Normally, the SCANMODE instruction (if present) to set the drop-out
mode in a TrueType font is located in the `prep' table only and thus
valid for all glyphs. However, there are fonts like `pala.ttf'
which additionally contain this instruction in the hinting code of
some glyphs (but not all). As a result it can happen that a
composite glyph needs multiple drop-out modes for its subglyphs
since the rendering state gets reset for each subglyph.
FreeType collects the hinted outlines from all subglyphs, then it
sends the data to the rasterizer. It also sends the drop-out mode
-- after hinting has been applied -- and here is the error: It sends
the drop-out mode of the last subglyph only; drop-out modes of all
other subglyphs are lost.
This patch fixes the problem; it adds a second, alternative
mechanism to pass the drop-out mode: For each contour, the
rasterizer now checks the first `tags' array element. If bit 2 is
set, bits 5-7 contain the contour's drop-out mode, overriding the
global drop-out mode.
* include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro.
* src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in
`tags[0]'.
* src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom):
Use bits 3-5 instead of 0-2.
(New_Profile): Set the drop-out mode in the profile's `flags' field.
(Decompose_Curve): Check `tags[0]' and set `dropOutControl' if
necessary.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out
mode.
nor bitmaps can be considered as containing space `glyphs' only.
* src/truetype/ttpload.c (tt_face_load_loca): Handle the case where
a `glyf' table is missing.
* src/truetype/ttgload.c (load_truetype_glyph): Abort if we have no
`glyf' table but a non-zero `loca' entry.
(tt_loader_init): Handle missing `glyf' table.
* src/base/ftobjs.c (FT_Load_Glyph): Undo change 2008-12-05.
* src/sfnt/sfobjs.c (sfnt_load_face): A font with neither outlines
nor bitmaps is scalable.
include/freetype/config/ftheader.h, include/freetype/freetype.h,
src/base/Jamfile, src/base/rules.mk, src/cff/cffdrivr.c,
src/cff/cffgload.c, src/cff/cffgload.h, src/truetype/ttdriver.c,
src/truetype/ttgload.h, src/truetype/ttgload.c, src/type1/t1driver.c,
src/type1/t1gload.h, src/type1/t1gload.c:
Add a new header named FT_ADVANCES_H declaring some new APIs
to extract the advances of one or more glyphs without necessarily
loading their outlines. Also provide 'fast loaders' for the
TrueType, Type1 and CFF font drivers (more to come later)
* autogen.sh: add checks for minimum version of the 'autotools'
stuff.
Pass dropout rules from the TT bytecode interpreter to the
rasterizer; temporarily this is enabled only if
`USE_SCAN_CONVERSION_RULES' is defined.
* include/freetype/ftimage.h (FT_OUTLINE_SMART_DROPOUTS,
FT_OUTLINE_EXCLUDE_STUBS): New flags for for FT_Outline.
* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): Use same mode numbers as given in the
OpenType specification.
Fix mode 4 computation.
(Render_Glyph, Render_Gray_Glyph): Handle new outline flags.
* src/truetype/ttgload.c (TT_Load_Glyph)
[USE_SCAN_CONVERSION_RULES]: Convert scan conversion mode to
FT_OUTLINE_XXX flags.
* src/truetype/ttinterp.c (Ins_SCANCTRL): Enable ppem check.
of the graphics state for subglyphs to...
(TT_Hint_Glyph): This function.
Hinting instructions for a composite glyph apparently refer to the
just hinted subglyphs, not the unhinted, unscaled outline. This
seems to fix Savannah bugs #20973 and (at least partially) #23310.
expanded). This is needed for options like
--includedir='${prefix}/include'.
* builds/unix/detect.mk, configure: Prevent argument expansion in
call to the (real) `configure' script.
* src/truetype/ttgload.c (load_truetype_glyph): Fix compilation if
TT_USE_BYTECODE_INTERPRETER isn't defined.
