Additions to how to use Docbook under RedHat (to help beginners like

me).
Added content to the bindlls section of Winelib (based on
experience).
This commit is contained in:
Bill Medland 2001-10-02 17:48:16 +00:00 committed by Alexandre Julliard
parent a30411012c
commit e145bde61b
3 changed files with 240 additions and 5 deletions

View File

@ -201,7 +201,9 @@ SEE ALSO
with the <literal>&amp;lt;</literal> entity. Each time
the SGML processor encounters <literal>&amp;lt;</literal>,
it will place a literal <quote>&lt;</quote> in the output
document.
document. Similarly you must use the <literal>&amp;gt;</literal>
and <literal>&amp;amp;</literal> entities for the
<quote>&gt;</quote> and <quote>&amp;</quote> characters.
</para>
<para>
The final term you'll need to know when writing simple
@ -1013,6 +1015,23 @@ SEE ALSO
differently, installing it into different paths, and
naming its packages according to its own whims.
</para>
<para>
The following packages seems to be sufficient for RedHat 7.1. You
will want to be careful about the order in which you install the
rpms.
<itemizedlist>
<listitem><para>sgml-common-*.rpm</para></listitem>
<listitem><para>openjade-*.rpm</para></listitem>
<listitem><para>perl-SGMLSpm-*.rpm</para></listitem>
<listitem><para>docbook-dtd*.rpm</para></listitem>
<listitem><para>docbook-style-dsssl-*.rpm</para></listitem>
<listitem><para>tetex-*.rpm</para></listitem>
<listitem><para>jadetex-*.rpm</para></listitem>
<listitem><para>docbook-utils-*.rpm</para></listitem>
</itemizedlist>
You can also use ghostscript to view the ps format output and
Adobe Acrobat 4 to view the pdf file.
</para>
</sect3>
<sect3>

