Problem reported by Titus Nemeth <tn@tntypography.eu> (by using
ttfautohint).
* src/autofit/afblue.dat: Add neutral blue zone for the tatweel
character.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
Lower the flatness threshold from upem/8 to upem/14, making the
auto-hinter accept shorter elements.
Synchronize flat/round stem selection algorithm with blue zone code.
* src/autofit/aflatin.c (FLAT_THRESHOLD): New macro.
(af_latin_metrics_init_blues): Use it.
(af_latin_hints_compute_segments): Collect information on maximum
and minimum coordinates of `on' points; use this to add a constraint
for the flat/round decision similar to
`af_latin_metrics_init_blues'.
Remove casting from `FT_Long' to `FT_Int' that might change the sign
of the return value and make it faster too.
* src/base/ftcalc.c (ft_corner_orientation): On 32-bit systems, stay
with 32-bit arithmetic when safe. Use plain math on 64-bit systems.
* src/pshinter/pshalgo.c: Remove old unused code.
* src/pfr/pfrgload.c (pfr_glyph_load_compound): Use multiplication,
not left-shift.
* src/truetype/ttgxvar.c (ft_var_load_avar, ft_var_load_gvar,
tt_face_vary_cvt, TT_Vary_Apply_Glyph_Deltas): Use multiplication,
not left-shift.
* src/base/ftrfork.c (FT_Raccess_Get_HeaderInfo): Only accept
positive values from header.
Check overflow.
* src/base/ftoutln.c (SCALED): Correctly handle left-shift of
negative values.
* src/bdf/bdf.h (_bdf_glyph_modified, _bdf_set_glyph_modified,
_bdf_clear_glyph_modified): Use unsigned long constant.
* src/bdf/bdfdrivr.c (BDF_Size_Select, BDF_Glyph_Load): Don't
left-shift values that can be negative.
* src/pcf/pcfdrivr.c (PCF_Size_Select, PCF_Glyph_Load): Don't
left-shift values that can be negative.
* src/raster/ftraster.c (SCALED): Correctly handle left-shift of
negative values.
* src/sfnt/ttsbit.c (tt_face_load_strike_metrics): Don't left-shift
values that can be negative.
* src/truetype/ttgload.c (TT_Load_Composite_Glyph,
compute_glyph_metrics, load_sbit_image): Don't left-shift values
that can be negative.
See
http://lists.nongnu.org/archive/html/freetype-devel/2015-07/msg00008.html
for a rationale.
* src/autofit/afpic.h, src/base/basepic.h, src/cff/cffpic.h,
src/pshinter/pshpic.h, src/psnames/pspic.h, src/raster/rastpic.h,
src/sfnt/sfntpic.h, src/smooth/ftspic.h, src/truetype/ttpic.h
(FT_BEGIN_HEADER, FT_END_HEADER): Move macro calls to not enclose
header files that contain FT_{BEGIN,END}_HEADER macros by
themselves.
* src/autofit/aftypes.h [FT_DEBUG_AUTOFIT]: Include
FT_CONFIG_STANDARD_LIBRARY_H earlier.
* src/truetype/ttpic.h: Include FT_INTERNL_PIC_H.
* include/freetype/internal/sfnt.h (TT_Get_Name_Func): New
prototype.
(SFNT_Interface, FT_DEFINE_SFNT_INTERFACE): New member `get_name'.
* src/sfnt/sfdriver.c (sfnt_interface): Updated.
* src/sfnt/sfobjs.c (tt_face_get_name): Tag it with `LOCAL_DEF'.
* src/sfnt/sfobjs.h: Add prototype for it.
The function uses Newton's iterations instead of dividing vector
components by its length, which needs a square root. This is,
literally, a bit less accurate but a lot faster.
* src/base/ftcalc.c (FT_Vector_NormLen): New function.
* builds/FindHarfBuzz.cmake: New file, taken from
https://trac.webkit.org/browser/trunk/Source/cmake/FindHarfBuzz.cmake
* CMakeLists.Txt: Add path to local cmake modules.
Find dependencies for zlib, bzip2, libpng, and harfbuzz.
Create `ftoption.h' file.
Set up include and linker stuff for libraries.
