Added /dev/parport support for direct port access.

configure.in

@@ -430,6 +430,19 @@ fi
 AC_SUBST(FREETYPELIBS)
 AC_SUBST(FREETYPEINCL)
 
+dnl **** Check for parport (currently Linux only) ****
+AC_CACHE_CHECK("for parport header/ppdev.h", ac_cv_c_ppdev,
+ AC_TRY_COMPILE(
+   [#include <linux/ppdev.h>],
+   [ioctl (1,PPCLAIM,0)],
+   [ac_cv_c_ppdev="yes"],
+   [ac_cv_c_ppdev="no"])
+ )
+if test "$ac_cv_c_ppdev" = "yes"
+then
+    AC_DEFINE(HAVE_PPDEV,1,[Define if we can use ppdev.h for parallel port access])
+fi
+
 dnl **** Check for IPX (currently Linux only) ****
 AC_CACHE_CHECK("for GNU style IPX support", ac_cv_c_ipx_gnu,
  AC_TRY_COMPILE(

documentation/samples/config

@@ -167,6 +167,14 @@ WINE REGISTRY Version 2
 [parallelports]
 "Lpt1" = "/dev/lp0"
 
+[ppdev]
+;; key:  io-base of the emulated port
+;; value : parport-device{,timeout}
+;; timeout for auto closing an open device ( not yet implemented)
+;"378" = "/dev/parport0"
+;"278" = "/dev/parport1"
+;"3bc" = "/dev/parport2"
+
 [spooler]
 "FILE:" = "tmp.ps"
 "LPT1:" = "|lpr"

include/config.h.in

@@ -40,9 +40,6 @@
 /* Define if the X Window System is missing or not being used.  */
 #undef X_DISPLAY_MISSING
 
-/* Define if lex declares yytext as a char * by default, not a char[].  */
-#undef YYTEXT_POINTER
-
 /* Define if .type asm directive must be inside a .def directive */
 #undef NEED_TYPE_IN_DEF
 
@@ -526,6 +523,9 @@
 /* Define if you have the xpg4 library (-lxpg4).  */
 #undef HAVE_LIBXPG4
 
+/* Define if we can use ppdev.h for parallel port access */
+#undef HAVE_PPDEV
+
 /* Set this to 64 to enable 64-bit file support on Linux */
 #undef _FILE_OFFSET_BITS
 

include/miscemu.h

@@ -249,6 +249,12 @@ extern void WINAPI XMS_Handler(CONTEXT86*);
 /* misc/aspi.c */
 extern void ASPI_DOS_HandleInt(CONTEXT86 *context);
 
+/* misc/ppdev.c */
+
+extern BOOL IO_pp_outp(int port, DWORD* res);
+extern int IO_pp_inp(int port, DWORD* res);
+extern char IO_pp_init(void);
+
 #define PTR_REAL_TO_LIN(seg,off) \
    ((void*)(((unsigned int)(seg) << 4) + LOWORD(off)))
 

msdos/Makefile.in

@@ -36,6 +36,7 @@ C_SRCS = \
 	int5c.c \
 	interrupts.c \
 	ioports.c \
+	ppdev.c \
 	vga.c \
 	vxd.c
 

msdos/ioports.c

@@ -62,13 +62,17 @@ static BYTE cmosimage[64] =
 # define DIRECT_IO_ACCESS
 #else
 # undef DIRECT_IO_ACCESS
+# undef PP_IO_ACCESS
 #endif  /* linux && __i386__ */
 
 #ifdef DIRECT_IO_ACCESS
 
 extern int iopl(int level);
-
 static char do_direct_port_access = -1;
+#ifdef HAVE_PPDEV
+static char do_pp_port_access = -1; /* -1: uninitialized, 1: not available
+				       0: available);*/
+#endif
 static char port_permissions[0x10000];
 
 #define IO_READ  1
@@ -258,6 +262,13 @@ DWORD IO_inport( int port, int size )
 
     TRACE("%d-byte value from port 0x%02x\n", size, port );
 
+#ifdef HAVE_PPDEV
+    if (do_pp_port_access == -1) 
+      do_pp_port_access =IO_pp_init();
+    if ((do_pp_port_access == 0 ) && (size == 1))
+      if (!IO_pp_inp(port,&res))
+         return res;
+#endif
 #ifdef DIRECT_IO_ACCESS
     if (do_direct_port_access == -1) IO_port_init();
     if ((do_direct_port_access)
@@ -371,7 +382,15 @@ void IO_outport( int port, int size, DWORD value )
     TRACE("IO: 0x%lx (%d-byte value) to port 0x%02x\n",
                  value, size, port );
 
