Previously, the loading of a glyph was traced at level 4, if at all.
With this change, all font loading routines emit a tracing message
at level 1, making it easier to select tracing output (for example
using F2_DEBUG="any:1 afhints:7 aflatin:7").
* src/bdf/bdfdrivr.c (BDF_Glyph_Load): Add tracing message.
* src/cff/cffdrivr.c (cff_glyph_load): Ditto.
* src/cff/cffgload.c (cff_decoder_prepare): Improve tracing
messages.
* src/cid/cidgload.c (cid_load_glyph): Use level 1 for tracing
message.
* src/pcf/pcfdrivr.c (PCF_Glyph_Load): Ditto.
* src/pfr/pfrobjs.c (pfr_slot_load): Add tracing message.
* src/truetype/ttgload.c (TT_Load_Glyph): Ditto.
* src/type1/t1gload.c (T1_Load_Glyph): Ditto.
* src/type42/t42objs.c (T42_GlyphSlot_Load): Ditto.
* src/winfonts/winfnt.c (FNT_Load_Glyph): Ditto.
* src/truetype/ttgload.c (TT_Load_Glyph): Use the glyph's (scaled)
`linearHoriAdvance' if the sbit's `horiAdvance' value is zero.
Cf. font `Fixedsys Excelsior' v3.01 (FSEX300.ttf), glyph A, 16ppem.
This makes the option TT_CONFIG_OPTION_SUBPIXEL_HINTING controllable
at runtime.
* src/truetype/ttdriver.c: Include FT_TRUETYPE_DRIVER_H.
(tt_property_set, tt_property_get): Fill templates.
* src/truetype/ttobjs.h (TT_DriverRec): Add `interpreter_version'
member.
Remove unused `extension_component' member.
* src/truetype/ttgload.c: Include FT_TRUETYPE_DRIVER_H.
(tt_get_metrics, TT_Hint_Glyph, TT_Process_Simple_Glyph,
compute_glyph_metrics, tt_loader_init): Use `interpreter_version'.
* src/truetype/ttinterp.c: Include FT_TRUETYPE_DRIVER_H.
(SUBPIXEL_HINTING): New macro to check `interpreter_version' flag.
Update all affected functions to use it.
Use TT_INTERPRETER_VERSION_XXX where appropriate.
* src/truetype/ttobjs.c: Include FT_TRUETYPE_DRIVER_H.
(tt_driver_init): Initialize `interpreter_version'.
* src/truetype/ttsubpix.c: Include FT_TRUETYPE_DRIVER_H.
Use TT_INTERPRETER_VERSION_XXX where appropriate.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
* src/truetype/ttsubpix.h: Updated.
(SPH_X_SCALING_RULES_SIZE): Moved and renamed to...
* src/truetype/ttsubpix.c (X_SCALING_RULES_SIZE): This.
(sph_X_SCALING_Rules): Removed.
(scale_test_tweak): Make function static.
(sph_test_tweak_x_scaling): New function.
* src/truetype/ttgload.c (TT_Process_Simple_Glyph): Updated.
* include/freetype/fttrigon.h (FT_Hypot): Declare it.
* src/base/fttrigon.c (FT_Hypot): Define it.
* src/truetype/ttgload.c (TT_Process_Composite_Component): Use it
instead of explicit expressions.
* src/truetype/ttinterp.c (Current_Ratio, Normalize): Use it instead
of TT_VecLen.
(TT_VecLen): Removed.
This patches fixes many issues with the ttsubpix implementation.
1. Data tables are defined, instead of declared, in the header, and
thus copied into each source file that includes it.
2. These tables were defined as global, mutable, visible variables,
and thus costing private RAM to every process that loads the
library (> 50 KB / process, this is huge!).
Additionally, this also made the library export the symbols
completely needlessly.
3. Missing `sph_' and `SPH_' prefixes to some of the definitions.
Note that this doesn't try to fix the incredibly inefficient storage
format for the data tables used by the code. This one will require
another pass in the future.
* src/truetype/ttinterp.h (MAX_NAME_SIZE, MAX_CLASS_MEMBERS):
Renamed to...
(SPH_MAX_NAME_SIZE, SPH_MAX_CLASS_MEMBERS): This.
Update all users.
(SPH_TweakRule, SPH_ScaleRule): Decorate with `const' where
appropriate.
(Font_Class): Rename to...
(SPH_Font_Class): This. Decorate with `const' where appropriate.
* src/truetype/ttsubpix.h (scale_test_tweak, sph_test_tweak):
Decorate arguments with `const' where appropriate.
Move font tweaking tables to...
* src/truetype/ttsubpic.c: This file and decorate them with `static'
and `const' where appropriate.
(X_SCALING_Rules, X_SCALING_RULES_SIZE): Renamed to...
(spu_X_SCALING_Rules, SPH_X_SCALING_RULES_SIZE): This.
Update all users.
* include/freetype/internal/ftcalc.h (FT_MulDiv_No_Round): Don't
enclose with `TT_USE_BYTECODE_INTERPRETER'; we now need the function
elsewhere also.
* src/autofit/afcjk.h: Use AF_CONFIG_OPTION_CJK.
* src/truetype/ttgload.c (tt_loader_init): Fix compiler warning.
* src/truetype/ttinterp.c (Ins_MSIRP): Fix compiler warning.
* src/truetype/ttinterp.h: Use
TT_CONFIG_OPTION_BYTECODE_INTERPRETER.
This is the large, famous `Infinality' patch to support ClearType
bytecode which has been available from
http://www.infinality.net/blog/ for some time, and which has been
refined over the last years. While still experimental, it is now
mature enough to be included directly into FreeType.
Most of the code is based on the ClearType whitepaper written by
Greg Hitchcock
http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx
which gives a detailed overview of the necessary changes to the
Microsoft rasterizer so that older fonts are supported. However, a
lot of details are still missing, and this patches provides a
framework to easily handle rendering issues down to the glyph level
of certain fonts.
Note that ClearType support is not completely implemented! In
particular, full support for the options `compatible_widths',
`symmetrical_smoothing, and `bgr' (via the GETINFO bytecode
instruction) is missing.
* src/truetype/ttsubpix.c: New file, providing code to handle
`tweaks', this is, rules for certain glyphs in certain fonts
(including wildcards) which need a special treatment.
* src/truetype/ttsubpix.h: New file, holding the tweaking rules.