View File

@ -3,15 +3,104 @@
<sect1 id="bindlls-intro">
<title id="binary-dlls-intro.title">Introduction</title>
<para>
describe the problem,
use an example and reuse it in the following sections...
For one reason or another you may find yourself with a Linux shared
library that you want to use as if it was a Windows Dll. There are
various reasons for this including the following:
<itemizedlist>
<listitem>
<para>
You are porting a large application that uses several third-party
libraries. One is available on Linux but you are not yet ready
to link to it directly as a Linux shared library.
</para>
</listitem>
<listitem>
<para>
(The ODBC interface in WINE). There is a well-defined interface
available and there are several Linux solutions that are
available for it.
</para>
</listitem>
</itemizedlist>
</para>
<para>
The process for dealing with these situations is actually quite simple.
You need to write a spec file that will describe the library's
interface in the same format as a Dll (primarily what functions it
exports). Also you will want to write a small wrapper around the
library. We combine these to form a Wine builtin Dll that links to the
Linux library.
</para>
<para>
In this section we will look at two examples. The first example is
extremely simple and leads into the subject in "baby steps". The
second example is the ODBC interface proxy in Wine. The files to which
we will refer for the ODBC example are currently in the
<filename class="Directory">dlls/odbc32</filename> directory of the
Wine source.
</para>
<para>
The first example is based very closely on a real case (the names
of the functions etc. have been changed to protect the innocent).
A large Windows application includes a DLL that links to a third-party
DLL. For various reasons the third-party DLL does not work too well
under Wine. However the third-party DLL is also available for the
Linux environment. Conveniently the DLL and Linux shared library
export only a small number of functions and the application only uses
one of those.
</para>
<para>
Specifically, the application calls a function:
<programlisting>
signed short WINAPI MyWinFunc (unsigned short a, void *b, void *c,
unsigned long *d, void *e, unsigned char f, char g,
unsigned char *h);
</programlisting>
and the linux library exports a corresponding function:
<programlisting>
signed short MyLinuxFunc (unsigned short a, void *b, void *c,
unsigned short *d, void *e, char g, unsigned char *h);
</programlisting>
</para>
</sect1>
<sect1 id="bindlls-spec">
<title id="bindlls-spec.title">Writing the spec file</title>
<para>
give an example...
Start by writing the spec file. This file will describe the interface
as if it was a dll. See elsewhere for the details of the format of
a spec file.
</para>
<para>
In the simple example we want a Wine builtin Dll that corresponds to
the MyWin Dll. The spec file is <filename>libMyWin.spec</filename> and
looks like this.
<programlisting>
#
# File: libMyWin.spec
#
# some sort of copyright
#
# Wine spec file for the libMyWin builtin library (a minimal wrapper around the
# linux library libMyLinux)
#
# For further details of wine spec files see the Winelib documentation at
# www.winehq.com
name MyWin
type win32
mode dll
2 stdcall _MyWinFunc@32 (long ptr ptr ptr ptr long long ptr) MyProxyWinFunc
# End of file
</programlisting>
Notice that the arguments are flagged as long even though they are
smaller than that.
</para>
<para>
In the case of the ODBC example you can see this in the file
<filename>odbc32.spec</filename>.
</para>
</sect1>
@ -25,7 +114,122 @@
<sect1 id="bindlls-wrapper">
<title id="bindlls-wrapper.title">Writing the wrapper</title>
<para>
give an example
Firstly we will look at the simple example. The main complication of
this case is the slightly different argument lists. The f parameter
does not have to be passed to the Linux function and the d parameter
(theoretically) has to be converted between unsigned long * and
unsigned short *. Doing this ensures that the "high" bits of the
returned value are set correctly.
<programlisting>
/*
* File: MyWin.c
*
* Copyright (c) The copyright holder.
*
* Basic WINE wrapper for the linux &lt;3rd party library&gt; so that it can be
* used by &lt;the application&gt;
*
* Currently this file makes no attempt to be a full wrapper for the &lt;3rd
* party library&gt;; it only exports enough for our own use.
*
* Note that this is a Unix file; please don't go converting it to DOS format
* (e.g. converting line feeds to Carriage return/Line feed).
*
* This file should be built in a Wine environment as a WineLib library,
* linked to the Linux &lt;3rd party&gt; libraries (currently libxxxx.so and
* libyyyy.so)
*/
#include &lt; &lt;3rd party linux header&gt; &gt;
#include &lt;windef.h&gt; /* Part of the Wine header files */
signed short WINAPI MyProxyWinFunc (unsigned short a, void *b, void *c,
unsigned long *d, void *e, unsigned char f, char g,
unsigned char *h)
/* This declaration is as defined in the spec file. It is deliberately not
* specified in terms of &lt;3rd party&gt; types since we are messing about here
* between two operating systems (making it look like a Windows thing when
* actually it is a Linux thing). In this way the compiler will point out any
* inconsistencies.
* For example the fourth argument needs care
*/
{
unsigned short d1;
signed short ret;
d1 = (unsigned short) *d;
ret = &lt;3rd party linux function&gt; (a, b, c, &amp;d1, e, g, h);
*d = d1;
return ret;
}
/* End of file */
</programlisting>
</para>
<para>
For a more extensive case we can use the ODBC example. This is
implemented as a header file
(<filename class="HeaderFile">proxyodbc.h</filename>) and the actual
C source file (<filename>proxyodbc.c</filename>). Although the file
is quite long it is extremely simple in structure.
</para>
<para>
The MAIN_OdbcInit function is the function that was named in the
<link linkend="bindlls-spec">spec file</link> as the init function.
On the process attach event the function dynamically links to the
desired Linux ODBC library (since there are several available) and
builds a list of function pointers. It unlinks on the process
detach event.
</para>
<para>
Then each of the functions simply calls the appropriate Linux function
through the function pointer that was set up during initialisation.
</para>
</sect1>
<sect1 id="bindlls-building">
<title id="binary-dlls-building.title">Building</title>
<para>
So how dow we actually build the Wine builtin Dll? The easiest way is
to get Winemaker to do the hard work for us. For the simple example we
have two source files (the wrapper and the spec file). We also have
the 3rd party header and library files of course.
</para>
<para>
Put the two source files in a suitable directory and then use
winemaker to create the build framework, including configure script,
makefile etc. You will want to use the following options of
winemaker:
<itemizedlist>
<listitem>
<para>
--nosource-fix and --nogenerate-specs (requires winemaker version
0.5.8 or later) to ensure that the two files are not modified.
(If using an older version of winemaker then make the two files
readonly and ignore the complaints about being unable to modify
them).
</para>
</listitem>
<listitem>
<para>
--dll --single-target MyWin --nomfc to specify the target
</para>
</listitem>
<listitem>
<para>
-DMightNeedSomething -I3rd_party_include -L3rd_party_lib -lxxxx
-lyyyy where these are the locations of the header files etc.
</para>
</listitem>
</itemizedlist>
</para>
<para>
After running winemaker I like to edit the Makefile.in to add the line
CEXTRA = -Wall just before the DEFINES =.
</para>
<para>
Then simply run the configure and make as normal (described elsewhere).
</para>
</sect1>
</chapter>

View File

@ -197,6 +197,12 @@
likely, just for reference at a later point. If you use a
version control system you're already covered.
</para>
<para>
If you have already modified your source files and you want
to make sure that winemaker will not make further changes to
them then you can use the --nosource-fix option to protect
them.
</para>
</listitem>
</varlistentry>
<varlistentry>
@ -367,6 +373,12 @@
</listitem>
</itemizedlist>
</para>
<para>
If you find yourself modifying the Makefile.in to specify the
location of the Wine header or library files then go back to
the previous step (the configure script) and use the various
--with-wine-* options to specify where they are.
</para>
</listitem>
</varlistentry>
</variablelist>