The functions in this patch *do* return non-trivial errors that must
be taken care of.
* src/autofit/afloader.c (af_loader_load_g), src/base/ftobjs.c
(FT_Render_Glyph_Internal), src/base/ftoutln.c (FT_Outline_Render),
src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_endchar>,
src/psaux/psobjs.c (ps_parser_load_field_table), src/psaux/t1decode
(t1_decoder_parse_charstrings) <op_endchar>, src/truetype/ttgload.c
(load_truetype_glyph <subglyph loop>, tt_loader_init,
TT_Load_Glyph), src/truetype/ttgxvar.c (TT_Set_MM_Blend),
src/truetype/ttobjs.c (tt_size_run_fpgm, tt_size_run_prep): Do it.
We use a cast to indicate that we intentionally ignore a function's
return value. However, this doesn't apply to API functions where
errors can only happen for trivially invalid input.
* src/base/ftstroke.c (FT_Glyph_Stroke, FT_Glyph_StrokeBorder),
src/base/ftsynth.c (FT_GlyphSlot_Embolden), src/cff/cffgload.c
(cff_slot_load), src/pfr/pfrdrivr.c (pfr_get_kerning),
src/type1/t1load.c (parse_encoding), src/type42/t42parse.c
(t42_parse_encoding): Do it.
The scaling between the hypotenuse and its CORDIC approximation is
based on regression analysis. The smaller padding for `theta' is
justifed by its maximum error of less than 6.
* src/base/fttrigon.c (ft_trig_downscale): Borrow code from
./ftcalc.c (ft_multo64), change linear intercept.
(ft_trig_pseudo_polarize): Decrease `theta' padding.
* include/internal/ftcalc.h (FT_HYPOT): Macro to approximate Euclidean
distance with the alpha max plus beta min algorithm.
* src/base/ftcalc.c (ft_corner_is_flat): Use it instead of Taxicab metric.
We shift as many bits as we can into the high register, perform
32-bit division with modulo there, then work through the remaining
bits with long division. This optimization is especially noticeable
for smaller dividends that barely use the high register.
* src/base/ftcalc.c (ft_div64by32): Updated.
This applies to `FT_MulDiv' but not to `FT_DivFix', where overflows or
lack thereof are predicted accurately.
* src/base/ftcalc.c (ft_div64by32): Improve readability.
(FT_MulDiv, FT_MulDiv_No_Round) [!FT_LONG64]: Use straight division
when multiplication stayed within 32 bits.
This fixes a 13-year old bug. The original overflow check should have
been updated when rounding was introduced into this function
(c2cd00443b).
* src/base/ftcalc.c (FT_DivFix) [!FT_LONG64]: Updated.
* include/freetype.h (FT_DivFix): Updated documentation.
* include/freetype.h (FT_MulFix): Unconditionally defined.
* src/base/ftcalc.c [FT_MULFIX_ASSEMBLER]: Move code from here...
* include/internal/ftcalc.h [FT_MULFIX_ASSEMBLER]: ... to here,
which conditionally replaces the function with an inline version
through the macro.
* src/pfr/pfrobjs.c (pfr_face_get_kerning): Use `FT_MSB' instead of
`ft_highpow2'.
* src/base/ftutil.c, include/internal/ftobjs.h (ft_highpow2): Remove
it.
FT_MulFix assembler used to reside in ftcalc.c before f47d263f1b.
* include/config/ftconfig.h, builds/unix/ftconfig.in,
builds/vms/ftconfig.h [FT_MULFIX_ASSEMBLER]: Move code from here...
* src/base/ftcalc.c [FT_MULFIX_ASSEMBLER]: ... to here.
The fragmented resources in Suitcase and .dfont should be reordered
when post resource for Type1 is being restored, but reordering of
sfnt resources induces the different face order. Now the ordering
is restricted to post resource only, to prevent the different order
issue (e.g. the face index in the fontconfig cache generated with
Carbon framework is incompatible with that by FreeType2 without
Carbon framework.) Found by Khaled Hosny and Hin-Tak Leung.
http://lists.gnu.org/archive/html/freetype-devel/2013-02/msg00035.htmlhttp://lists.gnu.org/archive/html/freetype-devel/2013-12/msg00027.html
* src/base/ftrfork.c (FT_Raccess_Get_DataOffsets): Add a switch
`sort_by_res_id' to control the fragmented resource ordering.
* include/internal/ftrfork.h: Daclare new switch.
* src/base/ftobjs.c (IsMacResource): Enable the soring for post
resource, and disable the sorting for sfnt resource.
* include/internal/ftrfork.h (CONST_FT_RFORK_RULE_ARRAY_BEGIN): Fix
generated function name.
* src/base/basepic.c (FT_Init_Table_raccess_guess_table): Rename
to ...