* include/freetype/config/ftoption.h, src/devel/ftoption.h
(TT_CONFIG_OPTION_SUBPIXEL_HINTING): New macro.
* include/freetype/internal/ftobjs.h (FT_PIX_FLOOR_GRID,
FT_PIX_ROUND_GRID, FT_PIX_CEIL_GRID): New macros.
* src/truetype/truetype.c [TT_USE_BYTECODE_INTERPRETER]: Include
`ttsubpix.c'.
* src/truetype/ttgload.c: Include `ttsubpix.h'.
[All changes below are guarded by TT_CONFIG_OPTION_SUBPIXEL_HINTING.]
(tt_get_metrics): Set tweak flags.
(TT_Hint_Glyph): Call `FT_Outline_EmboldenXY' if necessary.
(TT_Process_Simple_Glyph): Compensate emboldening if necessary.
(compute_glyph_metrics): Handle `compatible widths' option.
(tt_loader_init): Handle ClearType GETINFO information bits.
* src/truetype/rules.mk (TT_DRC_SRC): Updated.
* src/truetype/ttinterp.c: Include `ttsubpix.h'.
[Where necessary, changes below are guarded by
TT_CONFIG_OPTION_SUBPIXEL_HINTING.]
(Direct_Move, Direct_Move_X): Extended.
(Round_None, Round_To_Grid, Round_To_Half_Grid, Round_Down_To_Grid,
Round_Up_To_Grid, Round_To_Double_Grid, Round_Super, Round_Super_45,
SetSuperRound): Add parameter to handle the number of grid lines per
pixel.
(SET_SuperRound, ROUND_None, CUR_Func_round): Updated.
(DO_SROUND, DOS45ROUND, DO_ODD, DO_EVEN): Updated.
(DO_ROUND, DO_NROUND): Updated.
(DO_RS): Take care of `Typeman' bytecode patterns.
(Ins_FDEF): Add some debugging code. Commented out.
(Ins_ENDF): Restore state.
(Ins_CALL, Ins_LOOPCALL): Handle inline delta functions.
(Ins_MD): Handle `Vacuform' rounds.
(Move_Zp2_Point, Ins_SHPIX, Ins_MSIRP, Ins_MDAP, Ins_MIAP,
Ins_MDRP, Ins_MIRP): Handle tweaks.
(Ins_ALIGNRP): Add tweak guard.
(Ins_IUP, Ins_DELTAP): Handle tweaks.
(Ins_GETINFO): Handle new ClearType bits.
(TT_RunIns): Handle tweaks.
* src/truetype/ttinterp.h: Updated.
(SPH_TweakRule, SPH_ScaleRule): New structures for tweaks.
(TT_ExecContextRec): Add members for subpixel hinting support.
* src/truetype/ttobjs.h (TT_DefRecord): Add `inline_delta' member.
This makes FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH redundant,
deprecated, and ignored. The new behavior is what every major user
of FreeType has been requesting. Global advance is broken in many
CJK fonts. Just ignoring it by default makes most sense.
* src/truetype/ttdriver.c (tt_get_advances),
src/truetype/ttgload.c (TT_Get_HMetrics, TT_Get_VMetrics,
tt_get_metrics, compute_glyph_metrics, TT_Load_Glyph),
src/truetype/ttgload.h: Implement it.
* docs/CHANGES: Updated.
Acroread does the same.
* src/truetype/ttgload.c (TT_Process_Composite_Glyph): Call
`Update_Max' to adjust size of instructions array if necessary and
add a rough safety check.
(load_truetype_glyph): Save `loader->byte_len' before recursive
call.
* src/truetype/ttinterp.h, src/truetype/ttinterp.c (Update_Max):
Declare it as FT_LOCAL.
Initialize phantom points before calling the incremental interface
to update glyph metrics.
* src/truetype/ttgload.c (tt_get_metrics_incr_overrides)
[FT_CONFIG_OPTION_INCREMENTAL]: New function, split off from...
(tt_get_metrics): This.
Updated.
(load_truetype_glyph): Use tt_get_metrics_incr_overrides.
After long discussion, we now consider the character width vector
(wx,wy) returned by the `sbw' Type 1 operator as being part of *one*
direction only. For example, if you are using the horizontal
writing direction, you get the horizontal and vertical components of
the advance width for this direction. Note that OpenType and CFF fonts
don't have such a vertical component; instead, the GPOS table can be
used to generate two-dimensional advance widths (but this isn't
handled by FreeType).
* include/freetype/ftincrem.h (FT_Incremental_MetricsRec): Add
`advance_v' field to hold the vertical component of the advance
value.
* src/truetype/ttgload.c (tt_get_metrics), src/cff/cffgload.c
(cff_slot_load), src/type1/t1gload.c
(T1_Parse_Glyph_And_Get_Char_String), src/cid/cidgload.c
(cid_load_glyph): Use it.
Reported by Jeremy Manson <jeremy.manson@gmail.com>.
src/truetype/ttgload.c (load_truetype_glyph): Add parameter to
quickly load the glyph header only.
Update all callers.
(tt_loader_init): Add parameter to quickly load the `glyf' table
only.
Update all callers.
(TT_Load_Glyph): Compute linear advance values for embedded bitmap
glyphs too.
The calculation of `vertBearingX' is not defined in the OTF font
spec so FreeType does a `best effort' attempt. However, this value
is defined in the PDF and PostScript specs, and that algorithm is
better than the one FreeType currently uses:
FreeType: Use the middle of the bounding box as the X coordinate
of the vertical origin.
Adobe PDF spec: Use the middle of the horizontal advance vector as
the X coordinate of the vertical origin.
FreeType's algorithm goes wrong if you have a really small glyph
(like the full-width, circle-like dot at the end of the sentence, as
used in CJK scripts) with large bearings. With the FreeType
algorithm this dot gets centered on the baseline; with the PDF
algorithm it gets the correct location (in the top right). Note
that this is a serious issue, it's like printing the dot at the end
of a Roman sentence at the center of the textline instead of on the
baseline like it should. So i believe the PDF spec's algorithm
should be used in FreeType as well.
The `vertBearingY' value for such small glyphs is also very strange
if no `vmtx' information is present, since the height of the bbox is
not representable for the height of the glyph visually (the
whitespace up to the baseline is part of the glyph). The fix also
includes some code for a better estimate of `vertBearingY'.
