This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
started with `StartData' in CID-keyed Type 1 fonts.
* include/freetype/internal/t1types.h (CID_FaceRec): Add new
members `binary_data' and `cid_stream'.
* src/cid/cidload.c (cid_read_subrs): Use `face->cid_stream'.
(cid_hex_to_binary): New auxiliary function.
(cid_face_open): Add new argument `face_index' to return quickly
if less than zero. Updated all callers.
Call `cid_hex_to_binary', then open and assign memory stream to
`face->cid_stream' if `parser->binary_length' is non-zero.
* src/cid/cidload.h: Updated.
* src/cid/cidobjs.c (cid_face_done): Free `binary_data' and
`cid_stream'.
* src/cid/cidparse.c (cid_parser_new): Check arguments to
`StartData' and set parser->binary_length accordingly.
* src/cid/cidparse.h (CID_Parser): New member `binary_length'.
* src/cid/cidgload.c (cid_load_glyph): Use `face->cid_stream'.
* docs/CHANGES: Updated.
include/freetype/config/ftstdlib.h (ft_atoi): Replaced with...
(ft_atol): This.
* src/base/ftdbgmem.c: s/atol/ft_atol/.
* src/type42/t42drivr.c: s/ft_atoi/ft_atol/.
FTC_FaceID.
* src/cff/cffdrivr.c (cff_get_cmap_info): Call sfnt module's TT CMap
Info service function if the cmap comes from sfnt. Return 0 if the
cmap is sythesized in cff module.
Formatting; updating copyright.
correctly. This doesn't slow down the loading of PS fonts
significantly since charstrings aren't affected.
* include/freetype/config/ftstdlib.h (ft_xdigit): Renamed to...
(ft_isxdigit): This. Updated all callers.
(ft_isdigit): New alias to `isdigit'.
* include/freetype/internal/psaux.h (PS_Parser_FuncsRec): Renamed
`skip_alpha' to `skip_PS_token'.
Add parameter to `to_bytes' and change some argument types.
* src/psaux/psauxmod.c (ps_parser_funcs): Updated.
* src/psaux/psobjs.c (ft_char_table): New array to map character
codes (ASCII and EBCDIC) of digits to numbers.
(OP): New auxiliary macro holding either `>=' or `<' depending on
the character encoding.
(skip_comment): New function.
(skip_spaces): Use it.
(skip_alpha): Removed.
(skip_literal_string, skip_string): New functions.
(ps_parser_skip_PS_token): New function. This is a better
replacement of...
(ps_parser_skip_alpha): Removed.
(ps_parser_to_token, ps+parser_to_token_array): Updated.
(T1Radix): Rewritten, using `ft_char_table'.
(t1_toint): Renamed to...
(ps_toint): This. Update all callers.
Use `ft_char_table'.
(ps_tobytes): Add parameter to handle delimiters and change some
argument types.
Use `ft_char_table'.
(t1_tofixed): Renamed to...
(ps_tofixed): This. Update all callers.
Use `ft_char_table'.
(t1_tocoordarray): Renamed and updated to...
(ps_tocoordarray): This. Update all callers.
(t1_tofixedarray): Renamed and updated to...
(ps_tofixedarray): This. Update all callers.
(t1_tobool): Renamed to...
(ps_tobool): This. Update all callers.
(ps_parser_load_field): Updated.
(ps_parser_load_field_table): Use `T1_MAX_TABLE_ELEMENTS'
everywhere.
(ps_parser_to_int, ps_parser_to_fixed, ps_parser_to_coord_array,
ps_parser_to_fixed_array): Skip spaces. Updated.
(ps_parser_to_bytes): Add parameter to handle delimiters and change
some argument types. Updated.
* src/psaux/psobjs.h: Updated.
* src/cid/cidload.c (cid_parse_dict): Updated.
* src/cid/cidparse.c (cid_parser_new): Check whether the `StartData'
token was really found.
* src/cid/cidparse.h (cid_parser_skip_alpha): Updated and renamed
to...
(cid_parser_skip_PS_token): This.
* src/type1/t1parse.h (T1_ParserRec): Use `FT_Bool' for boolean
fields.
(T1_Skip_Alpha): Replaced with...
(T1_Skip_PS_Token): This new macro.
* src/type1/t1parse.c (hexa_value): Removed.
