Sweden-Number/documentation/debugger.sgml

  <chapter id="debugger">
    <title>Debugging Wine</title>

    <sect1 id="dbg-intro">
      <title>Introduction</title>

      <para>
        Written by &name-eric-pouech; <email>&email-eric-pouech;</email>
	(Last updated: 9/15/2002)
      </para>
      <para>
        (Extracted from <filename>wine/documentation/winedbg</filename>)
      </para>

      <sect2>
        <title>Processes and threads: in underlying OS and in Windows</title>

        <para>
          Before going into the depths of debugging in Wine, here's
          a small overview of process and thread handling in Wine.
          It has to be clear that there are two different beasts:
          processes/threads from the Unix point of view and
          processes/threads from a Windows point of view.
        </para>
        <para>
          Each Windows' thread is implemented as a Unix process (under
          Linux using the <function>clone</function> syscall), meaning
          that all threads of a same Windows' process share the same
          (unix) address space.
        </para>
        <para>
          In the following:
        </para>
        <itemizedlist>
          <listitem>
            <para>
              <varname>W-process</varname> means a process in Windows' terminology
            </para>
          </listitem>
          <listitem>
            <para>
              <varname>U-process</varname> means a process in Unix' terminology
            </para>
          </listitem>
          <listitem>
            <para>
              <varname>W-thread</varname> means a thread in Windows' terminology
            </para>
          </listitem>
        </itemizedlist>
        <para>
          A <varname>W-process</varname> is made of one or several
          <varname>W-threads</varname>. Each
          <varname>W-thread</varname> is mapped to one and only one
          <varname>U-process</varname>. All
          <varname>U-processes</varname> of a same
          <varname>W-process</varname> share the same address space.
        </para>
        <para>
          Each Unix process can be identified by two values:
        </para>
        <itemizedlist>
          <listitem>
            <para>
              the Unix process id (<varname>upid</varname> in the following)
            </para>
          </listitem>
          <listitem>
            <para>
              the Windows's thread id (<varname>tid</varname>)
            </para>
          </listitem>
        </itemizedlist>
        <para>
          Each Windows' process has also a Windows' process id
          (<varname>wpid</varname> in the following). It must be clear
          that <varname>upid</varname> and <varname>wpid</varname> are
          different and shall not be used instead of the other.
        </para>
        <para>
          <varname>Wpid</varname> and <varname>tid</varname> are
          defined (Windows) system wide. They must not be confused
          with process or thread handles which, as any handle, is an
          indirection to a system object (in this case process or
          thread). A same process can have several different handles
          on the same kernel object. The handles can be defined as
          local (the values is only valid in a process), or system
          wide (the same handle can be used by any
          <varname>W-process</varname>).
        </para>
      </sect2>

      <sect2>
        <title>Wine, debugging and WineDbg</title>

        <para>
          When talking of debugging in Wine, there are at least two
          levels to think of:
        </para>
        <itemizedlist>
          <listitem>
            <para>
              the Windows' debugging API.
            </para>
          </listitem>
          <listitem>
            <para>
              the Wine integrated debugger, dubbed <command>WineDbg</command>.
            </para>
          </listitem>
        </itemizedlist>
        <para>
          Wine implements most of the Windows' debugging API (the
          part in <filename>KERNEL32.DLL</filename>, not the one in
          <filename>IMAGEHLP.DLL</filename>), and allows any program
          (emulated or Winelib) using that API to debug a
          <varname>W-process</varname>.
        </para>
        <para>
          <command>WineDbg</command> is a Winelib application making
          use of this API to allow debugging both any Wine or Winelib
          applications as well as Wine itself (kernel and all DLLs).
        </para>
      </sect2>
    </sect1>


    <sect1 id="dbg-modes">
      <title>WineDbg's modes of invocation</title>

      <sect2>
        <title>Starting a process</title>

        <para>
          Any application (either a Windows' native executable, or a
          Winelib application) can be run through
          <command>WineDbg</command>. Command line options and tricks
          are the same as for wine:
        </para>
        <screen>
winedbg telnet.exe
winedbg "hl.exe -windowed"
        </screen>
      </sect2>

      <sect2>
        <title>Attaching</title>

        <para>
          <command>WineDbg</command> can also be launched without any
          command line argument: <command>WineDbg</command> is started
          without any attached process. You can get a list of running
          <varname>W-processes</varname> (and their
          <varname>wpid</varname>'s) using the <command>walk
            process</command> command, and then, with the
          <command>attach</command> command, pick up the
          <varname>wpid</varname> of the <varname>W-process</varname>
          you want to debug. This is (for now) a neat feature for the
          following reasons:
        </para>
        <itemizedlist>
          <listitem>
            <para>
              you can debug an already started application
            </para>
          </listitem>
        </itemizedlist>
      </sect2>

      <sect2 id="dbg-on-exception">
        <title id="dbg-exception-title">On exceptions</title>

        <para>
          When something goes wrong, Windows tracks this as an
          exception. Exceptions exist for segmentation violation,
          stack overflow, division by zero...
        </para>
        <para>
          When an exception occurs, Wine checks if the <varname>W-process</varname> is
          debugged. If so, the exception event is sent to the
          debugger, which takes care of it: end of the story. This
          mechanism is part of the standard Windows' debugging API.
        </para>
        <para>
          If the <varname>W-process</varname> is not debugged, Wine
          tries to launch a debugger. This debugger (normally
          <command>WineDbg</command>, see III Configuration for more
          details), at startup, attaches to the
          <varname>W-process</varname> which generated the exception
          event. In this case, you are able to look at the causes of
          the exception, and either fix the causes (and continue
          further the execution) or dig deeper to understand what went
          wrong.
        </para>
        <para>
          If <command>WineDbg</command> is the standard debugger, the
          <command>pass</command> and <command>cont</command> commands
          are the two ways to let the process go further for the
          handling of the  exception event.
        </para>
        <para>
          To be more precise on the way Wine (and Windows) generates
          exception events, when a fault occurs (segmentation
          violation, stack overflow...), the event is first sent to
          the debugger (this is known as a first chance exception).
          The debugger can give two answers:
        </para>

        <variablelist>
          <varlistentry>
            <term>continue:</term>
            <listitem>
              <para>
                the debugger had the ability to correct what's
                generated the exception, and is now able to continue
                process execution.
              </para>
            </listitem>
          </varlistentry>
          <varlistentry>
            <term>pass:</term>
            <listitem>
              <para>
                the debugger couldn't correct the cause of the
                first chance exception. Wine will now try to walk
                the list of exception handlers to see if one of them
                can handle the exception. If no exception handler is
                found, the exception is sent once again to the
                debugger to indicate the failure of the exception
                handling.
              </para>
            </listitem>
          </varlistentry>
        </variablelist>
        <note>
          <para>
            since some of Wine's code uses exceptions and
            <function>try/catch</function> blocks to provide some
            functionality, <command>WineDbg</command> can be entered
            in such cases with segv exceptions. This happens, for
            example, with <function>IsBadReadPtr</function> function.
            In that case, the <command>pass</command> command shall be
            used, to let the handling of the exception to be done by
            the <function>catch</function> block in
            <function>IsBadReadPtr</function>.
          </para>
        </note>
      </sect2>

      <sect2 id="interrupt">
        <title>Interrupting</title>

	<para>
	  You can stop the debugger while it's running by hitting
	  Ctrl-C in its window. This will stop the debugged process,
	  and let you manipulate the current context
	</para>
      </sect2>

