This compiler doesn't recognize the end-of-comment sequence `*/' if
it immediately follows non-ASCII characters.
* src/autofit/afscript.h: Ensure whitespace before `*/'.
Suggested by Alexei. `UL' is only needed for 16bit compilers, but
it seems noone is using this anymore (and we no longer test whether
FreeType compiles in such an environment). Otherwise, it is easy to
add the postfix to the `AF_UNICODE_RANGE' macro.
* src/autofit/afblue.dat: Add blue zone data for Armenian.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Armenian standard characters.
* src/autofit/afranges.c: Add Armenian data.
* src/autofit/afstyles.h: Add Armenian data.
This essentially moves the Gurmukhi script from the `Indic' hinter to
the `Latin' hinter.
* src/autofit/afblue.dat: Add blue zone data for Gurmukhi.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Gurmukhi standard characters and move
data out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Gurmukhi data out of
AF_CONFIG_OPTION_INDIC block.
* src/autofit/afstyles.h: Update Gurmukhi data; in particular, use
AF_WRITING_SYSTEM_LATIN.
This essentially moves the Gujarati script from the `Indic' hinter to
the `Latin' hinter.
* src/autofit/afblue.dat: Add blue zone data for Gujarati.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Gujarati standard characters and move
data out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Gujarati data out of
AF_CONFIG_OPTION_INDIC block.
* src/autofit/afstyles.h: Update Gujarati data; in particular, use
AF_WRITING_SYSTEM_LATIN.
Georgian is problematic, since `uppercase' forms of Mkhedruli
(called Mtavruli) are not yet defined in Unicode, which means that
proper blue zones can't be defined. However, there is already a
proposal submitted to Unicode; see
http://www.unicode.org/L2/L2016/16034-n4707-georgian.pdf
Additionally, due to historical reasons, Unicode treats Khutsuri as
the same script as Mkhedruli, and so does OpenType. However, since
the two scripts have completely different shapes it can happen that
blue zones differ considerably. The tag `geok' used here (derived
from ISO 15924) to differentiate the two scripts is not an OpenType
tag in use. If we now have a font that contains both glyphs for
Mkhedruli and Khutsuri, and it uses OpenType features for both also,
HarfBuzz unavoidably treats all glyphs as `geor'. As a consequence,
blue zones for `geok' are not used for glyphs involved in the
OpenType features.
An issue not yet resolved is which OpenType feature should be used
to access Mtavruli glyph shapes; right now, FreeType doesn't set up
support for them, but it is easy to add them later on as soon as
more information is available.
* src/autofit/afblue.dat: Add blue zone data for Georgian.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Georgian standard characters.
* src/autofit/afranges.c: Add Georgian data.
* src/autofit/afstyles.h: Add Georgian data.
Even if the dummy hinter is used as the handler for `none' (which
doesn't use blue zones), it is more consistent than the old value
(which was 0), pointing to Arabic...
* src/autofit/afblue.dat: Add `AF_BLUE_STRINGSET_NONE'.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afstyles.h (none_dflt): Use AF_BLUE_STRINGSET_NONE.
* src/autofit/aflatin.c (af_latin_compute_stem_width): Add argument
to pass difference between hinted and unhinted position of base
point; use this to adjust the stem width depending on the PPEM so
that it doesn't become too large under certain circumstances.
Update all callers using value 0 for this argument except...
(af_latin_align_linked_edge): Pass position delta of base point to
`af_latin_compute_stem_width'.
This essentially moves the Sinhala script from the `Indic' hinter to
the `Latin' hinter.
* src/autofit/afblue.dat: Add blue zone data for Sinhala.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Sinhala standard character and move data
out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Sinhala data out of
AF_CONFIG_OPTION_INDIC block.
* src/autofit/afstyles.h: Update Sinhala data; in particular, use
AF_WRITING_SYSTEM_LATIN.
An example that gets better rendered is glyph `uusignTaml' (glyph
index 2286) in font `FreeSerif.ttf' (Version 0412.2263) at 22ppem.
* src/autofit/aflatin.c (af_latin_hints_compute_segments): Properly
handle segments where the last point of the first segment is
identical to the first point in the second one. This can happen for
malformed fonts or spikes. We either merge the new segment with the
previous one (both segments point into the same direction), or we
discard the shorter segment if they point into different directions.
* src/autofit/aflatin.c (af_latin_hints_compute_segments): Change
some local variable names to better differentiate between values
along a segment and values orthogonal to it.
