This file contains information about the implementation of the multimedia layer of Wine. The implementation can be found in the dlls/winmm/ directory (and in many of its subdirectories), but also in dlls/msacm/ (for the audio compression/decompression manager) and dlls/msvideo/ (for the video compression/decompression manager). Written by &name-eric-pouech; &email-eric-pouech; (Last updated: 02/16/2001) The multimedia stuff is split into 3 layers. The low level (device drivers), mid level (MCI commands) and high level abstraction layers. The low level layer has also some helper DLLs (like the MSACM/MSACM32 and MSVIDEO/MSVFW32 pairs). The low level layer may depend on current hardware and OS services (like OSS on Unix). Mid level (MCI) and high level layers must be written independently from the hardware and OS services. There are two specific low level drivers (one for wave input/output, another one for MIDI output only), whose role is: help choosing one low level driver between many add the possibility to convert streams (ie ADPCM => PCM) add the possibility to filter a stream (adding echo, equalizer... to a wave stream), or modify the instruments that have to be played (MIDI). All of those components are defined as DLLs (one by one). Please note that native low level drivers are not currently supported in Wine, because they either access hardware components or require VxDs to be loaded; Wine does not correctly supports those two so far. The following low level layers are implemented (as built-in DLLs): MMSYSTEM and WINMM call the real low level audio driver using the wodMessage/widMessage which handles the different requests. The low level audio driver is currently only implemented for the OpenSoundSystem (OSS) as supplied in the Linux and FreeBSD kernels by 4Front Technologies. The presence of this driver is checked by configure (depends on the <sys/soundcard.h> file). Source code resides in dlls/winmm/wineoss/audio.c. The implementation contains all features commonly used, but has several problems (see TODO list). Note that some Wine specific flag has been added to the wodOpen function, so that the dsound DLL can share the /dev/dsp access. Currently, this only provides mutual exclusion for both DLLs. Future extension could add a virtual mixer between the two output streams. TODO: verify all functions for correctness Add virtual mixer between wave-out and dsound interfaces. No other is available. Could think of Sun Audio, remote audio systems (using X extensions, ...), ALSA, EsounD, ArTs... MMSYSTEM and WINMM call the low level driver functions using the midMessage and the modMessage functions. The low level audio driver is currently only implemented for the OpenSoundSystem (OSS) as supplied in the Linux and FreeBSD kernels by 4Front Technologies. The presence of this driver is checked by configure (depends on the <sys/soundcard.h> file, and also some specific defines because MIDI is not supported on all OSes by OSS). Source code resides in dlls/winmm/wineoss/midi.c Both Midi in and Midi out are provided. The type of MIDI devices supported is external MIDI port (requires an MIDI capable device - keyboard...) and OPL/2 synthesis (the OPL/2 patches for all instruments are in midiPatch.c). TODO: use better instrument definition for OPL/2 (midiPatch.c) or use existing instrument definition (from playmidi or kmid) with a .winerc option have a look at OPL/3 ? implement asynchronous playback of MidiHdr implement STREAM'ed MidiHdr (question: how shall we share the code between the midiStream functions in MMSYSTEM/WINMM and the code for the low level driver) use a more accurate read mechanism than the one of snooping on timers (like select on fd) Could support other MIDI implementation for other sub systems (any idea here ?) Could also implement a software synthesizer, either inside Wine or using using MIDI loop back devices in an external program (like timidity). The only trouble is that timidity is GPL'ed... MMSYSTEM and WINMM call the low level driver functions using the mxdMessage function. The current implementation uses the OpenSoundSystem mixer, and resides in dlls/winmm/wineoss/mixer.c TODO: implement notification mechanism when state of mixer's controls change TODO: implement mixing low level drivers for other mixers (ALSA...) The AUX low level driver is the predecessor of the mixer driver (introduced in Win 95). The implementation uses the OSS mixer API, and is incomplete. TODO: verify the implementation check with what is done in mixer open question: shall we implement it on top of the low level mixer functions ? All the OSS dependent functions are stored into the WineOSS DLL. It still lack a correct installation scheme (as any multimedia device under Windows), so that all the correct keys are created in the registry. This requires an advanced model since, for example, the number of wave out devices can only be known on the destination system (depends on the sound card driven by the OSS interface). A solution would be to install all the multimedia drivers through the SETUPX DLL; this is not doable yet (the multimedia extension to SETUPX isn't written