      <sect2>
        <title>Quitting</title>

        <para>
	  Wine supports the new XP APIs, allowing for a debugger to
	  detach from a program being debugged (see
	  <command>detach</command> command). Unfortunately, as the
	  debugger cannot, for now, neither clear its internal
	  information, nor restart a new process, the debugger, after
	  detaching itself, cannot do much except being quitted.  
        </para>
      </sect2>
    </sect1>


    <sect1 id="wine-debugger">
      <title>Using the Wine Debugger</title>

      <para>
        Written by &name-marcus-meissner; <email>&email-marcus-meissner;</email>,
        additions welcome.
      </para>
      <para>
        (Extracted from <filename>wine/documentation/debugging</filename>)
      </para>

      <para>
        This file describes where to start debugging Wine. If at any
        point you get stuck and want to ask for help, please read the
        <emphasis>How to Report A Bug</emphasis> section of the 
        <emphasis>Wine Users Guide</emphasis> for information on how to write
        useful bug reports.
      </para>

      <sect2>
        <title>Crashes</title>

        <para>
          These usually show up like this:
        </para>
        <screen>
|Unexpected Windows program segfault - opcode = 8b
|Segmentation fault in Windows program 1b7:c41.
|Loading symbols from ELF file /root/wine/wine...
|....more Loading symbols from ...
|In 16 bit mode.
|Register dump:
| CS:01b7 SS:016f DS:0287 ES:0000
| IP:0c41 SP:878a BP:8796 FLAGS:0246
| AX:811e BX:0000 CX:0000 DX:0000 SI:0001 DI:ffff
|Stack dump:
|0x016f:0x878a:  0001 016f ffed 0000 0000 0287 890b 1e5b
|0x016f:0x879a:  01b7 0001 000d 1050 08b7 016f 0001 000d
|0x016f:0x87aa:  000a 0003 0004 0000 0007 0007 0190 0000
|0x016f:0x87ba:
|
|0050: sel=0287 base=40211d30 limit=0b93f (bytes) 16-bit rw-
|Backtrace:
|0 0x01b7:0x0c41 (PXSRV_FONGETFACENAME+0x7c)
|1 0x01b7:0x1e5b (PXSRV_FONPUTCATFONT+0x2cd)
|2 0x01a7:0x05aa
|3 0x01b7:0x0768 (PXSRV_FONINITFONTS+0x81)
|4 0x014f:0x03ed (PDOXWIN_@SQLCURCB$Q6CBTYPEULN8CBSCTYPE+0x1b1)
|5 0x013f:0x00ac
|
|0x01b7:0x0c41 (PXSRV_FONGETFACENAME+0x7c):  movw        %es:0x38(%bx),%dx
        </screen>
        <para>
          Steps to debug a crash. You may stop at any step, but please
          report the bug and provide as much of the information
          gathered to the bug report as feasible.
        </para>

        <orderedlist>
          <listitem>
            <para>
              Get the reason for the crash. This is usually an access to
              an invalid selector, an access to an out of range address
              in a valid selector, popping a segment register from the
              stack or the like. When reporting a crash, report this
              <emphasis>whole</emphasis> crashdump even if it doesn't
              make sense to you.
            </para>
            <para>
              (In this case it is access to an invalid selector, for
              <systemitem>%es</systemitem> is <literal>0000</literal>, as
              seen in the register dump).
            </para>
          </listitem>
          <listitem>
            <para>
              Determine the cause of the crash. Since this is usually
              a primary/secondary reaction to a failed or misbehaving
              Wine function, rerun Wine with <parameter>-debugmsg
                +relay</parameter> added to the commandline. This will
              generate quite a lot of output, but usually the reason is
              located in the last call(s).  Those lines usually look like
              this:
            </para>
            <screen>
|Call KERNEL.90: LSTRLEN(0227:0692 "text") ret=01e7:2ce7 ds=0227
      ^^^^^^^^^  ^       ^^^^^^^^^ ^^^^^^      ^^^^^^^^^    ^^^^
      |          |       |         |           |            |Datasegment
      |          |       |         |           |Return address
      |          |       |         |textual parameter
      |          |       |
      |          |       |Argument(s). This one is a win16 segmented pointer.
      |          |Function called.
      |The module, the function is called in. In this case it is KERNEL.

|Ret  KERNEL.90: LSTRLEN() retval=0x0004 ret=01e7:2ce7 ds=0227
                                  ^^^^^^
				  |Returnvalue is 16 bit and has the value 4.
            </screen>
          </listitem>
          <listitem>
            <para>
              If you have found a misbehaving function, try to find out
              why it misbehaves. Find the function in the source code.
              Try to make sense of the arguments passed. Usually there is
              a <function>WINE_DEFAULT_DEBUG_CHANNEL(&lt;channel>);</function>
              at the beginning of the file. Rerun wine with
              <parameter>-debugmsg +xyz,+relay</parameter> added to the
              commandline.
            </para>
            <para>
              Occasionally there are additional debug channels defined at the 
              beginning of the file in the form.
              <function>WINE_DECLARE_DEBUG_CHANNEL(&lt;channel>);</function>
              If so the offending function may also uses one of these alternate
              channels. Look through the the function for  
             <function>TRACE_(&lt;channel>)(" ... /n");</function> and add any
             additional channels to the commandline.
            </para>
          </listitem>
          <listitem>
            <para>
              Additional information on how to debug using the internal
              debugger can be  found in
              <filename>programs/winedbg/README</filename>.
            </para>
          </listitem>
          <listitem>
            <para>
              If this information isn't clear enough or if you want to
              know more about what's happening in the function itself,
              try running wine with <parameter>-debugmsg
                +all</parameter>, which dumps ALL included debug
              information in wine.
            </para>
          </listitem>
          <listitem>
            <para>
              If even that isn't enough, add more debug output for yourself 
              into the functions you find relevant. See The section on Debug 
              Logging in this guide for more information. You might
              also try to run the program in <command>gdb</command>
              instead of using the Wine debugger. If you do that, use
              <parameter>handle SIGSEGV nostop noprint</parameter> to
              disable the handling of seg faults inside
              <command>gdb</command> (needed for Win16). 
            </para>
          </listitem>
          <listitem>
            <para>
              You can also set a breakpoint for that function. Start wine 
              useing <command>winedbg</command> instead of 
              <command>wine</command>. Once the debugger is is running enter 
              <command>break</command> <parameter>KERNEL_LSTRLEN</parameter>
              (replace by function you want to debug, CASE IS RELEVANT) 
              to set a breakpoint.  Then
              use <command>continue</command> to start normal
              program-execution. Wine will stop if it reaches the
              breakpoint. If the program isn't yet at the crashing call
              of that function, use <command>continue</command> again
              until you are about to enter that function. You may now
              proceed with single-stepping the function until you reach
              the point of crash. Use the other debugger commands to
              print registers and the like.
            </para>
          </listitem>
        </orderedlist>
      </sect2>

      <sect2>
        <title>Program hangs, nothing happens</title>

        <para>
          Start the program with <command>winedbg</command> instead of
          <command>wine</command>. When the program locks up switch to the 
          winedbg terminal and press 
          <keycombo><keycap>Ctrl</keycap><keycap>C</keycap></keycombo>. this
          will stop the program and let you debug the program as you would for
          a crash. 
        </para>
      </sect2>

      <sect2>
        <title>Program reports an error with a Messagebox</title>

        <para>
          Sometimes programs are reporting failure using more or
          less nondescript messageboxes. We can debug this using the
          same method as Crashes, but there is one problem... For
          setting up a message box the program also calls Wine
          producing huge chunks of debug code.
        </para>
        <para>
          Since the failure happens usually directly before setting up
          the Messagebox you can start winedbg and set a
          breakpoint at <function>MessageBoxA</function> (called by win16
          and win32 programs) and proceed with
          <command>continue</command>. With <parameter>--debugmsg
            +all</parameter> Wine will now stop directly before setting
          up the Messagebox. Proceed as explained above.
        </para>
        <para>
          You can also run wine using <command>wine -debugmsg +relay
            program.exe 2>&1 | less -i</command> and in
          <command>less</command> search for <quote>MessageBox</quote>.
        </para>
      </sect2>