In complex glyph shapes, the original logic was too simple to cater
for situations that would actually need something similar to PS Hint
masks. This fix should alleviate the worst cases.
* src/autofit/aflatin.c (af_latin_hint_edges): Don't allow
complete disappearance of stems.
This essentially moves the Tamil script from the `Indic' hinter to
the `Latin' hinter.
* src/autofit/afblue.dat: Add blue zone data for Tamil.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Tamli standard character and move data
out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Tamil data out of
AF_CONFIG_OPTION_INDIC block.
* src/autofit/afstyles.h: Update Tamil data; in particular, use
AF_WRITING_SYSTEM_LATIN.
This essentially moves the Malayalam script from the `Indic' hinter
to the `Latin' hinter.
* src/autofit/afblue.dat: Add blue zone data for Malayalam.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Malayalam standard characters and move
data out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Malayalam data out of
AF_CONFIG_OPTION_INDIC block.
* src/autofit/afstyles.h: Update Malayalam data; in particular, use
AF_WRITING_SYSTEM_LATIN.
This essentially moves the Kannada script from the `Indic' hinter to
the `Latin' hinter.
* src/autofit/afblue.dat: Add blue zone data for Kannada.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Kannada standard characters and move
data out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Kannada data out of
AF_CONFIG_OPTION_INDIC block.
* src/autofit/afstyles.h: Update Kannada data; in particular, use
AF_WRITING_SYSTEM_LATIN.
Patch taken from ttfautohint, commit
071ae2c00e0d67f9d19418f4fade1c23d27dc185.
There were two bugs.
- We now use non-standard script tags like `khms' for special
purposes. However, HarfBuzz maps such tags to `DFLT', and
without this commit the associated lookups were incorrectly
assigned to the non-standard tags.
- Let's assume we have a Bengali font, and the font's `DFLT'
script tag handles the necessary lookups for Bengali, too.
Without this commit, the `DFLT' lookups were assigned to
ttfautohint's default script (usually `latn') before the
standard lookups for Bengali were handled.
We now have the following order while searching for covered
glyph indices.
special features of scripts (e.g. `sups' for Cyrillic)
Unicode mappings of scripts
remaining features of scripts (especially important for Indic
scripts)
default features of default script
* src/autofit/afshaper.c, src/autofit/afshaper.h
(af_shaper_get_coverage): Add boolean parameter to indicate default
script.
Update all callers.
* src/autofit/afglobal.c (af_face_globals_compute_style_coverage):
Fix search order for coverages.
This improves rendering of scripts like Bengali or Devanagari.
* src/autofit/afhints.c (af_axis_hints_new_edge): Add parameter to
pass top-to-bottom hinting flag. This makes the function sort edges
in descending vertical position.
* src/autofit/afhints.c: Updated.
* src/autofit/aflatin.c (af_latin_hints_compute_edges,
af_latin_hint_edges): Use `top_to_bottom_hinting' flag.
* src/autofit/afcjk.c (af_cjk_hints_compute_edges),
src/autofit/aflatin2.c (af_latin2_hints_compute_edges): Updated.
Right now, it does nothing.
* src/autofit/afscript.h: Add another parameter to `SCRIPT',
specifying hinting direction.
* src/autofit/afglobal.c, scr/autofit/afglobal.h,
src/autofit/afpic.c, src/autofit/afranges.h, src/autofit/afshaper.c,
src/autofit/aftypes.h: Extend `SCRIPT' definitions.
This essentially moves the Bengali script from the `Indic' hinter to
the `Latin' hinter.
* src/autofit/afblue.dat: Add blue zone data for Bengali.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Bengali standard characters and move
data out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Bengali data out of
AF_CONFIG_OPTION_INDIC block.
* src/autofit/afstyles.h: Update Bengali data; in particular, use
AF_WRITING_SYSTEM_LATIN.
This was removed while rewriting the HarfBuzz interface.
* src/autofit/afglobal.h (AF_FaceGlobalsRec): Add `hb_buf' field to
hold internal HarfBuzz buffer, needed for feature comparison.
* src/autofit/afglobal.c (af_face_globals_new,
af_face_globals_free): Initialize and destroy `hb_buf'.
* src/autofit/afshaper.c (af_shaper_get_cluster): Compare character
(cluster) with and without applied feature.
* src/autofit/aflatin.c (af_latin_metrics_init_blues): Fix tracing
message.
This feature is mainly for Khmer: The idea is to avoid a clash
between the top of subscript glyphs and the bottom of normal
baseline glyphs.