* src/base/ftobjs.c (ft_synthesize_vertical_metrics): `vertBearingX'
is now calculated as described by the Adobe PDF Spec. Estimate for
`vertBearingY' now works better for small glyphs completely above or
below the baseline into account.
* src/cff/cffgload.c (cff_slot_load): `vertBearingX' is now
calculated as described by the Adobe PDF Spec. Vertical metrics
information was always ignored when FT_CONFIG_OPTION_OLD_INTERNALS
was not defined.
* src/truetype/ttgload.c (compute_glyph_metrics): `vertBearingX' is
now calculated as described by the Adobe PDF Spec.
Normally, the SCANMODE instruction (if present) to set the drop-out
mode in a TrueType font is located in the `prep' table only and thus
valid for all glyphs. However, there are fonts like `pala.ttf'
which additionally contain this instruction in the hinting code of
some glyphs (but not all). As a result it can happen that a
composite glyph needs multiple drop-out modes for its subglyphs
since the rendering state gets reset for each subglyph.
FreeType collects the hinted outlines from all subglyphs, then it
sends the data to the rasterizer. It also sends the drop-out mode
-- after hinting has been applied -- and here is the error: It sends
the drop-out mode of the last subglyph only; drop-out modes of all
other subglyphs are lost.
This patch fixes the problem; it adds a second, alternative
mechanism to pass the drop-out mode: For each contour, the
rasterizer now checks the first `tags' array element. If bit 2 is
set, bits 5-7 contain the contour's drop-out mode, overriding the
global drop-out mode.
* include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro.
* src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in
`tags[0]'.
* src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom):
Use bits 3-5 instead of 0-2.
(New_Profile): Set the drop-out mode in the profile's `flags' field.
(Decompose_Curve): Check `tags[0]' and set `dropOutControl' if
necessary.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out
mode.
nor bitmaps can be considered as containing space `glyphs' only.
* src/truetype/ttpload.c (tt_face_load_loca): Handle the case where
a `glyf' table is missing.
* src/truetype/ttgload.c (load_truetype_glyph): Abort if we have no
`glyf' table but a non-zero `loca' entry.
(tt_loader_init): Handle missing `glyf' table.
* src/base/ftobjs.c (FT_Load_Glyph): Undo change 2008-12-05.
* src/sfnt/sfobjs.c (sfnt_load_face): A font with neither outlines
nor bitmaps is scalable.
include/freetype/config/ftheader.h, include/freetype/freetype.h,
src/base/Jamfile, src/base/rules.mk, src/cff/cffdrivr.c,
src/cff/cffgload.c, src/cff/cffgload.h, src/truetype/ttdriver.c,
src/truetype/ttgload.h, src/truetype/ttgload.c, src/type1/t1driver.c,
src/type1/t1gload.h, src/type1/t1gload.c:
Add a new header named FT_ADVANCES_H declaring some new APIs
to extract the advances of one or more glyphs without necessarily
loading their outlines. Also provide 'fast loaders' for the
TrueType, Type1 and CFF font drivers (more to come later)
* autogen.sh: add checks for minimum version of the 'autotools'
stuff.
Pass dropout rules from the TT bytecode interpreter to the
rasterizer; temporarily this is enabled only if
`USE_SCAN_CONVERSION_RULES' is defined.
* include/freetype/ftimage.h (FT_OUTLINE_SMART_DROPOUTS,
FT_OUTLINE_EXCLUDE_STUBS): New flags for for FT_Outline.
* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): Use same mode numbers as given in the
OpenType specification.
Fix mode 4 computation.
(Render_Glyph, Render_Gray_Glyph): Handle new outline flags.
* src/truetype/ttgload.c (TT_Load_Glyph)
[USE_SCAN_CONVERSION_RULES]: Convert scan conversion mode to
FT_OUTLINE_XXX flags.
* src/truetype/ttinterp.c (Ins_SCANCTRL): Enable ppem check.
of the graphics state for subglyphs to...
(TT_Hint_Glyph): This function.
Hinting instructions for a composite glyph apparently refer to the
just hinted subglyphs, not the unhinted, unscaled outline. This
seems to fix Savannah bugs #20973 and (at least partially) #23310.
expanded). This is needed for options like
--includedir='${prefix}/include'.
* builds/unix/detect.mk, configure: Prevent argument expansion in
call to the (real) `configure' script.
* src/truetype/ttgload.c (load_truetype_glyph): Fix compilation if
TT_USE_BYTECODE_INTERPRETER isn't defined.
There exist CFFs which contain opcodes for the Type 1 operators
`hsbw' and `closepath' which are both invalid in Type 2 charstrings.
However, it doesn't harm to support them.
* src/cff/cffgload.c (CFF_Operator): Add `cff_op_hsbw' and
`cff_op_closepath.'
(cff_argument_counts): Ditto.
(cff_decoder_parse_charstrings): Handle Type 1 opcodes 9 (closepath)
and 13 (hsbw) which are invalid in Type 2 charstrings.
recursion depth of 1. This was the maximum value in TrueType 1.0,
and some older fonts don't set this field correctly.
* src/gxvalid/gxvmort1.c
(gxv_mort_subtable_type1_substTable_validate): Fix tracing message.
number of points in contours. Problem reported by Victor Stinner
<victor.stinner@haypocalc.com>.
(TT_Process_Simple_Glyph): Synchronize variable types.
* src/truetype/ttgload.c (tt_loader_init): Re-execute the CVT
program after a change from mono to grayscaling (and vice versa).
Use correct constant for comparison to get `exec->grayscale'.
include/freetype/internal/tttypes.h, src/base/ftgloadr.c,
src/base/ftobjs.c, src/truetype/ttgload.c, src/truetype/ttinterp.c,
src/truetype/ttobjs.c: improvements to native TrueType hinting,
this is a first try, controlled by the FIX_BYTECODE macro in
src/truetype/ttinterp.c
src/autofit/afcjk.c, src/autofit/afhints.c, src/autofit/aflatin.c,
src/autofit/aftypes.h, src/base/ftcalc.c, src/base/ftoutln.c,
src/gzip/ftgzip.c, src/psaux/psconv.c, src/truetype/ttgload.c,
src/type1/t1gload.c:
this is a major patch used to drastically improve the performance
of loading glyphs. This both speeds up loading the glypn vector
themselves and the auto-fitter.
note that we've started using inline assembler with GCC to
implement FT_MulFix, given that this function is so damn
important for the engine's performance.
the resulting speed-up is about 25%.
return error if table is missing.
