Details of Wine's Low-level Implementation... Written by &name-juergen-schmied; &email-juergen-schmied; (Extracted from wine/documentation/internal-dll) This document describes some points you should know before implementing the internal counterparts to external DLL's. Only 32 bit DLL's are considered. This is the way to do some initializing when a process or thread is attached to the dll. The function name is taken from a *.spec file line: init YourFunctionName Then, you have to implement the function: BOOL32 WINAPI YourLibMain(HINSTANCE32 hinstDLL, DWORD fdwReason, LPVOID lpvReserved) { if (fdwReason==DLL_PROCESS_ATTACH) { ... } .... } The problem here is, that you can't know if you have to call the function from the internal or the external DLL. If you just call the function you will get the internal implementation. If the external DLL is loaded the executed program will use the external DLL and you the internal one. When you -as an example- fill an iconlist placed in the internal DLL the application won't get the icons from the external DLL. To work around this, you should always use a pointer to call such functions: /* definition of the pointer type*/ void (CALLBACK* pDLLInitComctl)(); /* getting the function address this should be done in the LibMain function when called with DLL_PROCESS_ATTACH*/ BOOL32 WINAPI Shell32LibMain(HINSTANCE32 hinstDLL, DWORD fdwReason, LPVOID lpvReserved) { HINSTANCE32 hComctl32; if (fdwReason==DLL_PROCESS_ATTACH) { /* load the external / internal DLL*/ hComctl32 = LoadLibrary32A("COMCTL32.DLL"); if (hComctl32) { /* get the function pointer */ pDLLInitComctl=GetProcAddress32(hComctl32,"InitCommonControlsEx"); /* check it */ if (pDLLInitComctl) { /* use it */ pDLLInitComctl(); } /* free the DLL / decrease the ref count */ FreeLibrary32(hComctl32); } else { /* do some panic*/ ERR(shell,"P A N I C error getting functionpointers\n"); exit (1); } } .... < If you know how, write some lines> Findings researched by Uwe Bonnes, Ulrich Weigand and Marcus Meissner. (Extracted from wine/documentation/accelerators) Some notes concerning accelerators. There are three differently sized accelerator structures exposed to the user. The general layout is: BYTE fVirt; WORD key; WORD cmd; We now have three different appearances: Accelerators in NE resources. These have a size of 5 byte and do not have any padding. This is also the internal layout of the global handle HACCEL (16 and 32) in Windows 95 and WINE. Exposed to the user as Win16 global handles HACCEL16 and HACCEL32 by the Win16/Win32 API. Accelerators in PE resources. These have a size of 8 byte. Layout is: BYTE fVirt; BYTE pad0; WORD key; WORD cmd; WORD pad1; They are exposed to the user only by direct accessing PE resources. Accelerators in the Win32 API. These have a size of 6 bytes. Layout is: BYTE fVirt; BYTE pad0; WORD key; WORD cmd; These are exposed to the user by the CopyAcceleratorTable and CreateAcceleratorTable functions in the Win32 API. Why two types of accelerators in the Win32 API? We can only guess, but my best bet is that the Win32 resource compiler can/does not handle struct packing. Win32 ACCEL is defined using #pragma(2) for the compiler but without any packing for RC, so it will assume #pragma(4). Written by (???) (Extracted from wine/documentation/filehandles) DOS treats the first 5 file handles as special cases. They map directly to stdin, stdout, stderr, stdaux and stdprn. Windows 16 inherits this behavior, and in fact, win16 handles are interchangable with DOS handles. Some nasty windows programs even do this! Windows32 issues file handles starting from 1, on the grounds that most GUI processes don't need a stdin, stdout, etc. The Wine handle code is implemented in the Win32 style, and the Win16 functions use two macros to convert to and from the two types. The macros are defined in file.h as follows: #define HFILE16_TO_HFILE32(handle) \ (((handle)==0) ? GetStdHandle(STD_INPUT_HANDLE) : \ ((handle)==1) ? GetStdHandle(STD_OUTPUT_HANDLE) : \ ((handle)==2) ? GetStdHandle(STD_ERROR_HANDLE) : \ ((handle)>0x400) ? handle : \ (handle)-5) #define HFILE32_TO_HFILE16(handle) ({ HFILE32 hnd=handle; \ ((hnd==HFILE_ERROR32) ? HFILE_ERROR16 : \ ((handle>0x400) ? handle : \ (HFILE16)hnd+5); }) Be careful not to use the macro HFILE16_TO_HFILE32 on functions with side-effects, as it will cause them to be evaluated several times. This could be considered a bug, but the use of this macro is limited enough not to need a rewrite. The 0x400 special case above deals with LZW filehandles (see misc/lzexpand.c). Written by &name-jonathan-buzzard; &email-jonathan-buzzard; (Extracted from wine/documentation/ioport-trace-hints) The primary reason to do this is to reverse engineer a hardware device for which you don't have documentation, but can get to work under Wine. This lot is aimed at parallel port devices, and in particular parallel port scanners which are now so cheap they are virtually being given away. The problem is that few manufactures will release any programming information which prevents drivers being written for Sane, and the traditional technique of using DOSemu to produce the traces does not work as the scanners invariably only have drivers for Windows. Please note that I have not been able to get my scanner working properly (a UMAX Astra 600P), but a couple of people have reported success with at least the Artec AS6e scanner. I am not in the process of developing any driver nor do I intend to, so don't bug me about it. My time is now spent writing programs to set things like battery save options under