(FT_Init_Table_ft_raccess_guess_table): ... this so that the
function name correctly corresponds to what the macro framework
expects.
* src/psnames/rules.mk (PSNAMES_DRV_SRC_S): Use correct file name so
that PIC functions are compiled also.
Problem reported by Hin-Tak Leung <htl10@users.sourceforge.net>; see
http://lists.nongnu.org/archive/html/freetype-devel/2013-08/msg00005.html
for details.
* src/base/ftobjs.c (FT_Load_Glyph): Check size of `fpgm' and `prep'
tables also for setting `autohint'.
* src/truetype/ttgload.c (TT_Load_Simple_Glyph): Use code from
`TT_Process_Composite_Glyph' for handling unreliable values of
`maxSizeOfInstructions'.
This large patch changes the header file directory layout from
`include/freetype/...' to `include/...', effectively removing one
level. Since the file `ft2build.h' is also located in `include'
(and it stays there even after installation), all FreeType header
files are now in a single directory.
Applications that use (a) `freetype-config' or FreeType's
`pkg-config' file to get the include directory for the compiler, and
(b) the documented way for header inclusion like
#include <ft2build.h>
#include FT_FREETYPE_H
...
don't need any change to the source code.
* include/freetype/*: Move up to...
* include/*: ... this directory.
* builds/amiga/include/freetype/*: Move up to...
* builds/amiga/include/*: ... this directory.
*/*: Essentially do `s@/freetype/@/@' where appropriate.
* CMakeList.txt: Simplify.
* builds/unix/freetype-config.in, builds/unix/freetype2.in: For
`--cflags', return a single directory.
* builds/unix/install.mk (install): No longer try to remove `cache'
and `internal' subdirectories; instead, remove the `freetype'
subdirectory.
We simply synthesize a SFNT from the WOFF, create a memory stream
for the new data, and load the SFNT as usual.
Does NOT add any API to access WOFF metadata or private blocks.
* include/freetype/internal/tttypes.h (WOFF_HeaderRec,
WOFF_TableRec): New structures.
* include/freetype/tttags.h (TTAG_wOFF): New macro.
* src/base/ftobjs.c (FT_Open_Face): Set `stream' after calling
`open_face'.
* src/sfnt/sfobjs.c [FT_CONFIG_OPTION_SYSTEM_ZLIB]: Include
`FT_GZIP_H'.
(WRITE_BYTE, WRITE_USHORT, WRITE_ULONG): New temporary macros for
writing to a stream.
(sfnt_stream_close, compare_offsets, woff_open_font): New functions.
(sfnt_open_font): Handle `TTAG_wOFF'.
(sfnt_init_face): Set `stream' after calling `sfnt_open_font'.
* src/truetype/ttobjs.c (tt_face_init): Set `stream' after calling
`sfnt->init_face'.
* src/base/ftobjs.c (open_face): Use a pointer to FT_Stream as an
argument so that a changed stream survives.
Update callers.
If the font's `clazz->init_face' function wants to swap to new
stream, handling of whether original stream was external could
result to either memory leak or double free. Mark externality into
face flags before calling `init_face' such that the clazz can handle
external streams properly.
* src/base/ftobjs.c (FT_Open_Face): Move code to set
FT_FACE_FLAG_EXTERNAL_STREAM to...
(open_face): This function.
* src/base/ftbbox.c (BBox_Conic_Check): Remove redundant checks for
extremum at the segment ends, which are already within the bbox.
Slightly modify calculations.
The call was (from the top-level of the FreeType tree):
cppcheck --force \
--enable=all \
-I /usr/include \
-I /usr/local/include \
-I /usr/lib/gcc/i586-suse-linux/4.7/include \
-I include \
-I include/freetype \
-I include/freetype/config \
-I include/freetype/internal \
-DFT2_BUILD_LIBRARY \
. &> cppcheck.log
using cppcheck git commit f7e93f99.
Note that cppcheck still can't handle `#include FOO' (with `FOO' a
macro).
*/* Improve variable scopes.
*/* Remove redundant initializations which get overwritten.
* src/gxvalid/*: Comment out redundant code or guard it with
FT_DEBUG_LEVEL_TRACE.
Prevent division by zero by a transparent color.
* src/base/ftbitmap.c (ft_gray_for_premultiplied_srgb_bgra):
Return 0 immediately, when alpha channel is zero.
If memory allocations fail at certain points while opening a font,
FreeType can either crash due to a NULL dereference or leak memory.
* include/freetype/internal/ftobjs.c (FT_Face_InternalRec,
FT_LibraryRec): Make `refcount' a signed integer. If, for example,
FT_Open_Face() fails in a memory allocation before the face's
reference count is set to 1, a subsequent `FT_Done_Library' call
would otherwise loop over `FT_Done_Face' 2^32 times before freeing
the face.