This change is a result of a discussion thread on freetype-devel
http://lists.nongnu.org/archive/html/freetype-devel/2015-06/msg00041.html
Re-introduce the `freetype2' subdirectory for all FreeType header
files after installation, and rename the `freetype2' subdirectory in
the git repository to `freetype'.
* include/freetype2: Renamed to...
* include/freetype: This.
* CMakeLists.txt (PUBLIC_HEADERS, PUBLIC_CONFIG_HEADERS,
PRIVATE_HEADERS): Updated.
Update creation of `ftconfig.h'.
Install generated `ftconfig.h'.
* Jamfile (HDRMACRO, RefDoc), autogen.sh: Updated.
* builds/amiga/include/config/ftconfig.h, builds/freetype.mk
(PUBLIC_DIR), builds/symbian/bld.inf, builds/toplevel.mk (work),
builds/unix/freetype2.in: Updated.
* builds/unix/freetype-config.in: Updated.
* builds/unix/configure.raw: Don't check for `rmdir'.
* builds/unix/unix-def.in (DELDIR): Use `rm -rf', which is portable
according to the autoconf info manual.
* builds/unix/install.mk (install, uninstall,
distclean_project_unix): Update and simplify.
* builds/wince/*, builds/windows/*: Updated.
* devel/ft2build.h, include/ft2build.h: Updated.
* include/freetype2/config/ftheader.h,
include/freetype2/internal/ftserv.h,
include/freetype2/internal/internal.h: Update all header file
macros.
* src/tools/chktrcmp.py (TRACE_DEF_FILES): Updated.
* docs/*: Updated.
* builds/unix/ftconfig.in, builds/vms/ftconfig.in,
include/freetype2/config/ftconfig.h,
include/freetype2/internal/ftobjs.h, src/autofit/afwarp.h: Do it.
We no longer `pollute' the namespace of possible header file names;
instead we move `ft2build.h' up by one level so that it gets
installed in the default include directory (e.g.,
/usr/local/include). After this commit, only `ft2build.h' stays in
the compiler's include path.
No visible changes for the user who follows the standard FreeType
header inclusion rules.
* include/*: Move to ...
* include/freetype2/*: This directory, except `ft2build.h'.
* CMakeLists.txt (PUBLIC_HEADERS, PUBLIC_CONFIG_HEADERS,
PRIVATE_HEADERS), Jamfile (HDRMACRO, RefDoc), autogen.sh: Updated.
* builds/amiga/include/config/ftconfig.h, builds/freetype.mk
(PUBLIC_DIR), builds/symbian/bld.inf, builds/toplevel.mk (work),
builds/unix/install.mk (install, uninstall),
builds/unix/freetype2.in: Updated.
* builds/unix/freetype-config.in: Updated.
Emit -I directory only if it is not `/usr/include'.
* builds/wince/*, builds/windows/*: Updated.
* devel/ft2build.h, include/ft2build.h: Updated.
* include/freetype2/config/ftheader.h,
include/freetype2/internal/ftserv.h,
include/freetype2/internal/internal.h: Update all header file
macros.
* src/tools/chktrcmp.py (TRACE_DEF_FILES): Updated.
* docs/*: Updated.
This is just very basic stuff and just a little bit tested on
GNU/Linux only. I won't delve into this since I'm not a Jam user.
* Jamfile: Call `HDRMACRO' for `ftserv.h' also.
(DEFINES): Replace with...
(CCFLAGS): ... this.
* src/Jamfile: Don't call `HDRMACRO' for `internal.h'; this is
already handled in the top-level Jamfile.
* src/autofit/Jamfile (DEFINES): Replace with...
(CCFLAGS): ... this.
(_sources): Add missing files.
* src/cache/Jamfile: Don't call `HDRMACRO' for `ftcache.h'; it no
longer contains macro header definitions.
* src/base/Jamfile, src/cff/Jamfile, src/sfnt/Jamfile,
src/truetype/Jamfile (_sources): Add missing files.
=======================
Tag sources with `VER-2-6'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.6.
* README, Jamfile (RefDoc), builds/windows/vc2005/freetype.vcproj,
builds/windows/vc2005/index.html,
builds/windows/vc2008/freetype.vcproj,
builds/windows/vc2008/index.html,
builds/windows/vc2010/freetype.vcxproj,
builds/windows/vc2010/index.html,
builds/windows/visualc/freetype.dsp,
builds/windows/visualc/freetype.vcproj,
builds/windows/visualc/index.html,
builds/windows/visualce/freetype.dsp,
builds/windows/visualce/freetype.vcproj,
builds/windows/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.5.5/2.6/, s/255/26/.
