Sweden-Number/dlls/winedos/int31.c

1415 lines
45 KiB
C
Raw Normal View History

/*
* DPMI 0.9 emulation
*
* Copyright 1995 Alexandre Julliard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include "config.h"
#include "wine/port.h"
#include <stdarg.h>
#include "windef.h"
#include "winbase.h"
2008-03-01 11:57:00 +01:00
#include "winternl.h"
#include "wine/winbase16.h"
#include "wownt32.h"
#include "dosexe.h"
#include "excpt.h"
#include "wine/debug.h"
#include "wine/exception.h"
WINE_DEFAULT_DEBUG_CHANNEL(int31);
/* Structure for real-mode callbacks */
typedef struct
{
DWORD edi;
DWORD esi;
DWORD ebp;
DWORD reserved;
DWORD ebx;
DWORD edx;
DWORD ecx;
DWORD eax;
WORD fl;
WORD es;
WORD ds;
WORD fs;
WORD gs;
WORD ip;
WORD cs;
WORD sp;
WORD ss;
} REALMODECALL;
typedef struct tagRMCB {
DWORD address;
DWORD proc_ofs,proc_sel;
DWORD regs_ofs,regs_sel;
struct tagRMCB *next;
} RMCB;
static RMCB *FirstRMCB = NULL;
static WORD dpmi_flag;
static void* lastvalloced = NULL;
static BYTE DPMI_retval;
/**********************************************************************
* DOSVM_IsDos32
*
* Return TRUE if we are in 32-bit protected mode DOS process.
*/
BOOL DOSVM_IsDos32(void)
{
return (dpmi_flag & 1) ? TRUE : FALSE;
}
/**********************************************************************
* alloc_pm_selector
*
* Allocate a 64k sized selector corresponding to a real mode segment.
*/
static WORD alloc_pm_selector( WORD seg, unsigned char flags )
{
WORD sel = wine_ldt_alloc_entries( 1 );
if (sel)
{
LDT_ENTRY entry;
wine_ldt_set_base( &entry, (void *)(seg << 4) );
wine_ldt_set_limit( &entry, 0xffff );
wine_ldt_set_flags( &entry, flags );
wine_ldt_set_entry( sel, &entry );
}
return sel;
}
/**********************************************************************
* dpmi_exception_handler
*
* Handle EXCEPTION_VM86_STI exceptions generated
* when there are pending asynchronous events.
*/
static LONG WINAPI dpmi_exception_handler(EXCEPTION_POINTERS *eptr)
{
2003-07-03 20:08:04 +02:00
#ifdef __i386__
EXCEPTION_RECORD *rec = eptr->ExceptionRecord;
CONTEXT *context = eptr->ContextRecord;
if (rec->ExceptionCode == EXCEPTION_VM86_STI)
{
if (ISV86(context))
ERR( "Real mode STI caught by protected mode handler!\n" );
DOSVM_SendQueuedEvents(context);
return EXCEPTION_CONTINUE_EXECUTION;
}
else if (rec->ExceptionCode == EXCEPTION_VM86_INTx)
{
if (ISV86(context))
ERR( "Real mode INTx caught by protected mode handler!\n" );
DPMI_retval = (BYTE)rec->ExceptionInformation[0];
return EXCEPTION_EXECUTE_HANDLER;
}
2003-07-03 20:08:04 +02:00
#endif
return EXCEPTION_CONTINUE_SEARCH;
}
/**********************************************************************
* INT_GetRealModeContext
*/
static void INT_GetRealModeContext( REALMODECALL *call, CONTEXT86 *context )
{
context->Eax = call->eax;
context->Ebx = call->ebx;
context->Ecx = call->ecx;
context->Edx = call->edx;
context->Esi = call->esi;
context->Edi = call->edi;
context->Ebp = call->ebp;
context->EFlags = call->fl | V86_FLAG;
context->Eip = call->ip;
context->Esp = call->sp;
context->SegCs = call->cs;
context->SegDs = call->ds;
context->SegEs = call->es;
context->SegFs = call->fs;
context->SegGs = call->gs;
context->SegSs = call->ss;
}
/**********************************************************************
* INT_SetRealModeContext
*/
static void INT_SetRealModeContext( REALMODECALL *call, CONTEXT86 *context )
{
call->eax = context->Eax;
call->ebx = context->Ebx;
call->ecx = context->Ecx;
call->edx = context->Edx;
call->esi = context->Esi;
call->edi = context->Edi;
call->ebp = context->Ebp;
call->fl = LOWORD(context->EFlags);
call->ip = LOWORD(context->Eip);
call->sp = LOWORD(context->Esp);
call->cs = context->SegCs;
call->ds = context->SegDs;
call->es = context->SegEs;
call->fs = context->SegFs;
call->gs = context->SegGs;
call->ss = context->SegSs;
}
/**********************************************************************
* DPMI_xalloc
* special virtualalloc, allocates lineary monoton growing memory.
* (the usual VirtualAlloc does not satisfy that restriction)
*/
static LPVOID DPMI_xalloc( DWORD len )
{
LPVOID ret;
LPVOID oldlastv = lastvalloced;
if (lastvalloced)
{
int xflag = 0;
ret = NULL;
while (!ret)
{
ret = VirtualAlloc( lastvalloced, len,
MEM_COMMIT|MEM_RESERVE, PAGE_EXECUTE_READWRITE );
if (!ret)
lastvalloced = (char *) lastvalloced + 0x10000;
/* we failed to allocate one in the first round.
* try non-linear
*/
if (!xflag && (lastvalloced<oldlastv))
{
/* wrapped */
FIXME( "failed to allocate linearly growing memory (%d bytes), "
"using non-linear growing...\n", len );
xflag++;
}
/* if we even fail to allocate something in the next
* round, return NULL
*/
if ((xflag==1) && (lastvalloced >= oldlastv))
xflag++;
if ((xflag==2) && (lastvalloced < oldlastv)) {
FIXME( "failed to allocate any memory of %d bytes!\n", len );
return NULL;
}
}
}
else
{
ret = VirtualAlloc( NULL, len,
MEM_COMMIT|MEM_RESERVE, PAGE_EXECUTE_READWRITE );
}
lastvalloced = (LPVOID)(((DWORD)ret+len+0xffff)&~0xffff);
return ret;
}
/**********************************************************************
* DPMI_xfree
*/
static void DPMI_xfree( LPVOID ptr )
{
VirtualFree( ptr, 0, MEM_RELEASE );
}
/**********************************************************************
* DPMI_xrealloc
*
* FIXME: perhaps we could grow this mapped area...