Check table length in non-FT_OPTIMIZE_MEMORY'ed `tt_face_load_hmtx'.
* src/sfnt/sfobjs.c (sfnt_load_face): Take care of missing metrics
tables. The last change makes Mac bitmap-only font not load and this
fixes it.
* src/truetype/ttgload.c (load_truetype_glyph): Fix compilation error
when FT_CONFIG_OPTION_INCREMENTAL is defined.
after the tables' tags; `hdmx' is TrueType-specific and thus the code
is moved to the truetype module; `get_metrics' is moved here from the
truetype module so that the code can be shared with the cff module.
This pass involves no real changes. That is, the code is moved
verbatim mostly. The only exception is the return value of
`tt_face_get_metrics'.
* include/freetype/internal/sfnt.h, src/sfnt/rules.mk,
src/sfnt/sfdriver.c, src/sfnt/sfnt.c, src/sfnt/sfobjs.c,
src/sfnt/ttload.c, src/sfnt/ttload.h, src/sfnt/ttsbit.c,
src/sfnt/ttsbit.h, src/sfnt/ttsbit0.c: Clean up the SFNT_Interface.
* src/sfnt/ttmtx.c, src/sfnt/ttmtx.h: Metrics-related tables' loading
and parsing code is moved here.
Move `tt_face_get_metrics' here from the truetype module. The return
value is changed from `void' to `FT_Error'.
* include/freetype/internal/fttrace.h: New trace: ttmtx.
* src/truetype/ttpload.c, src/truetype/ttpload.h: `hdmx' loading and
parsing code is moved here.
New function `tt_face_load_prep' splitted from `tt_face_load_fpgm'.
`tt_face_load_fpgm' returns `FT_Err_Ok' if `fpgm' doesn't exist.
* src/cff/cffgload.c, src/cff/cffobjs.c: Update.
* src/truetype/ttgload.c, src/truetype/ttobjs.c: Update.
src/base/ftobjs.c (ft_fake_vertical_metrics): New function to fake the
vertical metrics.
* src/cff/cffgload.c, src/cid/cidgload.c, src/pcf/pcfdrivr.c,
src/type1/t1gload.c, src/winfonts/winfnt.c: Fake the vertical metrics.
The fake metrics is monotone.
* src/truetype/ttgload.c (compute_glyph_metrics): Some fixes and
formattings in vertical metrics faking. There are still rooms for
improvements (and so do the CFF module).
`load_strike_metrics' used to load the strike's metrics.
* src/sfnt/sfdriver.c, src/sfnt/ttsbit.c, src/sfnt/ttsbit.h,
src/sfnt/ttsbit0.c: New function `tt_face_load_strike_metrics'.
* src/pfr/pfrobjs.c (pfr_face_init): Set FT_Bitmap_Size correctly.
* src/winfonts/winfnt.c (FNT_Face_Init): Use `nominal_point_size' for
nominal size unless it is obviously incorrect.
* include/freetype/freetype.h (FT_Bitmap_Size): Update the comments on
FNT driver.
Introduce new size selection interface.
* include/freetype/internal/ftdriver.h (struct FT_Driver_ClassRec_):
Replace `set_char_sizes' and `set_pixel_sizes' by `request_size' and
`select_size'.
* include/freetype/freetype.h (FT_Select_Size, FT_Size_Request_Type,
FT_Size_Request, FT_Request_Size, FT_Select_Size), src/base/ftobjs.c
(FT_Select_Size, FT_Request_Size): API additions to export the new
size selection interface.
* src/base/ftobjs.c (FT_Set_Char_Size, FT_Set_Pixel_Sizes): Use
`FT_Request_Size'.
* include/freetype/internal/ftobjs.h (FT_Match_Size),
src/base/ftobjs.c (FT_Match_Size): New function to match a size
request against `available_sizes'. Drivers supporting bitmap strikes
can use this function to implement `request_size'.
* src/bdf/bdfdrivr.c, src/cid/cidobjs.c, src/cid/cidobjs.h,
src/cid/cidriver.c, src/pcf/pcfdrivr.c, src/type1/t1driver.c,
src/type1/t1objs.c, src/type1/t1objs.h, src/type42/t42drivr.c,
src/type42/t42objs.c, src/type42/t42objs.h, src/winfonts/winfnt.c:
Update to new size selection interface.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/truetype/ttdriver.c, src/truetype/ttgload.c,
src/truetype/ttobjs.c, src/truetype/ttobjs.h: Update to new size
selection interface.
Make `strike_index' FT_ULong and always defined.
Use `load_strike_metrics' provided by SFNT interface.
- fixing apinames.c, adding support for Watcom and Borland compilers
- adding generation of exported symbols list to the build system, including the Unix one !!
sorry Werner, I have no time to document this in ChangeLog at the moment
ttmetrics here. TrueType fonts with only sbits always have
ttmetrics.valid set to false.
* src/truetype/ttgload.c (TT_Load_Glyph): Check that ttmetrics is
valid before loading outline glyph.
* src/cache/ftcimage.c (FTC_INode_New): Fix a memory leak.
TT_Done_Context and rename TT_Destroy_Context to TT_Done_Context with
slight changes.
* src/truetype/ttobjs.h (tt_slot_init): New function.
* src/truetype/ttobjs.c (tt_driver_init): Initialize execution context
here.
(tt_slot_init): New function to create extra points for the internal
glyph loader. We then use it directly, instead of face's glyph loader,
when loading glyph.
* src/truetype/ttdriver.c: Use tt_slot_init for glyph slot
initialization.
(TT_Load_Glyph): Load flag dependencies are handled here.
Return error if size is NULL.
* src/truetype/ttgload.c: Heavy cleanup and refactor.
(TT_Hint_Glyph): New funcion to hint a zone, prepared by caller.
(TT_Process_Simple_Glyph): Use loader->pp's instead of recalculating.
Use TT_Hint_Glyph.
No need to save/restore loader->stream before/after
TT_Vary_Get_Glyph_Deltas now.
(TT_LOADER_SET_PP): New macro to calculate and set the four phantom points.
(TT_Process_Composite_Component, TT_Process_Composite_Glyph,
load_truetype_glyph): Refactor load_truetype_glyph into these three functions.
