This is a preparation for handling `DeltaSetIdxMap` and `VarStore` as a
FreeType service.
* src/truetype/ttgxvar.c (ft_var_done_delta_set_index_map): New function.
(tt_done_blend): Use it.
This was introduced in OpenType 1.8.4.
* src/truetype/ttgxvar.c (ft_var_load_delta_set_index_mapping,
tt_hvadvance_adjust, ft_var_load_mvar, tt_apply_mvar): Handle special
inner/outer index values.
(ft_var_load_item_variation_store): Add test.
Fixes#1154.
* src/base/ftrfork.c (raccess_make_file_name): Do not set error.
* src/sfnt/sfdriver.c (get_win_string, get_apple_string): Ditto.
* src/cff/cffobjs.c (cff_strcpy): Do not confuse about error.
* src/psaux/psobjs.c (ps_table_done): Ditto.
* src/truetype/ttgxvar.c (ft_var_readpacked*, ft_var_load_avar): Ditto.
When iterating over the cvt tuples and reading in the points it is necessary
to set all of `localpoints`, `points`, and `point_count` in all cases. The
existing code did not reset `localpoints` to `NULL` when there were no
private point numbers. If the previous tuple did have private point numbers
and set `localpoints` to `ALL_POINTS` this would not be cleared and the
wrong branch would be taken later, leading to possible heap buffer overflow.
* src/truetype/ttgxvar.c (tt_face_vary_cvt): Reset `localpoints` to `NULL`
when it isn't valid.
Fixes: https://crbug.com/1284742
* src/truetype/ttgxvar.c (ft_var_load_item_variation_store):
s/shortDeltaCount/wordDeltaCount/ (as done in the specification, too).
Recognize new format and reject it for now.
This is in preparation for implementing `DeltaSetIndexMap` format 1, which
is used by `COLR` v1 tables, and which allows 32bit indices.
https://docs.microsoft.com/en-us/typography/opentype/otspec190/delta/otvarcommonformats_delta.html
* src/truetype/ttgxvar.h (GX_DeltaSetIdxMapRec): Change type of `mapCount`
to `FT_ULong`.
* src/truetype/ttgxvar.c (ft_var_load_delta_set_index_mapping): Add argument
for passing the table size; update caller.
Implement new format.
* src/truetype/ttgxvar.c (ft_var_readpackeddeltas, ft_var_load_avar,
ft_var_load_item_variation_store, ft_var_load_gvar): Use FT_QNEW_ARRAY
if memory immediately initialized or discarded otherwise.
* src/truetype/ttgxvar (ft_var_readpackeddeltas): Don't expect the number of
bytes used to encode the deltas to be higher than the number of encoded
values. The specification allows a very compact encoding; for example, a
list of 200 zeros can be encoded with just a couple of bytes.
We now count the consumed bytes to make sure to not read more than expected.
* src/truetype/ttgxvar (tt_face_vary_cvt): Function
`ft_var_readpackedpoints`, when it returns `ALL_POINTS`, also sets
`point_count` to value 0. However, the CVAR code was incorrectly expecting
that `point_count` would be set to match the length of the CVT table.
It is undefined behavior to pass `NULL` to `memcpy`. `coords' is
passed to `memcpy` but `TT_Get_MM_Blend` and `TT_Get_Var_Design`
explictly call `tt_set_mm_blend` with `coords` as `NULL`. In
addition, `TT_Set_MM_Blend` has a similar possible issue.
This ensures good logging output, with all lines having a proper
prefix (if requested).
This is a continuation of a similar patch from 2020-12-02, which
missed some locations.
We no longer have to take care of the 8.3 file name limit; this
allows us (a) to introduce longer, meaningful file names, and (b) to
avoid macro names in `#include' lines altogether since some
compilers (most notably Visual C++) doesn't support this properly.
*/*: Replace
#include FOO_H
with
#include <freetype/foo.h>
or something similar. Also update the documentation.
By resetting the blend as implemented with this commit fonts with
invalid `gvar' tables may keep calling into `ft_var_load_gvar' from
`tt_set_mm_blend' and failing, but the font was invalid anyway and
we want to keep seeing the failure in `tt_set_mm_blend'.