      <sect2>
        <title>Disassembling programs:</title>

        <para>
          You may also try to disassemble the offending program to
          check for undocumented features and/or use of them.
        </para>
        <para>
          The best, freely available, disassembler for Win16 programs is
          <application>Windows Codeback</application>, archive name
          <filename>wcbxxx.zip</> (e.g. <filename>wcb105a.zip</>), which
          usually can be found in the <filename>Cica-Mirror</filename>
          subdirectory on the Wine ftp sites. (See <filename>ANNOUNCE</>).
        </para>
        <para>
          Disassembling win32 programs is possible using
          <application>Windows Disassembler 32</>. Look for
          a file called <filename>w32dsm87.zip</> (or similar)
          on <ulink url="http://www.winsite.com/">http://www.winsite.com</>
          and mirrors.  The shareware version does not allow saving of
          disassembly listings. You can also use the newer (and in the
          full version better) <application>Interactive
            Disassembler</application> (IDA) from the ftp sites mentioned
          at the end of the document. Understanding disassembled code is
          mostly a question of exercise.
        </para>
        <para>
          Most code out there uses standard C function entries (for it
          is usually  written in C). Win16 function entries usually
          look like that:
        </para>
        <programlisting>
push bp
mov bp, sp
... function code ..
retf XXXX 	&lt;--------- XXXX is number of bytes of arguments
        </programlisting>
        <para>
          This is a <function>FAR</function> function with no local
          storage. The arguments usually start at
          <literal>[bp+6]</literal> with increasing offsets. Note, that
          <literal>[bp+6]</literal> belongs to the
          <emphasis>rightmost</emphasis> argument, for exported win16
          functions use the PASCAL calling convention. So, if we use
          <function>strcmp(a,b)</function> with <parameter>a</parameter>
          and <parameter>b</parameter> both 32 bit variables
          <parameter>b</parameter> would be at <literal>[bp+6]</literal>
          and <parameter>a</parameter> at <literal>[bp+10]</literal>.
        </para>
        <para>
          Most functions make also use of local storage in the stackframe:
        </para>
        <programlisting>
enter 0086, 00
... function code ...
leave
retf XXXX
        </programlisting>
        <para>
          This does mostly the same as above, but also adds
          <literal>0x86</literal> bytes of stackstorage, which is
          accessed using <literal>[bp-xx]</literal>. Before calling a
          function, arguments are pushed on the stack using something
          like this:
        </para>
        <programlisting>
push word ptr [bp-02]	&lt;- will be at [bp+8]
push di			&lt;- will be at [bp+6]
call KERNEL.LSTRLEN
        </programlisting>
        <para>
          Here first the selector and then the offset to the passed
          string are pushed.
        </para>
      </sect2>

      <sect2>
        <title>Sample debugging session:</title>

        <para>
          Let's debug the infamous Word <filename>SHARE.EXE</filename>
          messagebox:
        </para>
        <screen>
|marcus@jet $ wine winword.exe
|            +---------------------------------------------+
|            | !  You must leave Windows and load SHARE.EXE|
|            |    before starting Word.                    |
|            +---------------------------------------------+
        </screen>
        <screen>
|marcus@jet $ wine winword.exe -debugmsg +relay -debug
|CallTo32(wndproc=0x40065bc0,hwnd=000001ac,msg=00000081,wp=00000000,lp=00000000)
|Win16 task 'winword': Breakpoint 1 at 0x01d7:0x001a
|CallTo16(func=0127:0070,ds=0927)
|Call WPROCS.24: TASK_RESCHEDULE() ret=00b7:1456 ds=0927
|Ret  WPROCS.24: TASK_RESCHEDULE() retval=0x8672 ret=00b7:1456 ds=0927
|CallTo16(func=01d7:001a,ds=0927)
|     AX=0000 BX=3cb4 CX=1f40 DX=0000 SI=0000 DI=0927 BP=0000 ES=11f7
|Loading symbols: /home/marcus/wine/wine...
|Stopped on breakpoint 1 at 0x01d7:0x001a
|In 16 bit mode.
|Wine-dbg>break MessageBoxA                          &lt;---- Set Breakpoint
|Breakpoint 2 at 0x40189100 (MessageBoxA [msgbox.c:190])
|Wine-dbg>c                                            &lt;---- Continue
|Call KERNEL.91: INITTASK() ret=0157:0022 ds=08a7
|     AX=0000 BX=3cb4 CX=1f40 DX=0000 SI=0000 DI=08a7 ES=11d7 EFL=00000286
|CallTo16(func=090f:085c,ds=0dcf,0x0000,0x0000,0x0000,0x0000,0x0800,0x0000,0x0000,0x0dcf)
|...                                                   &lt;----- Much debugoutput
|Call KERNEL.136: GETDRIVETYPE(0x0000) ret=060f:097b ds=0927
                               ^^^^^^ Drive 0 (A:)
|Ret  KERNEL.136: GETDRIVETYPE() retval=0x0002 ret=060f:097b ds=0927
                                        ^^^^^^  DRIVE_REMOVEABLE
						(It is a floppy diskdrive.)

|Call KERNEL.136: GETDRIVETYPE(0x0001) ret=060f:097b ds=0927
                               ^^^^^^ Drive 1 (B:)
|Ret  KERNEL.136: GETDRIVETYPE() retval=0x0000 ret=060f:097b ds=0927
                                        ^^^^^^  DRIVE_CANNOTDETERMINE
						(I don't have drive B: assigned)

|Call KERNEL.136: GETDRIVETYPE(0x0002) ret=060f:097b ds=0927
                               ^^^^^^^ Drive 2 (C:)
|Ret  KERNEL.136: GETDRIVETYPE() retval=0x0003 ret=060f:097b ds=0927
                                        ^^^^^^ DRIVE_FIXED
                                               (specified as a harddisk)

|Call KERNEL.97: GETTEMPFILENAME(0x00c3,0x09278364"doc",0x0000,0927:8248) ret=060f:09b1 ds=0927
                                 ^^^^^^           ^^^^^        ^^^^^^^^^
                                 |                |            |buffer for fname
                                 |                |temporary name ~docXXXX.tmp
                                 |Force use of Drive C:.

|Warning: GetTempFileName returns 'C:~doc9281.tmp', which doesn't seem to be writeable.
|Please check your configuration file if this generates a failure.
        </screen>
        <para>
          Whoops, it even detects that something is wrong!
        </para>
        <screen>
|Ret  KERNEL.97: GETTEMPFILENAME() retval=0x9281 ret=060f:09b1 ds=0927
                                          ^^^^^^ Temporary storage ID

|Call KERNEL.74: OPENFILE(0x09278248"C:~doc9281.tmp",0927:82da,0x1012) ret=060f:09d8 ds=0927
                                    ^^^^^^^^^^^^^^^^ ^^^^^^^^^ ^^^^^^^
                                    |filename        |OFSTRUCT |open mode:

                                       OF_CREATE|OF_SHARE_EXCLUSIVE|OF_READWRITE
        </screen>
        <para>
          This fails, since my <medialabel>C:</medialabel> drive is in
          this case mounted readonly.
        </para>
        <screen>
|Ret  KERNEL.74: OPENFILE() retval=0xffff ret=060f:09d8 ds=0927
                                   ^^^^^^ HFILE_ERROR16, yes, it failed.