*/
static LPVOID DPMI_xrealloc( LPVOID ptr, DWORD newsize )
{
MEMORY_BASIC_INFORMATION mbi;
LPVOID newptr;
newptr = DPMI_xalloc( newsize );
if (ptr)
{
if (!VirtualQuery(ptr,&mbi,sizeof(mbi)))
{
FIXME( "realloc of DPMI_xallocd region %p?\n", ptr );
return NULL;
}
if (mbi.State == MEM_FREE)
{
FIXME( "realloc of DPMI_xallocd region %p?\n", ptr );
return NULL;
}
/* We do not shrink allocated memory. most reallocs
* only do grows anyway
*/
if (newsize <= mbi.RegionSize)
return ptr;
memcpy( newptr, ptr, mbi.RegionSize );
DPMI_xfree( ptr );
}
return newptr;
}
#ifdef __i386__
void DPMI_CallRMCB32(RMCB *rmcb, UINT16 ss, DWORD esp, UINT16*es, DWORD*edi)
#if 0 /* original code, which early gccs puke on */
{
int _clobber;
__asm__ __volatile__(
"pushl %%ebp\n"
"pushl %%ebx\n"
"pushl %%es\n"
"pushl %%ds\n"
"pushfl\n"
"mov %7,%%es\n"
"mov %5,%%ds\n"
".byte 0x36, 0xff, 0x18\n" /* lcall *%ss:(%eax) */
"popl %%ds\n"
"mov %%es,%0\n"
"popl %%es\n"
"popl %%ebx\n"
"popl %%ebp\n"
: "=d" (*es), "=D" (*edi), "=S" (_clobber), "=a" (_clobber), "=c" (_clobber)
: "0" (ss), "2" (esp),
"4" (rmcb->regs_sel), "1" (rmcb->regs_ofs),
"3" (&rmcb->proc_ofs) );
}
#else /* code generated by a gcc new enough */
;
__ASM_GLOBAL_FUNC(DPMI_CallRMCB32,
"pushl %ebp\n\t"
"movl %esp,%ebp\n\t"
"pushl %edi\n\t"
"pushl %esi\n\t"
"movl 0x8(%ebp),%eax\n\t"
"movl 0x10(%ebp),%esi\n\t"
"movl 0xc(%ebp),%edx\n\t"
"movl 0x10(%eax),%ecx\n\t"
"movl 0xc(%eax),%edi\n\t"
"addl $0x4,%eax\n\t"
"pushl %ebp\n\t"
"pushl %ebx\n\t"
"pushl %es\n\t"
"pushl %ds\n\t"
"pushfl\n\t"
"mov %cx,%es\n\t"
"mov %dx,%ds\n\t"
".byte 0x36, 0xff, 0x18\n\t" /* lcall *%ss:(%eax) */
"popl %ds\n\t"
"mov %es,%dx\n\t"
"popl %es\n\t"
"popl %ebx\n\t"
"popl %ebp\n\t"
"movl 0x14(%ebp),%eax\n\t"
"movw %dx,(%eax)\n\t"
"movl 0x18(%ebp),%edx\n\t"
"movl %edi,(%edx)\n\t"
"popl %esi\n\t"
"popl %edi\n\t"
"leave\n\t"
"ret")
#endif
#endif /* __i386__ */
/**********************************************************************
* DPMI_CallRMCBProc
*
* This routine does the hard work of calling a callback procedure.
*/
static void DPMI_CallRMCBProc( CONTEXT86 *context, RMCB *rmcb, WORD flag )
{
2008-03-01 11:57:00 +01:00
DWORD old_vif = get_vm86_teb_info()->dpmi_vif;
/* Disable virtual interrupts. */
2008-03-01 11:57:00 +01:00
get_vm86_teb_info()->dpmi_vif = 0;
if (wine_ldt_is_system( rmcb->proc_sel )) {
/* Wine-internal RMCB, call directly */
((RMCBPROC)rmcb->proc_ofs)(context);
} else __TRY {
#ifdef __i386__
UINT16 ss,es;
DWORD esp,edi;
INT_SetRealModeContext(MapSL(MAKESEGPTR( rmcb->regs_sel, rmcb->regs_ofs )), context);
ss = alloc_pm_selector( context->SegSs, WINE_LDT_FLAGS_DATA );
esp = context->Esp;
FIXME("untested!\n");
/* The called proc ends with an IRET, and takes these parameters:
* DS:ESI = pointer to real-mode SS:SP
* ES:EDI = pointer to real-mode call structure
* It returns:
* ES:EDI = pointer to real-mode call structure (may be a copy)
* It is the proc's responsibility to change the return CS:IP in the
* real-mode call structure. */
if (flag & 1) {
/* 32-bit DPMI client */
DPMI_CallRMCB32(rmcb, ss, esp, &es, &edi);
} else {
/* 16-bit DPMI client */
CONTEXT86 ctx = *context;
ctx.SegCs = rmcb->proc_sel;
ctx.Eip = rmcb->proc_ofs;
ctx.SegDs = ss;
ctx.Esi = esp;
ctx.SegEs = rmcb->regs_sel;
ctx.Edi = rmcb->regs_ofs;
/* FIXME: I'm pretty sure this isn't right - should push flags first */
WOWCallback16Ex( 0, WCB16_REGS, 0, NULL, (DWORD *)&ctx );
es = ctx.SegEs;
edi = ctx.Edi;
}
wine_ldt_free_entries( ss, 1 );
INT_GetRealModeContext( MapSL( MAKESEGPTR( es, edi )), context);
#else
ERR("RMCBs only implemented for i386\n");
#endif
} __EXCEPT(dpmi_exception_handler) { } __ENDTRY
/* Restore virtual interrupt flag. */
2008-03-01 11:57:00 +01:00
get_vm86_teb_info()->dpmi_vif = old_vif;
}
/**********************************************************************
* DPMI_CallRMProc
*
* This routine does the hard work of calling a real mode procedure.