* include/freetype/freetype.h (FREETYPE_MINOR): Set to 6.
(FREETYPE_PATCH): Set to 0.
* builds/unix/configure.raw (version_info): Set to 18:0:12.
* CMakeLists.txt (VERSION_MINOR): Set to 0.
(VERSION_PATCH): Set to 6.
* src/autofit/afmodule.c [!FT_MAKE_OPTION_SINGLE_OBJECT]: Add
declarations for dumping functions.
* src/truetype/ttinterp.c (TT_New_Context): Pacify compiler.
* builds/toplevel.mk: Use `freetype.mk's code to compute the version
string.
Don't include a zero patch level in version string.
* builds/freetype.mk: Remove code for computing the version string.
Problem reported by Grissiom <chaos.proton@gmail.com>; in
http://lists.nongnu.org/archive/html/freetype/2015-05/msg00013.html
there is an example code to trigger the bug.
* src/truetype/ttobjs.c (tt_size_init_bytecode): Free old `size'
data before allocating again. Bug most probably introduced four
years ago in version 2.4.3.
* src/truetype/ttinterp.c: Change all existing TRACE7 calls to
TRACE6.
(opcode_name): Add string lengths.
(TT_RunIns): Implement display of code position and stack.
This is completely missing in Apple's documentation: If a `gvar'
tuple uses private point numbers (this is, deltas are specified for
some points only), the uncovered points must be interpolated for
this tuple similar to the IUP bytecode instruction. Examples that
need this functionality are glyphs `Oslash' and `Q' in Skia.ttf.
* src/truetype/ttgxvar.c (tt_delta_shift, tt_delta_interpolate,
tt_handle_deltas): New functions.
(TT_Vary_Get_Glyph_Deltas): Renamed to...
(TT_Vary_Apply_Glyph_Deltas): ... this; it directly processes the
points and does no longer return an array of deltas.
Add tracing information.
Call `tt_handle_deltas' to interpolate missing deltas.
Also fix a minor memory leak in case of error.
* src/truetype/ttgxvar.h: Updated.
* src/truetype/ttgload.c (TT_Process_Simple_Glyph,
load_truetype_glyph): Updated.
* src/truetype/ttgload.c, src/truetype/ttinterp.c: Guard new code
with `TT_CONFIG_OPTION_SUBPIXEL_HINTING'.
Problem reported by Nikolaus Waxweiler <madigens@gmail.com>.
This flag activates `native ClearType hinting', disabling backwards
compatibility mode as described in Greg Hitchcocks whitepaper. In
other words, it enables unrestricted functionality of all TrueType
instructions in ClearType.
* src/truetype/ttgload.c (tt_get_metrics): Call `sph_set_tweaks'
unconditionally.
(tt_loader_init): Unset `ignore_x_mode' flag if bit 2 of
`GS.instruct_control' is active.
* src/truetype/ttinterp.c (Ins_INSTCTRL): Handle selector index 3.
(Ins_GETINFO): Updated.
* docs/CHANGES: Document it.
* src/truetype/ttgload.c (TT_Load_Composite_Glyph): If the
ARGS_ARE_XY_VALUES flag is not set, handle argument values as
unsigned. I trust `ttx' (which has exactly such code) that it does
the right thing here...
The reason that noone has ever noticed this bug is probably the fact
that point-aligned subglyphs are rare, as are subglyphs with a
number of points in the range [128;255], which is quite large (or
even in the range [32768;65535], which is extremely unlikely).
* src/cff/cf2intrp.c (cf2_interpT2CharString): The opcodes
`vvcurveto', `hhcurveto', `vhcurveto', and `hvcurveto' all iterate,
pulling values off the stack until the stack is exhausted.
Implicitly the stack must be a multiple (or for subtly different
behaviour) a multiple plus a specific number of extra values deep.
If that's not the case, enforce it (as the old code did).
* src/cff/cf2ft.c (cf2_getSeacComponent): When using the incremental
interface to retrieve glyph data for a SEAC, it be left to the
incremental interface callback to apply the encoding to raw
character index (as it was in the previous code).
