateMode * isn't called within 15 seconds, the mode is failed automatically * * As refresh rates are handled by the X server, I don't think this * Method is important * * Params: * Modes: An array of mode specifications * NumModes: The number of modes in Modes * Flags: Some flags... * * Returns: * Returns DDERR_TESTFINISHED if flags contains DDSMT_ISTESTREQUIRED, * if no modes are passed, DDERR_INVALIDPARAMS is returned, * otherwise DD_OK * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_StartModeTest(IDirectDraw7 *iface, SIZE *Modes, DWORD NumModes, DWORD Flags) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; WARN("(%p)->(%p, %d, %x): Semi-Stub, most likely harmless\n", This, Modes, NumModes, Flags); /* This looks sane */ if( (!Modes) || (NumModes == 0) ) return DDERR_INVALIDPARAMS; /* DDSMT_ISTESTREQUIRED asks if a mode test is necessary. * As it is not, DDERR_TESTFINISHED is returned * (hopefully that's correct * if(Flags & DDSMT_ISTESTREQUIRED) return DDERR_TESTFINISHED; * well, that value doesn't (yet) exist in the wine headers, so ignore it */ return DD_OK; } /***************************************************************************** * IDirectDrawImpl_RecreateSurfacesCallback * * Enumeration callback for IDirectDrawImpl_RecreateAllSurfaces. * It re-recreates the WineD3DSurface. It's pretty straightforward * *****************************************************************************/ HRESULT WINAPI IDirectDrawImpl_RecreateSurfacesCallback(IDirectDrawSurface7 *surf, DDSURFACEDESC2 *desc, void *Context) { IDirectDrawSurfaceImpl *surfImpl = (IDirectDrawSurfaceImpl *)surf; IDirectDrawImpl *This = surfImpl->ddraw; IUnknown *Parent; IParentImpl *parImpl = NULL; IWineD3DSurface *wineD3DSurface; IWineD3DSwapChain *swapchain; HRESULT hr; void *tmp; IWineD3DClipper *clipper = NULL; WINED3DSURFACE_DESC Desc; WINED3DFORMAT Format; WINED3DRESOURCETYPE Type; DWORD Usage; WINED3DPOOL Pool; UINT Size; WINED3DMULTISAMPLE_TYPE MultiSampleType; DWORD MultiSampleQuality; UINT Width; UINT Height; TRACE("(%p): Enumerated Surface %p\n", This, surfImpl); /* For the enumeration */ IDirectDrawSurface7_Release(surf); if(surfImpl->ImplType == This->ImplType) return DDENUMRET_OK; /* Continue */ /* Get the objects */ swapchain = surfImpl->wineD3DSwapChain; surfImpl->wineD3DSwapChain = NULL; wineD3DSurface = surfImpl->WineD3DSurface; IWineD3DSurface_GetParent(wineD3DSurface, &Parent); IUnknown_Release(Parent); /* For the getParent */ /* Is the parent an IParent interface? */ if(IUnknown_QueryInterface(Parent, &IID_IParent, &tmp) == S_OK) { /* It is a IParent interface! */ IUnknown_Release(Parent); /* For the QueryInterface */ parImpl = (IParentImpl *)Parent; /* Release the reference the parent interface is holding */ IWineD3DSurface_Release(wineD3DSurface); } /* get the clipper */ IWineD3DSurface_GetClipper(wineD3DSurface, &clipper); /* Get the surface properties */ Desc.Format = &Format; Desc.Type = &Type; Desc.Usage = &Usage; Desc.Pool = &Pool; Desc.Size = &Size; Desc.MultiSampleType = &MultiSampleType; Desc.MultiSampleQuality = &MultiSampleQuality; Desc.Width = &Width; Desc.Height = &Height; hr = IWineD3DSurface_GetDesc(wineD3DSurface, &Desc); if(hr != D3D_OK) return hr; if(swapchain) { /* If there's a swapchain, it owns the IParent interface. Create a new one for the * new surface */ parImpl = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*parImpl)); parImpl->lpVtbl = &IParent_Vtbl; parImpl->ref = 1; Parent = (IUnknown *) parImpl; } /* Create the new surface */ hr = IWineD3DDevice_CreateSurface(This->wineD3DDevice, Width, Height, Format, TRUE /* Lockable */, FALSE /* Discard */, surfImpl->mipmap_level, &surfImpl->WineD3DSurface, Type, Usage, Pool, MultiSampleType, MultiSampleQuality, 0 /* SharedHandle */, This->ImplType, Parent); if(hr != D3D_OK) return hr; IWineD3DSurface_SetClipper(surfImpl->WineD3DSurface, clipper); /* Update the IParent if it exists */ if(parImpl) { parImpl->child = (IUnknown *) surfImpl->WineD3DSurface; /* Add a reference for the IParent */ IWineD3DSurface_AddRef(surfImpl->WineD3DSurface); } /* TODO: Copy the surface content, except for render targets */ /* If there's a swapchain, it owns the wined3d surfaces. So Destroy * the swapchain */ if(swapchain) { /* The backbuffers have the swapchain set as well, but the primary * owns it and destroys it */ if(surfImpl->surface_desc.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE) { IWineD3DDevice_UninitGDI(This->wineD3DDevice, D3D7CB_DestroySwapChain); } surfImpl->isRenderTarget = FALSE; } else { if(IWineD3DSurface_Release(wineD3DSurface) == 0) TRACE("Surface released successful, next surface\n"); else ERR("Something's still holding the old WineD3DSurface\n"); } surfImpl->ImplType = This->ImplType; if(clipper) { IWineD3DClipper_Release(clipper); } return DDENUMRET_OK; } /***************************************************************************** * IDirectDrawImpl_RecreateAllSurfaces * * A function, that converts all wineD3DSurfaces to the new implementation type * It enumerates all surfaces with IWineD3DDevice::EnumSurfaces, creates a * new WineD3DSurface, copies the content and releases the old surface * *****************************************************************************/ static HRESULT IDirectDrawImpl_RecreateAllSurfaces(IDirectDrawImpl *This) { DDSURFACEDESC2 desc; TRACE("(%p): Switch to implementation %d\n", This, This->ImplType); if(This->ImplType != SURFACE_OPENGL && This->d3d_initialized) { /* Should happen almost never */ FIXME("(%p) Switching to non-opengl surfaces with d3d started. Is this a bug?\n", This); /* Shutdown d3d */ IWineD3DDevice_Uninit3D(This->wineD3DDevice, D3D7CB_DestroyDepthStencilSurface, D3D7CB_DestroySwapChain); } /* Contrary: D3D starting is handled by the caller, because it knows the render target */ memset(&desc, 0, sizeof(desc)); desc.dwSize = sizeof(desc); return IDirectDraw7_EnumSurfaces((IDirectDraw7 *)This, 0, &desc, This, IDirectDrawImpl_RecreateSurfacesCallback); } ULONG WINAPI D3D7CB_DestroySwapChain(IWineD3DSwapChain *pSwapChain) { IUnknown* swapChainParent; TRACE("(%p) call back\n", pSwapChain); IWineD3DSwapChain_GetParent(pSwapChain, &swapChainParent); IUnknown_Release(swapChainParent); return IUnknown_Release(swapChainParent); } ULONG WINAPI D3D7CB_DestroyDepthStencilSurface(IWineD3DSurface *pSurface) { IUnknown* surfaceParent; TRACE("(%p) call back\n", pSurface); IWineD3DSurface_GetParent(pSurface, &surfaceParent); IUnknown_Release(surfaceParent); return IUnknown_Release(surfaceParent); } /***************************************************************************** * IDirectDrawImpl_CreateNewSurface * * A helper function for IDirectDraw7::CreateSurface. It creates a new surface * with the passed parameters. * * Params: * DDSD: Description of the surface to create * Surf: Address to store the interface pointer at * * Returns: * DD_OK on success * *****************************************************************************/ static HRESULT IDirectDrawImpl_CreateNewSurface(IDirectDrawImpl *This, DDSURFACEDESC2 *pDDSD, IDirectDrawSurfaceImpl **ppSurf, UINT level) { HRESULT hr; UINT Width = 0, Height = 0; WINED3DFORMAT Format = WINED3DFMT_UNKNOWN; WINED3DRESOURCETYPE ResType = WINED3DRTYPE_SURFACE; DWORD Usage = 0; WINED3DSURFTYPE ImplType = This->ImplType; WINED3DSURFACE_DESC Desc; IUnknown *Parent; IParentImpl *parImpl = NULL; WINED3DPOOL Pool = WINED3DPOOL_DEFAULT; /* Dummies for GetDesc */ WINED3DPOOL dummy_d3dpool; WINED3DMULTISAMPLE_TYPE dummy_mst; UINT dummy_uint; DWORD dummy_dword; if (TRACE_ON(ddraw)) { TRACE(" (%p) Requesting surface desc :\n", This); DDRAW_dump_surface_desc(pDDSD); } /* Select the surface type, if it wasn't choosen yet */ if(ImplType == SURFACE_UNKNOWN) { /* Use GL Surfaces if a D3DDEVICE Surface is requested */ if(pDDSD->ddsCaps.dwCaps & DDSCAPS_3DDEVICE) { TRACE("(%p) Choosing GL surfaces because a 3DDEVICE Surface was requested\n", This); ImplType = SURFACE_OPENGL; } /* Otherwise use GDI surfaces for now */ else { TRACE("(%p) Choosing GDI surfaces for 2D rendering\n", This); ImplType = SURFACE_GDI; } /* Policy if all surface implementations are available: * First, check if a default type was set with winecfg. If not, * try Xrender surfaces, and use them if they work. Next, check if * accelerated OpenGL is available, and use GL surfaces in this * case. If all else fails, use GDI surfaces. If a 3DDEVICE surface * was created, always use OpenGL surfaces. * * (Note: Xrender surfaces are not implemented for now, the * unaccelerated implementation uses GDI to render in Software) */ /* Store the type. If it needs to be changed, all WineD3DSurfaces have to * be re-created. This could be done with IDirectDrawSurface7::Restore */ This->ImplType = ImplType; } else { if((pDDSD->ddsCaps.dwCaps & DDSCAPS_3DDEVICE ) && (This->ImplType != SURFACE_OPENGL ) && DefaultSurfaceType == SURFACE_UNKNOWN) { /* We have to change to OpenGL, * and re-create all WineD3DSurfaces */ ImplType = SURFACE_OPENGL; This->ImplType = ImplType; TRACE("(%p) Re-creating all surfaces\n", This); IDirectDrawImpl_RecreateAllSurfaces(This); TRACE("(%p) Done recreating all surfaces\n", This); } else if(This->ImplType != SURFACE_OPENGL && pDDSD->ddsCaps.dwCaps & DDSCAPS_3DDEVICE) { WARN("The application requests a 3D capable surface, but a non-opengl surface was set in the registry\n"); /* Do not fail surface creation, only fail 3D device creation */ } } if (!(pDDSD->ddsCaps.dwCaps & (DDSCAPS_VIDEOMEMORY | DDSCAPS_SYSTEMMEMORY)) && !((pDDSD->ddsCaps.dwCaps & DDSCAPS_TEXTURE) && (pDDSD->ddsCaps.dwCaps2 & DDSCAPS2_TEXTUREMANAGE)) ) { /* Tests show surfaces without memory flags get these flags added right after creation. */ pDDSD->ddsCaps.dwCaps |= DDSCAPS_LOCALVIDMEM | DDSCAPS_VIDEOMEMORY; } /* Get the correct wined3d usage */ if (pDDSD->ddsCaps.dwCaps & (DDSCAPS_PRIMARYSURFACE | DDSCAPS_3DDEVICE ) ) { Usage |= WINED3DUSAGE_RENDERTARGET; pDDSD->ddsCaps.dwCaps |= DDSCAPS_VISIBLE; } if (pDDSD->ddsCaps.dwCaps & (DDSCAPS_OVERLAY)) { Usage |= WINED3DUSAGE_OVERLAY; } if(This->depthstencil || (pDDSD->ddsCaps.dwCaps & DDSCAPS_ZBUFFER) ) { /* The depth stencil creation callback sets this flag. * Set the WineD3D usage to let it know that it's a depth * Stencil surface. */ Usage |= WINED3DUSAGE_DEPTHSTENCIL; } if(pDDSD->ddsCaps.dwCaps & DDSCAPS_SYSTEMMEMORY) { Pool = WINED3DPOOL_SYSTEMMEM; } else if(pDDSD->ddsCaps.dwCaps2 & DDSCAPS2_TEXTUREMANAGE) { Pool = WINED3DPOOL_MANAGED; /* Managed textures have the system memory flag set */ pDDSD->ddsCaps.dwCaps |= DDSCAPS_SYSTEMMEMORY; } else if(pDDSD->ddsCaps.dwCaps & DDSCAPS_VIDEOMEMORY) { /* Videomemory adds localvidmem, this is mutually exclusive with systemmemory * and texturemanage */ pDDSD->ddsCaps.dwCaps |= DDSCAPS_LOCALVIDMEM; } Format = PixelFormat_DD2WineD3D(&pDDSD->u4.ddpfPixelFormat); if(Format == WINED3DFMT_UNKNOWN) { ERR("Unsupported / Unknown pixelformat\n"); return DDERR_INVALIDPIXELFORMAT; } /* Create the Surface object */ *ppSurf = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(IDirectDrawSurfaceImpl)); if(!*ppSurf) { ERR("(%p) Error allocating memory for a surface\n", This); return DDERR_OUTOFVIDEOMEMORY; } (*ppSurf)->lpVtbl = &IDirectDrawSurface7_Vtbl; (*ppSurf)->IDirectDrawSurface3_vtbl = &IDirectDrawSurface3_Vtbl; (*ppSurf)->IDirectDrawGammaControl_vtbl = &IDirectDrawGammaControl_Vtbl; (*ppSurf)->IDirect3DTexture2_vtbl = &IDirect3DTexture2_Vtbl; (*ppSurf)->IDirect3DTexture_vtbl = &IDirect3DTexture1_Vtbl; (*ppSurf)->ref = 1; (*ppSurf)->version = 7; TRACE("%p->version = %d\n", (*ppSurf), (*ppSurf)->version); (*ppSurf)->ddraw = This; (*ppSurf)->surface_desc.dwSize = sizeof(DDSURFACEDESC2); (*ppSurf)->surface_desc.u4.ddpfPixelFormat.dwSize = sizeof(DDPIXELFORMAT); DD_STRUCT_COPY_BYSIZE(&(*ppSurf)->surface_desc, pDDSD); /* Surface attachments */ (*ppSurf)->next_attached = NULL; (*ppSurf)->first_attached = *ppSurf; /* Needed to re-create the surface on an implementation change */ (*ppSurf)->ImplType = ImplType; /* For D3DDevice creation */ (*ppSurf)->isRenderTarget = FALSE; /* A trace message for debugging */ TRACE("(%p) Created IDirectDrawSurface implementation structure at %p\n", This, *ppSurf); if(pDDSD->ddsCaps.dwCaps & ( DDSCAPS_PRIMARYSURFACE | DDSCAPS_TEXTURE | DDSCAPS_3DDEVICE) ) { /* Render targets and textures need a IParent interface, * because WineD3D will destroy them when the swapchain * is released */ parImpl = HeapAlloc(GetProcessHeap(), 0, sizeof(IParentImpl)); if(!parImpl) { ERR("Out of memory when allocating memory for a IParent implementation\n"); return DDERR_OUTOFMEMORY; } parImpl->ref = 1; parImpl->lpVtbl = &IParent_Vtbl; Parent = (IUnknown *)parImpl; TRACE("Using IParent interface %p as parent\n", parImpl); } else { /* Use the surface as parent */ Parent = (IUnknown *)*ppSurf; TRACE("Using Surface interface %p as parent\n", *ppSurf); } /* Now create the WineD3D Surface */ hr = IWineD3DDevice_CreateSurface(This->wineD3DDevice, pDDSD->dwWidth, pDDSD->dwHeight, Format, TRUE /* Lockable */, FALSE /* Discard */, level, &(*ppSurf)->WineD3DSurface, ResType, Usage, Pool, WINED3DMULTISAMPLE_NONE, 0 /* MultiSampleQuality */, 0 /* SharedHandle */, ImplType, Parent); if(hr != D3D_OK) { ERR("IWineD3DDevice::CreateSurface failed. hr = %08x\n", hr); return hr; } /* Set the child of the parent implementation if it exists */ if(parImpl) { parImpl->child = (IUnknown *) (*ppSurf)->WineD3DSurface; /* The IParent releases the WineD3DSurface, and * the ddraw surface does that too. Hold a reference */ IWineD3DSurface_AddRef((*ppSurf)->WineD3DSurface); } /* Increase the surface counter, and attach the surface */ InterlockedIncrement(&This->surfaces); list_add_head(&This->surface_list, &(*ppSurf)->surface_list_entry); /* Here we could store all created surfaces in the DirectDrawImpl structure, * But this could also be delegated to WineDDraw, as it keeps track of all its * resources. Not implemented for now, as there are more important things ;) */ /* Get the pixel format of the WineD3DSurface and store it. * Don't use the Format choosen above, WineD3D might have * changed it */ Desc.Format = &Format; Desc.Type = &ResType; Desc.Usage = &Usage; Desc.Pool = &dummy_d3dpool; Desc.Size = &dummy_uint; Desc.MultiSampleType = &dummy_mst; Desc.MultiSampleQuality = &dummy_dword; Desc.Width = &Width; Desc.Height = &Height; (*ppSurf)->surface_desc.dwFlags |= DDSD_PIXELFORMAT; hr = IWineD3DSurface_GetDesc((*ppSurf)->WineD3DSurface, &Desc); if(hr != D3D_OK) { ERR("IWineD3DSurface::GetDesc failed\n"); IDirectDrawSurface7_Release( (IDirectDrawSurface7 *) *ppSurf); return hr; } if(Format == WINED3DFMT_UNKNOWN) { FIXME("IWineD3DSurface::GetDesc returned WINED3DFMT_UNKNOWN\n"); } PixelFormat_WineD3DtoDD( &(*ppSurf)->surface_desc.u4.ddpfPixelFormat, Format); /* Anno 1602 stores the pitch right after surface creation, so make sure it's there. * I can't LockRect() the surface here because if OpenGL surfaces are in use, the * WineD3DDevice might not be usable for 3D yet, so an extra method was created. * TODO: Test other fourcc formats */ if(Format == WINED3DFMT_DXT1 || Format == WINED3DFMT_DXT2 || Format == WINED3DFMT_DXT3 || Format == WINED3DFMT_DXT4 || Format == WINED3DFMT_DXT5) { (*ppSurf)->surface_desc.dwFlags |= DDSD_LINEARSIZE; if(Format == WINED3DFMT_DXT1) { (*ppSurf)->surface_desc.u1.dwLinearSize = max(4, Width) * max(4, Height) / 2; } else { (*ppSurf)->surface_desc.u1.dwLinearSize = max(4, Width) * max(4, Height); } } else { (*ppSurf)->surface_desc.dwFlags |= DDSD_PITCH; (*ppSurf)->surface_desc.u1.lPitch = IWineD3DSurface_GetPitch((*ppSurf)->WineD3DSurface); } /* Application passed a color key? Set it! */ if(pDDSD->dwFlags & DDSD_CKDESTOVERLAY) { IWineD3DSurface_SetColorKey((*ppSurf)->WineD3DSurface, DDCKEY_DESTOVERLAY, (WINEDDCOLORKEY *) &pDDSD->u3.ddckCKDestOverlay); } if(pDDSD->dwFlags & DDSD_CKDESTBLT) { IWineD3DSurface_SetColorKey((*ppSurf)->WineD3DSurface, DDCKEY_DESTBLT, (WINEDDCOLORKEY *) &pDDSD->ddckCKDestBlt); } if(pDDSD->dwFlags & DDSD_CKSRCOVERLAY) { IWineD3DSurface_SetColorKey((*ppSurf)->WineD3DSurface, DDCKEY_SRCOVERLAY, (WINEDDCOLORKEY *) &pDDSD->ddckCKSrcOverlay); } if(pDDSD->dwFlags & DDSD_CKSRCBLT) { IWineD3DSurface_SetColorKey((*ppSurf)->WineD3DSurface, DDCKEY_SRCBLT, (WINEDDCOLORKEY *) &pDDSD->ddckCKSrcBlt); } if ( pDDSD->dwFlags & DDSD_LPSURFACE) { hr = IWineD3DSurface_SetMem((*ppSurf)->WineD3DSurface, pDDSD->lpSurface); if(hr != WINED3D_OK) { /* No need for a trace here, wined3d does that for us */ IDirectDrawSurface7_Release((IDirectDrawSurface7 *)*ppSurf); return hr; } } return DD_OK; } /***************************************************************************** * CreateAdditionalSurfaces * * Creates a new mipmap chain. * * Params: * root: Root surface to attach the newly created chain to * count: number of surfaces to create * DDSD: Description of the surface. Intentionally not a pointer to avoid side * effects on the caller * CubeFaceRoot: Whether the new surface is a root of a cube map face. This * creates an additional surface without the mipmapping flags * *****************************************************************************/ static HRESULT CreateAdditionalSurfaces(IDirectDrawImpl *This, IDirectDrawSurfaceImpl *root, UINT count, DDSURFACEDESC2 DDSD, BOOL CubeFaceRoot) { UINT i, j, level = 0; HRESULT hr; IDirectDrawSurfaceImpl *last = root; for(i = 0; i < count; i++) { IDirectDrawSurfaceImpl *object2 = NULL; /* increase the mipmap level, but only if a mipmap is created * In this case, also halve the size */ if(DDSD.ddsCaps.dwCaps & DDSCAPS_MIPMAP && !CubeFaceRoot) { level++; if(DDSD.dwWidth > 1) DDSD.dwWidth /= 2; if(DDSD.dwHeight > 1) DDSD.dwHeight /= 2; /* Set the mipmap sublevel flag according to msdn */ DDSD.ddsCaps.dwCaps2 |= DDSCAPS2_MIPMAPSUBLEVEL; } else { DDSD.ddsCaps.dwCaps2 &= ~DDSCAPS2_MIPMAPSUBLEVEL; } CubeFaceRoot = FALSE; hr = IDirectDrawImpl_CreateNewSurface(This, &DDSD, &object2, level); if(hr != DD_OK) { return hr; } /* Add the new surface to the complex attachment array */ for(j = 0; j < MAX_COMPLEX_ATTACHED; j++) { if(last->complex_array[j]) continue; last->complex_array[j] = object2; break; } last = object2; /* Remove the (possible) back buffer cap from the new surface description, * because only one surface in the flipping chain is a back buffer, one * is a front buffer, the others are just primary surfaces. */ DDSD.ddsCaps.dwCaps &= ~DDSCAPS_BACKBUFFER; } return DD_OK; } /***************************************************************************** * IDirectDraw7::CreateSurface * * Creates a new IDirectDrawSurface object and returns its interface. * * The surface connections with wined3d are a bit tricky. Basically it works * like this: * * |------------------------| |-----------------| * | DDraw surface | | WineD3DSurface | * | | | | * | WineD3DSurface |-------------->| | * | Child |<------------->| Parent | * |------------------------| |-----------------| * * The DDraw surface is the parent of the wined3d surface, and it releases * the WineD3DSurface when the ddraw surface is destroyed. * * However, for all surfaces which can be in a container in WineD3D, * we have to do this. These surfaces are usually complex surfaces, * so this concerns primary surfaces with a front and a back buffer, * and textures. * * |------------------------| |-----------------| * | DDraw surface | | Container | * | | | | * | Child |<------------->| Parent | * | Texture |<------------->| | * | WineD3DSurface |<----| | Levels |<--| * | Complex connection | | | | | * |------------------------| | |-----------------| | * ^ | | * | | | * | | | * | |------------------| | |-----------------| | * | | IParent | |-------->| WineD3DSurface | | * | | | | | | * | | Child |<------------->| Parent | | * | | | | Container |<--| * | |------------------| |-----------------| | * | | * | |----------------------| | * | | DDraw surface 2 | | * | | | | * |<->| Complex root Child | | * | | Texture | | * | | WineD3DSurface |<----| | * | |----------------------| | | * | | | * | |---------------------| | |-----------------| | * | | IParent | |----->| WineD3DSurface | | * | | | | | | * | | Child |<---------->| Parent | | * | |---------------------| | Container |<--| * | |-----------------| | * | | * | ---More surfaces can follow--- | * * The reason is that the IWineD3DSwapchain(render target container) * and the IWineD3DTexure(Texture container) release the parents * of their surface's children, but by releasing the complex root * the surfaces which are complexly attached to it are destroyed * too. See IDirectDrawSurface::Release for a more detailed * explanation. * * Params: * DDSD: Description of the surface to create * Surf: Address to store the interface pointer at * UnkOuter: Basically for aggregation support, but ddraw doesn't support * aggregation, so it has to be NULL * * Returns: * DD_OK on success * CLASS_E_NOAGGREGATION if UnkOuter != NULL * DDERR_* if an error occurs * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_CreateSurface(IDirectDraw7 *iface, DDSURFACEDESC2 *DDSD, IDirectDrawSurface7 **Surf, IUnknown *UnkOuter) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; IDirectDrawSurfaceImpl *object = NULL; HRESULT hr; LONG extra_surfaces = 0; DDSURFACEDESC2 desc2; WINED3DDISPLAYMODE Mode; const DWORD sysvidmem = DDSCAPS_VIDEOMEMORY | DDSCAPS_SYSTEMMEMORY; TRACE("(%p)->(%p,%p,%p)\n", This, DDSD, Surf, UnkOuter); /* Some checks before we start */ if (TRACE_ON(ddraw)) { TRACE(" (%p) Requesting surface desc :\n", This); DDRAW_dump_surface_desc(DDSD); } EnterCriticalSection(&ddraw_cs); if (UnkOuter != NULL) { FIXME("(%p) : outer != NULL?\n", This); LeaveCriticalSection(&ddraw_cs); return CLASS_E_NOAGGREGATION; /* unchecked */ } if (Surf == NULL) { FIXME("(%p) You want to get back a surface? Don't give NULL ptrs!\n", This); LeaveCriticalSection(&ddraw_cs); return E_POINTER; /* unchecked */ } if (!(DDSD->dwFlags & DDSD_CAPS)) { /* DVIDEO.DLL does forget the DDSD_CAPS flag ... *sigh* */ DDSD->dwFlags |= DDSD_CAPS; } if (DDSD->ddsCaps.dwCaps & DDSCAPS_ALLOCONLOAD) { /* If the surface is of the 'alloconload' type, ignore the LPSURFACE field */ DDSD->dwFlags &= ~DDSD_LPSURFACE; } if ((DDSD->dwFlags & DDSD_LPSURFACE) && (DDSD->lpSurface == NULL)) { /* Frank Herbert's Dune specifies a null pointer for the surface, ignore the LPSURFACE field */ WARN("(%p) Null surface pointer specified, ignore it!\n", This); DDSD->dwFlags &= ~DDSD_LPSURFACE; } if((DDSD->ddsCaps.dwCaps & (DDSCAPS_FLIP | DDSCAPS_PRIMARYSURFACE)) == (DDSCAPS_FLIP | DDSCAPS_PRIMARYSURFACE) && !