*/
int DPMI_CallRMProc( CONTEXT86 *context, LPWORD stack, int args, int iret )
{
LPWORD stack16;
LPVOID addr = NULL; /* avoid gcc warning */
RMCB *CurrRMCB;
int alloc = 0, already = 0;
BYTE *code;
TRACE("EAX=%08x EBX=%08x ECX=%08x EDX=%08x\n",
context->Eax, context->Ebx, context->Ecx, context->Edx );
TRACE("ESI=%08x EDI=%08x ES=%04x DS=%04x CS:IP=%04x:%04x, %d WORD arguments, %s\n",
context->Esi, context->Edi, context->SegEs, context->SegDs,
context->SegCs, LOWORD(context->Eip), args, iret?"IRET":"FAR" );
callrmproc_again:
/* there might be some code that just jumps to RMCBs or the like,
in which case following the jumps here might get us to a shortcut */
code = CTX_SEG_OFF_TO_LIN(context, context->SegCs, context->Eip);
switch (*code) {
case 0xe9: /* JMP NEAR */
context->Eip += 3 + *(WORD *)(code+1);
/* yeah, I know these gotos don't look good... */
goto callrmproc_again;
case 0xea: /* JMP FAR */
context->Eip = *(WORD *)(code+1);
context->SegCs = *(WORD *)(code+3);
/* ...but since the label is there anyway... */
goto callrmproc_again;
case 0xeb: /* JMP SHORT */
context->Eip += 2 + *(signed char *)(code+1);
/* ...because of other gotos below, so... */
goto callrmproc_again;
}
/* shortcut for chaining to internal interrupt handlers */
if ((context->SegCs == 0xF000) && iret)
{
DOSVM_CallBuiltinHandler( context, LOWORD(context->Eip)/4 );
return 0;
}
/* shortcut for RMCBs */
CurrRMCB = FirstRMCB;
while (CurrRMCB && (HIWORD(CurrRMCB->address) != context->SegCs))
CurrRMCB = CurrRMCB->next;
if (!CurrRMCB && !MZ_Current())
{
FIXME("DPMI real-mode call using DOS VM task system, not fully tested!\n");
TRACE("creating VM86 task\n");
MZ_AllocDPMITask();
}
if (!already) {
if (!context->SegSs) {
alloc = 1; /* allocate default stack */
2005-05-10 17:22:09 +02:00
stack16 = addr = DOSMEM_AllocBlock( 64, (UINT16 *)&(context->SegSs) );
context->Esp = 64-2;
stack16 += 32-1;
if (!addr) {
ERR("could not allocate default stack\n");
return 1;
}
} else {
stack16 = CTX_SEG_OFF_TO_LIN(context, context->SegSs, context->Esp);
}
context->Esp -= (args + (iret?1:0)) * sizeof(WORD);
stack16 -= args;
if (args) memcpy(stack16, stack, args*sizeof(WORD) );
/* push flags if iret */
if (iret) {
stack16--; args++;
*stack16 = LOWORD(context->EFlags);
}
/* push return address (return to interrupt wrapper) */
*(--stack16) = DOSVM_dpmi_segments->wrap_seg;
*(--stack16) = 0;
/* adjust stack */
context->Esp -= 2*sizeof(WORD);
already = 1;
}
if (CurrRMCB) {
/* RMCB call, invoke protected-mode handler directly */
DPMI_CallRMCBProc(context, CurrRMCB, dpmi_flag);
/* check if we returned to where we thought we would */
if ((context->SegCs != DOSVM_dpmi_segments->wrap_seg) ||
(LOWORD(context->Eip) != 0)) {
/* we need to continue at different address in real-mode space,
so we need to set it all up for real mode again */
goto callrmproc_again;
}
} else {
TRACE("entering real mode...\n");
DOSVM_Enter( context );
TRACE("returned from real-mode call\n");
}
if (alloc) DOSMEM_FreeBlock( addr );
return 0;
}
/**********************************************************************
2007-02-02 15:38:45 +01:00
* CallRMInt
*/
2007-02-02 15:38:45 +01:00
static void DOSVM_CallRMInt( CONTEXT86 *context )
{
CONTEXT86 realmode_ctx;
FARPROC16 rm_int = DOSVM_GetRMHandler( BL_reg(context) );
REALMODECALL *call = CTX_SEG_OFF_TO_LIN( context,
context->SegEs,
context->Edi );
INT_GetRealModeContext( call, &realmode_ctx );
/* we need to check if a real-mode program has hooked the interrupt */
if (HIWORD(rm_int)!=0xF000) {
/* yup, which means we need to switch to real mode... */
realmode_ctx.SegCs = HIWORD(rm_int);
realmode_ctx.Eip = LOWORD(rm_int);
if (DPMI_CallRMProc( &realmode_ctx, NULL, 0, TRUE))
SET_CFLAG(context);
} else {
RESET_CFLAG(context);
/* use the IP we have instead of BL_reg, in case some apps
decide to move interrupts around for whatever reason... */
DOSVM_CallBuiltinHandler( &realmode_ctx, LOWORD(rm_int)/4 );
}
INT_SetRealModeContext( call, &realmode_ctx );
}
/**********************************************************************
2007-02-02 15:38:45 +01:00
* CallRMProc
*/