This code replaces the debugging hook from the previous commit with
a better, more generic solution.
* include/ftautoh.h: Document it.
* src/autofit/afmodule.h (AF_ModuleRec)
[AF_CONFIG_OPTION_USE_WARPER]: Add `warping' field.
* src/autofit/afmodule.c (_af_debug_disable_warper): Remove.
(af_property_set, af_property_get, af_autofitter_init)
[AF_CONFIG_OPTION_USE_WARPER]: Handle `warping' option.
* src/autofit/afhints.h (AF_HINTS_DO_WARP): Remove use of the no
longer existing `_af_debug_disable_warper'.
* src/autofit/afcjk.c (af_cjk_hints_init), src/autofit/aflatin.c
(af_latin_hints_init), src/autofit/aflatin2.c (af_latin2_hints_init)
[AF_CONFIG_OPTION_USE_WARPER]: Add `AF_SCALER_FLAG_NO_WARPER' to the
scaler flags if warping is off.
* src/autofit/aftypes.h: Updated.
* src/autofit/afmodule.c (_af_debug_disable_warper)
[FT_DEBUG_AUTOFIT]: New global variable.
* src/autofit/aftypes.h: Updated.
(AF_SCALER_FLAG_NO_WARPER): New macro (not actively used yet).
* src/autofit/afhints.h (AF_HINTS_DO_WARP): New macro.
* src/autofi/aflatin.c (af_latin_hints_apply)
[AF_CONFIG_OPTION_USE_WARPER]: Use `AF_HINTS_DO_WARP' to control use
of warper.
* src/autofit/afcjk.c (af_cjk_hints_init, af_cjk_hints_apply)
[AF_CONFIG_OPTION_USE_WARPER]: Synchronize with `aflatin.c'.
* src/autofit/aflatin2.c (af_latin2_hints_apply)
[AF_CONFIG_OPTION_USE_WARPER]: Synchronize with `aflatin.c'.
Problem reported by Behdad.
* src/cff/cffdrivr.c (cff_get_advances): Handle SFNT case
separately.
* src/cff/cffgload.c (cff_slot_load): Use advance width and side
bearing values from `hmtx' table if present.
The interface to ftgrid was broken in the series of commits starting
with
[autofit] Allocate AF_Loader on the stack instead of AF_Module.
from 2015-01-14.
* src/autofit/afmodule.c (_af_debug_hints_rec) [FT_DEBUG_AUTOFIT]:
Use a global AF_GlyphHintsRec object for debugging.
(af_autofitter_done, af_autofitter_load_glyph): Updated.
* src/autofit/afloader.c (af_loader_init, af_loader_done): Updated.
This commit allows `num_coords' to be larger or smaller than the
number of available axes while selecting a design instance, either
ignoring excess data or using defaults if data is missing.
* src/truetype/ttgxvar.c (TT_Set_MM_Blend, TT_Set_Var_Design):
Implement it.
* src/type1/t1load.c (T1_Set_MM_Blend, T1_Set_MM_Design,
T1_Set_Var_Design): Ditto.
Under normal circumstances we are usually close to the desired range
of angle values, so that the remainder is not really necessary.
* src/base/fttrigon.c (FT_Angle_Diff): Use loops instead of remainder.
* src/autofit/aftypes.h (AF_ANGLE_DIFF): Ditto in the unused macro.
* src/truetype/ttgxvar.c (ft_var_readpackedpoints): Correctly handle
single-element runs. Cf. glyph `Q' in Skia.ttf with weights larger
than the default.
Thanks to Titus Nemeth <tn@tntypography.eu> for guidance!
* src/autofit/afblue.dat: Add blue zone data for Arabic.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Arabic standard characters.
* src/autofit/afranges.c: Add Arabic data.
* src/autofit/afstyles.h: Add Arabic data.
* docs/CHANGES: Document it.
* src/truetype/ttgxvar.c (ft_var_readpackedpoints): Fix return value
of `point_cnt' if two bytes are read.
Use a more vertical coding style.
(ft_var_readpackeddeltas): Use FT_UInt for `delta_cnt' parameter.
Use a more vertical coding style.
No need for two arguments.
* include/config/ftconfig.h, builds/unix/ftconfig.in,
builds/vms/ftconfig.h (TYPEOF): Updated.