(T1_Get_Private_Dict): Use `ft_isxdigit' and
`psaux->ps_parser_funcs_to_bytes' for handling ASCII hexadecimal
encoding.
After decrypting, replace the four random bytes at the beginning
with whitespace.
* src/type1/t1load.c (t1_allocate_blend): Use proper error values.
(parser_blend_design_positions, parse_blend_design_map,
parse_weight_vector): Updated.
(is_space): Handle `\f' also.
(is_name_char): Removed.
(read_binary_data): Updated.
(parse_encoding): Use `ft_isdigit'.
Updated.
(parse_subrs): Updated.
(TABLE_EXTEND): New macro.
(parse_charstrings): Updated.
Provide a workaround for buggy fonts which have more entries in the
/CharStrings dictionary then expected; the function now adds some
slots and skips entries which still exceed the new limit.
(parse_dict): Updated.
Terminate on the token `closefile'.
* src/type42/t42parse.c (T1_Skip_Alpha): Replaced with...
(T1_Skip_PS_Token): This new macro. Updated all callers.
(t42_parse_encoding): Use `ft_isdigit'.
* src/base/ftmm.c (ft_face_get_mm_service): Return FT_Err_OK if
success.
want to list them all here. The operations performed were all logical
transformations of the sources:
- trying to convert all enums and constants to CAPITALIZED_STYLE, with
#define definitions like
#define my_old_constants MY_NEW_CONSTANT
- big, big update of the documentation comments
* include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c,
include/freetype/ftimage.h: adding support for LCD-optimized rendering
though the new constants/enums:
FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V
FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V
this is still work in progress, don't expect everything to work correctly
though most of the features have been implemented.
* adding new FT_LOAD_XXX flags, used to specify both hinting and rendering
targets:
FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering
FT_LOAD_TARGET_MONO :: monochrome bitmaps
FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering
FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering
note that FT_LOAD_TARGET_NORMAL is 0, which means that the default
behaviour of the font engine is _unchanged_.
warn about the GNU Make requirement at compile time..
* include/freetype/config/ftstdlib.h,
include/freetype/config/ftconfig.h,
include/freetype/config/ftheader.h,
include/freetype/internal/ftmemory.h,
include/freetype/internal/ftobjs.h,
src/autohint/ahoptim.c,
src/base/ftdbgmem.c, src/base/ftdebug.c,
src/base/ftmac.c, src/base/ftobjs.c,
src/base/ftsystem.c,
src/cache/ftcimage.c, src/cache/ftcsbits.c,
src/cff/cffdriver.c, src/cff/cffload.c, src/cff/cffobjs.c,
src/cid/cidload.c, src/cid/cidparse.c, src/cid/cidriver.c,
src/pcf/pcfdriver.c, src/pcf/pcfread.c,
src/psaux/t1cmap.c, src/psaux/t1decode.c,
src/pshinter/pshalgo1.c, src/pshinter/pshalgo2.c,
src/pshinter/pshrec.c,
src/psnames/psmodule.c,
src/raster/ftraster.c,
src/sfnt/sfdriver.c, src/sfnt/ttload.c, src/sfnt/ttpost.c,
src/smooth/ftgrays.c,
src/type1/t1afm.c, src/type1/t1driver.c, src/type1/t1gload.c,
src/type1/t1load.c, src/type1/t1objs.c, src/type1/t1parse.c:
added the new configuration file "ftstdlib.h" used to define
aliases for all ISO C library functions used by the engine
(e.g. strlen, qsort, setjmp, etc...)
this eases the porting of FreeType 2 to exotic environments like
XFree86 modules/extensions..
also removed many #include <string.h>, #include <stdlib.h>, etc...
from the engine's sources where they're not needed..
changed the names of memory macros. Examples:
MEM_Set => FT_MEM_SET
MEM_Copy => FT_MEM_COPY
MEM_Move => FT_MEM_MOVE
ALLOC => FT_ALLOC
FREE => FT_FREE
REALLOC = >FT_REALLOC
FT_NEW was introduced to allocate a new object from a _typed_
pointer..
note that ALLOC_ARRAY and REALLOC_ARRAY have been replaced
by FT_NEW_ARRAY and FT_RENEW_ARRAY which take _typed_ pointer
arguments.