yet). The API consists of the joy* functions found in dlls/winmm/joystick/joystick.c. The implementation currently uses the Linux joystick device driver API. It is lacking support for enhanced joysticks and has not been extensively tested. TODO: better support of enhanced joysticks (Linux 2.2 interface is available) support more joystick drivers (like the XInput extension) should load joystick DLL as any other driver (instead of hardcoding) the driver's name, and load it as any low lever driver. The Wave mapper device allows to load on-demand codecs in order to perform software conversion for the types the actual low level driver (hardware). Those codecs are provided through the standard ACM drivers. A first working implementation for wave out as been provided (wave in exists, but doesn't allow conversion). Wave mapper driver implementation can be found in dlls/winmm/wavemap/ directory. This driver heavily relies on MSACM and MSACM32 DLLs which can be found in dlls/msacm and dlls/msacm32. Those DLLs load ACM drivers which provide the conversion to PCM format (which is normally supported by low level drivers). ADPCM, MP3... fit into the category of non PCM formats. There is currently no built-in ACM driver in Wine, so you must use native ones if you're looking for non PCM playback. TODO: check for correctness and robustness Seems to work quite ok (using of course native MSACM/MSACM32 DLLs) Some other testings report some issues while reading back the registry settings. Midi mapper allows to map each one of 16 MIDI channels to a specific instrument on an installed sound card. This allows for example to support different MIDI instrument definition (XM, GM...). It also permits to output on a per channel basis to different MIDI renderers. A built-in MIDI mapper can be found in dlls/winmm/midimap/. It partly provides the same functionnality as the Windows' one. It allows to pick up destination channels (you can map a given channel to a specific playback device channel (see the configuration bits for more details). TODO: implement the Midi mapper features (instrument on the fly modification) if it has to be done as under Windows, it required parsing the midi configuration files (didn't find yet the specs) The native midimapper from Win 98 works, but it requires a bunch of keys in the registry which are not part of the Wine source yet. TODO: add native midimapper keys to the registry to let it run. This will require proper multimedia driver installation routines. The mid level drivers are represented by some common API functions, mostly mciSendCommand and mciSendString. See status in chapter 3 for more information. Wine implements several MCI mid level drivers (status is given for both built-in and native implementation): TODO: (apply to all built-in MCI drivers) use MMSYSTEM multitasking caps instead of the home grown The currently best implementation is the MCI CDAUDIO driver that can be found in dlls/winmm/mcicda/mcicda.c. The implementation is mostly complete, there have been no reports of errors. It makes use of misc/cdrom.c Wine internal cdrom interface. This interface has been ported on Linux, FreeBSD and NetBSD. (Sun should be similar, but are not implemented.) A very small example of a cdplayer consists just of the line mciSendString("play cdaudio",NULL,0,0); TODO: add support for other cdaudio drivers (Solaris...) add support for multiple cdaudio devices (plus a decent configuration scheme) The DLL is not cleanly separated from the NTDLL DLL. The CDROM interface should be exported someway (or stored in a Wine only DLL) Native MCICDA works also correctly... It uses the MSCDEX traps (on int 2f). However, some commands (like seeking) seem to be broken. The implementation is rather complete and can be found in dlls/winmm/mciwave/audio.c. It uses the low level audio API (although not abstracted correctly). FIXME: The MCI_STATUS command is broken. TODO: check for correctness better use of asynchronous playback from low level better implement non waiting command (without the MCI_WAIT flag). Native MCIWAVE works also correctly. The implementation can be found in dlls/winmm/mciseq/mcimidi.c. Except from the Record command, should be close to completion (except for non blocking commands, as many MCI drivers). TODO: implement it correctly finish asynchronous commands (especially for reading/record) better implement non waiting command (without the MCI_WAIT flag). implement the recording features Native MCIMIDI has been working but is currently blocked by scheduling issues (mmTaskXXX no longer work). FIXME: midiStreamPlay get from time to time an incorrect MidiHdr when using the native MCI sequencer The implementation is in dlls/winmm/mcianim/. TODO: implement it, probably using xanim or something similar. Native MCIANIM is reported to work (but requires native video DLLs also, even though the built-in video DLLs start to work correctly). The implementation is in dlls/winmm/mcianim/. Basic features are present, simple playing is available, even if lots remain to be done. It rather heavily relies on MSVIDEO/MSVFW32 DLLs pair to work. TODO: finish the implementation fix