* include/internal/ftobjs.h (FT_PAD_FLOOR, FT_PIX_FLOOR),
src/autofit/afwarp.h (AF_WARPER_FLOOR): Updated.
This is the only place in FreeType where this function was used.
* include/config/ftstdlib.h (ft_labs): Remove.
* src/cache/ftcimage.c (ftc_inode_weight): Replace `ft_labs' with
`FT_ABS'.
* src/cache/ftccache.h (FTC_NodeRec): `FT_Offset' (a.k.a. `size_t')
is a better choice for `hash' to hold a pointer than `FT_PtrDist'
(a.k.a. `ptrdiff_t'), especially since the latter is signed,
causing zillions of signedness warnings. [Note that `hash' was of
type `FT_UInt32' before the change to `FT_PtrDist.]
Update all users.
* src/cache/ftcbasic.c, src/cache/ftccache.c, src/cache/ftccmap.c,
src/cache/ftcglyph.c, src/cache/ftcglyph.h: Updated.
This is hard-coded to value 2 in `fvar' version 1.0 (and no newer
version exists), but some fonts set it incorrectly.
Problem reported by Adam Twardoch <adam@fontlab.com>.
This harmonizes with other code in FreeType (and reduces the number
of necessary casts to avoid compiler warnings).
* src/autofit/afblue.hin: Make flag macros unsigned.
* src/autofit/afblue.h: Regenerated.
* src/autofit/afcjk.h: Replace flag enumeration with macros.
* src/autofit/afcjk.c: Updated.
* src/autofit/afhints.h (AF_Flags, AF_Edge_Flags): Replace with
macros.
* src/autofit/afhints.c: Updated.
* src/autofit/aflatin.h: Replace flag enumerations with macros.
* src/autofit/aflatin.c, src/autofit/aflatin2.c: Updated.
* src/autofit/aftypes.h (AF_ScalerFlags): Replace with macros.
* include/internal/t1types.h (AFM_KernPairRec): Make indices
unsigned.
Update users.
(AFM_FontInfoRec): Make element counters unsigned.
Update users.
* src/psaux/afmparse.h (AFM_ValueRec): Add union member for unsigned
int.
* src/psaux/afmparse.c (afm_parse_track_kern, afm_parse_kern_pairs):
Reject negative values for number of kerning elements.
* src/type1/t1afm.c, src/tools/test_afm.c: Updated.
Also fix other minor issues.
* src/base/ftdbgmem.c (FT_MemTableRec): Replace all FT_ULong types
with FT_Long for consistency.
(ft_mem_primes): Change type to `FT_Int'.
(ft_mem_closest_prime, ft_mem_table_set): Updated.
(ft_mem_debug_panic, ft_mem_debug_alloc, ft_mem_debug_free,
ft_mem_debug_realloc): Use `static' keyword and fix signedness
warnings where necessary.
(ft_mem_table_resize, ft_mem_table_new, ft_mem_table_destroy,
ft_mem_table_get_nodep, ft_mem_debug_init, FT_DumpMemory): Fix types
and add or remove casts to avoid signedness warnings.
This makes the code more readable and reduces compiler warnings.
* src/base/ftcalc.c (FT_MulDiv, FT_MulDiv_No_Round, FT_MulFix,
FT_DivFix): Convert input parameters to unsigned, do the
computation, then convert the result back to signed.
(ft_corner_orientation): Fix casts.
* src/truetype/ttgload.c (load_truetype_glyph): For incremental
fonts, the glyph index may be greater than the number of glyphs
indicated, so guard the check with a preprocessor conditional.
While this doesn't show up with FreeType, exactly the same code
leaks with ttfautohint's modified auto-hinter code (which gets used
in a slightly different way).
It certainly doesn't harm since it is similar to already existing
checks in the code for embedded arrays.
* src/autofit/afhints.c (af_glyph_hints_reload): Set `max_contours'
and `max_points' for all cases.
Thanks to Ben Mitchell <ben@rosettatype.com> for guidance with blue
zone characters!
* src/autofit/afblue.dat: Add blue zone data for Thai.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Thai standard characters.
* src/autofit/afranges.c: Add Thai data.
* src/autofit/afstyles.h: Add Thai data.
This fixes a breakage caused by the commit `[raster] Remove
5-level gray AA mode from monochrome rasterizer.'.