This only works for character clusters mapped to multiple glyphs.
* src/autofit/afblue.dat: Add subscript top blue zone for Khmer.
* src/autofit/afblue.hin (AF_BLUE_PROPERTY_LATIN_SUB_TOP): New
macro.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/aflatin.h (AF_LATIN_IS_SUB_TOP_BLUE,
AF_LATIN_BLUE_SUB_TOP): New macros.
* src/autofit/aflatin.c (af_latin_metrics_init_blues): Handle new
blue zone property.
Update tracing messages.
(af_latin_metrics_scale_dim): Handle new blue zone property.
(af_latin_hints_compute_blue_edges): Updated.
We split Khmer into two auto-hinter scripts: `Khmer' (`khmr') and
`Khmer symbols' (`khms', U+19E0-U+19FF).
* src/autofit/afblue.dat: Add blue zone data for Khmer.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Khmer standard characters.
* src/autofit/afranges.c: Add Khmer data.
* src/autofit/afstyles.h: Add Khmer data.
Scripts like Khmer have blue zones that can't be directly
represented by Unicode characters. Instead, it is necessary to let
HarfBuzz convert character clusters into proper glyph representation
forms, then deriving the blue zone information from the resulting
glyphs.
* src/autofit/hbshim.c, src/autofit/hbshim.h: Replaced by...
* src/autofit/afshaper.c, src/autofit/afshaper.h: ... these two new
files, providing a new API to access HarfBuzz.
The new API manages a HarfBuzz buffer with `af_shaper_buf_create'
and `af_shaper_buf_destroy'. The buffer receives a UTF8 encoded
string with function `af_shaper_get_cluster', and the resulting
glyph data (indices, advance widths, vertical offsets) can be
iteratively accessed with function `af_shaper_get_elem'.
* src/autofit/afcjk.c (af_cjk_metrics_init_widths,
af_cjk_metrics_init_blues, af_cjk_metrics_check_digits): Updated.
* src/autofit/aflatin.c (af_latin_metrics_init_widths,
af_latin_metrics_init_blues, af_latin_metrics_check_digits):
Updated.
* include/freetype/internal/fttrace.h: s/afharfbuzz/afshaper/.
* src/autofit/afglobal.c: s/hbshim.h/afshaper.h/.
(af_face_globals_compute_style_coverage): Updated.
* src/autofit/afglocal.h: s/hbshim.h/afshaper.h/.
* src/autofit/autofit.c: s/hbshim.c/afshaper.c/.
* src/autofit/Jamfile, src/autofit/rules.mk (AUTOF_DRV_SRC):
Updated.
This is more flexible; additionally, it would allow character
clusters.
* src/autofit/aftypes.h (SCRIPT, AF_DEFINE_SCRIPT_CLASS): Updated.
(AF_ScriptClassRec): Replace `standard_char[123]' with
`standard_charstring'.
* src/autofit/afscript.h: Replace last three character arguments
of the `SCRIPT' calls with a string parameter, holding the standard
characters (in UTF-8 encoding) separated with spaces.
* src/autofit/afglobal.c, src/autofit/afglobal.h,
src/autofit/afpic.c, src/autofit/afranges.c, src/autofit/hbshim.c
(SCRIPT): Updated.
* src/autofit/afcjk.c (af_cjk_metrics_init_widths),
src/autofit/aflatin.c (af_latin_metrics_init_widths): Updated.
* src/autofit/aflatin.h (AF_LatinBlueRec): Add `ascender' and
`descender' fields.
* src/autofit/aflatin.c (af_latin_metrics_init_blues): Collect
ascender and descender data for blue zones.
(af_latin_metrics_scale_dim): Reject vertical scaling values that
change the result by more than two pixels.
This is a crude adaption of the original `cf2_computeDarkening'
function.
* src/autofit/afloader.c (af_intToFixed, af_fixedToInt,
af_floatToFixed): New macros, taken from `cf2fixed.h'.
(af_loader_compute_darkening): New function.
* src/autofit/afloader.h: Updated.
We need the computed standard horizontal and vertical widths for the
emboldening calculation. This method provides a convenient way to
extract it from writing-system-specific metrics structures, which
all script definitions must implement.
* src/autofit/aftypes.h (AF_WritingSystem_GetStdWidthsFunc): New
function type.
(AF_WritingSystemClassRec): New member `style_metrics_getstdw'.
(AF_DEFINE_WRITING_SYSTEM_CLASS): Updated.
