/* ASPI definitions used for both WNASPI16 and WNASPI32 */ #ifndef __WINE_ASPI_H #define __WINE_ASPI_H #include "windef.h" #include "pshpack1.h" #define SS_PENDING 0x00 #define SS_COMP 0x01 #define SS_ABORTED 0x02 #define SS_ERR 0x04 #define SS_INVALID_HA 0x81 #define SS_INVALID_SRB 0xe0 #define SS_OLD_MANAGE 0xe1 #define SS_ILLEGAL_MODE 0xe2 #define SS_NO_ASPI 0xe3 #define SS_FAILED_INIT 0xe4 #define SS_ASPI_IS_BUSY 0xe5 #define SS_BUFFER_TO_BIG 0xe6 #define SC_HA_INQUIRY 0x00 #define SC_GET_DEV_TYPE 0x01 #define SC_EXEC_SCSI_CMD 0x02 #define SC_ABORT_SRB 0x03 #define SC_RESET_DEV 0x04 /* Host adapter status codes */ #define HASTAT_OK 0x00 #define HASTAT_SEL_TO 0x11 #define HASTAT_DO_DU 0x12 #define HASTAT_BUS_FREE 0x13 #define HASTAT_PHASE_ERR 0x14 /* Target status codes */ #define STATUS_GOOD 0x00 #define STATUS_CHKCOND 0x02 #define STATUS_BUSY 0x08 #define STATUS_RESCONF 0x18 #ifdef linux /* This is a duplicate of the sg_header from /usr/src/linux/include/scsi/sg.h * kernel 2.0.30 * This will probably break at some point, but for those who don't have * kernels installed, I think this should still work. * */ struct sg_header { int pack_len; /* length of incoming packet <4096 (including header) */ int reply_len; /* maximum length <4096 of expected reply */ int pack_id; /* id number of packet */ int result; /* 0==ok, otherwise refer to errno codes */ unsigned int twelve_byte:1; /* Force 12 byte command length for group 6 & 7 commands */ unsigned int other_flags:31; /* for future use */ unsigned char sense_buffer[16]; /* used only by reads */ /* command follows then data for command */ }; #define SCSI_OFF sizeof(struct sg_header) #endif #define ASPI_POSTING(prb) (prb->SRB_Flags & 0x1) #define HOST_TO_TARGET(prb) (((prb->SRB_Flags>>3) & 0x3) == 0x2) #define TARGET_TO_HOST(prb) (((prb->SRB_Flags>>3) & 0x3) == 0x1) #define NO_DATA_TRANSFERED(prb) (((prb->SRB_Flags>>3) & 0x3) == 0x3) #define SRB_ENABLE_RESIDUAL_COUNT 0x4 #define SRB_EVENT_NOTIFY 0x40 /* Enable ASPI event notification */ #define INQUIRY_VENDOR 8 #define MUSTEK_SCSI_AREA_AND_WINDOWS 0x04 #define MUSTEK_SCSI_READ_SCANNED_DATA 0x08 #define MUSTEK_SCSI_GET_IMAGE_STATUS 0x0f #define MUSTEK_SCSI_ADF_AND_BACKTRACE 0x10 #define MUSTEK_SCSI_CCD_DISTANCE 0x11 #define MUSTEK_SCSI_START_STOP 0x1b #define CMD_TEST_UNIT_READY 0x00 #define CMD_REQUEST_SENSE 0x03 #define CMD_INQUIRY 0x12 /* scanner commands - just for debug */ #define CMD_SCAN_GET_DATA_BUFFER_STATUS 0x34 #define CMD_SCAN_GET_WINDOW 0x25 #define CMD_SCAN_OBJECT_POSITION 0x31 #define CMD_SCAN_READ 0x28 #define CMD_SCAN_RELEASE_UNIT 0x17 #define CMD_SCAN_RESERVE_UNIT 0x16 #define CMD_SCAN_SCAN 0x1b #define CMD_SCAN_SEND 0x2a #define CMD_SCAN_CHANGE_DEFINITION 0x40 #define INQURIY_CMDLEN 6 #define INQURIY_REPLY_LEN 96 #define INQUIRY_VENDOR 8 #define SENSE_BUFFER(prb) (&prb->CDBByte[prb->SRB_CDBLen]) /* Just a container for seeing what devices are open */ struct ASPI_DEVICE_INFO { struct ASPI_DEVICE_INFO * next; int fd; int hostId; int target; int lun; }; typedef struct ASPI_DEVICE_INFO ASPI_DEVICE_INFO; #include "poppack.h" #endif