Never set exec->glyphSize to 0. (close#13107)
Forget glyph frame before calling TT_Process_Simple_Glyph.
(TT_Load_Glyph, load_sbit_image, tt_loader_init): Refactor TT_Load_Glyph into
these three functions.
Set various fields of `glyph' here, instead of in load_truetype_glyph
and compute_glyph_metrics.
removing compiler warnings (Visual C++ /W4)
* Jamfile, src/otvalid/{otvcommn.h,otvgdef.c,otvgpos.c,otvgsub.c,
otvjstf.c}: modified the code to use a different pre-processor trick
to implement the OTV_NEST1, OTV_NEST2 and OTV_NEST3 macros. The code
now compiles neatly with Visual C++. The 'otvalid' module has been
put in the Jamfile build again.
ft_glyphslot_grid_fit_metrics.
* src/truetype/ttgload.c (compute_glyph_metrics): Use
ft_glyphslot_grid_fit_metrics.
* src/cff/cffgload.c (cff_slot_load), src/cid/cidgload.c
(cid_slot_load_glyph), src/type1/t1gload.c (T1_Load_Glyph): Use
ft_glyphslot_grid_fit_metrics.
FT_Outline_Get_CBox is called twice.
* src/base/ftsynth.c (FT_GlyphSlot_Embolden): Modify metrics to more
reasonable values when emboldening outline glyphs. The theoretic
ones are unrealistic.
halved.
* src/base/ftsynth.c (FT_GlyphSlot_Embolden): Change the default
strength.
Don't increase slot->advance.y.
* include/freetype/freetype.h (FREETYPE_MINOR): Set to 2.
(FREETYPE_PATCH): Set to 0.
* builds/unix/configure.ac (version_info): Set to 9:9:3.
Currently, we are still binary compatible.
* builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj: s/219/2110/, s/2.1.9/2.1.10/.
* builds/freetype.mk (refdoc), README, Jamfile (RefDoc):
s/2.1.9/2.1.10/.
* docs/CHANGES, docs/VERSION.DLL: Updated.
* ChangeLog: Split off older entries into...
* ChangeLog.20, ChangeLog.21: These new files.
The next release will be 2.2.0, so don't worry about source code
backwards compatibility.
* include/freetype/ftimage.h (FT_Outline_MoveToFunc,
FT_Outline_LineToFunc, FT_Outline_ConicToFunc,
FT_Outline_CubicToFunc, FT_SpanFunc, FT_Raster_RenderFunc),
include/freetype/ftrender.h (FT_Glyph_TransformFunc,
FT_Renderer_RenderFunc, FT_Renderer_TransformFunc): Decorate
parameters with `const' where appropriate.
* src/sfnt/ttsbit.c (tt_face_load_sbit_image): Compute vertBearingY
to make glyphs centered vertically.
* src/truetype/ttgload.c (compute_glyph_metrics): Compute
vertBearingY to make glyphs centered vertically.
Fix some bugs in vertical metrics:
. loader->pp3.y and loader->pp4.y are in 26.6 format, not in font
units.
. As we use the glyph's cbox to calculate the top bearing now
there iss no need to adjust `top'.
* src/otvalid/otvcommn.h (OTV_OPTIONAL_TABLE): Use FT_UShort to be
in sync with OTV_OPTIONAL_OFFSET. Reported by YAMATO Masatake.
* docs/release: Update.
* src/autofit/*: Add copyright messages.
Formatting.
* src/autofit/afhints.c (af_glyph_hints_done): Don't use
`AF_Dimension' but `int' for loop counter.
* src/autofit/aflatin.c (af_latin_metrics_init_widths): Don't use
`AF_Dimension' but `int' for loop counter.
Use proper enumeration value for `render_mode'.
(af_latin_metrics_scale_dim): Don't shadow variables.
(af_latin_hints_compute_segments): Use proper cast for `major_dir'
and `segment_dir'.
(af_latin_align_linked_edge, af_latin_hint_edges): Fix arguments of call to
`af_latin_compute_stem_width'.
(af_latin_hints_apply): Don't use `AF_Dimension' but `int' for loop
counter.
* src/base/ftdbgmem.c (ft_mem_table_get_source, FT_DumpMemory): Use
proper cast for memory allocation.
* src/cff/cffdrivr.c (cff_get_kerning): Use proper cast for
initialization of `sfnt'.
* src/sfnt/sfdriver.c: Include `ttkern.h'.
* src/sfnt/ttkern.c (tt_face_get_kerning): Don't shadow variables.
* src/truetype/ttgload.c: Include `ttpload.h'.
* src/truetype/ttpload.c (tt_face_load_loca) [FT_OPTIMIZE_MEMORY]:
Remove redundant variable.
drastically reduce the heap usage of FreeType, especially in the case
of memory-mapped files. The idea is to avoid loading and decoding tables
in the heap, and instead access the raw data whenever possible (i.e.
when it doesn't compromise performance).
This had several impacts: first, opening vera.ttf uses a ridiculous amount
of memory (when the FT_Library footprint is accounted for), until you start
loading glyphs. Even then, you'll save at least 20 Kb compared to the non
optimized case. performance of various operations, including open/close
has also been dramatically improved.
More optimisations to come. The auto-hinter eats memory like crazy? This
must be stopped...
src/truetype/ttpload.c, src/truetype/ttpload.h, src/truetype/ttgload.c:
added the temporary configuration FT_OPTIMIZE_MEMORY to control various
optimizations used to reduce the heap footprint of memory-mapped TrueType
files.
* src/truetype/ttpload.c (tt_face_load_loca, tt_face_get_location,
tt_face_done_loca): when FT_OPTIMIZE_MEMORY is set, the locations table
is read directly from memory-mapped streams, instead of being decoded
into the heap.
* src/truetype/ttpload.c: only load the CVT and fpgm tables when the
bytecode interpreter is compiled in.
* src/truetype/ttgload.c (TT_Process_Simple_Glyph): Don't shift
points vertically before hinting.
* docs/CHANGES: Updated.
* src/cache/ftcglyph.c (FTC_GNode_UnselectFamily,
FTC_GCache_Lookup): A new try to fix comparison with zero.
overflow.
* src/sfnt/ttload.c (tt_face_load_hdmx): Protect against bad input.
Don't use FT_QNEW_ARRAY but FT_NEW_ARRAY to make deallocation work
in case of failure.
* src/sfnt/ttsbit.c (Load_SBit_Range): Check range intervals.