the audio/video synchronisation issue Native MCIAVI is reported to work (but requires native video DLLs also). Some files exhibit some deadlock issues anyway. The rest (basically the MMSYSTEM and WINMM DLLs entry points). It also provides the skeleton for the core functionality for multimedia rendering. Note that native MMSYSTEM and WINMM do not currently work under Wine and there is no plan to support them (it would require to also fully support VxD, which is not done yet). Moreover, native DLLs require 16 bit MCI and low level drivers. Wine implements them as 32 bit drivers. MCI and low level drivers can either be 16 or 32 bit for Wine. TODO: it seems that some program check what's installed in registry against value returned by drivers. Wine is currently broken regarding this point. add clean-up mechanisms when process detaches from MM DLLs prepare for the 16/32 big split check thread-safeness for MMSYSTEM and WINMM entry points unicode entry points are badly supported Implementation of what is needed to load/unload MCI drivers, and to pass correct information to them. This is implemented in dlls/winmm/mci.c. The mciSendString function uses command strings, which are translated into normal MCI commands as used by mciSendCommand with the help of command tables. The API can be found in dlls/winmm/mmsystem.c and dlls/winmm/mci.c. The functions there (mciOpen,mciSysInfo) handle mid level driver allocation and calls. The implementation is not complete. MCI drivers are seen as regular Wine modules, and can be loaded (with a correct load order between builtin, native, so), as any other DLL. Please note, that MCI drivers module names must bear the .drv extension to be correctly understood. The list of available MCI drivers is obtained as follows: 1. key 'mci' in [option] section from .winerc (or wineconf) mci=CDAUDIO:SEQUENCER gives the list of MCI drivers (names, in uppercase only) to be used in Wine. 2. This list, when defined, supersedes the mci key in c:\windows\system.ini Note that native VIDEODISC crashes when the module is loaded, which occurs when the MCI procedures are initialised. Make sure that this is not in the list from above. Try adding: mci=CDAUDIO:SEQUENCER:WAVEAUDIO:AVIVIDEO:MPEGVIDEO to the [options] section of the wine config file. TODO: correctly handle the MCI_ALL_DEVICE_ID in functions. finish mapping 16 <=> 32 of MCI structures and commands MCI_SOUND is not handled correctly (should not be sent to MCI driver => same behavior as MCI_BREAK) implement auto-open feature (ie, when a string command is issued for a not yet opened device, MCI automatically opens it) Multi-tasking capabilities used for the MCI drivers are provided in dlls/winmm/mmsystem.c. TODO: mmTaskXXX functions are currently broken because the 16 loader does not support binary command lines => provide Wine's own mmtask.tsk not using binary command line. the Wine native MCI drivers should use the mmThreadXXX API (but since all built-in MCI drivers are 32 bit, this would require a special flag to mark 32 bit entry points) It currently uses a service thread, run in the context of the calling process, which should correctly mimic Windows behavior. TODO: Check if minimal time is satisfactory for most programs. current implementation may let a timer tick (once) after it has been destroyed The API consists of the mmio* functions found in dlls/winmm/mmio.c. Seems to work ok in most of the cases. There's some linear/segmented issues with 16 bit code. There are also some bugs when writting MMIO files. Seem to work correctly. Currently, multimedia configuration heavily relies on Win 3.x configuration model. Since all multimedia drivers (MCI, low level ones, ACM drivers, mappers) are, at first, drivers they need to appear in the [mci] or [mci32] section of the system.ini file. Since all drivers are, at first, DLLs, you can choose to load their Wine's (built-in) or Windows (native) version. A default [mci] section (in system.ini) looks like (see the note above on videodisc): [mci] cdaudio=mcicda.drv sequencer=mciseq.drv waveaudio=mciwave.drv avivideo=mciavi.drv videodisc=mcipionr.drv vcr=mcivisca.drv MPEGVideo=mciqtz.drv By default, the list of loadable MCI drivers will be made of those drivers (in the [mci] section). The list of loadable (recognized) MCI drivers can be altered in the [option] section of the wine config file, like: mci=CDAUDIO:SEQUENCER:WAVEAUDIO:AVIVIDEO:MPEGVIDEO TODO: use a default registry setting to bypass this (ugly) configuration model Configuration of low level drivers is done with the Wine configuration file. Default keys are provided in winedefault.reg. The registry keys used here differ from the Windows' one. Using the Windows' one would require implementing something equivalent to a (real) driver installation. Even if this would be necessary in a few cases (mainly using MS native multimedia) modules, there's no real need so far (or it hasn't been run into yet). See the configuration part of the User's Guide for more details. The Midi mapper configuration is the same as on Windows 9x. Under the key HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Multimedia\MIDIMap