Problem reported by Markus Trippelsdorf <markus@trippelsdorf.de> and
octoploid <octoploid@yandex.com>.
* src/raster/ftraster.c (ft_black_render): Handle
`FT_RASTER_FLAG_AA'.
* src/raster/ftrend1.c (ft_raster1_render): Remove gray AA mode
remnants.
Add fallback for glyphs with degenerate bounding boxes.
If a glyph has only one very narrow feature, the bbox can end up
with either the width or height of the bbox being 0, in which case
no raster memory is allocated and no attempt is made to render the
glyph. This is less than ideal when the drop-out compensation in
the rendering code would actually result in the glyph being
rendered.
This problem can be observed with the `I' glyph (gid 47) in the
Autodesk RomanS TrueType font.
* src/raster/ftrend1.c (ft_raster1_render): Add a fallback if either
dimension is zero to explicitly round up/down (instead of simply
round).
We are now following the GNU guidelines: A new release automatically
means that the copyright year of all affected files gets updated; it
is no longer used to track years of modification changes.
* src/tools/update-copyright-year: New Perl script.
* src/tools/update-copyright: New shell script that calls
`update-copyright-year' on all files.
* src/tools/no-copyright: Exceptions that should not be handled by
`update-copyright'
Avoids multiple mallocs per typical glyphs.
With this and recent changes to avoid mallocs, the thread-safe
stack-based loader is now as fast as the previous model that had one
cached singleton.
* src/autofit/afhints.h (AF_SEGMENTS_EMBEDDED, AF_EDGES_EMBEDDED):
New macros.
(AF_AxisHintsRec): Add two arrays for segments and edges.
* src/autofit/afhints.c (af_axis_hints_new_segment): Only allocate
data if number of segments exceeds given threshold value.
(af_axis_hints_new_edge): Only allocate data if number of edges
exceeds given threshold value.
(af_glyph_hints_done): Updated.
This avoids at least two malloc calls for typical glyphs.
* src/autofit/afhints.h (AF_POINTS_EMBEDDED, AF_CONTOURS_EMBEDDED):
New macros.
(AF_GlyphHintsRec): Add two arrays for contours and points.
* src/autofit/afhints.c (af_glyph_hints_init, af_glyph_hints_done):
Updated.
(af_glyph_hints_reload): Only allocate data if number of contours or
points exceeds given threshold values.
This avoids one malloc per load.
* src/autofit/afloader.h (AF_LoaderRec): Change type of `hints' to
`AF_GlyphHints'.
Update prototype.
* src/autofit/afloader.c (af_loader_init): Use `AF_GlyphHints'
parameter instead of `FT_Memory'.
(af_loader_done): Directly reset `load_hints'.
(af_loader_load_g): Updated.
* src/autofit/afmodule.c (af_autofitter_load_glyph): Use local
`hints' object.
No need to create a new glyph loader; we can reuse the one from
`slot->internal->loader'. It's hard to tell why it was written that
way originally, but new code looks sound and correct to me, and
avoids lots of allocations.
* src/autofit/afloader.c (af_loader_init): Change return type to
`void'.
Don't call `FT_GlyphLoader_New'.
(af_loader_reset): Don't call `FT_GlyphLoader_Rewind'.
(af_loader_load_g): Update code to use `internal->loader', which
doesn't need copying of data.
* src/autofit/afloader.h (AF_LoaderRec): Remove `gloader' member.
Update prototype.
* src/autofit/afmodule.c (af_autofitter_load_glyph): Updated.
We never have to deal with composite glyphs in the autohinter, as
those will be loaded into FORMAT_OUTLINE by the recursed
`FT_Load_Glyph' function.
In the rare cases that FT_LOAD_NO_RECURSE is set, it will imply
FT_LOAD_NO_SCALE as per `FT_Load_Glyph', which then implies
FT_LOAD_NO_HINTING:
/* resolve load flags dependencies */
if ( load_flags & FT_LOAD_NO_RECURSE )
load_flags |= FT_LOAD_NO_SCALE |
FT_LOAD_IGNORE_TRANSFORM;
if ( load_flags & FT_LOAD_NO_SCALE )
{
load_flags |= FT_LOAD_NO_HINTING |
FT_LOAD_NO_BITMAP;
load_flags &= ~FT_LOAD_RENDER;
}
and as such the auto-hinter is never called. Thus, the recursion in
`af_loader_load_g' never actually happens. So remove the depth
counter as well.