There exist CFFs which contain opcodes for the Type 1 operators
`hsbw' and `closepath' which are both invalid in Type 2 charstrings.
However, it doesn't harm to support them.
* src/cff/cffgload.c (CFF_Operator): Add `cff_op_hsbw' and
`cff_op_closepath.'
(cff_argument_counts): Ditto.
(cff_decoder_parse_charstrings): Handle Type 1 opcodes 9 (closepath)
and 13 (hsbw) which are invalid in Type 2 charstrings.
recursion depth of 1. This was the maximum value in TrueType 1.0,
and some older fonts don't set this field correctly.
* src/gxvalid/gxvmort1.c
(gxv_mort_subtable_type1_substTable_validate): Fix tracing message.
number of points in contours. Problem reported by Victor Stinner
<victor.stinner@haypocalc.com>.
(TT_Process_Simple_Glyph): Synchronize variable types.
* src/truetype/ttgload.c (tt_loader_init): Re-execute the CVT
program after a change from mono to grayscaling (and vice versa).
Use correct constant for comparison to get `exec->grayscale'.
include/freetype/internal/tttypes.h, src/base/ftgloadr.c,
src/base/ftobjs.c, src/truetype/ttgload.c, src/truetype/ttinterp.c,
src/truetype/ttobjs.c: improvements to native TrueType hinting,
this is a first try, controlled by the FIX_BYTECODE macro in
src/truetype/ttinterp.c
src/autofit/afcjk.c, src/autofit/afhints.c, src/autofit/aflatin.c,
src/autofit/aftypes.h, src/base/ftcalc.c, src/base/ftoutln.c,
src/gzip/ftgzip.c, src/psaux/psconv.c, src/truetype/ttgload.c,
src/type1/t1gload.c:
this is a major patch used to drastically improve the performance
of loading glyphs. This both speeds up loading the glypn vector
themselves and the auto-fitter.
note that we've started using inline assembler with GCC to
implement FT_MulFix, given that this function is so damn
important for the engine's performance.
the resulting speed-up is about 25%.
return error if table is missing.
Check table length in non-FT_OPTIMIZE_MEMORY'ed `tt_face_load_hmtx'.
* src/sfnt/sfobjs.c (sfnt_load_face): Take care of missing metrics
tables. The last change makes Mac bitmap-only font not load and this
fixes it.
* src/truetype/ttgload.c (load_truetype_glyph): Fix compilation error
when FT_CONFIG_OPTION_INCREMENTAL is defined.
after the tables' tags; `hdmx' is TrueType-specific and thus the code
is moved to the truetype module; `get_metrics' is moved here from the
truetype module so that the code can be shared with the cff module.
This pass involves no real changes. That is, the code is moved
verbatim mostly. The only exception is the return value of
`tt_face_get_metrics'.
* include/freetype/internal/sfnt.h, src/sfnt/rules.mk,
src/sfnt/sfdriver.c, src/sfnt/sfnt.c, src/sfnt/sfobjs.c,
src/sfnt/ttload.c, src/sfnt/ttload.h, src/sfnt/ttsbit.c,
src/sfnt/ttsbit.h, src/sfnt/ttsbit0.c: Clean up the SFNT_Interface.
* src/sfnt/ttmtx.c, src/sfnt/ttmtx.h: Metrics-related tables' loading
and parsing code is moved here.
Move `tt_face_get_metrics' here from the truetype module. The return
value is changed from `void' to `FT_Error'.
* include/freetype/internal/fttrace.h: New trace: ttmtx.
* src/truetype/ttpload.c, src/truetype/ttpload.h: `hdmx' loading and
parsing code is moved here.
New function `tt_face_load_prep' splitted from `tt_face_load_fpgm'.
`tt_face_load_fpgm' returns `FT_Err_Ok' if `fpgm' doesn't exist.
* src/cff/cffgload.c, src/cff/cffobjs.c: Update.
* src/truetype/ttgload.c, src/truetype/ttobjs.c: Update.