This results in _lots_ of sources being changed, but makes the
code more generic and less error-prone..
details.
* include/freetype/internal/cfferrs.h,
include/freetype/internal/tterrors.h,
include/freetype/internal/t1errors.h: Removed. Replaced with files
local to the module. All extra error codes have been moved to
`fterrors.h'.
* src/sfnt/ttpost.h: Move error codes to `fterrors.h'.
* src/autohint/aherrors.h, src/cache/ftcerror.h, src/cff/cfferrs.h,
src/cid/ciderrs.h, src/pcf/pcferror.h, src/psaux/psauxerr.h,
src/psnames/psnamerr.h, src/raster/rasterrs.h, src/sfnt/sferrors.h,
src/smooth/ftsmerrs.h, src/truetype/tterrors.h,
src/type1/t1errors.h, src/winfonts/fnterrs.h: New files defining the
error names for the module it belongs to.
* include/freetype/ftmoderr.h: New file, defining the module error
offsets. Its structure is similar to `fterrors.h'.
* include/freetype/fterrors.h (FT_NOERRORDEF): New macro.
(FT_ERRORDEF): Redefined to use module error offsets.
All internal error codes are now public; unused error codes have
been removed, some are new.
* include/freetype/config/ftheader.h (FT_MODULE_ERRORS_H): New
macro.
* include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_USE_MODULE_ERRORS): New macro.
All other source files have been updated to use the new error codes;
some already existing (internal) error codes local to a module have
been renamed to give them the same name as in the base module.
All make files have been updated to include the local error files.
* src/cid/cidtokens.h: Replaced with...
* src/cid/cidtoken.h: This file for 8+3 consistency.
* src/raster/ftraster.c: Use macros for header file names.
* include/freetype/config/ftheader.h: removed obsolete macros like
FT_SOURCE_FILE, etc.. and added cache-specific macro definitions that
were previously defined in <freetype/ftcache.h>. Added comments to be
included in a new API Reference section.
* src/*/*: removed the use of FT_SOURCE_FILE, etc.. now, each component
needs to added its own directory to the include path at compile time.
Modified all "rules.mk" and "descrip.mms" accordingly..
include/freetype/internal/internal.h: fixed header inclusion macros
to use direct definitions. This is the only way to do these things
in a portable way :-( The rest of the code should follow shortly
though everything compiles now..
* builds/compiler/intelc.mk, builds/compiler/watcom.mk,
builds/win32/detect.mk: added support for the Intel C/C++ compiler,
as well as _preliminary_ (read: doesn't work !!) support for Watcom.
Also added a new setup target. Type "make setup list" for a list
of supported command-line compilers on Win32..
Removed. ANSI C doesn't (explicitly) allow macro expansion in
arguments using `##'.
(FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE): Use directory
names directly. Make them configurable. Use `##' to strip leading
and trailing spaces from arguments.
* builds/unix/ft2unix.h: Adapted.
* src/base/ftsystem.c (ft_alloc, ft_realloc, ft_free, ft_io_stream,
ft_close_stream): Use FT_CALLBACK_DEF.
* builds/unix/ftsystem.c: Use new header scheme.
(FT_Done_Memory): Use free() from FT_Memory structure.
* src/base/ftinit.c, src/base/ftmac.c: Header scheme fixes.
* include/freetype/config/ft2build.h (FT2_CONFIG_ROOT,
FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE,
FT_SOURCE_FILE): Use `##' operator to be really ANSI C compliant.
C++ programs easier:
Renamed FT_WordXX to FT_UIntXX.
Changed a lot of void* to FT_Byte* if related to i/o streams -- FreeType
always accesses streams byte-wise, so this makes sense IMHO.
Added a lot of #ifdef __cplusplus to header files (and removed a few).
Other minor syntax fixes (mostly casts).
Replaced the variable `private' with `private_dict' -- `private' is
reserved in C++.
- using FT_UNUSED instead of UNUSED
- using FT_LONG64 and FT_INT64 instead of LONG64 & INT64
- using FT_SIZEOF_INT & FT_SIZEOF_LONG instead of...
- removed the #ifdefs that used SIZEOF_INT, instead we now
use FT_Int32 and FT_UInt32 when needed to support
32-bits quantity correctly on 64-bits systems..
Werner Lemberg