2007-02-02 15:38:45 +01:00
static void DOSVM_CallRMProc( CONTEXT86 *context, int iret )
{
REALMODECALL *p = CTX_SEG_OFF_TO_LIN( context,
context->SegEs,
context->Edi );
CONTEXT86 context16;
TRACE("RealModeCall: EAX=%08x EBX=%08x ECX=%08x EDX=%08x\n",
p->eax, p->ebx, p->ecx, p->edx);
TRACE(" ESI=%08x EDI=%08x ES=%04x DS=%04x CS:IP=%04x:%04x, %d WORD arguments, %s\n",
p->esi, p->edi, p->es, p->ds, p->cs, p->ip, CX_reg(context), iret?"IRET":"FAR" );
if (!(p->cs) && !(p->ip)) { /* remove this check
if Int21/6501 case map function
has been implemented */
SET_CFLAG(context);
return;
}
INT_GetRealModeContext(p, &context16);
DPMI_CallRMProc( &context16, ((LPWORD)MapSL(MAKESEGPTR(context->SegSs, LOWORD(context->Esp))))+3,
CX_reg(context), iret );
INT_SetRealModeContext(p, &context16);
}
/* (see dosmem.c, function DOSMEM_InitDPMI) */
static void StartPM( CONTEXT86 *context )
{
UINT16 cs, ss, ds, es;
CONTEXT86 pm_ctx;
DWORD psp_ofs = (DWORD)(DOSVM_psp<<4);
PDB16 *psp = (PDB16 *)psp_ofs;
HANDLE16 env_seg = psp->environment;
unsigned char selflags = WINE_LDT_FLAGS_DATA;
RESET_CFLAG(context);
dpmi_flag = AX_reg(context);
/* our mode switch wrapper have placed the desired CS into DX */
cs = alloc_pm_selector( context->Edx, WINE_LDT_FLAGS_CODE );
/* due to a flaw in some CPUs (at least mine), it is best to mark stack segments as 32-bit if they
can be used in 32-bit code. Otherwise, these CPUs may not set the high word of esp during a
ring transition (from kernel code) to the 16-bit stack, and this causes trouble if executing
32-bit code using this stack. */
if (dpmi_flag & 1) selflags |= WINE_LDT_FLAGS_32BIT;
ss = alloc_pm_selector( context->SegSs, selflags );
/* do the same for the data segments, just in case */
if (context->SegDs == context->SegSs) ds = ss;
else ds = alloc_pm_selector( context->SegDs, selflags );
es = alloc_pm_selector( DOSVM_psp, selflags );
/* convert environment pointer, as the spec says, but we're a bit lazy about the size here... */
psp->environment = alloc_pm_selector( env_seg, WINE_LDT_FLAGS_DATA );
pm_ctx = *context;
pm_ctx.SegCs = DOSVM_dpmi_segments->dpmi_sel;
/* our mode switch wrapper expects the new CS in DX, and the new SS in AX */
pm_ctx.Eax = ss;
pm_ctx.Edx = cs;
pm_ctx.SegDs = ds;
pm_ctx.SegEs = es;
pm_ctx.SegFs = wine_get_fs();
pm_ctx.SegGs = wine_get_gs();
pm_ctx.EFlags &= ~V86_FLAG;
TRACE("DOS program is now entering %d-bit protected mode\n",
DOSVM_IsDos32() ? 32 : 16);
__TRY
{
WOWCallback16Ex( 0, WCB16_REGS, 0, NULL, (DWORD *)&pm_ctx );
}
__EXCEPT(dpmi_exception_handler)
{
}
__ENDTRY
TRACE( "Protected mode DOS program is terminating\n" );
/*
* FIXME: Instead of calling ExitThread, we should release all
* allocated protected mode resources and call MZ_Exit
* using real mode context. See DPMI specification.
*/
ExitThread( DPMI_retval );
#if 0
wine_ldt_free_entries( psp->environment, 1 );
psp->environment = env_seg;
wine_ldt_free_entries(es,1);
if (ds != ss) wine_ldt_free_entries(ds,1);
wine_ldt_free_entries(ss,1);
wine_ldt_free_entries(cs,1);
#endif
}
static RMCB *DPMI_AllocRMCB( void )
{
RMCB *NewRMCB = HeapAlloc(GetProcessHeap(), 0, sizeof(RMCB));
UINT16 uParagraph;
if (NewRMCB)
{
2005-05-10 17:22:09 +02:00
LPVOID RMCBmem = DOSMEM_AllocBlock(4, &uParagraph);
LPBYTE p = RMCBmem;
*p++ = 0xcd; /* RMCB: */
*p++ = 0x31; /* int $0x31 */
/* it is the called procedure's task to change the return CS:EIP
the DPMI 0.9 spec states that if it doesn't, it will be called again */
*p++ = 0xeb;
*p++ = 0xfc; /* jmp RMCB */
NewRMCB->address = MAKELONG(0, uParagraph);
NewRMCB->next = FirstRMCB;
FirstRMCB = NewRMCB;
}
return NewRMCB;
}
FARPROC16 WINAPI DPMI_AllocInternalRMCB( RMCBPROC proc )
{
RMCB *NewRMCB = DPMI_AllocRMCB();
if (NewRMCB) {
NewRMCB->proc_ofs = (DWORD)proc;
NewRMCB->proc_sel = 0;
NewRMCB->regs_ofs = 0;
NewRMCB->regs_sel = 0;
return (FARPROC16)(NewRMCB->address);
}
return NULL;
}
static int DPMI_FreeRMCB( DWORD address )
{
RMCB *CurrRMCB = FirstRMCB;
RMCB *PrevRMCB = NULL;
while (CurrRMCB && (CurrRMCB->address != address))
{
PrevRMCB = CurrRMCB;
CurrRMCB = CurrRMCB->next;
}
if (CurrRMCB)
{
if (PrevRMCB)