(tt_face_load_sbit_strikes): Allocate `strike_sbit_ranges' after
frame test.
* src/truetype/ttgload.c (TTLoad_Simple_Glyph): Add assertion for
`flag'.
bytecode interpreter. This is an experimental feature which
should probably be made optional.
* src/truetype/ttgload.c (TT_Process_Simple_Glyph,
load_truetype_glyph): Move the code to set the pedantic_hinting flag
to...
(TT_Load_Glyph): Here.
Set `grayscale' flag except for `FT_LOAD_TARGET_MONO'.
* src/truetyep/ttinterp.c (Ins_GETINFO): Return MS rasterizer
version 1.7.
Return rotation and stretching info only if glyph is rotated or
stretched, respectively.
Handle grayscale info.
* src/truetype/ttinterp.h (TT_ExecContextRec): Add `grayscale'
member.
cff_slot_done, cff_slot_init, cff_face_init, cff_face_done): Access
root fields directly.
* src/cff/cffdrivr.c (Load_Glyph): Access root fields directly.
* src/truetype/ttgload.c (TT_Process_Simple_Glyph): Save current
frame before calling TT_Vary_Get_Glyph_Deltas.
* src/pcf/pcfdrivr.c (PCF_CMapRec): Rename `cmap' to `root' for
consistency.
(pcf_cmap_init, pcf_cmap_done, pcf_cmap_char_index,
pcf_cmap_char_next): Don't use PCF_XXX but FT_XXX arguments which
are typecast to the proper PCF_XXX types within the function.
Update code accordingly.
(pcf_cmap_class): Remove casts.
(PCF_Face_Done, PCF_Face_Init, PCF_Set_Pixel_Size): Don't use
PCF_XXX but FT_XXX arguments which are typecast to the proper
PCF_XXX types within the function.
Update code accordingly.
Use FT_CALLBACK_DEF throughout.
(PCF_Set_Point_Size): New wrapper function.
(PCF_Glyph_Load, pcf_driver_requester): Use FT_CALLBACK_DEF.
(pcf_driver_class): Remove casts.
* src/pcf/pcfutil.c: Use FT_LOCAL_DEF.
* src/pcf/pcfutil.h: Include FT_CONFIG_CONFIG_H.
Use FT_BEGIN_HEADER and FT_END_HEADER.
Use FT_LOCAL.
2004-04-24 George Williams <gww@silcom.com>
Add support for Apple's distortable font technology (in GX fonts).
* devel/ftoption.h, include/freetype/config/ftoption.h
(TT_CONFIG_OPTION_GX_VAR_SUPPORT): New macro.
* include/freetype/ftmm.h (FT_Var_Axis, FT_Var_Named_Style,
FT_MM_Var): New structures.
(FT_Get_MM_Var, FT_Set_Var_Design_Coordinates,
FT_Set_Var_Blend_Coordinates): New function declarations.
* include/freetype/internal/services/svmm.h (FT_Get_MM_Var_Func,
FT_Set_Var_Design_Func): New typedefs.
Update MultiMasters service.
* include/freetype/internal/tttypes.h
[TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Include FT_MULTIPLE_MASTERS_H.
(GX_Blend) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: New typedef.
(TT_Face) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: New members `doblend'
and `blend'.
* include/freetype/tttags.h (TTAG_avar, TTAG_cvar, TTAG_gvar): New
macros.
* include/freetype/internal/fttrace.h: Add `ttgxvar'.
* src/base/ftmm.c (FT_Get_MM_Var, FT_Set_Var_Design_Coordinates,
FT_Set_Var_Blend_Coordinates): New functions.
* src/sfnt/sfobjs.c (sfnt_load_face)
[TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Set FT_FACE_FLAG_MULTIPLE_MASTERS
flag for GX var fonts.
* src/truetype/ttgxvar.c, src/truetype/ttgxvar.h: New files.
* src/truetype/truetype.c [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Include
ttgxvar.c.
* src/truetype/ttdriver.c [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Include
FT_MULTIPLE_MASTERS_H, FT_SERVICE_MULTIPLE_MASTERS_H, and ttgxvar.h.
(tt_service_gx_multi_masters) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]:
New service.
(tt_services) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Updated.
* src/truetype/ttgload.c [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Include
ttgxvar.h.
(TT_Process_Simple_Glyph, load_truetype_glyph)
[TT_CONFIG_OPTION_GX_VAR_SUPPORT] :Support GX var fonts.
* src/truetype/ttobjs.c [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Include
ttgxvar.h.
(tt_done_face) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Call
tt_done_blend.
* src/truetype/ttpload.c [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Include
ttgxvar.h.
(tt_face_load_cvt) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Call
tt_face_vary_cvt.
* src/truetype/rules.mk (TT_DRV_SRC): Add ttgxvar.c.
* src/type1/t1driver.c (t1_service_multi_masters): Add T1_Get_MM_Var
and T1_Set_Var_Design.
* src/type1/t1load.c (FT_INT_TO_FIXED, FT_FIXED_TO_INT): New macros.
(T1_Get_MM_Var, T1_Set_Var_Design): New functions.
* src/type1/t1load.h (T1_Get_MM_Var, T1_Set_Var_Design): New
function declarations.
src/ttdriver.c (Load_Glyph): Change type of `glyph_index' to
FT_UInt. From Lex Warners.
* src/sfnt/ttload.c (tt_face_load_sfnt_header): Really fix change
from 2004-03-19.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Use `ft_strlen'.
* src/pcf/pcfutil.c, src/pcf/pcfutil.h: Decorate functions with
`static.'.
Remove unused function `RepadBitmap'.
* src/pcf/pcfdrivr.c: Don't include pcfutil.h.
* include/freetype/internal/tttypes.h (TT_LoaderRec): Add
`top_bearing', `vadvance', `pp3, and `pp4'.
* src/autofit/afloader.c (af_loader_load_g): Handle two more points.
* src/autohint/ahhint.c (ah_hinter_load): Handle two more points.
* src/truetype/ttgload.c (Get_VMetrics): New function.
(TT_Load_Simple_Glyph, TT_Process_Simple_Glyph): Handle two more
points.
(load_truetype_glyph): Use Get_VMetrics.
Handle two more points.
(compute_glyph_metrics): Thanks to vertical phantom points we now
can always compute `advance_height' and `top_bearing'.