+#ifdef HAVE_PPDEV
+    if (do_pp_port_access == -1) 
+      do_pp_port_access = IO_pp_init();
+    if ((do_pp_port_access == 0) && (size == 1))
+      if (!IO_pp_outp(port,&value))
+         return;
+#endif
 #ifdef DIRECT_IO_ACCESS
+
     if (do_direct_port_access == -1) IO_port_init();
     if ((do_direct_port_access)
         /* Make sure we have access to the port */

msdos/ppdev.c

@@ -0,0 +1,288 @@
+/*
+ * Parallel-port device support
+ */
+
+#include "config.h"
+
+#include "debugtools.h"
+
+DEFAULT_DEBUG_CHANNEL(int);
+
+#ifdef  HAVE_PPDEV
+
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <errno.h>
+#include <linux/ppdev.h>
+
+#include "winerror.h"
+#include "winreg.h"
+
+
+typedef struct _PPDEVICESTRUCT{
+  int fd; /* NULL if device not available */
+  char *devicename;
+  int userbase; /* where wine thinks the ports are*/
+  DWORD lastaccess; /* or NULL if release */
+  int timeout; /* time in second of inactivity to release the port*/
+} PPDeviceStruct;
+
+static PPDeviceStruct PPDeviceList[5];
+static int PPDeviceNum=0;
+
+static int IO_pp_sort(const void *p1,const  void *p2)
+{
+  return ((PPDeviceStruct*)p1)->userbase - ((PPDeviceStruct*)p2)->userbase;
+}
+
+/* IO_pp_init 
+ *
+ * Read the ppdev entries from wine.conf, open the device and check
+ * for nescessary IOCTRL
+ * Report verbose about possible errors
+ */
+char IO_pp_init(void)
+{
+    char name[80];
+    char buffer[1024];
+    HKEY hkey;
+    char temp[256];
+    int i,idx=0,fd,res,userbase,nports=0;
+    char * timeout;
+    char ret=1;
+    int lasterror;
+
+    TRACE("\n");
+    if (RegOpenKeyA( HKEY_LOCAL_MACHINE, "Software\\Wine\\Wine\\Config\\ppdev", &hkey ) != ERROR_SUCCESS)
+      return 1;
+
+    for (;;)
+    {
+        DWORD type, count = sizeof(buffer), name_len = sizeof(name);
+
+        if (RegEnumValueA( hkey, idx, name, &name_len, NULL, &type, buffer, &count )!= ERROR_SUCCESS) 
+	  break;
+	
+	idx++;
+	if(nports >4)
+	  {
+	    FIXME("Make the PPDeviceList larger then 5 elements\n");
+	    break;
+	  }
+	TRACE("Device '%s' at virtual userbase '%s'\n", buffer,name);
+	timeout = strchr(buffer,',');
+	if (timeout)
+	  *timeout++=0;
+	fd=open(buffer,O_RDWR);
+	lasterror=errno;
+	if (fd == -1)
+	  {
+	    WARN("Configuration: No access to %s Cause: %s\n",buffer,strerror(lasterror));
+	    WARN("Rejecting configuration item\n");
+	    if (lasterror == ENODEV)
+	      FIXME("Is the ppdev module loaded?\n");
+	    continue;
+	  }
+	userbase = strtol(name,(char **)NULL, 16);
+	if ( errno == ERANGE)
+	  {
+	    WARN("Configuration: Invalid base %s for %s\n",name,buffer);
+	    WARN("Rejecting configuration item\n");
+	    continue;
+	  }
+	if (ioctl (fd,PPEXCL,0)) 
+	  {
+	    ERR("PPEXCL IOCTL rejected for device %s\n",buffer);
+	    ERR("Check that PPDEV module is loaded!\n");
+	    ERR("Perhaps the device is already in use or non-existant\n");
+	    continue;
+	  }
+	if (ioctl (fd,PPCLAIM,0)) 
+	  {
+	    ERR("PPCLAIM rejected %s\n",buffer);
+	    ERR("Perhaps the device is already in use or non-existant\n");
+	    continue;
+	  }
+	if (nports > 0)
+	  {
+	    for (i=0; i<= nports; i++)
+	      {
+		if (PPDeviceList[i].userbase == userbase)
+		  {
+		    WARN("Configuration: %s uses the same virtual ports as %s\n",
+			 buffer,PPDeviceList[0].devicename);
+		    WARN("Configuration: Rejecting configuration item");
+		    userbase = 0;
+		    break;
+		  }
+	      }
+	    if (!userbase) continue;
+	  }
+	/* Check for the minimum required IOCTLS */
+	if ((ioctl(fd,PPRDATA,&res))||
+	    (ioctl(fd,PPRCONTROL,&res))||
+	    (ioctl(fd,PPRCONTROL,&res)))
+	  {
+	    ERR("PPUSER IOCTL not available for parport device %s\n",temp);
+	    continue;
+	  }
+	PPDeviceList[nports].devicename = malloc(sizeof(buffer)+1);
+	if (!PPDeviceList[nports].devicename)
+	  {
+	    ERR("No (more)space for devicename\n");
+	    break;
+	  }
+	strcpy(PPDeviceList[nports].devicename,buffer);