PrevRMCB->next = CurrRMCB->next;
else
FirstRMCB = CurrRMCB->next;
2002-08-30 02:03:25 +02:00
DOSMEM_FreeBlock(PTR_REAL_TO_LIN(SELECTOROF(CurrRMCB->address),OFFSETOF(CurrRMCB->address)));
HeapFree(GetProcessHeap(), 0, CurrRMCB);
return 0;
}
return 1;
}
void WINAPI DPMI_FreeInternalRMCB( FARPROC16 proc )
{
DPMI_FreeRMCB( (DWORD)proc );
}
/**********************************************************************
* DOSVM_RawModeSwitchHandler
*
* DPMI Raw Mode Switch handler
*/
void WINAPI DOSVM_RawModeSwitchHandler( CONTEXT86 *context )
{
CONTEXT86 rm_ctx;
int ret;
/* initialize real-mode context as per spec */
memset(&rm_ctx, 0, sizeof(rm_ctx));
rm_ctx.SegDs = AX_reg(context);
rm_ctx.SegEs = CX_reg(context);
rm_ctx.SegSs = DX_reg(context);
rm_ctx.Esp = context->Ebx;
rm_ctx.SegCs = SI_reg(context);
rm_ctx.Eip = context->Edi;
rm_ctx.Ebp = context->Ebp;
rm_ctx.SegFs = 0;
rm_ctx.SegGs = 0;
/* Copy interrupt state. */
2008-03-01 11:57:00 +01:00
if (get_vm86_teb_info()->dpmi_vif)
rm_ctx.EFlags = V86_FLAG | VIF_MASK;
else
rm_ctx.EFlags = V86_FLAG;
/* enter real mode again */
TRACE("re-entering real mode at %04x:%04x\n",rm_ctx.SegCs,rm_ctx.Eip);
ret = DOSVM_Enter( &rm_ctx );
/* when the real-mode stuff call its mode switch address,
DOSVM_Enter will return and we will continue here */
if (ret<0) {
ERR("Sync lost!\n");
/* if the sync was lost, there's no way to recover */
ExitProcess(1);
}
/* alter protected-mode context as per spec */
context->SegDs = LOWORD(rm_ctx.Eax);
context->SegEs = LOWORD(rm_ctx.Ecx);
context->SegSs = LOWORD(rm_ctx.Edx);
context->Esp = rm_ctx.Ebx;
context->SegCs = LOWORD(rm_ctx.Esi);
context->Eip = rm_ctx.Edi;
context->Ebp = rm_ctx.Ebp;
context->SegFs = 0;
context->SegGs = 0;
/* Copy interrupt state. */
if (rm_ctx.EFlags & VIF_MASK)
2008-03-01 11:57:00 +01:00
get_vm86_teb_info()->dpmi_vif = 1;
else
2008-03-01 11:57:00 +01:00
get_vm86_teb_info()->dpmi_vif = 0;
/* Return to new address and hope that we didn't mess up */
TRACE("re-entering protected mode at %04x:%08x\n",
context->SegCs, context->Eip);
}
/**********************************************************************
2007-02-02 15:38:45 +01:00
* AllocRMCB
*/
2007-02-02 15:38:45 +01:00
static void DOSVM_AllocRMCB( CONTEXT86 *context )
{
RMCB *NewRMCB = DPMI_AllocRMCB();
TRACE("Function to call: %04x:%04x\n", (WORD)context->SegDs, SI_reg(context) );
if (NewRMCB)
{
NewRMCB->proc_ofs = DOSVM_IsDos32() ? context->Esi : LOWORD(context->Esi);
NewRMCB->proc_sel = context->SegDs;
NewRMCB->regs_ofs = DOSVM_IsDos32() ? context->Edi : LOWORD(context->Edi);
NewRMCB->regs_sel = context->SegEs;
SET_CX( context, HIWORD(NewRMCB->address) );
SET_DX( context, LOWORD(NewRMCB->address) );
}
else
{
SET_AX( context, 0x8015 ); /* callback unavailable */
SET_CFLAG(context);
}
}
/**********************************************************************
2007-02-02 15:38:45 +01:00
* FreeRMCB
*/
2007-02-02 15:38:45 +01:00
static void DOSVM_FreeRMCB( CONTEXT86 *context )
{
FIXME("callback address: %04x:%04x\n",
CX_reg(context), DX_reg(context));
if (DPMI_FreeRMCB(MAKELONG(DX_reg(context), CX_reg(context)))) {
SET_AX( context, 0x8024 ); /* invalid callback address */
SET_CFLAG(context);
}
}
/**********************************************************************
* DOSVM_CheckWrappers
*
* Check if this was really a wrapper call instead of an interrupt.
*/
BOOL DOSVM_CheckWrappers( CONTEXT86 *context )
{
if (context->SegCs==DOSVM_dpmi_segments->dpmi_seg) {
/* This is the protected mode switch */
StartPM(context);
return TRUE;
}
else if (context->SegCs==DOSVM_dpmi_segments->xms_seg)
{
/* This is the XMS driver entry point */
XMS_Handler(context);
return TRUE;
}
else
{
/* Check for RMCB */
RMCB *CurrRMCB = FirstRMCB;
while (CurrRMCB && (HIWORD(CurrRMCB->address) != context->SegCs))
CurrRMCB = CurrRMCB->next;
if (CurrRMCB) {
/* RMCB call, propagate to protected-mode handler */
DPMI_CallRMCBProc(context, CurrRMCB, dpmi_flag);
return TRUE;
}
}
return FALSE;
}
/**********************************************************************
* DOSVM_Int31Handler (WINEDOS16.149)
*
* Handler for int 31h (DPMI).