|Call USER.1: MESSAGEBOX(0x0000,0x09278376"You must close Windows and load SHARE.EXE before you start Word.",0x00000000,0x1030) ret=060f:084f ds=0927
        </screen>
        <para>
          And MessageBox'ed.
        </para>
        <screen>
|Stopped on breakpoint 2 at 0x40189100 (MessageBoxA [msgbox.c:190])
|190     {		&lt;- the sourceline
In 32 bit mode.
Wine-dbg>
        </screen>
        <para>
          The code seems to find a writeable harddisk and tries to create
          a file there. To work around this bug, you can define
          <medialabel>C:</medialabel> as a networkdrive, which is ignored
          by the code above.
        </para>
      </sect2>

      <sect2>
        <title>Debugging Tips</title>

        <para>
          Here are some useful debugging tips, added by Andreas Mohr:
        </para>

        <itemizedlist>
          <listitem>
            <para>
              If you have a program crashing at such an early loader phase that you can't
              use the Wine debugger normally, but Wine already executes the program's
              start code, then you may use a special trick. You should do a
              <programlisting>
wine --debugmsg +relay program
              </programlisting>
              to get a listing of the functions the program calls in its start function.
              Now you do a
              <programlisting>
winedbg winfile.exe
              </programlisting>
            </para>
            <para>
              This way, you get into <command>winedbg</command>. Now you
              can set a breakpoint on any function the program calls in
              the start function and just type <userinput>c</userinput>
              to bypass the eventual calls of Winfile to this function
              until you are finally at the place where this function gets
              called by the crashing start function. Now you can proceed
              with your debugging as usual.
            </para>
          </listitem>
          <listitem>
            <para>
              If you try to run a program and it quits after showing an error messagebox,
              the problem can usually be identified in the return value of one of the
              functions executed before <function>MessageBox()</function>.
              That's why you should re-run the program with e.g.
              <programlisting>
wine --debugmsg +relay &lt;program name> &>relmsg
              </programlisting>
              Then do a <command>more relmsg</command> and search for the
              last occurrence of a call to the string "MESSAGEBOX". This is a line like
              <programlisting>
Call USER.1: MESSAGEBOX(0x0000,0x01ff1246 "Runtime error 219 at 0004:1056.",0x00000000,0x1010) ret=01f7:2160 ds=01ff
              </programlisting>
              In my example the lines before the call to
              <function>MessageBox()</function> look like that:
              <programlisting>
Call KERNEL.96: FREELIBRARY(0x0347) ret=01cf:1033 ds=01ff
CallTo16(func=033f:0072,ds=01ff,0x0000)
Ret  KERNEL.96: FREELIBRARY() retval=0x0001 ret=01cf:1033 ds=01ff
Call KERNEL.96: FREELIBRARY(0x036f) ret=01cf:1043 ds=01ff
CallTo16(func=0367:0072,ds=01ff,0x0000)
Ret  KERNEL.96: FREELIBRARY() retval=0x0001 ret=01cf:1043 ds=01ff
Call KERNEL.96: FREELIBRARY(0x031f) ret=01cf:105c ds=01ff
CallTo16(func=0317:0072,ds=01ff,0x0000)
Ret  KERNEL.96: FREELIBRARY() retval=0x0001 ret=01cf:105c ds=01ff
Call USER.171: WINHELP(0x02ac,0x01ff05b4 "COMET.HLP",0x0002,0x00000000) ret=01cf:1070 ds=01ff
CallTo16(func=0117:0080,ds=01ff)
Call WPROCS.24: TASK_RESCHEDULE() ret=00a7:0a2d ds=002b
Ret  WPROCS.24: TASK_RESCHEDULE() retval=0x0000 ret=00a7:0a2d ds=002b
Ret  USER.171: WINHELP() retval=0x0001 ret=01cf:1070 ds=01ff
Call KERNEL.96: FREELIBRARY(0x01be) ret=01df:3e29 ds=01ff
Ret  KERNEL.96: FREELIBRARY() retval=0x0000 ret=01df:3e29 ds=01ff
Call KERNEL.52: FREEPROCINSTANCE(0x02cf00ba) ret=01f7:1460 ds=01ff
Ret  KERNEL.52: FREEPROCINSTANCE() retval=0x0001 ret=01f7:1460 ds=01ff
Call USER.1: MESSAGEBOX(0x0000,0x01ff1246 "Runtime error 219 at 0004:1056.",0x00000000,0x1010) ret=01f7:2160 ds=01ff
              </programlisting>
            </para>
            <para>
              I think that the call to <function>MessageBox()</function>
              in this example is <emphasis>not</emphasis> caused by a
              wrong result value of some previously executed function
              (it's happening quite often like that), but instead the
              messagebox complains about a runtime error at
              <literal>0x0004:0x1056</literal>.
            </para>
            <para>
              As the segment value of the address is only
              <literal>4</literal>, I think that that is only an internal
              program value. But the offset address reveals something
              quite interesting: Offset <literal>1056</literal> is
              <emphasis>very</emphasis> close to the return address of
              <function>FREELIBRARY()</function>:
              <programlisting>
Call KERNEL.96: FREELIBRARY(0x031f) ret=01cf:105c ds=01ff
                                             ^^^^
              </programlisting>
            </para>
            <para>
              Provided that segment <literal>0x0004</literal> is indeed segment
              <literal>0x1cf</literal>, we now we can use IDA                 (available at
              <ulink url="http://www.filelibrary.com:8080/cgi-bin/freedownload/DOS/h/72/ida35bx.zip">
               http://www.filelibrary.com:8080/cgi-bin/freedownload/DOS/h/72/ida35bx.zip</ulink>) to
              disassemble the part that caused the error. We just have to find the address of
              the call to <function>FreeLibrary()</function>. Some lines before that the
              runtime error occurred. But be careful! In some cases you don't have to
              disassemble the main program, but instead some DLL called by it in order to find
              the correct place where the runtime error occurred. That can be determined by
              finding the origin of the segment value (in this case <literal>0x1cf</literal>).
            </para>
          </listitem>
          <listitem>
            <para>
              If you have created a relay file of some crashing
              program and want to set a breakpoint at a certain
              location which is not yet available as the program loads
              the breakpoint's segment during execution, you may set a
              breakpoint to <function>GetVersion16/32</function> as
              those functions are called very often.
            </para>
            <para>
              Then do a <userinput>c</userinput> until you are able to
              set this breakpoint without error message.
            </para>
          </listitem>
          <listitem>
            <para>
              Some useful programs:
            </para>
            <variablelist>
              <varlistentry>
                <term>
                  <application>IDA</application>:
                  <filename>
                    <ulink url="http://www.filelibrary.com:8080/cgi-bin/freedownload/DOS/h/72/ida35bx.zip">
                     http://www.filelibrary.com:8080/cgi-bin/freedownload/DOS/h/72/ida35bx.zip</ulink>
                  </filename>
                </term>
                <listitem>
                  <para>
                    <emphasis>Very</emphasis> good DOS disassembler ! It's badly needed
                    for debugging Wine sometimes.
                  </para>
                </listitem>
              </varlistentry>
              <varlistentry>
                <term>
                  <application>XRAY</application>:
                  <filename>
                    <ulink url="http://garbo.uwasa.fi/pub/pc/sysinfo/xray15.zip">
                     http://garbo.uwasa.fi/pub/pc/sysinfo/xray15.zip</ulink>
                  </filename>
                </term>
                <listitem>
                  <para>
                    Traces DOS calls (Int 21h, DPMI, ...). Use it with
                    Windows to correct file management problems etc.
                  </para>
                </listitem>
              </varlistentry>
              <varlistentry>
                <term>
                  <application>pedump</application>:
                  <filename>
                    <ulink url="ftp://ftp.simtel.net/pub/simtelnet/win95/prog/pedump.zip">
                     ftp://ftp.simtel.net/pub/simtelnet/win95/prog/pedump.zip</ulink>
                  </filename>
                </term>
                <listitem>
                  <para>
                    Dumps the imports and exports of a PE (Portable
                    Executable) DLL.
                  </para>
                </listitem>
              </varlistentry>
              <varlistentry>
                <term>
                  <application>winedump</application>:
                </term>
                <listitem>
                  <para>
                    Dumps the imports and exports of a PE (Portable
                    Executable) DLL (included in wine tree).
                  </para>
                </listitem>
              </varlistentry>
            </variablelist>
          </listitem>
        </itemizedlist>
      </sect2>