* src/base/ftobjs.c (open_face): Initialize `stream' and friends
earlier.
(FT_Open_Face) <Fail>: Behave correctly if `node' is NULL.
(FT_Destroy_Module) <Fail>: Check that `renderer_clazz' is valid.
* include/freetype/internal/ftdebug.h: Remove pragmas.
* include/freetype/internal/ftserv.h: Use push and pop for pragmas.
* include/freetype/internal/ftvalid.h: Handle warning C4324.
* src/base/ftobjs.c: Use push and pop for pragmas.
* src/gzip/ftgzip.c: Handle warning C4244.
* src/base/ftobjs.c: Fix typo in MS pragma.
* src/base/bdflib.c (_bdf_set_default_spacing, _bdf_add_property):
`lineno' is only used in debug mode.
* src/cff/cf2ft.c (cf2_builder_moveTo): `params' is only used in
debug mode.
http://cppcheck.sourceforge.net/
Note that the current version heavily chokes on FreeType, delivering
even wrong results. I will report those issues to the cppcheck team
so that a newer version gives improved results hopefully.
*/* Improve variable scopes.
*/* Remove redundant initializations which get overwritten.
* src/base/ftmac.c ,builds/mac/ftmac.c (count_faces_scalable):
Remove unused variable.
* src/base/ftdbgmem.c (ft_mem_table_destroy): `table' can't be zero.
* src/gxvalid/gxvkern.c (gxv_kern_subtable_fmt1_entry_validate):
Remove functionless code.
* src/tools/ftrandom.c (main): Fix memory leak.
A new load flag, FT_LOAD_COLOR, makes FreeType load color
embedded-bitmaps, following this draft specification
https://color-emoji.googlecode.com/git/specification/v1.html
which defines two new SFNT tables, `CBDT' and `CBLC' (named and
modeled after `EBDT' and `EBLC', respectively). The color bitmaps
are stored in the new FT_PIXEL_MODE_BGRA format to represent BGRA
pre-multiplied sRGB images. If PNG support is available, PNG color
images as defined in the same proposed specification are supported
also.
Note that color bitmaps are converted to grayscale if client didn't
ask for color.
* builds/unix/configure.raw: Search for libpng.
Add `--without-png' option.
* devel/ftoption.h, include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_USE_PNG): New macro.
* include/freetype/freetype.h (FT_LOAD_COLOR): New load flag.
* include/freetype/ftimage.h (FT_Pixel_Mode): Add
`FT_PIXEL_MODE_BGRA'.
* include/freetype/tttags.h (TTAG_CBDT, TTAG_CBLC): New tags.
* src/base/ftbitmap.c (FT_Bitmap_Embolden): Updated.
(ft_gray_for_premultiplied_srgb_bgra): New function.
(FT_Bitmap_Convert): Handle FT_PIXEL_MODE_BGRA.
* src/sfnt/pngshim.c, src/sfnt/pngshim.h: New files.
* src/sfnt/sfnt.c: Include `pngshim.c'.
* src/sfnt/ttsbit.c: Include FT_BITMAP_H and `pngshim.h'
(tt_face_load_eblc): Load `CBLC'.
(tt_sbit_decoder_init): Load `CBDT'.
(tt_sbit_decoder_alloc_bitmap): Pass load flags to select between
color and grayscale bitmaps.
Set `num_grays'. This is used by `ftview' to choose the blending
algorithm.
(tt_sbit_decoder_load_byte_aligned,
tt_sbit_decoder_load_bit_aligned, tt_sbit_decoder_load_compound,
tt_sbit_decoder_load_image): Pass load flag.
s/write/pwrite/.
Don't call `tt_sbit_decoder_alloc_bitmap'.
Updated.
(tt_sbit_decoder_load_png) [FT_CONFIG_OPTION_USE_PNG]: New function.
(tt_sbit_decoder_load_bitmap): Pass load flag.
Handle new glyph formats 17, 18, and 19.
Call `tt_sbit_decoder_alloc_bitmap'.
Flatten color bitmaps if necessary.
(tt_face_load_sbit_image): Updated.
* src/sfnt/rules.mk (SFNT_DRV_SRC): Add `pngshim.c'.
* docs/CHANGES: Updated.
* src/base/ftcalc.c (FT_DivFix): Use unsigned values for
computations which use the left shift operator and convert to signed
as the last step.
* src/base/fttrigon.c (ft_trig_prenorm, FT_Vector_Rotate,
FT_Vector_Length, FT_Vector_Polarize): Ditto.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Simplify.
* src/cff/cffload.c (cff_subfont_load): Fix constant.
* src/cff/cffparse.c (cff_parse_integer, cff_parse_real, do_fixed,
cff_parse_fixed_dynamic): Use unsigned values for computations which
use the left shift operator and convert to signed as the last step.