*/
void WINAPI DOSVM_Int31Handler( CONTEXT86 *context )
{
RESET_CFLAG(context);
switch(AX_reg(context))
{
case 0x0000: /* Allocate LDT descriptors */
TRACE( "allocate LDT descriptors (%d)\n", CX_reg(context) );
{
WORD sel = AllocSelectorArray16( CX_reg(context) );
if(!sel)
{
TRACE( "failed\n" );
SET_AX( context, 0x8011 ); /* descriptor unavailable */
SET_CFLAG( context );
}
else
{
TRACE( "success, array starts at 0x%04x\n", sel );
SET_AX( context, sel );
}
}
break;
case 0x0001: /* Free LDT descriptor */
TRACE( "free LDT descriptor (0x%04x)\n", BX_reg(context) );
if (FreeSelector16( BX_reg(context) ))
{
SET_AX( context, 0x8022 ); /* invalid selector */
SET_CFLAG( context );
}
else
{
/* If a segment register contains the selector being freed, */
/* set it to zero. */
if (!((context->SegDs^BX_reg(context)) & ~3)) context->SegDs = 0;
if (!((context->SegEs^BX_reg(context)) & ~3)) context->SegEs = 0;
if (!((context->SegFs^BX_reg(context)) & ~3)) context->SegFs = 0;
if (!((context->SegGs^BX_reg(context)) & ~3)) context->SegGs = 0;
}
break;
case 0x0002: /* Real mode segment to descriptor */
TRACE( "real mode segment to descriptor (0x%04x)\n", BX_reg(context) );
{
WORD entryPoint = 0; /* KERNEL entry point for descriptor */
switch(BX_reg(context))
{
case 0x0000: entryPoint = 183; break; /* __0000H */
case 0x0040: entryPoint = 193; break; /* __0040H */
case 0xa000: entryPoint = 174; break; /* __A000H */
case 0xb000: entryPoint = 181; break; /* __B000H */
case 0xb800: entryPoint = 182; break; /* __B800H */
case 0xc000: entryPoint = 195; break; /* __C000H */
case 0xd000: entryPoint = 179; break; /* __D000H */
case 0xe000: entryPoint = 190; break; /* __E000H */
case 0xf000: entryPoint = 194; break; /* __F000H */
default:
FIXME("Real mode segment (%x) to descriptor: no longer supported\n",
BX_reg(context));
SET_CFLAG( context );
break;
}
if (entryPoint)
{
FARPROC16 proc = GetProcAddress16( GetModuleHandle16( "KERNEL" ),
(LPCSTR)(ULONG_PTR)entryPoint );
SET_AX( context, LOWORD(proc) );
}
}
break;
case 0x0003: /* Get next selector increment */
TRACE("get selector increment (__AHINCR)\n");
context->Eax = __AHINCR;
break;
case 0x0004: /* Lock selector (not supported) */
FIXME("lock selector not supported\n");
context->Eax = 0; /* FIXME: is this a correct return value? */
break;
case 0x0005: /* Unlock selector (not supported) */
FIXME("unlock selector not supported\n");
context->Eax = 0; /* FIXME: is this a correct return value? */
break;
case 0x0006: /* Get selector base address */
TRACE( "get selector base address (0x%04x)\n", BX_reg(context) );
{
LDT_ENTRY entry;
WORD sel = BX_reg(context);
wine_ldt_get_entry( sel, &entry );
if (wine_ldt_is_empty(&entry))
{
context->Eax = 0x8022; /* invalid selector */
SET_CFLAG(context);
}
else
{
void *base = wine_ldt_get_base(&entry);
SET_CX( context, HIWORD(base) );
SET_DX( context, LOWORD(base) );
}
}
break;
case 0x0007: /* Set selector base address */
{
DWORD base = MAKELONG( DX_reg(context), CX_reg(context) );
WORD sel = BX_reg(context);
TRACE( "set selector base address (0x%04x,0x%08x)\n", sel, base );
/* check if Win16 app wants to access lower 64K of DOS memory */
if (base < 0x10000 && DOSVM_IsWin16())
2005-05-10 17:22:09 +02:00
DOSMEM_MapDosLayout();
SetSelectorBase( sel, base );
}
break;
case 0x0008: /* Set selector limit */
{
DWORD limit = MAKELONG( DX_reg(context), CX_reg(context) );
TRACE( "set selector limit (0x%04x,0x%08x)\n",
BX_reg(context), limit );
SetSelectorLimit16( BX_reg(context), limit );
}
break;
case 0x0009: /* Set selector access rights */
TRACE( "set selector access rights(0x%04x,0x%04x)\n",
BX_reg(context), CX_reg(context) );
SelectorAccessRights16( BX_reg(context), 1, CX_reg(context) );
break;
case 0x000a: /* Allocate selector alias */
TRACE( "allocate selector alias (0x%04x)\n", BX_reg(context) );
SET_AX( context, AllocCStoDSAlias16( BX_reg(context) ) );
if (!AX_reg(context))
{
SET_AX( context, 0x8011 ); /* descriptor unavailable */
SET_CFLAG(context);
}
break;
case 0x000b: /* Get descriptor */
TRACE( "get descriptor (0x%04x)\n", BX_reg(context) );
{
LDT_ENTRY *entry = (LDT_ENTRY*)CTX_SEG_OFF_TO_LIN( context,
context->SegEs,
context->Edi );
wine_ldt_get_entry( BX_reg(context), entry );
}
break;
case 0x000c: /* Set descriptor */
TRACE( "set descriptor (0x%04x)\n", BX_reg(context) );
{
LDT_ENTRY *entry = (LDT_ENTRY*)CTX_SEG_OFF_TO_LIN( context,
context->SegEs,
context->Edi );
wine_ldt_set_entry( BX_reg(context), entry );
}
break;
case 0x000d: /* Allocate specific LDT descriptor */
FIXME( "allocate descriptor (0x%04x), stub!\n", BX_reg(context) );
SET_AX( context, 0x8011 ); /* descriptor unavailable */
SET_CFLAG( context );
break;
case 0x000e: /* Get Multiple Descriptors (1.0) */
FIXME( "get multiple descriptors - unimplemented\n" );
break;
case 0x000f: /* Set Multiple Descriptors (1.0) */
FIXME( "set multiple descriptors - unimplemented\n" );
break;
case 0x0100: /* Allocate DOS memory block */
TRACE( "allocate DOS memory block (0x%x paragraphs)\n", BX_reg(context) );