* src/truetype/ttobjs.h (TT_SubglyphRec): Add vertical phantom
points.
* src/autohint/ahglyph.c (ah_outline_load): Fix allocation of
`news'.
Converting some files to Unix end-of-line convention.
FTC_FaceID.
* src/cff/cffdrivr.c (cff_get_cmap_info): Call sfnt module's TT CMap
Info service function if the cmap comes from sfnt. Return 0 if the
cmap is sythesized in cff module.
Formatting; updating copyright.
src/autohint/ahhint.c, src/base/ftgloadr.c,
src/base/ftglyph.c, src/base/ftoutln.c,
src/base/ftstroke.c, src/cff/cffload.c, src/truetype/ttgload.c,
src/truetype/ttinterp.c:
introducing the new FT_ARRAY_COPY and FT_ARRAY_MOVE macros
to make copying arrays easier
computation of glyph_index.
(FNT_Size_Set_Pixels): To find a strike, first check pixel_height
only, then try to find a better hit by comparing pixel_width also.
Without this fix it isn't possible to access all strikes.
Also compute metrics.max_advance to be in sync with other bitmap
drivers.
* src/base/ftobjs.c (FT_Set_Char_Size): Remove redundant code.
(FT_Set_Pixel_Size): Assign value to `metrics' after validation of
arguments.
Synchronize computation of height and width for bitmap strikes. The
`width' field in the FT_Bitmap_Size structure is now only useful to
enumerate different strikes. The `max_advance' field of the
FT_Size_Metrics structure should be used to get the (maximum) width
of a strike.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Don't use AVERAGE_WIDTH for
computing `available_sizes->width' but make it always equal to
`available_sizes->height'.
* src/pcf/pcfread.c (pcf_load_font): Don't use RESOLUTION_X for
computing `available_sizes->width' but make it always equal to
`available_sizes->height'.
* src/truetype/ttdriver.c (Set_Pixel_Sizes): Pass only single
argument to function.
* src/psnames/psmodule.c (ps_unicode_value): Handle `.' after
`uniXXXX' and `uXXXX[X[X]]'.
* src/bdf/bdfdrivr.c: s/FT_Err_/BDF_Err/.
* src/cache/ftccache.c, src/cache/ftcsbits.c, src/cache/ftlru.c:
s/FT_Err_/FTC_Err_/.
* src/cff/cffcmap.c: s/FT_Err_/CFF_Err_/.
* src/pcf/pcfdrivr.c: s/FT_Err_/PCF_Err_/.
* src/psaux/t1cmap.c: Include psauxerr.h.
s/FT_Err_/PSaux_Err_/.
* src/pshinter/pshnterr.h: New file.
* src/pshinter/rules.mk: Updated.
* src/pshinter/pshalgo.c, src/pshinter/pshrec.c: Include pshnterr.h.
s/FT_Err_/PSH_Err_/.
* src/pfr/pfrdrivr.c, src/pfr/pfrobjs.c, src/pfr/pfrsbit.c:
s/FT_Err_/PFR_Err_/.
* src/sfnt/sfdriver.c, src/sfnt/sfobjs.c, src/sfnt/ttcmap0.c,
src/sfnt/ttload.c: s/FT_Err_/SFNT_Err_/.
* src/truetype/ttgload.c: s/FT_Err_/TT_Err_/.
* src/gzip/ftgzip.c: Load FT_MODULE_ERRORS_H and define
FT_ERR_PREFIX and FT_ERR_BASE.
s/FT_Err_/Gzip_Err_/.
correctly.
* src/pshinter/pshglob.c (psh_globals_new): Change calculation of
dim->stdw.count to avoid compiler problem.
* src/truetype/ttgload.c (TT_Load_Simple_Glyph): Move the block
variables to the beginning of the function to avoid compiler
problems.
Add casts necessary for 16bit compilers.
* src/pfr/rules.mk (PFR_DRV_SRC): Add pfrsbit.c.
(PFR_DRV_H): Add pfrtypes.h.
* include/freetype/config/ftconfig.h: s/__MWKS__/__MWERKS__/.
* src/pfr/pfrsbit.c (pfr_bitwriter_init): Change type of third
argument to FT_Bool.
(pfr_lookup_bitmap_data): Change type of third and fourth argument
to FT_UInt. Updated caller.
(pfr_load_bitmap_bits): Change type of fourth argument to FT_Bool.
include/freetype/internal/ftobjs.h,
include/freetype/internal/psaux.h, src/cid/cidgload.c,
src/psaux/psobjs.c, src/psaux/t1decode.c, src/psaux/psobjs.h,
src/pshinter/pshrec.c, src/pshinter/pshalgo.c,
src/psnames/psmodule.c, src/raster/ftraster.c, src/sfnt/sfobjs.c,
src/smooth/ftgrays.c, src/smooth/ftsmooth.c, src/truetype/ttobjs.c,
src/truetype/ttdriver.c, src/truetype/ttgload.c, src/type1/t1afm.c,
src/type1/t1gload.c, src/type1/t1gload.h, src/type1/t1load.c,
src/type1/t1objs.c, src/type42/t42parse.c, src/type42/t42parse.h:
Many casts and slight argument type changes to make it work with
a 16bit compiler.
[TT_CONFIG_OPTION_BYTECODE_INTERPRETER]: Call
FT_GlyphLoader_CheckPoints before adding phantom points. This fixes
a segfault bug with fonts (e.g. htst3.ttf) which have nested
subglyphs more than one level deep. Reported by Anthony Fok.
* include/freetype/config/ftoption.h: Define
TT_CONFIG_OPTION_BYTECODE_INTERPRETER,
TT_CONFIG_OPTION_COMPILE_UNPATENTED_HINTING, and
TT_CONFIG_OPTION_FORCE_UNPATENTED_HINTING to make it the new
default.
want to list them all here. The operations performed were all logical
transformations of the sources:
- trying to convert all enums and constants to CAPITALIZED_STYLE, with
#define definitions like
#define my_old_constants MY_NEW_CONSTANT
- big, big update of the documentation comments
* include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c,
include/freetype/ftimage.h: adding support for LCD-optimized rendering
though the new constants/enums:
FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V
FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V
this is still work in progress, don't expect everything to work correctly
though most of the features have been implemented.