* src/autofit/afcjk.c (af_cjk_get_standard_width): New function.
(af_cjk_writing_system_class): Updated.
* src/autofit/afdummy.c (af_dummy_writing_system_class): Updated.
* src/autofit/afindic.c (af_cjk_get_standard_width): New function.
(af_indic_writing_system_class): Updated.
* src/autofit/aflatin.c (af_latin_get_standard_width): New function.
(af_indic_writing_system_class): Updated.
* src/autofit/aflatin.c (af_latin_get_standard_width): New function.
(af_indic_writing_system_class): Updated.
Actual code follows in a later commit.
* include/freetype/ftautoh.h: Document `no-stem-darkening' and
`darkening-parameters'.
* src/autofit/afmodule.h: New fields `no_stem_darkening' and
`darken_params'.
* src/autofit/afmodule.c (af_property_set, af_property_get):
Handle them.
(af_autofitter_init): Initialize them.
* src/autofit/afhints.c (af_print_idx, af_get_segment_index,
af_get_edge_index): New functions.
(af_glyph_hints_dump_points): Remove unnecessary `|', `[', and `]'.
Add segment and edge index for each point.
Slightly change printing order of some elements.
Don't print `-1' but `--' for missing elements.
(af_glyph_hints_dump_segments, af_glyph_hints_dump_edges): Remove
unnecessary `|', `[', and `]'.
Don't print `-1' but `--' for missing elements.
=========================
Tag sources with `VER-2-6-1'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.6.1.
* README, Jamfile (RefDoc), builds/windows/vc2005/freetype.vcproj,
builds/windows/vc2005/index.html,
builds/windows/vc2008/freetype.vcproj,
builds/windows/vc2008/index.html,
builds/windows/vc2010/freetype.vcxproj,
builds/windows/vc2010/index.html,
builds/windows/visualc/freetype.dsp,
builds/windows/visualc/freetype.vcproj,
builds/windows/visualc/index.html,
builds/windows/visualce/freetype.dsp,
builds/windows/visualce/freetype.vcproj,
builds/windows/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.6/2.6.1/, s/26/261/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 1.
* builds/unix/configure.raw (version_info): Set to 18:1:12.
* CMakeLists.txt (VERSION_PATCH): Set to 1.
* src/autofit/afmodule.c [AF_DEBUG_AUTOFIT]: Ensure C linking for
dumping functions.
Thanks to Danh Hong <danhhong@gmail.com> for guidance with blue zone
characters!
* src/autofit/afblue.dat: Add blue zone data for Lao.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Lao standard characters.
* src/autofit/afranges.c: Add Lao data.
* src/autofit/afstyles.h: Add Lao data.
This commit adds two fallback scripts (`latb', `latp') and
implements support for the no-base character ranges introduced in
the previous commit.
* src/autofit/aftypes.h (AF_ScriptClassRec): Add
`script_uni_nobase_ranges' field.
(AF_DEFINE_SCRIPT_CLASS): Updated.
* src/autofit/afscript.h, src/autofit/afstyles.h: Add `latb' and
`latp' fallback scripts.
* src/autofit/afblue.dat: Add blue zones for Latin subscript and
superscript fallback scripts.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afglobal.h (AF_NOBASE): New style flag for no-base
characters.
(AF_STYLE_MASK): Updated.
* src/autofit/afglobal.c (SCRIPT): Updated.
(af_face_globals_compute_style_coverage): Handle new style flag.
* src/autofit/aflatin.c (af_latin_hints_apply): Handle new style
flag.
* src/autofit/afranges.h (SCRIPT): Use it to export no-base ranges.
This patch introduces auxiliary code ranges that identify no-base
characters; they refer to glyphs of a script that should be hinted
without alignments to blue zones (mostly diacritics).
It also splits off ranges for fallback scripts that handle subscript
and superscript characters not covered by OpenType features. For
example, this greatly helps improve the hinting of various phonetic
alphabets, which contain a large amount characters that look like
superscript glyphs.
Finally, code ranges are updated to Unicode 8.0, and enclosed
characters are removed in general since they normally look better if
they stay unhinted.
* src/autofit/afranges.c (af_latn_uniranges): Updated to Unicode
8.0.
Split off superscript-like and subscript-like glyphs into...
(af_latb_uniranges, af_latp_uniranges): ... these two new arrays.
(af_xxxx_nobase_uniranges): New arrays that hold no-base characters
of the corresponding character ranges.