{
DWORD dw = GlobalDOSAlloc16( (DWORD)BX_reg(context) << 4 );
if (dw) {
SET_AX( context, HIWORD(dw) );
SET_DX( context, LOWORD(dw) );
} else {
SET_AX( context, 0x0008 ); /* insufficient memory */
SET_BX( context, DOSMEM_Available() >> 4 );
SET_CFLAG(context);
}
break;
}
case 0x0101: /* Free DOS memory block */
TRACE( "free DOS memory block (0x%04x)\n", DX_reg(context) );
{
WORD error = GlobalDOSFree16( DX_reg(context) );
if (error) {
SET_AX( context, 0x0009 ); /* memory block address invalid */
SET_CFLAG( context );
}
}
break;
case 0x0102: /* Resize DOS Memory Block */
FIXME( "resize DOS memory block (0x%04x, 0x%x paragraphs) - unimplemented\n",
DX_reg(context), BX_reg(context) );
break;
case 0x0200: /* get real mode interrupt vector */
TRACE( "get realmode interupt vector (0x%02x)\n",
BL_reg(context) );
{
FARPROC16 proc = DOSVM_GetRMHandler( BL_reg(context) );
SET_CX( context, SELECTOROF(proc) );
SET_DX( context, OFFSETOF(proc) );
}
break;
case 0x0201: /* set real mode interrupt vector */
TRACE( "set realmode interrupt vector (0x%02x, 0x%04x:0x%04x)\n",
BL_reg(context), CX_reg(context), DX_reg(context) );
DOSVM_SetRMHandler( BL_reg(context),
(FARPROC16)MAKESEGPTR(CX_reg(context), DX_reg(context)) );
break;
case 0x0202: /* Get Processor Exception Handler Vector */
FIXME( "Get Processor Exception Handler Vector (0x%02x)\n",
BL_reg(context) );
if (DOSVM_IsDos32())
{
SET_CX( context, 0 );
context->Edx = 0;
}
else
{
SET_CX( context, 0 );
SET_DX( context, 0 );
}
break;
case 0x0203: /* Set Processor Exception Handler Vector */
FIXME( "Set Processor Exception Handler Vector (0x%02x)\n",
BL_reg(context) );
break;
case 0x0204: /* Get protected mode interrupt vector */
TRACE("get protected mode interrupt handler (0x%02x)\n",
BL_reg(context));
if (DOSVM_IsDos32())
{
FARPROC48 handler = DOSVM_GetPMHandler48( BL_reg(context) );
SET_CX( context, handler.selector );
context->Edx = handler.offset;
}
else
{
FARPROC16 handler = DOSVM_GetPMHandler16( BL_reg(context) );
SET_CX( context, SELECTOROF(handler) );
SET_DX( context, OFFSETOF(handler) );
}
break;
case 0x0205: /* Set protected mode interrupt vector */
TRACE("set protected mode interrupt handler (0x%02x,0x%04x:0x%08x)\n",
BL_reg(context), CX_reg(context), context->Edx);
if (DOSVM_IsDos32())
{
FARPROC48 handler;
handler.selector = CX_reg(context);
handler.offset = context->Edx;
DOSVM_SetPMHandler48( BL_reg(context), handler );
}
else
{
FARPROC16 handler;
handler = (FARPROC16)MAKESEGPTR( CX_reg(context), DX_reg(context));
DOSVM_SetPMHandler16( BL_reg(context), handler );
}
break;
case 0x0300: /* Simulate real mode interrupt */
TRACE( "Simulate real mode interrupt %02x.\n", BL_reg(context));
DOSVM_CallRMInt( context );
break;
case 0x0301: /* Call real mode procedure with far return */
TRACE( "Call real mode procedure with far return.\n" );
DOSVM_CallRMProc( context, FALSE );
break;
case 0x0302: /* Call real mode procedure with interrupt return */
TRACE( "Call real mode procedure with interrupt return.\n" );
DOSVM_CallRMProc( context, TRUE );
break;
case 0x0303: /* Allocate Real Mode Callback Address */
TRACE( "Allocate real mode callback address.\n" );
DOSVM_AllocRMCB( context );
break;
case 0x0304: /* Free Real Mode Callback Address */
TRACE( "Free real mode callback address.\n" );
DOSVM_FreeRMCB( context );
break;
case 0x0305: /* Get State Save/Restore Addresses */
TRACE("get state save/restore addresses\n");
/* we probably won't need this kind of state saving */
SET_AX( context, 0 );
/* real mode: just point to the lret */
SET_BX( context, DOSVM_dpmi_segments->wrap_seg );
SET_CX( context, 2 );
/* protected mode: don't have any handler yet... */
/* FIXME: Use DI in 16-bit DPMI and EDI in 32-bit DPMI */
FIXME("no protected-mode dummy state save/restore handler yet\n");
SET_SI( context, 0 );
context->Edi = 0;
break;
case 0x0306: /* Get Raw Mode Switch Addresses */
TRACE("get raw mode switch addresses\n");
/* real mode, point to standard DPMI return wrapper */
SET_BX( context, DOSVM_dpmi_segments->wrap_seg );
SET_CX( context, 0 );
/* protected mode, point to DPMI call wrapper */
/* FIXME: Use DI in 16-bit DPMI and EDI in 32-bit DPMI */
/* FIXME: Doesn't work in DPMI32... */
SET_SI( context, DOSVM_dpmi_segments->dpmi_sel );
context->Edi = 8; /* offset of the INT 0x31 call */
break;
case 0x0400: /* Get DPMI version */
TRACE("get DPMI version\n");
{
SYSTEM_INFO si;
GetSystemInfo(&si);
SET_AX( context, 0x005a ); /* DPMI version 0.90 */
SET_BX( context, 0x0005 ); /* Flags: 32-bit, virtual memory */
SET_CL( context, si.wProcessorLevel );
SET_DX( context, 0x0870 ); /* Master/slave interrupt controller base */
}
break;
case 0x0401: /* Get DPMI Capabilities (1.0) */
FIXME( "get dpmi capabilities - unimplemented\n");
break;
case 0x0500: /* Get free memory information */
TRACE("get free memory information\n");
{
2003-11-17 21:49:45 +01:00
MEMORYSTATUS status;
/* the layout is just the same as MEMMANINFO, but without
* the dwSize entry.