* src/autofit/afloader.c (af_loader_load_g): Remove `depth'
parameter.
<FT_GLYPH_FORMAT_COMPOSITE>: Remove associated code.
(af_loader_load_glyph): Updated.
Apparently `ras.cProfile' might be uninitialized. This will be the
case if `ras.top == ras.cProfile->offset', as can be seen in
`End_Profile'. The overshoot code introduced in a change `Fix B/W
rasterization of subglyphs with different drop-out modes.' (from
2009-06-18) violated this, accessing `ras.cProfile->flags'
unconditionally just before calling `End_Profile' (which then
detected that `cProfile' is uninitialized and didn't touch it).
This was harmless, and was not detected by valgrind before because
the objects were allocated on the `raster_pool', which was always
initialized. With recent change to allocate raster buffers on the
stack, valgrind now reported this invalid access.
* src/raster/ftraster.c (Convert_Glyph): Don't access an
uninitialized `cProfile'.
Looks like `ras.span_y' could always be used without initialization.
This was never detected by valgrind before because the library-wide
`raster_pool' was used for the worker object and `raster_pool' was
originally zero'ed. But subsequent reuses of it were using `span_y'
uninitialized. With the recent change to not use `render_pool' and
allocate worker and buffer on the stack, valgrind now detects this
uninitialized access.
* src/smooth/ftgrays.c (gray_raster_render): Initialize
`ras.span_y'.
It's unused after the following commits:
[raster] Allocate render pool for mono rasterizer on the stack.
[raster] Remove 5-level gray AA mode from monochrome rasterizer.
The value of FT_RENDER_POOL_SIZE still serves the purpose it used to
serve, which is, to adjust the pool size. But the pool is now
allocated on the stack on demand.
* src/base/ftobjs.c (FT_New_Library, FT_Done_Library): Implement.
Instead of keeping `library->renderers' in a MRU order, just leave
it as-is. The MRU machinery wasn't thread-safe.
With this patch, rasterizing glyphs from different faces from
different threads doesn't fail choosing rasterizer
(FT_Err_Cannot_Render_Glyph).
Easiest to see that crash was to add a `printf' (or otherwise let
thread yield in FT_Throw with debugging enabled).
* src/base/ftobjs.c (FT_Render_Glyph_Internal), src/base/ftoutln.c
(FT_Outline_Render): Don't call `FT_Set_Renderer'.
Instead of using the `render_pool' member of `FT_Library' that is
provided down to the rasterizer, completely ignore that and allocate
needed objects on the stack instead.
With this patch, rasterizing glyphs from different faces from
different threads doesn't crash in the monochrome rasterizer.
* src/raster/ftraster.c (black_TRaster): Remove `buffer',
`buffer_size', and `worker' members.
(ft_black_render): Create `buffer' locally.
(ft_black_reset): Updated.
It was off by default and couldn't be turned on at runtime. And the
smooth rasterizer superceded it over ten years ago. No point in
keeping. Comments suggested that it was there for compatibility
with FreeType 1.
550 lines down.
* src/raster/ftraster.c (FT_RASTER_OPTION_ANTI_ALIASING,
RASTER_GRAY_LINES): Remove macros and all associated code.
(black_TWorker): Remove `gray_min_x' and `gray_max_x'.
(black_TRaster): Remove `grays' and `gray_width'.
(Vertical_Sweep_Init, Vertical_Sweep_Span, Vertical_Sweep_Drop,
ft_black_render): Updated.
* src/raster/ftrend1.c (ft_raster1_render): Simplify code.
(ft_raster5_renderer_class): Removed.
Previously the code had stipulation for using a per-TT_Size exec
context if `size->debug' was true. But there was no way that
`size->debug' could *ever* be true. As such, the code was always
using the singleton `TT_ExecContext' that was stored in `TT_Driver'.
This was, clearly, not threadsafe.
With this patch, loading glyphs from different faces from different
threads doesn't crash in the bytecode loader code.
* src/truetype/ttobjs.h (TT_SizeRec): Remove `debug' member.
(TT_DriverRec): Remove `context' member.
* src/truetype/ttobjs.c (tt_size_run_fpgm, tt_size_run_prep): Remove
`TT_ExecContext' code related to a global `TT_Driver' object.