* adding new FT_LOAD_XXX flags, used to specify both hinting and rendering
targets:
FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering
FT_LOAD_TARGET_MONO :: monochrome bitmaps
FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering
FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering
note that FT_LOAD_TARGET_NORMAL is 0, which means that the default
behaviour of the font engine is _unchanged_.
preferences. The header freetype.h is not now affected, the interface is
specified via an FT_Parameter, the pointer to the interface is hidden in an
internal part of the face record, and all the definitions are in ftincrem.h.
bug that prevented FreeType 2.x and FreeType 1.x to produce
bit-by-bit identical monochrome glyph bitmaps with native TrueType
hinting. The culprit was a single-bit flag that wasn't set
correctly by the TrueType glyph loader !!
* src/otlayout/otlayout.h,
src/otlayout/otlbase.c,
src/otlayout/otlbase.h,
src/otlayout/otlconf.h,
src/otlayout/otlgdef.c,
src/otlayout/otlgdef.h,
src/otlayout/otlgpos.c,
src/otlayout/otlgpos.h,
src/otlayout/otlgsub.c,
src/otlayout/otlgsub.h,
src/otlayout/otljstf.c,
src/otlayout/otljstf.h,
src/otlayout/otltable.c,
src/otlayout/otltable.h,
src/otlayout/otltags.h:
adding OpenType Layout source files. Module is still incomplete
changed the names of memory macros. Examples:
MEM_Set => FT_MEM_SET
MEM_Copy => FT_MEM_COPY
MEM_Move => FT_MEM_MOVE
ALLOC => FT_ALLOC
FREE => FT_FREE
REALLOC = >FT_REALLOC
FT_NEW was introduced to allocate a new object from a _typed_
pointer..
note that ALLOC_ARRAY and REALLOC_ARRAY have been replaced
by FT_NEW_ARRAY and FT_RENEW_ARRAY which take _typed_ pointer
arguments.
This results in _lots_ of sources being changed, but makes the
code more generic and less error-prone..
unpleasant overwrites in the case of invalid glyph data (found in
the output of buggy font converters)
the computation of auto-hinted stem widths has been modified to
avoid certain color fringes in LCD-decimation rendering (a.k.a.
"ClearType")
library when dealing with certain weird fonts (like "Stalingrad",
in "sadn.pfb". This font has no full font name entry.. )
* src/base/ftoutln.c, include/freetype/ftoutln.h: added the
FT_Outline_Check API to check the consistency of outline data
* src/base/ftobjs.c (FT_Load_Glyph): added a call to the new
FT_Outline_Check to ensure that loaded glyphs are valid. This
allows certain fonts like "tt1095m_.ttf" to be loaded even though
it appears they contain really funky glyphs..
there still is a bug there though.. !!
(FT_Load_Glyph): "fixed" the bug that prevented embedded bitmaps from
begin loaded when the auto-hinter is used.. This actually is a hack
but will be enough until the internal re-design scheduled for
FreeType 2.1
some of the exported functions should only be used by applications
that need to implement custom cache types
* src/truetype/ttgload.c: fixed a nasty bug that prevent composites
from loading correctly. Believe it or not, this was due to an invalid
macro definition !!
details.
* include/freetype/internal/cfferrs.h,
include/freetype/internal/tterrors.h,
include/freetype/internal/t1errors.h: Removed. Replaced with files
local to the module. All extra error codes have been moved to
`fterrors.h'.
* src/sfnt/ttpost.h: Move error codes to `fterrors.h'.
* src/autohint/aherrors.h, src/cache/ftcerror.h, src/cff/cfferrs.h,
src/cid/ciderrs.h, src/pcf/pcferror.h, src/psaux/psauxerr.h,
src/psnames/psnamerr.h, src/raster/rasterrs.h, src/sfnt/sferrors.h,
src/smooth/ftsmerrs.h, src/truetype/tterrors.h,
src/type1/t1errors.h, src/winfonts/fnterrs.h: New files defining the
error names for the module it belongs to.
* include/freetype/ftmoderr.h: New file, defining the module error
offsets. Its structure is similar to `fterrors.h'.
* include/freetype/fterrors.h (FT_NOERRORDEF): New macro.
(FT_ERRORDEF): Redefined to use module error offsets.
All internal error codes are now public; unused error codes have
been removed, some are new.
* include/freetype/config/ftheader.h (FT_MODULE_ERRORS_H): New
macro.
* include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_USE_MODULE_ERRORS): New macro.
All other source files have been updated to use the new error codes;
some already existing (internal) error codes local to a module have
been renamed to give them the same name as in the base module.
All make files have been updated to include the local error files.
* src/cid/cidtokens.h: Replaced with...
* src/cid/cidtoken.h: This file for 8+3 consistency.
* src/raster/ftraster.c: Use macros for header file names.
* include/freetype/config/ftheader.h: removed obsolete macros like
FT_SOURCE_FILE, etc.. and added cache-specific macro definitions that
were previously defined in <freetype/ftcache.h>. Added comments to be
included in a new API Reference section.
* src/*/*: removed the use of FT_SOURCE_FILE, etc.. now, each component
needs to added its own directory to the include path at compile time.
Modified all "rules.mk" and "descrip.mms" accordingly..
include/freetype/internal/internal.h: fixed header inclusion macros
to use direct definitions. This is the only way to do these things
in a portable way :-( The rest of the code should follow shortly
though everything compiles now..
* builds/compiler/intelc.mk, builds/compiler/watcom.mk,
builds/win32/detect.mk: added support for the Intel C/C++ compiler,
as well as _preliminary_ (read: doesn't work !!) support for Watcom.
Also added a new setup target. Type "make setup list" for a list
of supported command-line compilers on Win32..
Removed. ANSI C doesn't (explicitly) allow macro expansion in
arguments using `##'.
(FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE): Use directory
names directly. Make them configurable. Use `##' to strip leading
and trailing spaces from arguments.
* builds/unix/ft2unix.h: Adapted.
* src/base/ftsystem.c (ft_alloc, ft_realloc, ft_free, ft_io_stream,
ft_close_stream): Use FT_CALLBACK_DEF.
* builds/unix/ftsystem.c: Use new header scheme.
(FT_Done_Memory): Use free() from FT_Memory structure.
* src/base/ftinit.c, src/base/ftmac.c: Header scheme fixes.
* include/freetype/config/ft2build.h (FT2_CONFIG_ROOT,
FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE,
FT_SOURCE_FILE): Use `##' operator to be really ANSI C compliant.
Werner Lemberg