* src/autofit/afglobal.h (AF_STYLE_MASK): New macro.
(AF_STYLE_UNASSIGNED): Use AF_STYLE_MASK for definition.
* src/autofit/afglobal.c (af_face_globals_compute_style_coverage):
Updated.
* include/freetype/ftautoh.h (FT_Prop_GlyphToScriptMap): Use
`FT_UShort' for `map' field.
* src/autofit/afglobal.c (af_face_globals_compute_style_coverage,
af_face_globals_new), src/autofit/hbshim.c, src/autofit/hbshim.h
(af_get_coverage): Use FT_UShort for `glyph_styles' array.
* src/autofit/afglobal.h (AF_STYLE_UNASSIGNED, AF_DIGIT): Extend to
16 bits.
(AF_FaceGlobalsRec): Use `FT_UShort' for `glyph_styles' field.
Problem reported by Titus Nemeth <tn@tntypography.eu> (by using
ttfautohint).
* src/autofit/afblue.dat: Add neutral blue zone for the tatweel
character.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
Lower the flatness threshold from upem/8 to upem/14, making the
auto-hinter accept shorter elements.
Synchronize flat/round stem selection algorithm with blue zone code.
* src/autofit/aflatin.c (FLAT_THRESHOLD): New macro.
(af_latin_metrics_init_blues): Use it.
(af_latin_hints_compute_segments): Collect information on maximum
and minimum coordinates of `on' points; use this to add a constraint
for the flat/round decision similar to
`af_latin_metrics_init_blues'.
See
http://lists.nongnu.org/archive/html/freetype-devel/2015-07/msg00008.html
for a rationale.
* src/autofit/afpic.h, src/base/basepic.h, src/cff/cffpic.h,
src/pshinter/pshpic.h, src/psnames/pspic.h, src/raster/rastpic.h,
src/sfnt/sfntpic.h, src/smooth/ftspic.h, src/truetype/ttpic.h
(FT_BEGIN_HEADER, FT_END_HEADER): Move macro calls to not enclose
header files that contain FT_{BEGIN,END}_HEADER macros by
themselves.
* src/autofit/aftypes.h [FT_DEBUG_AUTOFIT]: Include
FT_CONFIG_STANDARD_LIBRARY_H earlier.
* src/truetype/ttpic.h: Include FT_INTERNL_PIC_H.
* builds/unix/ftconfig.in, builds/vms/ftconfig.in,
include/freetype2/config/ftconfig.h,
include/freetype2/internal/ftobjs.h, src/autofit/afwarp.h: Do it.
This is just very basic stuff and just a little bit tested on
GNU/Linux only. I won't delve into this since I'm not a Jam user.
* Jamfile: Call `HDRMACRO' for `ftserv.h' also.
(DEFINES): Replace with...
(CCFLAGS): ... this.
* src/Jamfile: Don't call `HDRMACRO' for `internal.h'; this is
already handled in the top-level Jamfile.
* src/autofit/Jamfile (DEFINES): Replace with...
(CCFLAGS): ... this.
(_sources): Add missing files.
* src/cache/Jamfile: Don't call `HDRMACRO' for `ftcache.h'; it no
longer contains macro header definitions.
* src/base/Jamfile, src/cff/Jamfile, src/sfnt/Jamfile,
src/truetype/Jamfile (_sources): Add missing files.
=======================
Tag sources with `VER-2-6'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.6.
* README, Jamfile (RefDoc), builds/windows/vc2005/freetype.vcproj,
builds/windows/vc2005/index.html,
builds/windows/vc2008/freetype.vcproj,
builds/windows/vc2008/index.html,
builds/windows/vc2010/freetype.vcxproj,
builds/windows/vc2010/index.html,
builds/windows/visualc/freetype.dsp,
builds/windows/visualc/freetype.vcproj,
builds/windows/visualc/index.html,
builds/windows/visualce/freetype.dsp,
builds/windows/visualce/freetype.vcproj,
builds/windows/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.5.5/2.6/, s/255/26/.
* include/freetype/freetype.h (FREETYPE_MINOR): Set to 6.
(FREETYPE_PATCH): Set to 0.
* builds/unix/configure.raw (version_info): Set to 18:0:12.
* CMakeLists.txt (VERSION_MINOR): Set to 0.
(VERSION_PATCH): Set to 6.
* src/autofit/afmodule.c [!FT_MAKE_OPTION_SINGLE_OBJECT]: Add
declarations for dumping functions.