      <sect2>
        <title>Some basic debugger usages:</title>

        <para>
          After starting your program with
        </para>
        <screen>
wine -debug myprog.exe
        </screen>
        <para>
          the program loads and you get a prompt at the program
          starting point. Then you can set breakpoints:
        </para>
        <screen>
  b RoutineName      (by outine name) OR
  b *0x812575        (by address)
        </screen>
        <para>
          Then you hit <command>c</command> (continue) to run the
          program. It stops at the breakpoint. You can type
        </para>
        <screen>
  step               (to step one line) OR
  stepi              (to step one machine instruction at a time;
                      here, it helps to know the basic 386
                      instruction set)
  info reg           (to see registers)
  info stack         (to see hex values in the stack)
  info local         (to see local variables)
  list &lt;line number&gt; (to list source code)
  x &lt;variable name&gt;  (to examine a variable; only works if code
                      is not compiled with optimization)
  x 0x4269978        (to examine a memory location)
  ?                  (help)
  q                  (quit)
        </screen>
        <para>
          By hitting <keycap>Enter</keycap>, you repeat the last
          command.
        </para>
      </sect2>
    </sect1>


    <sect1 id="memory-addresses">
      <title>Useful memory addresses</title>
      <para>
        Written by &name-andreas-mohr; <email>&email-andreas-mohr;</email>
      </para>
      <para>
        Wine uses several different kinds of memory addresses.
      </para>
      <variablelist>
        <varlistentry>
          <term>
            Win32/"normal" Wine addresses/Linux: linear addresses.
          </term>
          <listitem>
            <para>
              Linear addresses can be everything from 0x0 up to
              0xffffffff.  In Wine on Linux they are often around
              e.g. 0x08000000, 0x00400000 (std. Win32 program load
              address), 0x40000000.  Every Win32 process has its own
              private 4GB address space (that is, from 0x0 up to
              0xffffffff).
            </para>
          </listitem>
        </varlistentry>
        <varlistentry>
          <term>
            Win16 "enhanced mode": segmented addresses.
          </term>
          <listitem>
            <para>
              These are the "normal" Win16 addresses, called SEGPTR.
              They have a segment:offset notation, e.g. 0x01d7:0x0012.
              The segment part usually is a "selector", which
	      <emphasis>always</emphasis>
              has the lowest 3 bits set.  Some sample selectors are
              0x1f7, 0x16f, 0x8f.  If these bits are set except for
              the lowest bit, as e.g. with 0x1f6,xi then it might be a
              handle to global memory. Just set the lowest bit to get
              the selector in these cases.  A selector kind of
              "points" to a certain linear (see above) base address.
              It has more or less three important attributes: segment
              base address, segment limit, segment access rights.
            </para>
            <para>
              Example:
            </para>
            <para>
              Selector 0x1f7 (0x40320000, 0x0000ffff, r-x) So 0x1f7
              has a base address of 0x40320000, the segment's last
              address is 0x4032ffff (limit 0xffff), and it's readable
              and executable.  So an address of 0x1f7:0x2300 would be
              the linear address of 0x40322300.
            </para>
          </listitem>
        </varlistentry>
        <varlistentry>
          <term>
            DOS/Win16 "standard mode"
          </term>
          <listitem>
            <para>
              They, too, have a segment:offset notation.  But they are
              completely different from "normal" Win16 addresses, as
              they just represent at most 1MB of memory: The segment
              part can be anything from 0 to 0xffff, and it's the same
              with the offset part.
            </para>
            <para>
              Now the strange thing is the calculation that's behind
              these addresses: Just calculate segment*16 + offset in
              order to get a "linear DOS" address.  So
              e.g. 0x0f04:0x3628 results in 0xf040 + 0x3628 = 0x12668.
              And the highest address you can get is 0xfffff (1MB), of
              course.  In Wine, this "linear DOS" address of 0x12668
              has to be added to the linear base address of the
              corresponding DOS memory allocated for dosmod in order
              to get the true linear address of a DOS seg:offs
              address.  And make sure that you're doing this in the
              correct process with the correct linear address space,
              of course ;-)
            </para>
          </listitem>
        </varlistentry>
      </variablelist>
    </sect1>

    <sect1 id="dbg-config">
      <title>Configuration</title>

      <sect2>
        <title>Registry configuration</title>

        <para>
          The Windows' debugging API uses a registry entry to know
          which debugger to invoke when an unhandled exception occurs
          (see <link endterm="dbg-exception-title"
          linkend="dbg-on-exception"></link> for some details). Two
          values in key
        </para>
        <programlisting>
"MACHINE\\Software\\Microsoft\\Windows NT\\CurrentVersion\\AeDebug"
        </programlisting>
        <para>
          Determine the behavior:
        </para>
        <variablelist>
          <varlistentry>
            <term>Debugger:</term>
            <listitem>
              <para>
                this is the command line used to launch the debugger
                (it uses two <function>printf</function> formats
                (<literal>%ld</literal>) to pass context dependent
                information to  the debugger). You should put here a
                complete path to your debugger
                (<command>WineDbg</command> can of course be used, but
                any other Windows' debugging API aware debugger will
                do).
		The path to the debugger you chose to use must be reachable
		via a DOS drive in the Wine config file !
              </para>
            </listitem>
          </varlistentry>
          <varlistentry>
            <term>Auto:</term>
            <listitem>
              <para>
                if this value is zero, a message box will ask the
                user if he/she wishes to launch the debugger when an
                unhandled exception occurs. Otherwise, the debugger
                is automatically started.
              </para>
            </listitem>
          </varlistentry>
        </variablelist>

        <para>
          A regular Wine registry looks like:
        </para>
        <programlisting>
[MACHINE\\Software\\Microsoft\\Windows NT\\CurrentVersion\\AeDebug] 957636538
"Auto"=dword:00000001
"Debugger"="winedbg --debugmsg -all %ld %ld"
        </programlisting>

        <note>
          <title>Note 1</title>
          <para>
            creating this key is mandatory. Not doing so will not
            fire the debugger when an exception occurs.
          </para>
        </note>
        <note>
          <title>Note 2</title>
          <para>
            <command>wineinstall</command> (available in Wine source)
	    sets up this correctly.
            However, due to some limitation of the registry installed,
            if a previous Wine installation exists, it's safer to
            remove the whole
          </para>
          <programlisting>
[MACHINE\\Software\\Microsoft\\Windows NT\\CurrentVersion\\AeDebug]
          </programlisting>
          <para>
            key before running again <command>wineinstall</command> to
            regenerate this key.
          </para>
        </note>
      </sect2>