* src/cid/cidload.c (cid_get_offset): Ditto.
* src/psaux/psconv.c (PS_Conv_ToFixed): Ditto.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Ditto.
* src/truetype/ttinterp.c (TT_MulFix14, TT_DotFix14): Ditto.
Use `FT2_DEBUG=bitmap:3' for tracing.
* src/base/md5.c, src/base/md5.h: New files, taken from
http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5
* include/freetype/internal/fttrace.h: Add `bitmap'.
* src/base/ftobjs.c [FT_DEBUG_LEVEL_TRACE]: Include `md5.c'
(FT_Render_Glyph_Internal) [FT_DEBUG_LEVEL_TRACE]: For tracing,
convert resulting bitmap to a uniform format and compute a checksum.
Use `bitmap' category for the tracing message.
* src/base/rules.mk (BASE_H): Updated.
* docs/LICENSE.TXT: Updated.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
The idea is to replace code like
return FT_Err_Foo_Bar;
or
return CFF_Err_Foo_Bar;
with
return FT_THROW( Foo_Bar );
The FT_THROW macro has two functions:
. It hides the module specific prefix.
. In debug mode, it calls the empty function `FT_Throw' which can
be thus used to set a breakpoint.
* include/freetype/internal/ftdebug.h (FT_THROW): New macro.
(FT_Throw): New prototype.
* src/base/ftdebug.c (FT_Throw): New function.
* src/base/ftbbox.c (BBox_Cubic_Check): New bisecting algorithm
for extremum search built around simple condition that defines
which half contains the extremum.
* include/freetype/fttrigon.h (FT_Hypot): Declare it.
* src/base/fttrigon.c (FT_Hypot): Define it.
* src/truetype/ttgload.c (TT_Process_Composite_Component): Use it
instead of explicit expressions.
* src/truetype/ttinterp.c (Current_Ratio, Normalize): Use it instead
of TT_VecLen.
(TT_VecLen): Removed.
The recent optimizations of CORDIC iterations drastically reduce
the expansion factor. The vector components with MSB of 29 are now
safe from overflow.
* src/base/fttrigon.c (FT_TRIG_SAFE_MSB): New macro.
(ft_trig_prenorm): Use it and remove dead code.
* src/base/fttrigon.c: Document the algorithm in a large comment.
(FT_TRIG_COSCALE): Remove macro.
(FT_Tan: Use `FT_TRIG_SCALE' instead.
(FT_Cos, FT_Vector_Unit): Ditto and round the return values.
After we get within 45 degrees by means of true 90-degree rotations,
we can remove initial 45-degree CORDIC iteration and start from
atan(1/2) pseudorotation, reducing expansion factor thereby.
* src/base/fttrigon.c (FT_TRIG_SCALE, FT_TRIG_COSCALE): Update macros.
(ft_trig_pseudo_rotate, ft_trig_pseudo_polarize): Update.
* src/tools/cordic.py: Bring up to date with trigonometric core.
* docs/CHANGES: Old typo.
Problem reported by Robin Watts <robin.watts@artifex.com>.
* src/base/ftoutln.c (FT_Outline_New_Internal): Ensure that
`numContours' and `numPoints' fit into FT_Outline's `n_points' and
`n_contours', respectively.
FreeType used to rely on a 24-step iteration CORDIC algorithm to
calculate trigonometric functions and rotate vectors. It turns out
that once the vector is in the right half-plane, the initial rotation
by 63 degrees is not necessary. The algorithm is perfectly capable
to converge to any angle starting from the second 45 degree rotation.
This patch removes the first rotation and makes it a 23-step CORDIC
algorithm.
* src/base/fttrigon.c (FT_TRIG_SCALE, FT_TRIG_COSCALE): Update macro
values.
(ft_trig_pseudo_rotate, ft_trig_pseudo_polarize): Remove initial
rotation.
Since the initial commit (ebe85f59) the value of FT_TRIG_SCALE has
always been slightly less than the correct value, which has been
given in the comment as a hexadecimal. As a result, vector lengths
were underestimated and rotated vectors were shortened.
* src/base/ftoutln.c (FT_Outline_EmboldenXY): Replace sequential
calls to FT_MulFix and FT_DivFix with FT_MulDiv.
Mention that bisectors are used to figure out the shift direction.
* include/freetype/fterrdef.h (FT_Err_Missing_Property): New error
code.
* include/freetype/ftmodapi.h (FT_Property_Set, FT_Property_Get):
New API.
* include/freetype/internal/services/svprop.h: New file.
* include/freetype/internal/ftserv.h (FT_SERVICE_PROPERTIES_H): New
macro.
* src/base/ftobjs.c: Include FT_SERVICE_PROPERTIES_H.
(ft_property_do, FT_Property_Set, FT_Property_Get): New functions.
Werner Lemberg