* src/truetype/ttgxvar.c (ft_var_load_gvar): Calculate length of
offset array once.
Allocate arrays after `FT_FRAME_ENTER' (extra check before
allocating and avoid needing to free array later if error entering
frame).
Always call `FT_FRAME_EXIT'.
Consistently set counts immediately after array initialized.
Reset the blend (particularly `blend->glyphoffsets') on failure.
* src/truetype/ttgxvar.c (ft_var_load_gvar): Delay settings of any
`blend->xxxcount' values until the corresponding data has been
checked.
Also do some sanitizing to avoid a too early exit.
(TT_Vary_Apply_Glyph_Deltas): Improve tracing message.
Up to now, only the unscaled CVT values were varied; in other words,
the `CVAR' data was never used for bytecode hinting.
* src/truetype/ttgxvar.c (tt_cvt_ready_iterator): New auxiliary
function.
(tt_face_vary_cvt): Use it to trigger rescaling of CVT values.
If `CVAR' data is applied to variation fonts, fractional values are
possible.
* include/freetype/internal/tttypes.h (TT_FaceRec): Change type of
`cvt' from `FT_Short' to `FT_Int32'.
* src/truetype/ttgxvar.c (FT_fdot6ToFixed): New macro.
(tt_face_vary_cvt): Use it to update code to 26.6 format.
* src/truetype/ttobjs.c (tt_size_run_prep): Update code to 26.6
format.
* src/truetype/ttpload.c (tt_face_load_cvt): Stora data in 26.6
format.
Very embarassing :-)
Reported as
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14701https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14705https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14710
* src/truetype/ttgload.c (IS_DEFAULT_INSTANCE): Move up and add
argument; update all callers.
(TT_Process_Simple_Glyph): Use it. The `unrounded' array is active
for variation fonts only, thus also enclose related code with
`#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT ... #endif' where
necessary.
Revert commit a113e5d from 2019-05-09, and don't use `extra_points2'
but allocate a temporary array.
Speed up the scaling of the `unrounded' array.
* src/truetype/ttgxvar.c (FT_fixedToInt, FT_FixedToFdot6): Fix type
conversions and rounding. The unsigned type must have more or equal
bits to the signed type.
This patch make FreeType use font units in 26.6 format internally
instead of integers.
* src/truetype/ttgxvar.c (FT_fixedToFdot6): New macro.
(TT_Vary_Apply_Glyph_Deltas): Add argument to output unrounded font
coordinates.
* src/truetype/ttgxvar.h: Updated.
* src/truetype/ttgload.c (TT_Process_Simple_Glyph): Use
`extra_points2' array to temporarily hold unrounded point
coordinates; use them to compute scaled coordinates and linear
advance width and height.
(load_truetype_code): Adjust similarly.
Reported by Sender Ghost <lightside@gmx.com>.
* src/autofit/afcjk.c (af_cjk_hints_compute_edges): Catch a corner
case where `edge->first' could be NULL.
* src/pfr/pfrobjs.c (pfr_slot_load): Remove unnecessary test of
`size'.
* src/raster/ftraster.c (Draw_Sweep): Catch a corner case where
`draw_right' might be NULL.
* src/sfnt/ttmtx.c (tt_face_get_metrics): Fix limit test for
`aadvance'.
Ensure `abearing' always hold a meaningful result.
* src/truetype/ttgload.c (load_truetype_glyph): Ensure `subglyph' is
not NULL before accessing it.
* src/truetype/ttgxvar.c (TT_Set_Named_Instance): Remove unnecessary
test of `namedstyle'.
* src/type42/t42parse.c (t42_parser_done): Ensure
`parser->root.funcs.done' is not NULL before accessing it.
Instead of setting typo or win metrics as the new FT_Face metrics
indiscriminately, apply only typo deltas to the currently active FT_Face
metrics. This prevents line height differences when e.g. the default
outlines were used as the regular face and instances for everything else.
* src/truetype/ttgxvar.c (tt_apply_mvar): Implement.
Dominik Röttsches