      <sect2>
        <title>WineDbg configuration</title>

        <para>
          <command>WineDbg</command> can be configured through a number
          of options. Those options are stored in the registry, on a
          per user basis. The key is (in <emphasis>my</emphasis> registry)
        </para>
        <programlisting>
[eric\\Software\\Wine\\WineDbg]
        </programlisting>
        <para>
          Those options can be read/written while inside
          <command>WineDbg</command>, as part of the debugger
          expressions. To refer to one of these options, its name must
          be  prefixed by a <literal>$</literal> sign. For example,
        </para>
        <programlisting>
set $BreakAllThreadsStartup = 1
        </programlisting>
        <para>
          sets the option <varname>BreakAllThreadsStartup</varname> to
          <literal>TRUE</literal>.
        </para>
        <para>
          All the options are read from the registry when
          <command>WineDbg</command> starts (if no corresponding value
          is found, a default value is used), and are written back to
          the registry when <command>WineDbg</command> exits (hence,
          all modifications to those options are automatically saved
          when <command>WineDbg</command> terminates).
        </para>
        <para>
          Here's the list of all options:
        </para>

        <sect3>
          <title>Controlling when the debugger is entered</title>

          <variablelist>
            <varlistentry>
              <term><varname>BreakAllThreadsStartup</varname></term>
              <listitem>
                <para>
                  Set to <literal>TRUE</literal> if at all threads
                  start-up the debugger stops  set to
                  <literal>FALSE</literal> if only at the first thread
                  startup of a given process the debugger stops.
                  <literal>FALSE</literal> by default.
                </para>
              </listitem>
            </varlistentry>
            <varlistentry>
              <term><varname>BreakOnCritSectTimeOut</varname></term>
              <listitem>
                <para>
                  Set to <literal>TRUE</literal> if the debugger stops
                  when a critical section times out (5 minutes);
                  <literal>TRUE</literal> by default.
                </para>
              </listitem>
            </varlistentry>
            <varlistentry>
              <term><varname>BreakOnAttach</varname></term>
              <listitem>
                <para>
                  Set to <literal>TRUE</literal> if when
                  <command>WineDbg</command> attaches to an existing
                  process after an unhandled exception,
                  <command>WineDbg</command> shall be entered on the
                  first attach event. Since the attach event is
                  meaningless in the context of an exception event
                  (the next event  which is the exception event is of
                  course relevant), that option is likely to be
                  <literal>FALSE</literal>.
                </para>
              </listitem>
            </varlistentry>
            <varlistentry>
              <term><varname>BreakOnFirstChance</varname></term>
              <listitem>
                <para>
                  An exception can generate two debug events. The
                  first one is passed to the debugger (known as a
                  first chance) just after the exception. The debugger
                  can then decides either to resume execution (see
                  <command>WineDbg</command>'s <command>cont</command>
                  command) or pass the exception up to the exception
                  handler chain in the program (if it exists)
                  (<command>WineDbg</command> implements this through the
                  <command>pass</command> command). If none of the
                  exception handlers takes care of the exception, the
                  exception event is sent again to the debugger (known
                  as last chance exception). You cannot pass on a last
                  exception. When the
                  <varname>BreakOnFirstChance</varname> exception is
                  <literal>TRUE</literal>, then winedbg is entered for
                  both first and last chance execptions (to
                  <literal>FALSE</literal>, it's only entered for last
                  chance exceptions).
                </para>
              </listitem>
            </varlistentry>
            <varlistentry>
              <term><varname>BreakOnDllLoad</varname></term>
              <listitem>
                <para>
                  Set to <literal>TRUE</literal> if the debugger stops
                  when a DLL is loaded into memory; when the debugger
                  is invoked after a crash, the DLLs already mapped in
                  memory will not trigger this break.
                  <literal>FALSE</literal> by default.
                </para>
              </listitem>
            </varlistentry>
          </variablelist>
        </sect3>

        <sect3>
          <title>Output handling</title>

          <variablelist>
            <varlistentry>
              <term><varname>ConChannelMask</varname></term>
              <listitem>
                <para>
                  Mask of active debugger output channels on console
                </para>
              </listitem>
            </varlistentry>
            <varlistentry>
              <term><varname>StdChannelMask</varname></term>
              <listitem>
                <para>
                  Mask of active debugger output channels on <filename>stderr</filename>
                </para>
              </listitem>
            </varlistentry>
          </variablelist>

          <para>
            Those last 2 variables are jointly used in two generic ways:
          </para>

          <orderedlist>
            <listitem>
              <para>
                default
              </para>
              <programlisting>
ConChannelMask = DBG_CHN_MESG (1)
StdChannelMask = 0
              </programlisting>
              <para>
                In this case, all input/output goes into the
                debugger's console (either the standard unix console
                if winedbg is started from the command line, or a
                specific windowed-console if the debugger is started
                upon an exception in a running program. All debug
                messages <function>TRACE</function>,
                <function>WARN</function>... still goes to tty where
                wine is run from).
              </para>
            </listitem>
            <listitem>
              <para>
                To have all input/output go into the tty where Wine
                was started from (to be used in a X11-free
                environment)
              </para>
              <screen>
ConChannelMask = 0
StdChannelMask = DBG_CHN_MESG (1)
              </screen>
            </listitem>
          </orderedlist>
        </sect3>

        <sect3>
          <title>Context information</title>

          <variablelist>
            <varlistentry>
              <term><varname>ThreadId</varname></term>
              <listitem>
                <para>
                  ID of the <varname>W-thread</varname> currently
                  examined by the debugger
                </para>
              </listitem>
            </varlistentry>
            <varlistentry>
              <term><varname>ProcessId</varname></term>
              <listitem>
                <para>
                  ID of the <varname>W-thread</varname> currently
                  examined by the debugger
                </para>
              </listitem>
            </varlistentry>
            <varlistentry>
              <term>&lt;registers></term>
              <listitem>
                <para>
                  All CPU registers are also available
                </para>
              </listitem>
            </varlistentry>
          </variablelist>

          <para>
            The <varname>ThreadId</varname> and
            <varname>ProcessId</varname> variables can be handy to set
            conditional breakpoints on a given thread or process.
          </para>
        </sect3>
      </sect2>
    </sect1>


    <sect1 id="dbg-commands">
      <title>WineDbg Command Reference</title>

      <sect2>
        <title>Misc</title>

        <screen>
abort		aborts the debugger
quit		exits the debugger

attach N	attach to a W-process (N is its ID). IDs can be
		obtained using the walk process command
detach          detach from a W-process. WineDbg will exit (this may
                be changed later on)
        </screen>
        <screen>
help		prints some help on the commands
help info	prints some help on info commands
        </screen>
        <screen>
mode 16		switch to 16 bit mode
mode 32		switch to 32 bit mode
        </screen>
      </sect2>

      <sect2>
        <title>Flow control</title>

        <screen>
cont		continue execution until next breakpoint or exception.
pass		pass the exception event up to the filter chain.
step		continue execution until next C line of code (enters
		function call)
next 		continue execution until next C line of code (doesn't
		enter function call)
stepi		execute next assembly instruction (enters function
		call)
nexti		execute next assembly instruction (doesn't enter
		function call)
finish		do nexti commands until current function is exited
        </screen>
        <para>
          cont, step, next, stepi, nexti can be postfixed by a
          number (N), meaning that the command must be executed N
          times.
        </para>
      </sect2>