Linux on Toshiba laptops, and as such I don't have any spare time for writing a driver for a parallel port scanner etc. Presuming that you have compiled and installed wine the first thing to do is is to enable direct hardware access to your parallel port. To do this edit wine.conf (usually in /usr/local/etc) and in the ports section add the following two lines read=0x378,0x379,0x37a,0x37c,0x77a write=0x378,x379,0x37a,0x37c,0x77a This adds the necessary access required for SPP/PS2/EPP/ECP parallel port on LPT1. You will need to adjust these number accordingly if your parallel port is on LPT2 or LPT0. When starting wine use the following command line, where XXXX is the program you need to run in order to access your scanner, and YYYY is the file your trace will be stored in: wine -debugmsg +io XXXX 2> >(sed 's/^[^:]*:io:[^ ]* //' > YYYY) You will need large amounts of hard disk space (read hundreds of megabytes if you do a full page scan), and for reasonable performance a really fast processor and lots of RAM. You might well find the log compression program that David Campbell campbell@torque.net wrote helpful in reducing the size of the log files. This can be obtained by the following command: sh ioport-trace-hints This should extract shrink.c (which is located at the end of this file. Compile the log compression program by: cc shrink.c -o shrink Use the shrink program to reduce the physical size of the raw log as follows: cat log | shrink > log2 The trace has the basic form of XXXX > YY @ ZZZZ:ZZZZ where XXXX is the port in hexidecimal being accessed, YY is the data written (or read) from the port, and ZZZZ:ZZZZ is the address in memory of the instruction that accessed the port. The direction of the arrow indicates whether the data was written or read from the port. > data was written to the port < data was read from the port My basic tip for interperating these logs is to pay close attention to the addresses of the IO instructions. Their grouping and sometimes proximity should reveal the presence of subroutines in the driver. By studying the different versions you should be able to work them out. For example consider the following section of trace from my UMAX Astra 600P 0x378 > 55 @ 0297:01ec 0x37a > 05 @ 0297:01f5 0x379 < 8f @ 0297:01fa 0x37a > 04 @ 0297:0211 0x378 > aa @ 0297:01ec 0x37a > 05 @ 0297:01f5 0x379 < 8f @ 0297:01fa 0x37a > 04 @ 0297:0211 0x378 > 00 @ 0297:01ec 0x37a > 05 @ 0297:01f5 0x379 < 8f @ 0297:01fa 0x37a > 04 @ 0297:0211 0x378 > 00 @ 0297:01ec 0x37a > 05 @ 0297:01f5 0x379 < 8f @ 0297:01fa 0x37a > 04 @ 0297:0211 0x378 > 00 @ 0297:01ec 0x37a > 05 @ 0297:01f5 0x379 < 8f @ 0297:01fa 0x37a > 04 @ 0297:0211 0x378 > 00 @ 0297:01ec 0x37a > 05 @ 0297:01f5 0x379 < 8f @ 0297:01fa 0x37a > 04 @ 0297:0211 As you can see there is a repeating structure starting at address 0297:01ec that consists of four io accesses on the parallel port. Looking at it the first io access writes a changing byte to the data port the second always writes the byte 0x05 to the control port, then a value which always seems to 0x8f is read from the status port at which point a byte 0x04 is written to the control port. By studying this and other sections of the trace we can write a C routine that emulates this, shown below with some macros to make reading/writing on the parallel port easier to read. #define r_dtr(x) inb(x) #define r_str(x) inb(x+1) #define r_ctr(x) inb(x+2) #define w_dtr(x,y) outb(y, x) #define w_str(x,y) outb(y, x+1) #define w_ctr(x,y) outb(y, x+2) /* * Seems to be sending a command byte to the scanner * */ int udpp_put(int udpp_base, unsigned char command) { int loop,value; w_dtr(udpp_base, command); w_ctr(udpp_base, 0x05); for (loop=0;loop<10;loop++) if (((value=r_str(udpp_base)) & 0x80)!=0x00) { w_ctr(udpp_base, 0x04); return value & 0xf8; } return (value & 0xf8) | 0x01; } For the UMAX Astra 600P only seven such routines exist (well 14 really, seven for SPP and seven for EPP). Whether you choose to disassemble the driver at this point to verify the routines is your own choice. If you do, the address from the trace should help in locating them in the disassembly. You will probably then find it useful to write a script/perl/C program to analyse the logfile and decode them futher as this can reveal higher level grouping of the low level routines. For example from the logs from my UMAX Astra 600P when decoded futher reveal (this is a small snippet) start: put: 55 8f put: aa 8f put: 00 8f put: 00 8f put: 00 8f put: c2 8f wait: ff get: af,87 wait: ff get: af,87 end: cc start: put: 55 8f put: aa 8f put: 00 8f put: 03 8f put: 05 8f put: 84 8f wait: ff From this it is easy to see that put routine is often grouped together in five successive calls sending information to the scanner. Once these are understood it should be possible to process the logs further to show the higher level routines in an easy to see format. Once the highest level format that you can derive from this process is understood, you then need to produce a series of scans varying only one parameter between them, so you can discover how to set the various parameters for the scanner. The following is the shrink.c program. cat > shrink.c <<EOF #include <stdio.h> #include <string.h> void main (void) { char buff[256], lastline[256]; int count; count = 0; lastline[0] = 0; while (!feof (stdin)) { fgets (buff, sizeof (buff), stdin); if (strcmp (buff, lastline) == 0) { count++; } else { if (count > 1) fprintf (stdout, "# Last line repeated %i times #\n", count); fprintf (stdout, "%s", buff); strcpy (lastline, buff); count = 1; } } } EOF