if the 'UseScheme' value is not set, or is set to a null value, the midi mapper will always use the driver identified by the 'CurrentInstrument' value. Note: Wine (for simplicity while installing) allows to define 'CurrentInstrument' as "#n" (where n is a number), whereas Windows only allows the real device name here. If UseScheme is set to a non null value, 'CurrentScheme' defines the name of the scheme to map the different channels. All the schemes are available with keys like HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Midi\Schemes\%name_of_scheme% For every scheme, under this key, will be a sub-key (which name is usually a two digit index, starting at 00). Its default value is the name of the output driver, and the value 'Channels' lists all channels (of the 16 standard MIDI ones) which have to be copied to this driver. To provide enhanced configuration and mapping capabilities, each driver can define under the key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Midi\Ports\%driver_name% a link to and .IDF file which allows to remap channels internally (for example 9 -> 16), to change instruments identification, event controlers values. See the source file dlls/winmm/midimap/midimap.c for the details (this isn't implemented yet). To be done (use the same mechanism as MCI drivers configuration). To be done (use the same mechanism as MCI drivers configuration). | Kernel space | Client applications | | | | ^ ^ | | | | | 16>| |<32 16>| |<32 16>| |<32 16>| |<32 | | v | | | v | v | +----|-----------|---------|------------|-------+ | | | | | | | WinMM.dll | | | | | | | 32 bit | +----|-----------|---------|------------|-------+ | | | | ^ | | | | +------+ | |<16 | | | |<16 | | | 16>| | | | | | | | | | v v v | | v v v | | +---------------+---+-------------+-------------+ | | | waveInXXX | | mciXXX | *playSound* | | | | waveOutXXX | | | mmioXXX | | | | midiInXXX | | | timeXXX | | | | midiOutXXX | | | driverXXX | | | | midiStreamXXX | | | | MMSystem.dll | | | mixerXXX | | | | 16 bit +--------+ | | | auxXXX +---+ +---+ mmThread| | |MMDEVLDR|<------->| joyXXX | Call back | mmTask | | +--------+ | | +-----------+-----------+---------+-------------+ ^ | | | ^ ^ | ^ | | | 16>| |<16>| 16>| |<16 v | | v | | v | +--------+ | | +-------------+ +----------+ | VxD |<------->| *.drv | | mci*.drv | +--------+ | | +--------------+ +-----------+ | | | msacm.drv | | mciwave | | | +--------------+ +-----------+ | | | midimap.drv | | mcimidi | | | +-------------+ +-----------+ | | Low-level drivers | ... | MCI drivers | | +----------+ | | | | | |<16 | +-------------------------------+ | The important points to notice are: all drivers (and most of the core code) is 16 bit all hardware (or most of it) dependant code reside in the kernel space (which is not surprising) | Kernel space | Client applications | | | | ^ ^ | | | | | 16>| |<32 16>| |<32 16>| |<32 16>| |<32 | | | | | | | | | | +------+ | | | | | | | | | |32/16>| | | | | | | | | | | v v v | | v v v v | | +---------------+---+-------------+-------------+ | | | waveInXXX | | mciXXX | *playSound* | | | | waveOutXXX | | | mmioXXX | WinMM.dll | | | midiInXXX | | | timeXXX | 32 bit | | | midiOutXXX | | | driverXXX | | | | midiStreamXXX | | | | MMSystem.dll | | | mixerXXX | | | | 16 bit | | | auxXXX +---+ +---+ mmThread| | | | | joyXXX | Call back | mmTask | | | | +-----------+-----------+---------+-------------+ | | || ^ ^ || ^^ | | 16>||<32 |<16>| 16>||<32>||<16 | | vv |<32>| vv || +---------+ | | +-------------+ +----------+ |HW driver|<------->| *.drv | | mci*.drv | +---------+ | | +--------------+ +-----------+ | | | msacm.drv | | mciwave | | | +--------------+ +-----------+ | | | midimap.drv | | mcimidi | | | +-------------+ +-----------+ | | Low-level drivers | ... | MCI drivers | | +----------+ | | | | | |<32/16 | +-------------------------------+ | From the previous drawings, the most noticeable differences are: low-level drivers can either be 16 or 32 bit MCI drivers can either be 16 or 32 bit MMSystem and WinMM will be hosted in a single elfglue library no link between the MMSystem/WinMM pair on kernel space shall exist. For example, there will be a low level driver to talk to a UNIX OSS (Open Sound System) driver all built-in drivers (low-level and MCI) will be written as 32 bit drivers all native drivers will be 16 bits drivers tbd tbd The MSACM/MSACM32 keeps some data cached for all known ACM drivers. Under the key Software\Microsoft\AudioCompressionManager\DriverCache\<driver name> are kept for values: aFormatTagCache which contains an array of DWORD. There are two DWORDs per cFormatTags entry. The first DWORD contains a format tag value, and the second the associated maximum size for a WAVEFORMATEX structure. (Fields dwFormatTag and cbFormatSize from ACMFORMATDETAILS) cFilterTags contains the number of tags supported by the driver for filtering. cFormatTags contains the number of tags support by the driver for conversions. fdwSupport (the same as the one returned from acmDriverDetails). The cFilterTags, cFormatTags, fdwSupport are the same values as the ones returned from acmDriverDetails function.