*/
2003-11-17 21:49:45 +01:00
struct
{
DWORD dwLargestFreeBlock;
DWORD dwMaxPagesAvailable;
DWORD dwMaxPagesLockable;
DWORD dwTotalLinearSpace;
DWORD dwTotalUnlockedPages;
DWORD dwFreePages;
DWORD dwTotalPages;
DWORD dwFreeLinearSpace;
DWORD dwSwapFilePages;
WORD wPageSize;
} *info = CTX_SEG_OFF_TO_LIN( context, context->SegEs, context->Edi );
GlobalMemoryStatus( &status );
info->wPageSize = getpagesize();
info->dwLargestFreeBlock = status.dwAvailVirtual;
info->dwMaxPagesAvailable = info->dwLargestFreeBlock / info->wPageSize;
info->dwMaxPagesLockable = info->dwMaxPagesAvailable;
info->dwTotalLinearSpace = status.dwTotalVirtual / info->wPageSize;
info->dwTotalUnlockedPages = info->dwTotalLinearSpace;
info->dwFreePages = info->dwMaxPagesAvailable;
info->dwTotalPages = info->dwTotalLinearSpace;
info->dwFreeLinearSpace = info->dwMaxPagesAvailable;
info->dwSwapFilePages = status.dwTotalPageFile / info->wPageSize;
break;
}
case 0x0501: /* Allocate memory block */
{
DWORD size = MAKELONG( CX_reg(context), BX_reg(context) );
BYTE *ptr;
TRACE( "allocate memory block (%d bytes)\n", size );
ptr = DPMI_xalloc( size );
if (!ptr)
{
SET_AX( context, 0x8012 ); /* linear memory not available */
SET_CFLAG(context);
}
else
{
SET_BX( context, HIWORD(ptr) );
SET_CX( context, LOWORD(ptr) );
SET_SI( context, HIWORD(ptr) );
SET_DI( context, LOWORD(ptr) );
}
break;
}
case 0x0502: /* Free memory block */
{
DWORD handle = MAKELONG( DI_reg(context), SI_reg(context) );
TRACE( "free memory block (0x%08x)\n", handle );
DPMI_xfree( (void *)handle );
}
break;
case 0x0503: /* Resize memory block */
{
DWORD size = MAKELONG( CX_reg(context), BX_reg(context) );
DWORD handle = MAKELONG( DI_reg(context), SI_reg(context) );
BYTE *ptr;
TRACE( "resize memory block (0x%08x, %d bytes)\n", handle, size );
ptr = DPMI_xrealloc( (void *)handle, size );
if (!ptr)
{
SET_AX( context, 0x8012 ); /* linear memory not available */
SET_CFLAG(context);
} else {
SET_BX( context, HIWORD(ptr) );
SET_CX( context, LOWORD(ptr) );
SET_SI( context, HIWORD(ptr) );
SET_DI( context, LOWORD(ptr) );
}
}
break;
case 0x0507: /* Set page attributes (1.0) */
FIXME( "set page attributes - unimplemented\n" );
break; /* Just ignore it */
case 0x0600: /* Lock linear region */
TRACE( "lock linear region - ignored (no paging)\n" );
break;
case 0x0601: /* Unlock linear region */
TRACE( "unlock linear region - ignored (no paging)\n" );
break;
case 0x0602: /* Mark real mode region as pageable */
TRACE( "mark real mode region as pageable - ignored (no paging)\n" );
break;
case 0x0603: /* Relock real mode region */
TRACE( "relock real mode region - ignored (no paging)\n" );
break;
case 0x0604: /* Get page size */
TRACE("get pagesize\n");
SET_BX( context, HIWORD(getpagesize()) );
SET_CX( context, LOWORD(getpagesize()) );
break;
case 0x0700: /* Mark pages as paging candidates */
TRACE( "mark pages as paging candidates - ignored (no paging)\n" );
break;
case 0x0701: /* Discard pages */
TRACE( "discard pages - ignored (no paging)\n" );
break;
case 0x0702: /* Mark page as demand-paging candidate */
TRACE( "mark page as demand-paging candidate - ignored (no paging)\n" );
break;
case 0x0703: /* Discard page contents */
TRACE( "discard page contents - ignored (no paging)\n" );
break;
case 0x0800: /* Physical address mapping */
FIXME( "physical address mapping (0x%08x) - unimplemented\n",
MAKELONG(CX_reg(context),BX_reg(context)) );
break;
case 0x0900: /* Get and Disable Virtual Interrupt State */
TRACE( "Get and Disable Virtual Interrupt State: %d\n",
2008-03-01 11:57:00 +01:00
get_vm86_teb_info()->dpmi_vif );
SET_AL( context, get_vm86_teb_info()->dpmi_vif ? 1 : 0 );
get_vm86_teb_info()->dpmi_vif = 0;
break;
case 0x0901: /* Get and Enable Virtual Interrupt State */
TRACE( "Get and Enable Virtual Interrupt State: %d\n",
2008-03-01 11:57:00 +01:00
get_vm86_teb_info()->dpmi_vif );
SET_AL( context, get_vm86_teb_info()->dpmi_vif ? 1 : 0 );
get_vm86_teb_info()->dpmi_vif = 1;
break;
case 0x0902: /* Get Virtual Interrupt State */
TRACE( "Get Virtual Interrupt State: %d\n",
2008-03-01 11:57:00 +01:00
get_vm86_teb_info()->dpmi_vif );
SET_AL( context, get_vm86_teb_info()->dpmi_vif ? 1 : 0 );
break;
case 0x0e00: /* Get Coprocessor Status (1.0) */
/*
* Return status in AX bits:
* B0 - MPv (MP bit in the virtual MSW/CR0)
* 0 = numeric coprocessor is disabled for this client
* 1 = numeric coprocessor is enabled for this client
* B1 - EMv (EM bit in the virtual MSW/CR0)
* 0 = client is not emulating coprocessor instructions
* 1 = client is emulating coprocessor instructions
* B2 - MPr (MP bit from the actual MSW/CR0)
* 0 = numeric coprocessor is not present
* 1 = numeric coprocessor is present
* B3 - EMr (EM bit from the actual MSW/CR0)
* 0 = host is not emulating coprocessor instructions
* 1 = host is emulating coprocessor instructions
* B4-B7 - coprocessor type
* 00H = no coprocessor
* 02H = 80287
* 03H = 80387
* 04H = 80486 with numeric coprocessor
* 05H-0FH = reserved for future numeric processors
*/
TRACE( "Get Coprocessor Status\n" );
SET_AX( context, 69 ); /* 486, coprocessor present and enabled */
break;
case 0x0e01: /* Set Coprocessor Emulation (1.0) */
/*
* See function 0x0e00.
* BX bit B0 is new value for MPv.
* BX bit B1 is new value for EMv.
*/
if (BX_reg(context) != 1)
FIXME( "Set Coprocessor Emulation to %d - unimplemented\n",
BX_reg(context) );
else
TRACE( "Set Coprocessor Emulation - ignored\n" );
break;
default:
INT_BARF( context, 0x31 );
SET_AX( context, 0x8001 ); /* unsupported function */
SET_CFLAG(context);
break;
}
}