* src/truetype/ttinterp.c (TT_New_Context): Pacify compiler.
* builds/toplevel.mk: Use `freetype.mk's code to compute the version
string.
Don't include a zero patch level in version string.
* builds/freetype.mk: Remove code for computing the version string.
This code replaces the debugging hook from the previous commit with
a better, more generic solution.
* include/ftautoh.h: Document it.
* src/autofit/afmodule.h (AF_ModuleRec)
[AF_CONFIG_OPTION_USE_WARPER]: Add `warping' field.
* src/autofit/afmodule.c (_af_debug_disable_warper): Remove.
(af_property_set, af_property_get, af_autofitter_init)
[AF_CONFIG_OPTION_USE_WARPER]: Handle `warping' option.
* src/autofit/afhints.h (AF_HINTS_DO_WARP): Remove use of the no
longer existing `_af_debug_disable_warper'.
* src/autofit/afcjk.c (af_cjk_hints_init), src/autofit/aflatin.c
(af_latin_hints_init), src/autofit/aflatin2.c (af_latin2_hints_init)
[AF_CONFIG_OPTION_USE_WARPER]: Add `AF_SCALER_FLAG_NO_WARPER' to the
scaler flags if warping is off.
* src/autofit/aftypes.h: Updated.
* src/autofit/afmodule.c (_af_debug_disable_warper)
[FT_DEBUG_AUTOFIT]: New global variable.
* src/autofit/aftypes.h: Updated.
(AF_SCALER_FLAG_NO_WARPER): New macro (not actively used yet).
* src/autofit/afhints.h (AF_HINTS_DO_WARP): New macro.
* src/autofi/aflatin.c (af_latin_hints_apply)
[AF_CONFIG_OPTION_USE_WARPER]: Use `AF_HINTS_DO_WARP' to control use
of warper.
* src/autofit/afcjk.c (af_cjk_hints_init, af_cjk_hints_apply)
[AF_CONFIG_OPTION_USE_WARPER]: Synchronize with `aflatin.c'.
* src/autofit/aflatin2.c (af_latin2_hints_apply)
[AF_CONFIG_OPTION_USE_WARPER]: Synchronize with `aflatin.c'.
The interface to ftgrid was broken in the series of commits starting
with
[autofit] Allocate AF_Loader on the stack instead of AF_Module.
from 2015-01-14.
* src/autofit/afmodule.c (_af_debug_hints_rec) [FT_DEBUG_AUTOFIT]:
Use a global AF_GlyphHintsRec object for debugging.
(af_autofitter_done, af_autofitter_load_glyph): Updated.
* src/autofit/afloader.c (af_loader_init, af_loader_done): Updated.
Under normal circumstances we are usually close to the desired range
of angle values, so that the remainder is not really necessary.
* src/base/fttrigon.c (FT_Angle_Diff): Use loops instead of remainder.
* src/autofit/aftypes.h (AF_ANGLE_DIFF): Ditto in the unused macro.
Thanks to Titus Nemeth <tn@tntypography.eu> for guidance!
* src/autofit/afblue.dat: Add blue zone data for Arabic.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Arabic standard characters.
* src/autofit/afranges.c: Add Arabic data.
* src/autofit/afstyles.h: Add Arabic data.
* docs/CHANGES: Document it.
No need for two arguments.
* include/config/ftconfig.h, builds/unix/ftconfig.in,
builds/vms/ftconfig.h (TYPEOF): Updated.
* include/internal/ftobjs.h (FT_PAD_FLOOR, FT_PIX_FLOOR),
src/autofit/afwarp.h (AF_WARPER_FLOOR): Updated.
This harmonizes with other code in FreeType (and reduces the number
of necessary casts to avoid compiler warnings).
* src/autofit/afblue.hin: Make flag macros unsigned.
* src/autofit/afblue.h: Regenerated.
* src/autofit/afcjk.h: Replace flag enumeration with macros.
* src/autofit/afcjk.c: Updated.
* src/autofit/afhints.h (AF_Flags, AF_Edge_Flags): Replace with
macros.
* src/autofit/afhints.c: Updated.
* src/autofit/aflatin.h: Replace flag enumerations with macros.
* src/autofit/aflatin.c, src/autofit/aflatin2.c: Updated.
* src/autofit/aftypes.h (AF_ScalerFlags): Replace with macros.
While this doesn't show up with FreeType, exactly the same code
leaks with ttfautohint's modified auto-hinter code (which gets used
in a slightly different way).