      <sect2>
        <title>Breakpoints, watch points</title>

        <screen>
enable N	enables (break|watch)point #N
disable N	disables (break|watch)point #N
delete N	deletes  (break|watch)point #N
cond N		removes any a existing condition to (break|watch)point N
cond N &lt;expr&gt;	adds condition &lt;expr&gt; to (break|watch)point N. &lt;expr&gt;
		will be evaluated each time the breakpoint is hit. If
		the result is a zero value, the breakpoint isn't
		triggered
break * N	adds a breakpoint at address N
break &lt;id&gt;	adds a breakpoint at the address of symbol &lt;id&gt;
break &lt;id&gt; N	adds a breakpoint at the address of symbol &lt;id&gt; (N ?)
break N		adds a breakpoint at line N of current source file
break		adds a breakpoint at current $pc address
watch * N	adds a watch command (on write) at address N (on 4 bytes)
watch &lt;id&gt;	adds a watch command (on write) at the address of
		symbol &lt;id&gt;
info break	lists all (break|watch)points (with state)
        </screen>
	<para>
	  When setting a breakpoint on an &lt;id&gt;, if several symbols with this
	  &lt;id&gt; exist, the debugger will prompt for the symbol you want to use.
	  Pick up the one you want from its number.
	</para>
        <para>
          Alternatively you can specify a DLL in the &lt;id&gt; (for example
          MYDLL.DLL.myFunc for function myFunc of
          <filename>G:\AnyPath\MyDll.dll)</filename>.
        </para>
        <para>
          You can use the symbol <emphasis>EntryPoint</emphasis> to stand for
          the entry point of the Dll.
        </para>
	<para>
          When setting a break/watch-point by &lt;id&gt;, if the symbol cannot be found (for example, the symbol is contained in a not yet loaded module), winedbg will
          recall the name of the symbol and will try to set the breakpoint each time a new module is loaded (until it succeeds).
        </para>
      </sect2>

      <sect2>
        <title>Stack manipulation</title>

        <screen>
bt		print calling stack of current thread
bt N		print calling stack of thread of ID N (note: this
                doesn't change the position of the current frame as
		manipulated by the up & dn commands)
up		goes up one frame in current thread's stack
up N		goes up N frames in current thread's stack
dn		goes down one frame in current thread's stack
dn N		goes down N frames in current thread's stack
frame N		set N as the current frame for current thread's stack
info local	prints information on local variables for current
		function
        </screen>
      </sect2>

      <sect2>
        <title>Directory & source file manipulation</title>

        <screen>
show dir
dir &lt;pathname&gt;
dir
symbolfile &lt;pathname&gt;   loads external symbol definition
symbolfile &lt;pathname&gt; N loads external symbol definition
                           (applying an offset of N to addresses)
        </screen>
        <screen>
list		lists 10 source lines from current position
list - 		lists 10 source lines before current position
list N		lists 10 source lines from line N in current file
list &lt;path&gt;:N	lists 10 source lines from line N in file &lt;path&gt;
list &lt;id&gt;	lists 10 source lines of function &lt;id&gt;
list * N	lists 10 source lines from address N
        </screen>
        <para>
          You can specify the end target (to change the 10 lines
          value) using the ','. For example:
        </para>
        <screen>
list 123, 234 	lists source lines from line 123 up to line 234 in
		current file
list foo.c:1,56	lists source lines from line 1 up to 56 in file foo.c
        </screen>
      </sect2>

      <sect2>
        <title>Displaying</title>

        <para>
          A display is an expression that's evaluated and printed
          after the execution of any <command>WineDbg</command>
          command.
        </para>
        <screen>
display		lists the active displays
info display	(same as above command)
display &lt;expr&gt;	adds a display for expression &lt;expr&gt;
display /fmt &lt;expr&gt;	adds a display for expression &lt;expr&gt;. Printing
		evaluated &lt;expr&gt; is done using the given format (see
		print command for more on formats)
del display N	deletes display #N
undisplay N	(same as del display)
        </screen>
      </sect2>

      <sect2>
        <title>Disassembly</title>

        <screen>
disas		disassemble from current position
disas &lt;expr&gt;	disassemble from address &lt;expr&gt;
disas &lt;expr&gt;,&lt;expr&gt;disassembles code between addresses specified by
		the two &lt;expr&gt;
        </screen>
      </sect2>

      <sect2>
        <title>Information on Wine's internals</title>

        <screen>
info class &lt;id&gt; prints information on Windows's class &lt;id&gt;
walk class	lists all Windows' class registered in Wine
info share	lists all the dynamic libraries loaded the debugged
		program (including .so files, NE and PE DLLs)
info module &lt;N&gt; prints information on module of handle &lt;N&gt;
walk module	lists all modules loaded by debugged program
info regs	prints the value of CPU register
info segment &lt;N&gt;prints information on segment &lt;N&gt;
info segment	lists all allocated segments
info stack	prints the values on top of the stack
walk map	lists all virtual mappings used by the debugged
		program
walk map &lt;N&gt;    lists all virtual mappings used by the program of pid &lt;N&gt;
info wnd &lt;N&gt;    prints information of Window of handle &lt;N&gt;
walk wnd	lists all the window hierarchy starting from the
		desktop window
walk wnd &lt;N&gt;    lists all the window hierarchy starting from the
		window of handle &lt;N&gt;
walk process	lists all w-processes in Wine session
walk thread	lists all w-threads in Wine session
walk exception  lists the exception frames (starting from current
                stack frame)
        </screen>
      </sect2>

      <sect2>
        <title>Memory (reading, writing, typing)</title>

        <screen>
x &lt;expr&gt;	examines memory at &lt;expr&gt; address
x /fmt &lt;expr&gt;	examines memory at &lt;expr&gt; address using format /fmt
print &lt;expr&gt;	prints the value of &lt;expr&gt; (possibly using its type)
print /fmt &lt;expr&gt;	prints the value of &lt;expr&gt; (possibly using its
		type)
set &lt;lval&gt;=&lt;expr&gt;	writes the value of &lt;expr&gt; in &lt;lval&gt;
whatis &lt;expr&gt;	prints the C type of expression &lt;expr&gt;
        </screen>
        <para>
          <filename>/fmt</filename> is either <filename>/&lt;letter&gt;</filename> or
          <filename>/&lt;count&gt;&lt;letter&gt;</filename> letter can be
        </para>
        <screen>
s =&gt; an ASCII string
u =&gt; an Unicode UTF16 string
i =&gt; instructions (disassemble)
x =&gt; 32 bit unsigned hexadecimal integer
d =&gt; 32 bit signed decimal integer
w =&gt; 16 bit unsigned hexadecimal integer
c =&gt; character (only printable 0x20-0x7f are actually printed)
b =&gt; 8 bit unsigned hexadecimal integer
g =&gt; GUID
        </screen>
      </sect2>

      <sect2>
	<title>Expressions</title>

	<para>
	  Expressions in Wine Debugger are mostly written in a C form. However, there
	  are a few discrepancies:
	  <itemizedlist>
	    <listitem>
	      <para>
		Identifiers can take a '.' in their names. This allow
		mainly to access symbols from different DLLs like
		<function>USER32.DLL.CreateWindowA</function>.
	      </para>
	    </listitem>
	    <listitem>
	      <para>
	        The debugger will try to distinguish this writing with structure operations.
		Therefore, you can only use the previous writing in operations manipulating
		symbols ({break|watch}points, type information command...).
	      </para>
	    </listitem>
	  </itemizedlist>
	</para>
      </sect2>
      <sect2>
          <title>Debug channels</title>
	      <para>
               It is possible to turn on and off debug messages as you are debugging using
               the set command.
              </para>
            <screen>
set + warn win	=&gt; turn on warn on 'win' channel
set + win	=&gt; turn on warn/fixme/err/trace on 'win' channel
set - win	=&gt; turn off warn/fixme/err/trace on 'win' channel
set - fixme	=&gt; turn off the 'fixme' class
            </screen>
      </sect2>