(This->cooperative_level & DDSCL_EXCLUSIVE)) { TRACE("(%p): Attempt to create a flipable primary surface without DDSCL_EXCLUSIVE set\n", This); *Surf = NULL; LeaveCriticalSection(&ddraw_cs); return DDERR_NOEXCLUSIVEMODE; } if(DDSD->ddsCaps.dwCaps & (DDSCAPS_FRONTBUFFER | DDSCAPS_BACKBUFFER)) { WARN("Application tried to create an explicit front or back buffer\n"); LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDCAPS; } if((DDSD->ddsCaps.dwCaps & sysvidmem) == sysvidmem) { /* This is a special switch in ddrawex.dll, but not allowed in ddraw.dll */ WARN("Application tries to put the surface in both system and video memory\n"); LeaveCriticalSection(&ddraw_cs); *Surf = NULL; return DDERR_INVALIDCAPS; } /* Check cube maps but only if the size includes them */ if (DDSD->dwSize >= sizeof(DDSURFACEDESC2)) { if(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP_ALLFACES && !(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP)) { WARN("Cube map faces requested without cube map flag\n"); LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDCAPS; } if(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP && (DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP_ALLFACES) == 0) { WARN("Cube map without faces requested\n"); LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } /* Quick tests confirm those can be created, but we don't do that yet */ if(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP && (DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP_ALLFACES) != DDSCAPS2_CUBEMAP_ALLFACES) { FIXME("Partial cube maps not supported yet\n"); } } /* According to the msdn this flag is ignored by CreateSurface */ if (DDSD->dwSize >= sizeof(DDSURFACEDESC2)) DDSD->ddsCaps.dwCaps2 &= ~DDSCAPS2_MIPMAPSUBLEVEL; /* Modify some flags */ memset(&desc2, 0, sizeof(desc2)); desc2.dwSize = sizeof(desc2); /* For the struct copy */ DD_STRUCT_COPY_BYSIZE(&desc2, DDSD); desc2.dwSize = sizeof(desc2); /* To override a possibly smaller size */ desc2.u4.ddpfPixelFormat.dwSize=sizeof(DDPIXELFORMAT); /* Just to be sure */ /* Get the video mode from WineD3D - we will need it */ hr = IWineD3DDevice_GetDisplayMode(This->wineD3DDevice, 0, /* Swapchain 0 */ &Mode); if(FAILED(hr)) { ERR("Failed to read display mode from wined3d\n"); switch(This->orig_bpp) { case 8: Mode.Format = WINED3DFMT_P8; break; case 15: Mode.Format = WINED3DFMT_X1R5G5B5; break; case 16: Mode.Format = WINED3DFMT_R5G6B5; break; case 24: Mode.Format = WINED3DFMT_R8G8B8; break; case 32: Mode.Format = WINED3DFMT_X8R8G8B8; break; } Mode.Width = This->orig_width; Mode.Height = This->orig_height; } /* No pixelformat given? Use the current screen format */ if(!(desc2.dwFlags & DDSD_PIXELFORMAT)) { desc2.dwFlags |= DDSD_PIXELFORMAT; desc2.u4.ddpfPixelFormat.dwSize=sizeof(DDPIXELFORMAT); /* Wait: It could be a Z buffer */ if(desc2.ddsCaps.dwCaps & DDSCAPS_ZBUFFER) { switch(desc2.u2.dwMipMapCount) /* Who had this glorious idea? */ { case 15: PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D15S1); break; case 16: PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D16_UNORM); break; case 24: PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D24X8); break; case 32: PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D32); break; default: ERR("Unknown Z buffer bit depth\n"); } } else { PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, Mode.Format); } } /* No Width or no Height? Use the original screen size */ if(!(desc2.dwFlags & DDSD_WIDTH) || !(desc2.dwFlags & DDSD_HEIGHT) ) { /* Invalid for non-render targets */ if(!(desc2.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE)) { WARN("Creating a non-Primary surface without Width or Height info, returning DDERR_INVALIDPARAMS\n"); *Surf = NULL; LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } desc2.dwFlags |= DDSD_WIDTH | DDSD_HEIGHT; desc2.dwWidth = Mode.Width; desc2.dwHeight = Mode.Height; } /* Mipmap count fixes */ if(desc2.ddsCaps.dwCaps & DDSCAPS_MIPMAP) { if(desc2.ddsCaps.dwCaps & DDSCAPS_COMPLEX) { if(desc2.dwFlags & DDSD_MIPMAPCOUNT) { /* Mipmap count is given, should not be 0 */ if( desc2.u2.dwMipMapCount == 0 ) { LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } } else { /* Undocumented feature: Create sublevels until * either the width or the height is 1 */ DWORD min = desc2.dwWidth < desc2.dwHeight ? desc2.dwWidth : desc2.dwHeight; desc2.u2.dwMipMapCount = 0; while( min ) { desc2.u2.dwMipMapCount += 1; min >>= 1; } } } else { /* Not-complex mipmap -> Mipmapcount = 1 */ desc2.u2.dwMipMapCount = 1; } extra_surfaces = desc2.u2.dwMipMapCount - 1; /* There's a mipmap count in the created surface in any case */ desc2.dwFlags |= DDSD_MIPMAPCOUNT; } /* If no mipmap is given, the texture has only one level */ /* The first surface is a front buffer, the back buffer is created afterwards */ if( (desc2.dwFlags & DDSD_CAPS) && (desc2.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE) ) { desc2.ddsCaps.dwCaps |= DDSCAPS_FRONTBUFFER; } /* The root surface in a cube map is positive x */ if(desc2.ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP) { desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_ALLFACES; desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEX; } /* Create the first surface */ hr = IDirectDrawImpl_CreateNewSurface(This, &desc2, &object, 0); if( hr != DD_OK) { ERR("IDirectDrawImpl_CreateNewSurface failed with %08x\n", hr); LeaveCriticalSection(&ddraw_cs); return hr; } object->is_complex_root = TRUE; *Surf = (IDirectDrawSurface7 *)object; /* Create Additional surfaces if necessary * This applies to Primary surfaces which have a back buffer count * set, but not to mipmap textures. In case of Mipmap textures, * wineD3D takes care of the creation of additional surfaces */ if(DDSD->dwFlags & DDSD_BACKBUFFERCOUNT) { extra_surfaces = DDSD->dwBackBufferCount; desc2.ddsCaps.dwCaps &= ~DDSCAPS_FRONTBUFFER; /* It's not a front buffer */ desc2.ddsCaps.dwCaps |= DDSCAPS_BACKBUFFER; } hr = DD_OK; if(desc2.ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP) { desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_ALLFACES; desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEZ; hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE); desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_NEGATIVEZ; desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEZ; hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE); desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_POSITIVEZ; desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEY; hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE); desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_NEGATIVEY; desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEY; hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE); desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_POSITIVEY; desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEX; hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE); desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_NEGATIVEX; desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEX; } hr |= CreateAdditionalSurfaces(This, object, extra_surfaces, desc2, FALSE); if(hr != DD_OK) { /* This destroys and possibly created surfaces too */ IDirectDrawSurface_Release((IDirectDrawSurface7 *)object); LeaveCriticalSection(&ddraw_cs); return hr; } /* If the implementation is OpenGL and there's no d3ddevice, attach a d3ddevice * But attach the d3ddevice only if the currently created surface was * a primary surface (2D app in 3D mode) or a 3DDEVICE surface (3D app) * The only case I can think of where this doesn't apply is when a * 2D app was configured by the user to run with OpenGL and it didn't create * the render target as first surface. In this case the render target creation * will cause the 3D init. */ if( (This->ImplType == SURFACE_OPENGL) && !