+	PPDeviceList[nports].fd = fd;
+	PPDeviceList[nports].userbase = userbase;
+	PPDeviceList[nports].lastaccess=GetTickCount();
+	if (timeout)
+	  {
+	    PPDeviceList[nports].timeout = strtol(timeout,(char **)NULL, 10);
+	    if (errno == ERANGE)
+	      {
+		WARN("Configuration:Invalid timeout %s in configuration for %s, Setting to 0\n",
+		     timeout,buffer);
+		PPDeviceList[nports].timeout = 0;
+	      }
+	  }
+	else
+	  PPDeviceList[nports].timeout = 0;
+	nports++;
+    }
+    TRACE("found %d ports\n",nports);
+    RegCloseKey( hkey );
+
+    PPDeviceNum= nports;
+    if (nports > 1)
+      /* sort in accending order for userbase for faster access*/
+      qsort (PPDeviceList,PPDeviceNum,sizeof(PPDeviceStruct),IO_pp_sort);
+    
+    if (nports)
+      ret=0;
+    for (idx= 0;idx<PPDeviceNum; idx++)
+      TRACE("found device %s userbase %x fd %x timeout %d\n",
+	    PPDeviceList[idx].devicename, PPDeviceList[idx].userbase,
+	    PPDeviceList[idx].fd,PPDeviceList[idx].timeout);
+    /* FIXME:
+       register a timer callback perhaps every 30 second to release unused ports
+       Set lastaccess = 0 as indicator when port was released
+    */
+    return ret;
+}
+
+/* IO_pp_do_access
+ *
+ * Do the actual IOCTL
+ * Return NULL on success
+ */
+static int IO_pp_do_access(int idx,int ppctl, DWORD* res)
+{
+    if (!PPDeviceList[idx].lastaccess)
+      /* TIMER callback has released the device after some time of inactivity
+          Reclaim the device
+          !!!!!!THIS MAY UNINTERRUPTIPLE BLOCK IF SOME OTHER DEVICE
+           !!!!!! HAS CLAIMED THE SAME PORT
+      */
+      if (ioctl(PPDeviceList[idx].fd,PPCLAIM,0))
+       {
+         ERR("Can't reclaim device %s, PPUSER/PPDEV handling confused\n",
+             PPDeviceList[idx].devicename);
+         return 1;
+       }
+    PPDeviceList[idx].lastaccess=GetTickCount();
+    return ioctl(PPDeviceList[idx].fd,ppctl,res);
+}
+
+/* IO_pp_inp
+ *
+ * Check if we can satisfy the INP command with some of the configured PPDEV deviced
+ * Return NULL on success
+ */
+int IO_pp_inp(int port, DWORD* res)
+{
+    int idx,j=0;
+    
+    for (idx=0;idx<PPDeviceNum ;idx++)
+      {
+       j = port - PPDeviceList[idx].userbase;
+       if (j <0) return 1;
+       switch (j)
+         {
+         case 0:
+           return IO_pp_do_access(idx,PPRDATA,res);
+         case 1:
+           return IO_pp_do_access(idx,PPRSTATUS,res);
+         case 2:
+           return IO_pp_do_access(idx,PPRCONTROL,res);
+         case 0x400:
+         case 0x402:
+         case 3:
+         case 4:
+         case 0x401:
+           FIXME("Port 0x%x not accessible for reading with ppdev\n",port);
+           FIXME("If this is causing problems, try direct port access\n");
+           return 1;
+         default:
+           break;
+         }
+      }
+    return 1;
+}
+
+/* IO_pp_outp
+ *
+ * Check if we can satisfy the INP command with some of the configured PPDEV deviced
+ * Return NULL on success
+ */
+BOOL IO_pp_outp(int port, DWORD* res)
+{
+    int idx,j=0;
+    
+    for (idx=0;idx<PPDeviceNum ;idx++)
+      {
+       j = port - PPDeviceList[idx].userbase;
+       if (j <0) return 1;
+       switch (j)
+         {
+         case 0:
+           return IO_pp_do_access(idx,PPWDATA,res);
+         case 2:
+           return IO_pp_do_access(idx,PPWCONTROL,res);
+         case 1:
+         case 0x400:
+         case 0x402:
+         case 3:
+         case 4:
+         case 0x401:
+           FIXME("Port %d not accessible for writing with ppdev\n",port);
+           FIXME("If this is causing problems, try direct port access\n");
+           return 1;
+         default:
+           break;
+         }
+      }
+    return TRUE;
+}
+
+
+#else /* HAVE_PPDEV */
+
+char IO_pp_init(void)
+{
+  return 1;
+}
+
+int IO_pp_inp(int port, DWORD* res)
+{
+  return 1;
+}
+
+BOOL IO_pp_outp(int port, DWORD* res)
+{
+  return TRUE;
+}
+#endif  /* HAVE_PPDEV */