    </sect1>

    <sect1 id="dbg-others">
      <title>Other debuggers</title>

      <sect2>
        <title>GDB mode</title>

        <para>
	  WineDbg can act as a remote monitor for GDB. This allows to
	  use all the power of GDB, but while debugging wine and/or
	  any Win32 application. To enable this mode, just add
	  <parameter>--gdb</parameter> to winedbg command line. You'll
	  end up on a GDB prompt. You'll have to use the GDB commands
	  (not the wine nes).
	</para>

	<para>
	  However, some limitation in GDB while debugging wine (see
	  below) don't appear in this mode:
	  <itemizedlist>
	    <listitem>
	      <para>
		GDB will correctly present Win32 thread
		information and breakpoint behavior
	      </para> 
	    </listitem>
	    <listitem>
	      <para>
		Moreover, it also provides support for the Dwarf II
		debug format (which became the default format (instead
		of stabs) in gcc 3.1). 
	      </para>
	    </listitem>
	  </itemizedlist>
	</para>

	<para>
	  A few wine extensions available through the monitor command.
<screen>
monitor wnd           lists all window in the Wine session
monitor proc          lists all processes in the Wine session
monitor mem           displays memory mapping of debugged process
                      (doesn't work)
</screen>
	</para>
      </sect2>

      <sect2>
	<title>Graphical frontends to gdb</title>

	<para>
          This section will describe how you can debug wine using the
          GDB mode of winedbg and some graphical front ends to GDB for
          those of you who really like graphical debuggers.
        </para>

	<sect3>
	  <title>DDD</title>
	  
	  <para>
            Use the following steps, in this order:
<orderedlist>
	      <listitem>
		<para>
Start the wine debugger with a command line
like:
<screen>
	winedbg -- --gdb --no-start &lt;name_of_exe_to_debug.exe&gt;
</screen>
</para>
	      </listitem>
	      <listitem>
		<para>
                  Start ddd
                </para>
	      </listitem>
	      <listitem>
		<para>
		  In ddd, use the 'Open File' or 'Open Program' to
                  point to the wine executable
		</para>
	      </listitem>
	      <listitem>
		<para>
In the output of 1/, there's a line like 
<screen>
	target remote localhost:32878
</screen>
copy that line and paste into ddd command pane (the one with the (gdb)
prompt)
</para>
	      </listitem>
	    </orderedlist>
The program should now be loaded and up and running. If you want, you
can also add in 1/ after the name of the exec all the needed
parameters
          </para>
	</sect3>
	<sect3>
	  <title>kdbg</title>
	  
	  <para>
            Use the following steps, in this order:
            <orderedlist>
	      <listitem>
		<para>
                  Start the wine debugger with a command line like:
<screen>
	winedbg -- --gdb --no-start &lt;name_of_exe_to_debug.exe&gt;
</screen>
</para>
	      </listitem>
	      <listitem>
		<para>
		  In the output of 1/, there's a line like 
<screen>
	target remote localhost:32878
</screen>
Start kdbg with
<screen>
kdbg -r localhost:32878 wine
</screen>
localhost:32878 is not a fixed value, but has been printed in step
1/. 'wine' should also be the full path to the wine executable.
</para>
	      </listitem>
	    </orderedlist>
The program should now be loaded and up and running. If you want, you
can also add in 1/ after the name of the exec all the needed
parameters
          </para>
	</sect3>
      </sect2>
	
      <sect2>
        <title>Using other Unix debuggers</title>

        <para>
          You can also use other debuggers (like
          <command>gdb</command>), but you must be aware of a few
          items:
        </para>
        <para>
          You need to attach the unix debugger to the correct unix
          process (representing the correct windows thread) (you can
          "guess" it from a <command>ps fax</command> for example:
          When running the emulator, usually the first two
          <varname>upids</varname> are for the Windows' application
          running the desktop, the first thread of the application is
          generally the third <varname>upid</varname>; when running a
          Winelib program, the first thread of the application is
          generally the first <varname>upid</varname>)
        </para>
        <note>
          <para>
            Even if latest <command>gdb</command> implements the
            notion of threads, it won't work with Wine because the
            thread abstraction used for implementing Windows' thread
            is not 100% mapped onto the Linux POSIX threads
            implementation. It means that you'll have to spawn a
            different <command>gdb</command> session for each Windows'
            thread you wish to debug.
          </para>
        </note>

        <!-- *** Extra content spliced in from article by Andreas Mohr *** -->
        <para>
          Following text written by &name-andreas-mohr; <email>&email-andreas-mohr;</email>
        </para>
        <para>
          Here's how to get info about the current execution status of a
          certain Wine process:
        </para>
        <para>
          Change into your Wine source dir and enter:
        </para>
        <screen>
$ gdb wine
        </screen>
        <para>
          Switch to another console and enter <command>ps ax | grep
            wine</command> to find all wine processes. Inside
          <command>gdb</command>, repeat for all Wine processes:
        </para>
        <screen>
(gdb) attach <userinput>PID</userinput>
        </screen>
        <para>
          with <userinput>PID</userinput> being the process ID of one of
          the Wine processes.  Use
        </para>
        <screen>
(gdb) bt
        </screen>
        <para>
          to get the backtrace of the current Wine process, i.e. the
          function call history.  That way you can find out what the
          current process is doing right now.  And then you can use
          several times:
        </para>
        <screen>
(gdb) n
        </screen>
        <para>
          or maybe even
        </para>
        <screen>
(gdb) b <userinput>SomeFunction</userinput>
        </screen>
        <para>
          and
        </para>
        <screen>
(gdb) c
        </screen>
        <para>
          to set a breakpoint at a certain function and continue up to
          that function.  Finally you can enter
        </para>
        <screen>
(gdb) detach
        </screen>
        <para>
          to detach from the Wine process.
        </para>
        <!-- *** End of xtra content *** -->
      </sect2>

      <sect2>
        <title>Using other Windows debuggers</title>

        <para>
          You can use any Windows' debugging API compliant debugger
          with Wine. Some reports have been made of success with
          VisualStudio debugger (in remote mode, only the hub runs
          in Wine). GoVest fully runs in Wine.
        </para>
      </sect2>

      <sect2>
        <title>Main differences between winedbg and regular Unix debuggers</title>
	<table><title>Debuggers comparison</title>
	  <tgroup cols=2 align="left">
	    <tbody>
	      <row>
		<entry>WineDbg</entry><entry>gdb</entry>
	      </row>
	      <row>
		<entry>
		  WineDbg debugs a Windows' process: the various
		  threads will be handled by the same WineDbg session,
		  and a breakpoint will be triggered for any thread of
		  the W-process 
                </entry>
	        <entry>
		  gdb debugs a Windows' thread: a separate gdb session
		  is needed for each thread of a Windows' process and
		  a breakpoint will be triggered only for the w-thread
		  debugged 
                </entry>
	      </row>
	      <row>
		<entry>
		  WineDbg supports debug information from stabs
		  (standard Unix format) and Microsoft's C, CodeView,
		  .DBG
                </entry>
		<entry>
		  GDB supports debug information from stabs (standard
		  Unix format) and Dwarf II.
                </entry>
	      </row>
            </tbody>
          </tgroup>
        </table>
      </sect2>
    </sect1>


    <sect1 id="dbg-limits">
      <title>Limitations</title>

      <itemizedlist>
	<listitem>
	  <para>
	    16 bit processes are not supported (but calls to 16 bit
	    code in 32 bit  applications are).
	  </para>
	</listitem>
	<listitem>
	  <para>
	    Function call in expression is no longer supported
	  </para>
	</listitem>
      </itemizedlist>
    </sect1>
  </chapter>

<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-parent-document:("wine-devel.sgml" "set" "book" "part" "chapter" "")
End:
-->