(This->d3d_initialized) && desc2.ddsCaps.dwCaps & (DDSCAPS_PRIMARYSURFACE | DDSCAPS_3DDEVICE) ) { IDirectDrawSurfaceImpl *target = object, *surface; struct list *entry; /* Search for the primary to use as render target */ LIST_FOR_EACH(entry, &This->surface_list) { surface = LIST_ENTRY(entry, IDirectDrawSurfaceImpl, surface_list_entry); if((surface->surface_desc.ddsCaps.dwCaps & (DDSCAPS_PRIMARYSURFACE | DDSCAPS_FRONTBUFFER)) == (DDSCAPS_PRIMARYSURFACE | DDSCAPS_FRONTBUFFER)) { /* found */ target = surface; TRACE("Using primary %p as render target\n", target); break; } } TRACE("(%p) Attaching a D3DDevice, rendertarget = %p\n", This, target); hr = IDirectDrawImpl_AttachD3DDevice(This, target); if(hr != D3D_OK) { IDirectDrawSurfaceImpl *release_surf; ERR("IDirectDrawImpl_AttachD3DDevice failed, hr = %x\n", hr); *Surf = NULL; /* The before created surface structures are in an incomplete state here. * WineD3D holds the reference on the IParents, and it released them on the failure * already. So the regular release method implementation would fail on the attempt * to destroy either the IParents or the swapchain. So free the surface here. * The surface structure here is a list, not a tree, because onscreen targets * cannot be cube textures */ while(object) { release_surf = object; object = object->complex_array[0]; IDirectDrawSurfaceImpl_Destroy(release_surf); } LeaveCriticalSection(&ddraw_cs); return hr; } } else if(!(This->d3d_initialized) && desc2.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE) { IDirectDrawImpl_CreateGDISwapChain(This, object); } /* Addref the ddraw interface to keep an reference for each surface */ IDirectDraw7_AddRef(iface); object->ifaceToRelease = (IUnknown *) iface; /* Create a WineD3DTexture if a texture was requested */ if(desc2.ddsCaps.dwCaps & DDSCAPS_TEXTURE) { UINT levels; WINED3DFORMAT Format; WINED3DPOOL Pool = WINED3DPOOL_DEFAULT; This->tex_root = object; if(desc2.ddsCaps.dwCaps & DDSCAPS_MIPMAP) { /* a mipmap is created, create enough levels */ levels = desc2.u2.dwMipMapCount; } else { /* No mipmap is created, create one level */ levels = 1; } /* DDSCAPS_SYSTEMMEMORY textures are in WINED3DPOOL_SYSTEMMEM */ if(DDSD->ddsCaps.dwCaps & DDSCAPS_SYSTEMMEMORY) { Pool = WINED3DPOOL_SYSTEMMEM; } /* Should I forward the MANAGED cap to the managed pool ? */ /* Get the format. It's set already by CreateNewSurface */ Format = PixelFormat_DD2WineD3D(&object->surface_desc.u4.ddpfPixelFormat); /* The surfaces are already created, the callback only * passes the IWineD3DSurface to WineD3D */ if(desc2.ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP) { hr = IWineD3DDevice_CreateCubeTexture(This->wineD3DDevice, DDSD->dwWidth /* Edgelength */, levels, 0 /* usage */, Format, Pool, (IWineD3DCubeTexture **)&object->wineD3DTexture, 0 /* SharedHandle */, (IUnknown *)object); } else { hr = IWineD3DDevice_CreateTexture(This->wineD3DDevice, DDSD->dwWidth, DDSD->dwHeight, levels, 0 /* usage */, Format, Pool, (IWineD3DTexture **) &object->wineD3DTexture, 0 /* SharedHandle */, (IUnknown *)object); } This->tex_root = NULL; } LeaveCriticalSection(&ddraw_cs); return hr; } #define DDENUMSURFACES_SEARCHTYPE (DDENUMSURFACES_CANBECREATED|DDENUMSURFACES_DOESEXIST) #define DDENUMSURFACES_MATCHTYPE (DDENUMSURFACES_ALL|DDENUMSURFACES_MATCH|DDENUMSURFACES_NOMATCH) static BOOL Main_DirectDraw_DDPIXELFORMAT_Match(const DDPIXELFORMAT *requested, const DDPIXELFORMAT *provided) { /* Some flags must be present in both or neither for a match. */ static const DWORD must_match = DDPF_PALETTEINDEXED1 | DDPF_PALETTEINDEXED2 | DDPF_PALETTEINDEXED4 | DDPF_PALETTEINDEXED8 | DDPF_FOURCC | DDPF_ZBUFFER | DDPF_STENCILBUFFER; if ((requested->dwFlags & provided->dwFlags) != requested->dwFlags) return FALSE; if ((requested->dwFlags & must_match) != (provided->dwFlags & must_match)) return FALSE; if (requested->dwFlags & DDPF_FOURCC) if (requested->dwFourCC != provided->dwFourCC) return FALSE; if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_ZBUFFER|DDPF_ALPHA |DDPF_LUMINANCE|DDPF_BUMPDUDV)) if (requested->u1.dwRGBBitCount != provided->u1.dwRGBBitCount) return FALSE; if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_STENCILBUFFER |DDPF_LUMINANCE|DDPF_BUMPDUDV)) if (requested->u2.dwRBitMask != provided->u2.dwRBitMask) return FALSE; if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_ZBUFFER|DDPF_BUMPDUDV)) if (requested->u3.dwGBitMask != provided->u3.dwGBitMask) return FALSE; /* I could be wrong about the bumpmapping. MSDN docs are vague. */ if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_STENCILBUFFER |DDPF_BUMPDUDV)) if (requested->u4.dwBBitMask != provided->u4.dwBBitMask) return FALSE; if (requested->dwFlags & (DDPF_ALPHAPIXELS|DDPF_ZPIXELS)) if (requested->u5.dwRGBAlphaBitMask != provided->u5.dwRGBAlphaBitMask) return FALSE; return TRUE; } static BOOL IDirectDrawImpl_DDSD_Match(const DDSURFACEDESC2* requested, const DDSURFACEDESC2* provided) { struct compare_info { DWORD flag; ptrdiff_t offset; size_t size; }; #define CMP(FLAG, FIELD) \ { DDSD_##FLAG, offsetof(DDSURFACEDESC2, FIELD), \ sizeof(((DDSURFACEDESC2 *)(NULL))->FIELD) } static const struct compare_info compare[] = { CMP(ALPHABITDEPTH, dwAlphaBitDepth), CMP(BACKBUFFERCOUNT, dwBackBufferCount), CMP(CAPS, ddsCaps), CMP(CKDESTBLT, ddckCKDestBlt), CMP(CKDESTOVERLAY, u3 /* ddckCKDestOverlay */), CMP(CKSRCBLT, ddckCKSrcBlt), CMP(CKSRCOVERLAY, ddckCKSrcOverlay), CMP(HEIGHT, dwHeight), CMP(LINEARSIZE, u1 /* dwLinearSize */), CMP(LPSURFACE, lpSurface), CMP(MIPMAPCOUNT, u2 /* dwMipMapCount */), CMP(PITCH, u1 /* lPitch */), /* PIXELFORMAT: manual */ CMP(REFRESHRATE, u2 /* dwRefreshRate */), CMP(TEXTURESTAGE, dwTextureStage), CMP(WIDTH, dwWidth), /* ZBUFFERBITDEPTH: "obsolete" */ }; #undef CMP unsigned int i; if ((requested->dwFlags & provided->dwFlags) != requested->dwFlags) return FALSE; for (i=0; i < sizeof(compare)/sizeof(compare[0]); i++) { if (requested->dwFlags & compare[i].flag && memcmp((const char *)provided + compare[i].offset, (const char *)requested + compare[i].offset, compare[i].size) != 0) return FALSE; } if (requested->dwFlags & DDSD_PIXELFORMAT) { if (!Main_DirectDraw_DDPIXELFORMAT_Match(&requested->u4.ddpfPixelFormat, &provided->u4.ddpfPixelFormat)) return FALSE; } return TRUE; } #undef DDENUMSURFACES_SEARCHTYPE #undef DDENUMSURFACES_MATCHTYPE /***************************************************************************** * IDirectDraw7::EnumSurfaces * * Loops through all surfaces attached to this device and calls the * application callback. This can't be relayed to WineD3DDevice, * because some WineD3DSurfaces' parents are IParent objects * * Params: * Flags: Some filtering flags. See IDirectDrawImpl_EnumSurfacesCallback * DDSD: Description to filter for * Context: Application-provided pointer, it's passed unmodified to the * Callback function * Callback: Address to call for each surface * * Returns: * DDERR_INVALIDPARAMS if the callback is NULL * DD_OK on success * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_EnumSurfaces(IDirectDraw7 *iface, DWORD Flags, DDSURFACEDESC2 *DDSD, void *Context, LPDDENUMSURFACESCALLBACK7 Callback) { /* The surface enumeration is handled by WineDDraw, * because it keeps track of all surfaces attached to * it. The filtering is done by our callback function, * because WineDDraw doesn't handle ddraw-like surface * caps structures */ IDirectDrawImpl *This = (IDirectDrawImpl *)iface; IDirectDrawSurfaceImpl *surf; BOOL all, nomatch; DDSURFACEDESC2 desc; struct list *entry, *entry2; all = Flags & DDENUMSURFACES_ALL; nomatch = Flags & DDENUMSURFACES_NOMATCH; TRACE("(%p)->(%x,%p,%p,%p)\n", This, Flags, DDSD, Context, Callback); EnterCriticalSection(&ddraw_cs); if(!Callback) { LeaveCriticalSection(&ddraw_cs); return DDERR_INVALIDPARAMS; } /* Use the _SAFE