(tt_driver_done): Don't remove `TT_ExecContext' object here but ...
(tt_size_done_bytecode): ... here.
(tt_driver_init): Don't create `TT_ExecContext' object here but ...
(tt_size_init_bytecode): ... here, only on demand.
* src/truetype/ttinterp.c (TT_Run_Context): Remove defunct debug
code.
(TT_New_Context): Remove `TT_ExecContext' code related to a global
`TT_Driver' object.
* src/truetype/ttinterp.h: Updated.
* src/truetype/ttgload.c (TT_Hint_Glyph, tt_loader_init): Updated.
Stop sharing a global `AF_Loader'. Allocate one on the stack during
glyph load.
Right now this results in about 25% slowdown, to be fixed in a
following commit.
With this patch loading glyphs from different faces from different
threads doesn't immediately crash in the autohinting loader code.
Bugs:
https://bugzilla.redhat.com/show_bug.cgi?id=1164941
* src/autofit/afloader.c (af_loader_init): Pass
`AF_Loader' and `FT_Memory' instead of `AF_Module' as arguments.
(af_loader_reset, af_loader_load_glyph): Also pass `loader' as
argument.
(af_loader_done): Use `AF_Loader' instead of `AF_Module' as
argument.
* src/autofit/afmodule.c (af_autofitter_init): Don't call
`af_loader_init'.
(af_autofitter_done): Don't call `af_loader_done'.
(af_autofitter_load_glyph): Use a local `AF_Loader' object.
* src/autofit/afloader.h: Include `afmodule.h'.
Update prototypes.
Move typedef for `AF_Module' to...
* src/autofit/afmodule.h: ... this place.
No longer include `afloader.h'.
Assure that FreeType's internal include directories are found before
`CPPFLAGS' (which might be set by the user in the environment), and
`CPPFLAGS' before `CFLAGS'.
* builds/freetype.mk (FT_CFLAGS): Don't add `INCLUDE_FLAGS'.
(FT_COMPILE): Make this a special variable for compiling only the
files handled in `freetype.mk'.
(.c.$O): Removed, unused.
* src/*/rules.mk (*_COMPILE): Fix order of include directories.
Based on a patch from Behdad.
* src/truetype/ttinterp.c (DO_*): Expand macros into corresponding
`Ins_*' functions.
(TT_RunIns): Replace `DO_*' macros with `Ins_*' function calls.
(ARRAY_BOUND_ERROR): Remove second definition, which is no longer
needed.
(Ins_SVTCA, Ins_SPVTCA, Ins_SFVTCA): Replaced with...
(Ins_SxyTCA): New function.
This is a follow-up patch.
* src/truetype/ttinterp.c, src/truetype/ttinterp.h
[TT_CONFIG_OPTION_STATIC_INTERPRETER,
TT_CONFIG_OPTION_STATIC_RASTER]: Remove macros and related code.
Apparently, BSD tar isn't capable yet of handling POSIX-1.2001
(contrary to GNU tar), so force the POSIX-1.1988 format.
Problem reported by Stephen Fisher <sfisher@SDF.ORG>.
Some prototypes in ftvalid.h use `valid' for the variables
typed as FT_Validator. Their implementations in src/base/
ftobjs.c and utilizations in src/sfnt/ttcmap.c do similar.
Some macros in otvcommn.h assume the exist of the variable
`valid' typed as OTV_Validator in the caller.
Mixing these two conventions cause invalid pointer conversion
and unexpected SEGV in longjmp. To prevent it, all variables
typed as OTV_Validator are renamed to `otvalid'.
* src/otvalid/otvcommn.h: Replace `valid' by `otvalid'.
* src/otvalid/{otvcommn.c, otvbase.c, otvgdef.c, otvgpos.c,
otvgsub.c, otvjstf.c, otvmath.c}: Replace `valid' by `otvalid'
if it is typed as OTV_Validator.
Work around `features' of X11's `pcfWriteFont' and `pcfReadFont'
functions. Since the PCF format doesn't have an official
specification, we have to exactly follow these functions' behaviour.
The problem was unveiled with a patch from 2014-11-06, fixing issue #43547.
* src/pcf/pcfread.c (pcf_read_TOC): Don't check table size for last
element. Instead, assign real size.
Werner Lemberg