It certainly doesn't harm since it is similar to already existing
checks in the code for embedded arrays.
* src/autofit/afhints.c (af_glyph_hints_reload): Set `max_contours'
and `max_points' for all cases.
Thanks to Ben Mitchell <ben@rosettatype.com> for guidance with blue
zone characters!
* src/autofit/afblue.dat: Add blue zone data for Thai.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Thai standard characters.
* src/autofit/afranges.c: Add Thai data.
* src/autofit/afstyles.h: Add Thai data.
Avoids multiple mallocs per typical glyphs.
With this and recent changes to avoid mallocs, the thread-safe
stack-based loader is now as fast as the previous model that had one
cached singleton.
* src/autofit/afhints.h (AF_SEGMENTS_EMBEDDED, AF_EDGES_EMBEDDED):
New macros.
(AF_AxisHintsRec): Add two arrays for segments and edges.
* src/autofit/afhints.c (af_axis_hints_new_segment): Only allocate
data if number of segments exceeds given threshold value.
(af_axis_hints_new_edge): Only allocate data if number of edges
exceeds given threshold value.
(af_glyph_hints_done): Updated.
This avoids at least two malloc calls for typical glyphs.
* src/autofit/afhints.h (AF_POINTS_EMBEDDED, AF_CONTOURS_EMBEDDED):
New macros.
(AF_GlyphHintsRec): Add two arrays for contours and points.
* src/autofit/afhints.c (af_glyph_hints_init, af_glyph_hints_done):
Updated.
(af_glyph_hints_reload): Only allocate data if number of contours or
points exceeds given threshold values.
This avoids one malloc per load.
* src/autofit/afloader.h (AF_LoaderRec): Change type of `hints' to
`AF_GlyphHints'.
Update prototype.
* src/autofit/afloader.c (af_loader_init): Use `AF_GlyphHints'
parameter instead of `FT_Memory'.
(af_loader_done): Directly reset `load_hints'.
(af_loader_load_g): Updated.
* src/autofit/afmodule.c (af_autofitter_load_glyph): Use local
`hints' object.
No need to create a new glyph loader; we can reuse the one from
`slot->internal->loader'. It's hard to tell why it was written that
way originally, but new code looks sound and correct to me, and
avoids lots of allocations.
* src/autofit/afloader.c (af_loader_init): Change return type to
`void'.
Don't call `FT_GlyphLoader_New'.
(af_loader_reset): Don't call `FT_GlyphLoader_Rewind'.
(af_loader_load_g): Update code to use `internal->loader', which
doesn't need copying of data.
* src/autofit/afloader.h (AF_LoaderRec): Remove `gloader' member.
Update prototype.
* src/autofit/afmodule.c (af_autofitter_load_glyph): Updated.
We never have to deal with composite glyphs in the autohinter, as
those will be loaded into FORMAT_OUTLINE by the recursed
`FT_Load_Glyph' function.
In the rare cases that FT_LOAD_NO_RECURSE is set, it will imply
FT_LOAD_NO_SCALE as per `FT_Load_Glyph', which then implies
FT_LOAD_NO_HINTING:
/* resolve load flags dependencies */
if ( load_flags & FT_LOAD_NO_RECURSE )
load_flags |= FT_LOAD_NO_SCALE |
FT_LOAD_IGNORE_TRANSFORM;
if ( load_flags & FT_LOAD_NO_SCALE )
{
load_flags |= FT_LOAD_NO_HINTING |
FT_LOAD_NO_BITMAP;
load_flags &= ~FT_LOAD_RENDER;
}
and as such the auto-hinter is never called. Thus, the recursion in
`af_loader_load_g' never actually happens. So remove the depth
counter as well.
* src/autofit/afloader.c (af_loader_load_g): Remove `depth'
parameter.
<FT_GLYPH_FORMAT_COMPOSITE>: Remove associated code.
(af_loader_load_glyph): Updated.
Stop sharing a global `AF_Loader'. Allocate one on the stack during
glyph load.
Right now this results in about 25% slowdown, to be fixed in a
following commit.
With this patch loading glyphs from different faces from different
threads doesn't immediately crash in the autohinting loader code.
Bugs:
https://bugzilla.redhat.com/show_bug.cgi?id=1164941
* src/autofit/afloader.c (af_loader_init): Pass
`AF_Loader' and `FT_Memory' instead of `AF_Module' as arguments.
(af_loader_reset, af_loader_load_glyph): Also pass `loader' as
argument.