enumeration, the app may destroy enumerated surfaces */ LIST_FOR_EACH_SAFE(entry, entry2, &This->surface_list) { surf = LIST_ENTRY(entry, IDirectDrawSurfaceImpl, surface_list_entry); if (all || (nomatch != IDirectDrawImpl_DDSD_Match(DDSD, &surf->surface_desc))) { desc = surf->surface_desc; IDirectDrawSurface7_AddRef((IDirectDrawSurface7 *)surf); if (Callback((IDirectDrawSurface7 *)surf, &desc, Context) != DDENUMRET_OK) { LeaveCriticalSection(&ddraw_cs); return DD_OK; } } } LeaveCriticalSection(&ddraw_cs); return DD_OK; } static HRESULT WINAPI findRenderTarget(IDirectDrawSurface7 *surface, DDSURFACEDESC2 *desc, void *ctx) { IDirectDrawSurfaceImpl *surf = (IDirectDrawSurfaceImpl *)surface; IDirectDrawSurfaceImpl **target = ctx; if(!surf->isRenderTarget) { *target = surf; IDirectDrawSurface7_Release(surface); return DDENUMRET_CANCEL; } /* Recurse into the surface tree */ IDirectDrawSurface7_EnumAttachedSurfaces(surface, ctx, findRenderTarget); IDirectDrawSurface7_Release(surface); if(*target) return DDENUMRET_CANCEL; else return DDENUMRET_OK; /* Continue with the next neighbor surface */ } static HRESULT IDirectDrawImpl_CreateGDISwapChain(IDirectDrawImpl *This, IDirectDrawSurfaceImpl *primary) { HRESULT hr; WINED3DPRESENT_PARAMETERS presentation_parameters; HWND window; window = This->dest_window; memset(&presentation_parameters, 0, sizeof(presentation_parameters)); /* Use the surface description for the device parameters, not the * Device settings. The app might render to an offscreen surface */ presentation_parameters.BackBufferWidth = primary->surface_desc.dwWidth; presentation_parameters.BackBufferHeight = primary->surface_desc.dwHeight; presentation_parameters.BackBufferFormat = PixelFormat_DD2WineD3D(&primary->surface_desc.u4.ddpfPixelFormat); presentation_parameters.BackBufferCount = (primary->surface_desc.dwFlags & DDSD_BACKBUFFERCOUNT) ? primary->surface_desc.dwBackBufferCount : 0; presentation_parameters.MultiSampleType = WINED3DMULTISAMPLE_NONE; presentation_parameters.MultiSampleQuality = 0; presentation_parameters.SwapEffect = WINED3DSWAPEFFECT_FLIP; presentation_parameters.hDeviceWindow = window; presentation_parameters.Windowed = !(This->cooperative_level & DDSCL_FULLSCREEN); presentation_parameters.EnableAutoDepthStencil = FALSE; /* Not on GDI swapchains */ presentation_parameters.AutoDepthStencilFormat = 0; presentation_parameters.Flags = 0; presentation_parameters.FullScreen_RefreshRateInHz = WINED3DPRESENT_RATE_DEFAULT; /* Default rate: It's already set */ presentation_parameters.PresentationInterval = WINED3DPRESENT_INTERVAL_DEFAULT; This->d3d_target = primary; hr = IWineD3DDevice_InitGDI(This->wineD3DDevice, &presentation_parameters); This->d3d_target = NULL; if (hr != D3D_OK) { FIXME("(%p) call to IWineD3DDevice_InitGDI failed\n", This); primary->wineD3DSwapChain = NULL; } return hr; } /***************************************************************************** * IDirectDrawImpl_AttachD3DDevice * * Initializes the D3D capabilities of WineD3D * * Params: * primary: The primary surface for D3D * * Returns * DD_OK on success, * DDERR_* otherwise * *****************************************************************************/ static HRESULT IDirectDrawImpl_AttachD3DDevice(IDirectDrawImpl *This, IDirectDrawSurfaceImpl *primary) { HRESULT hr; HWND window = This->dest_window; WINED3DPRESENT_PARAMETERS localParameters; TRACE("(%p)->(%p)\n", This, primary); /* If there's no window, create a hidden window. WineD3D needs it */ if(window == 0 || window == GetDesktopWindow()) { window = CreateWindowExA(0, This->classname, "Hidden D3D Window", WS_DISABLED, 0, 0, GetSystemMetrics(SM_CXSCREEN), GetSystemMetrics(SM_CYSCREEN), NULL, NULL, GetModuleHandleA(0), NULL); ShowWindow(window, SW_HIDE); /* Just to be sure */ WARN("(%p) No window for the Direct3DDevice, created a hidden window. HWND=%p\n", This, window); } else { TRACE("(%p) Using existing window %p for Direct3D rendering\n", This, window); } This->d3d_window = window; /* Store the future Render Target surface */ This->d3d_target = primary; /* Use the surface description for the device parameters, not the * Device settings. The app might render to an offscreen surface */ localParameters.BackBufferWidth = primary->surface_desc.dwWidth; localParameters.BackBufferHeight = primary->surface_desc.dwHeight; localParameters.BackBufferFormat = PixelFormat_DD2WineD3D(&primary->surface_desc.u4.ddpfPixelFormat); localParameters.BackBufferCount = (primary->surface_desc.dwFlags & DDSD_BACKBUFFERCOUNT) ? primary->surface_desc.dwBackBufferCount : 0; localParameters.MultiSampleType = WINED3DMULTISAMPLE_NONE; localParameters.MultiSampleQuality = 0; localParameters.SwapEffect = WINED3DSWAPEFFECT_COPY; localParameters.hDeviceWindow = window; localParameters.Windowed = !(This->cooperative_level & DDSCL_FULLSCREEN); localParameters.EnableAutoDepthStencil = TRUE; localParameters.AutoDepthStencilFormat = WINED3DFMT_D16_UNORM; localParameters.Flags = 0; localParameters.FullScreen_RefreshRateInHz = WINED3DPRESENT_RATE_DEFAULT; /* Default rate: It's already set */ localParameters.PresentationInterval = WINED3DPRESENT_INTERVAL_DEFAULT; TRACE("Passing mode %d\n", localParameters.BackBufferFormat); /* Set this NOW, otherwise creating the depth stencil surface will cause a * recursive loop until ram or emulated video memory is full */ This->d3d_initialized = TRUE; hr = IWineD3DDevice_Init3D(This->wineD3DDevice, &localParameters); if(FAILED(hr)) { This->d3d_target = NULL; This->d3d_initialized = FALSE; return hr; } This->declArraySize = 2; This->decls = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*This->decls) * This->declArraySize); if(!This->decls) { ERR("Error allocating an array for the converted vertex decls\n"); This->declArraySize = 0; hr = IWineD3DDevice_Uninit3D(This->wineD3DDevice, D3D7CB_DestroyDepthStencilSurface, D3D7CB_DestroySwapChain); return E_OUTOFMEMORY; } /* Create an Index Buffer parent */ TRACE("(%p) Successfully initialized 3D\n", This); return DD_OK; } /***************************************************************************** * DirectDrawCreateClipper (DDRAW.@) * * Creates a new IDirectDrawClipper object. * * Params: * Clipper: Address to write the interface pointer to * UnkOuter: For aggregation support, which ddraw doesn't have. Has to be * NULL * * Returns: * CLASS_E_NOAGGREGATION if UnkOuter != NULL * E_OUTOFMEMORY if allocating the object failed * *****************************************************************************/ HRESULT WINAPI DirectDrawCreateClipper(DWORD Flags, LPDIRECTDRAWCLIPPER *Clipper, IUnknown *UnkOuter) { IDirectDrawClipperImpl* object; TRACE("(%08x,%p,%p)\n", Flags, Clipper, UnkOuter); EnterCriticalSection(&ddraw_cs); if (UnkOuter != NULL) { LeaveCriticalSection(&ddraw_cs); return CLASS_E_NOAGGREGATION; } if (!LoadWineD3D()) { LeaveCriticalSection(&ddraw_cs); return DDERR_NODIRECTDRAWSUPPORT; } object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(IDirectDrawClipperImpl)); if (object == NULL) { LeaveCriticalSection(&ddraw_cs); return E_OUTOFMEMORY; } object->lpVtbl = &IDirectDrawClipper_Vtbl; object->ref = 1; object->wineD3DClipper = pWineDirect3DCreateClipper((IUnknown *) object); if(!object->wineD3DClipper) { HeapFree(GetProcessHeap(), 0, object); LeaveCriticalSection(&ddraw_cs); return E_OUTOFMEMORY; } *Clipper = (IDirectDrawClipper *) object; LeaveCriticalSection(&ddraw_cs); return DD_OK; } /***************************************************************************** * IDirectDraw7::CreateClipper * * Creates a DDraw clipper. See DirectDrawCreateClipper for details * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_CreateClipper(IDirectDraw7 *iface, DWORD Flags, IDirectDrawClipper **Clipper, IUnknown *UnkOuter) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; TRACE("(%p)->(%x,%p,%p)\n", This, Flags, Clipper, UnkOuter); return DirectDrawCreateClipper(Flags, Clipper, UnkOuter); } /***************************************************************************** * IDirectDraw7::CreatePalette * * Creates a new IDirectDrawPalette object * * Params: * Flags: The flags for the new clipper * ColorTable: Color table to assign to the new clipper * Palette: Address to write the interface pointer to * UnkOuter: For aggregation support, which ddraw doesn't have. Has to be * NULL * * Returns: * CLASS_E_NOAGGREGATION if UnkOuter != NULL * E_OUTOFMEMORY if allocating the object failed * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_CreatePalette(IDirectDraw7 *iface, DWORD Flags, PALETTEENTRY *ColorTable, IDirectDrawPalette **Palette, IUnknown *pUnkOuter) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; IDirectDrawPaletteImpl *object; HRESULT hr = DDERR_GENERIC; TRACE("(%p)->(%x,%p,%p,%p)\n", This, Flags, ColorTable, Palette, pUnkOuter); EnterCriticalSection(&ddraw_cs); if(pUnkOuter != NULL) { WARN("pUnkOuter is %p, returning CLASS_E_NOAGGREGATION\n", pUnkOuter); LeaveCriticalSection(&ddraw_cs); return CLASS_E_NOAGGREGATION; } /* The refcount test shows that a cooplevel is required for this */ if(!This->cooperative_level) { WARN("No cooperative level set, returning DDERR_NOCOOPERATIVELEVELSET\n"); LeaveCriticalSection(&ddraw_cs); return DDERR_NOCOOPERATIVELEVELSET; } object = HeapAlloc(GetProcessHeap(), 0, sizeof(IDirectDrawPaletteImpl)); if(!object) { ERR("Out of memory when allocating memory for a palette implementation\n"); LeaveCriticalSection(&ddraw_cs); return E_OUTOFMEMORY; } object->lpVtbl = &IDirectDrawPalette_Vtbl; object->ref = 1; object->ddraw_owner = This; hr = IWineD3DDevice_CreatePalette(This->wineD3DDevice, Flags, ColorTable, &object->wineD3DPalette, (IUnknown *)object); if(hr != DD_OK) { HeapFree(GetProcessHeap(), 0, object); LeaveCriticalSection(&ddraw_cs); return hr; } IDirectDraw7_AddRef(iface); object->ifaceToRelease = (IUnknown *) iface; *Palette = (IDirectDrawPalette *)object; LeaveCriticalSection(&ddraw_cs); return DD_OK; } /***************************************************************************** * IDirectDraw7::DuplicateSurface * * Duplicates a surface. The surface memory points to the same memory as * the original surface, and it's released when the last surface referencing * it is released. I guess that's beyond Wine's surface management right now * (Idea: create a new DDraw surface with the same WineD3DSurface. I need a * test application to implement this) * * Params: * Src: Address of the source surface * Dest: Address to write the new surface pointer to * * Returns: * See IDirectDraw7::CreateSurface * *****************************************************************************/ static HRESULT WINAPI IDirectDrawImpl_DuplicateSurface(IDirectDraw7 *iface, IDirectDrawSurface7 *Src, IDirectDrawSurface7 **Dest) { IDirectDrawImpl *This = (IDirectDrawImpl *)iface; IDirectDrawSurfaceImpl *Surf = (IDirectDrawSurfaceImpl *)Src; FIXME("(%p)->(%p,%p)\n", This, Surf, Dest); /* For now, simply create a new, independent surface */ return IDirectDraw7_CreateSurface(iface, &Surf->surface_desc, Dest, NULL); } /***************************************************************************** * IDirectDraw7 VTable *****************************************************************************/ const IDirectDraw7Vtbl IDirectDraw7_Vtbl = { /*** IUnknown ***/ IDirectDrawImpl_QueryInterface, IDirectDrawImpl_AddRef, IDirectDrawImpl_Release, /*** IDirectDraw ***/ IDirectDrawImpl_Compact, IDirectDrawImpl_CreateClipper, IDirectDrawImpl_CreatePalette, IDirectDrawImpl_CreateSurface, IDirectDrawImpl_DuplicateSurface, IDirectDrawImpl_EnumDisplayModes, IDirectDrawImpl_EnumSurfaces, IDirectDrawImpl_FlipToGDISurface, IDirectDrawImpl_GetCaps, IDirectDrawImpl_GetDisplayMode, IDirectDrawImpl_GetFourCCCodes, IDirectDrawImpl_GetGDISurface, IDirectDrawImpl_GetMonitorFrequency, IDirectDrawImpl_GetScanLine, IDirectDrawImpl_GetVerticalBlankStatus, IDirectDrawImpl_Initialize, IDirectDrawImpl_RestoreDisplayMode, IDirectDrawImpl_SetCooperativeLevel, IDirectDrawImpl_SetDisplayMode, IDirectDrawImpl_WaitForVerticalBlank, /*** IDirectDraw2 ***/ IDirectDrawImpl_GetAvailableVidMem, /*** IDirectDraw3 ***/ IDirectDrawImpl_GetSurfaceFromDC, /*** IDirectDraw4 ***/ IDirectDrawImpl_RestoreAllSurfaces, IDirectDrawImpl_TestCooperativeLevel, IDirectDrawImpl_GetDeviceIdentifier, /*** IDirectDraw7 ***/ IDirectDrawImpl_StartModeTest, IDirectDrawImpl_EvaluateMode }; /***************************************************************************** * IDirectDrawImpl_FindDecl * * Finds the WineD3D vertex declaration for a specific fvf, and creates one * if none was found. * * This function is in ddraw.c and the DDraw object space because D3D7 * vertex buffers are created using the IDirect3D interface to the ddraw * object, so they can be valid across D3D devices(theoretically. The ddraw * object also owns the wined3d device * * Parameters: * This: Device * fvf: Fvf to find the decl for * * Returns: * NULL in case of an error, the IWineD3DVertexDeclaration interface for the * fvf otherwise. * *****************************************************************************/ IWineD3DVertexDeclaration * IDirectDrawImpl_FindDecl(IDirectDrawImpl *This, DWORD fvf) { HRESULT hr; IWineD3DVertexDeclaration* pDecl = NULL; int p, low, high; /* deliberately signed */ struct FvfToDecl *convertedDecls = This->decls; TRACE("Searching for declaration for fvf %08x... ", fvf); low = 0; high = This->numConvertedDecls - 1; while(low <= high) { p = (low + high) >> 1; TRACE("%d ", p); if(convertedDecls[p].fvf == fvf) { TRACE("found %p\n", convertedDecls[p].decl); return convertedDecls[p].decl; } else if(convertedDecls[p].fvf < fvf) { low = p + 1; } else { high = p - 1; } } TRACE("not found. Creating and inserting at position %d.\n", low); hr = IWineD3DDevice_CreateVertexDeclarationFromFVF(This->wineD3DDevice, &pDecl, (IUnknown *)This, fvf); if (hr != S_OK) return NULL; if(This->declArraySize == This->numConvertedDecls) { int grow = max(This->declArraySize / 2, 8); convertedDecls = HeapReAlloc(GetProcessHeap(), 0, convertedDecls, sizeof(convertedDecls[0]) * (This->numConvertedDecls + grow)); if(!convertedDecls) { /* This will destroy it */ IWineD3DVertexDeclaration_Release(pDecl); return NULL; } This->decls = convertedDecls; This->declArraySize += grow; } memmove(convertedDecls + low + 1, convertedDecls + low, sizeof(convertedDecls[0]) * (This->numConvertedDecls - low)); convertedDecls[low].decl = pDecl; convertedDecls[low].fvf = fvf; This->numConvertedDecls++; TRACE("Returning %p. %d decls in array\n", pDecl, This->numConvertedDecls); return pDecl; } /* IWineD3DDeviceParent IUnknown methods */ static inline struct IDirectDrawImpl *ddraw_from_device_parent(IWineD3DDeviceParent *iface) { return (struct IDirectDrawImpl *)((char*)iface - FIELD_OFFSET(struct IDirectDrawImpl, device_parent_vtbl)); } static HRESULT STDMETHODCALLTYPE device_parent_QueryInterface(IWineD3DDeviceParent *iface, REFIID riid, void **object) { struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); return IDirectDrawImpl_QueryInterface((IDirectDraw7 *)This, riid, object); } static ULONG STDMETHODCALLTYPE device_parent_AddRef(IWineD3DDeviceParent *iface) { struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); return IDirectDrawImpl_AddRef((IDirectDraw7 *)This); } static ULONG STDMETHODCALLTYPE device_parent_Release(IWineD3DDeviceParent *iface) { struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); return IDirectDrawImpl_Release((IDirectDraw7 *)This); } /* IWineD3DDeviceParent methods */ static void STDMETHODCALLTYPE device_parent_WineD3DDeviceCreated(IWineD3DDeviceParent *iface, IWineD3DDevice *device) { TRACE("iface %p, device %p\n", iface, device); } static HRESULT STDMETHODCALLTYPE device_parent_CreateSurface(IWineD3DDeviceParent *iface, IUnknown *superior, UINT width, UINT height, WINED3DFORMAT format, DWORD usage, WINED3DPOOL pool, UINT level, WINED3DCUBEMAP_FACES face, IWineD3DSurface **surface) { struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); IDirectDrawSurfaceImpl *surf = NULL; UINT i = 0; DDSCAPS2 searchcaps = This->tex_root->surface_desc.ddsCaps; TRACE("iface %p, superior %p, width %u, height %u, format %#x, usage %#x,\n" "\tpool %#x, level %u, face %u, surface %p\n", iface, superior, width, height, format, usage, pool, level, face, surface); searchcaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_ALLFACES; switch(face) { case WINED3DCUBEMAP_FACE_POSITIVE_X: TRACE("Asked for positive x\n"); if (searchcaps.dwCaps2 & DDSCAPS2_CUBEMAP) { searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEX; } surf = This->tex_root; break; case WINED3DCUBEMAP_FACE_NEGATIVE_X: TRACE("Asked for negative x\n"); searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEX; break; case WINED3DCUBEMAP_FACE_POSITIVE_Y: TRACE("Asked for positive y\n"); searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEY; break; case WINED3DCUBEMAP_FACE_NEGATIVE_Y: TRACE("Asked for negative y\n"); searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEY; break; case WINED3DCUBEMAP_FACE_POSITIVE_Z: TRACE("Asked for positive z\n"); searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEZ; break; case WINED3DCUBEMAP_FACE_NEGATIVE_Z: TRACE("Asked for negative z\n"); searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEZ; break; default: {ERR("Unexpected cube face\n");} /* Stupid compiler */ } if (!surf) { IDirectDrawSurface7 *attached; IDirectDrawSurface7_GetAttachedSurface((IDirectDrawSurface7 *)This->tex_root, &searchcaps, &attached); surf = (IDirectDrawSurfaceImpl *)attached; IDirectDrawSurface7_Release(attached); } if (!surf) ERR("root search surface not found\n"); /* Find the wanted mipmap. There are enough mipmaps in the chain */ while (i < level) { IDirectDrawSurface7 *attached; IDirectDrawSurface7_GetAttachedSurface((IDirectDrawSurface7 *)surf, &searchcaps, &attached); if(!attached) ERR("Surface not found\n"); surf = (IDirectDrawSurfaceImpl *)attached; IDirectDrawSurface7_Release(attached); ++i; } /* Return the surface */ *surface = surf->WineD3DSurface; TRACE("Returning wineD3DSurface %p, it belongs to surface %p\n", *surface, surf); return D3D_OK; } static HRESULT STDMETHODCALLTYPE device_parent_CreateRenderTarget(IWineD3DDeviceParent *iface, IUnknown *superior, UINT width, UINT height, WINED3DFORMAT format, WINED3DMULTISAMPLE_TYPE multisample_type, DWORD multisample_quality, BOOL lockable, IWineD3DSurface **surface) { struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); IDirectDrawSurfaceImpl *d3d_surface = This->d3d_target; IDirectDrawSurfaceImpl *target = NULL; TRACE("iface %p, superior %p, width %u, height %u, format %#x, multisample_type %#x,\n" "\tmultisample_quality %u, lockable %u, surface %p\n", iface, superior, width, height, format, multisample_type, multisample_quality, lockable, surface); if (d3d_surface->isRenderTarget) { IDirectDrawSurface7_EnumAttachedSurfaces((IDirectDrawSurface7 *)d3d_surface, &target, findRenderTarget); } else { target = d3d_surface; } if (!target) { target = This->d3d_target; ERR(" (%p) : No DirectDrawSurface found to create the back buffer. Using the front buffer as back buffer. Uncertain consequences\n", This); } /* TODO: Return failure if the dimensions do not match, but this shouldn't happen */ *surface = target->WineD3DSurface; target->isRenderTarget = TRUE; TRACE("Returning wineD3DSurface %p, it belongs to surface %p\n", *surface, d3d_surface); return D3D_OK; } static HRESULT STDMETHODCALLTYPE device_parent_CreateDepthStencilSurface(IWineD3DDeviceParent *iface, IUnknown *superior, UINT width, UINT height, WINED3DFORMAT format, WINED3DMULTISAMPLE_TYPE multisample_type, DWORD multisample_quality, BOOL discard, IWineD3DSurface **surface) { struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); /* Create a Depth Stencil surface to make WineD3D happy */ DDSURFACEDESC2 ddsd; HRESULT hr; TRACE("iface %p, superior %p, width %u, height %u, format %#x, multisample_type %#x,\n" "\tmultisample_quality %u, discard %u, surface %p\n", iface, superior, width, height, format, multisample_type, multisample_quality, discard, surface); *surface = NULL; /* Create a DirectDraw surface */ memset(&ddsd, 0, sizeof(ddsd)); ddsd.dwSize = sizeof(ddsd); ddsd.u4.ddpfPixelFormat.dwSize = sizeof(DDPIXELFORMAT); ddsd.dwFlags = DDSD_PIXELFORMAT | DDSD_WIDTH | DDSD_HEIGHT | DDSD_CAPS; ddsd.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN; ddsd.dwHeight = height; ddsd.dwWidth = width; if (format) { PixelFormat_WineD3DtoDD(&ddsd.u4.ddpfPixelFormat, format); } else { ddsd.dwFlags ^= DDSD_PIXELFORMAT; } This->depthstencil = TRUE; hr = IDirectDraw7_CreateSurface((IDirectDraw7 *)This, &ddsd, (IDirectDrawSurface7 **)&This->DepthStencilBuffer, NULL); This->depthstencil = FALSE; if(FAILED(hr)) { ERR(" (%p) Creating a DepthStencil Surface failed, result = %x\n", This, hr); return hr; } *surface = This->DepthStencilBuffer->WineD3DSurface; return D3D_OK; } static HRESULT STDMETHODCALLTYPE device_parent_CreateVolume(IWineD3DDeviceParent *iface, IUnknown *superior, UINT width, UINT height, UINT depth, WINED3DFORMAT format, WINED3DPOOL pool, DWORD usage, IWineD3DVolume **volume) { TRACE("iface %p, superior %p, width %u, height %u, depth %u, format %#x, pool %#x, usage %#x, volume %p\n", iface, superior, width, height, depth, format, pool, usage, volume); ERR("Not implemented!\n"); return E_NOTIMPL; } static HRESULT STDMETHODCALLTYPE device_parent_CreateSwapChain(IWineD3DDeviceParent *iface, WINED3DPRESENT_PARAMETERS *present_parameters, IWineD3DSwapChain **swapchain) { struct IDirectDrawImpl *This = ddraw_from_device_parent(iface); IDirectDrawSurfaceImpl *iterator; IParentImpl *object; HRESULT hr; TRACE("iface %p, present_parameters %p, swapchain %p\n", iface, present_parameters, swapchain); object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(IParentImpl)); if (!object) { FIXME("Allocation of memory failed\n"); *swapchain = NULL; return DDERR_OUTOFVIDEOMEMORY; } object->lpVtbl = &IParent_Vtbl; object->ref = 1; hr = IWineD3DDevice_CreateSwapChain(This->wineD3DDevice, present_parameters, swapchain, (IUnknown *)object, This->ImplType); if (FAILED(hr)) { FIXME("(%p) CreateSwapChain failed, returning %#x\n", iface, hr); HeapFree(GetProcessHeap(), 0 , object); *swapchain = NULL; return hr; } object->child = (IUnknown *)*swapchain; This->d3d_target->wineD3DSwapChain = *swapchain; iterator = This->d3d_target->complex_array[0]; while (iterator) { iterator->wineD3DSwapChain = *swapchain; iterator = iterator->complex_array[0]; } return hr; } const IWineD3DDeviceParentVtbl ddraw_wined3d_device_parent_vtbl = { /* IUnknown methods */ device_parent_QueryInterface, device_parent_AddRef, device_parent_Release, /* IWineD3DDeviceParent methods */ device_parent_WineD3DDeviceCreated, device_parent_CreateSurface, device_parent_CreateRenderTarget, device_parent_CreateDepthStencilSurface, device_parent_CreateVolume, device_parent_CreateSwapChain, };