(af_loader_done): Use `AF_Loader' instead of `AF_Module' as
argument.
* src/autofit/afmodule.c (af_autofitter_init): Don't call
`af_loader_init'.
(af_autofitter_done): Don't call `af_loader_done'.
(af_autofitter_load_glyph): Use a local `AF_Loader' object.
* src/autofit/afloader.h: Include `afmodule.h'.
Update prototypes.
Move typedef for `AF_Module' to...
* src/autofit/afmodule.h: ... this place.
No longer include `afloader.h'.
Assure that FreeType's internal include directories are found before
`CPPFLAGS' (which might be set by the user in the environment), and
`CPPFLAGS' before `CFLAGS'.
* builds/freetype.mk (FT_CFLAGS): Don't add `INCLUDE_FLAGS'.
(FT_COMPILE): Make this a special variable for compiling only the
files handled in `freetype.mk'.
(.c.$O): Removed, unused.
* src/*/rules.mk (*_COMPILE): Fix order of include directories.
Using `%ld' for pointer differences causes warnings on 32bit
platforms. The correct type would be (the relatively new) `%td',
however, this is missing on some important platforms.
This patch improves the change from 2014-11-28.
* src/autofit/afhints.c (AF_INDEX_NUM): Use `int' typecast. Our
pointer differences are always sufficiently small.
(af_glyph_hints_dump_points, af_glyph_hints_dump_segments,
af_glyph_hints_dump_edge): Revert to `%d' and use `AF_INDEX_NUM'.
The functions in this patch *do* return non-trivial errors that must
be taken care of.
* src/autofit/afloader.c (af_loader_load_g), src/base/ftobjs.c
(FT_Render_Glyph_Internal), src/base/ftoutln.c (FT_Outline_Render),
src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_endchar>,
src/psaux/psobjs.c (ps_parser_load_field_table), src/psaux/t1decode
(t1_decoder_parse_charstrings) <op_endchar>, src/truetype/ttgload.c
(load_truetype_glyph <subglyph loop>, tt_loader_init,
TT_Load_Glyph), src/truetype/ttgxvar.c (TT_Set_MM_Blend),
src/truetype/ttobjs.c (tt_size_run_fpgm, tt_size_run_prep): Do it.
This essentially moves the Telugu script from the `Indic' hinter to
the `Latin' hinter.
Note that this is a first shot and quite certainly needs
refinements.
* src/autofit/afblue.dat: Add blue zone data for Telugu.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Telugu standard characters and move
data out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Telugu data out of
AF_CONFIG_OPTION_INDIC block.
* src/autofit/afstyles.h: Update Telugu data; in particular, use
AF_WRITING_SYSTEM_LATIN.
Problem reported by Ralf S. Engelschall <rse@engelschall.com>.
* src/autofit/afhints.c (af_glyph_hints_reload): Fix threshold for
finding first non-near point.
Properly initialize non-near point deltas.
This essentially moves the Devanagari script from the `Indic' hinter
to the `Latin' hinter. Thanks to Girish Dalvi
<girish.dalvi@gmail.com> for guidance with blue zone characters!
* src/autofit/afblue.dat: Add blue zone data for Devanagari.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Devanagari standard characters and
move data out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Devanagari data out of
AF_CONFIG_OPTION_INDIC block.
Move U+20B9, (new) Rupee sign, from Latin to Devanagari.
* src/autofit/afstyles.h: Update Devanagari data; in particular, use
AF_WRITING_SYSTEM_LATIN.
* src/autofit/afhints.h (AF_Edge_Flags): New value
`AF_EDGE_NEUTRAL'.
* src/autofit/aflatin.c (af_latin_hints_compute_blue_edges): Trace
neutral blue zones with AF_EDGE_NEUTRAL.
(af_latin_hint_edges): Skip neutral blue zones if necessary.
Such blue zones match either the top or the bottom of a contour. We
need them for scripts where accent-like elements directly touch the
base character (for example, some vowel signs in Devanagari, cf.
U+0913 or U+0914).
* src/autofit/afblue.hin (AF_BLUE_PROPERTY_LATIN_NEUTRAL): New
property.
* src/autofit/afblue.h: Regenerated.
* src/autofit/aflatin.h (AF_LATIN_IS_NEUTRAL_BLUE): New macro.
(AF_LATIN_BLUE_NEUTRAL): New enumeration value.
* src/autofit/aflatin.c (af_latin_metrics_init_blues,
af_latin_hints_compute_blue_edges): Handle neutral blue zones.